SEARCH · Engineering Papers

Results for “surface observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Experimental measurement and theoretical modeling of microwave scattering and the structure of the sea surface influencing radar observations from space

The electromagnetic (EM) bias 'epsilon' is an error present in radar altimetry of the ocean due to the nonuniform reflection from wave troughs and crests. The EM bias is defined as the difference between the mean reflecting surface and the mean sea surface. A knowledge of the EM bias is necessary to permit error reduction in mean sea level measurements by satellite radar altimeters. Direct measurements of the EM bias were made from a Shell Offshore oil production platform in the Gulf of Mexico for a six month period during 1989 and 1990. Measurements of the EM bias were made at 5 and 14 Ghz. During the EM bias experiments by Melville et al., a wire wave gauge was used to obtain the modulation of the high frequency waves by the low frequency waves. It became apparent that the EM bias was primarily caused by the modulation of the short waves. This was reported by Arnold et al. The EM bias is explained using physical optics scattering and an empirical model for the short wave modulation. Measurements of the short wave modulation using a wire wave gauge demonstrated a linear dependence of the normalized bias on the short wave modulation strength, M. The theory accurately predicts this dependence by the relation epsilon = -alphaMH sub 1/3. The wind speed dependence of the normalized bias is explained by the dependence of the short wave modulation strength on the wind speed. While other effects such as long wave tilt and curvature will have an effect on the bias, the primary cause of the bias is shown to be due to the short wave modulation. This report will present a theory using physical optics scattering and an empirical model of the short wave modulation to estimate the EM bias. The estimated EM bias will be compared to measurements at C and Ku bands.

Arnold, David↗

NASA NTRS1992

Groundbased near-IR observations of the surface of Venus

We present images of the nightside of Venus taken in the near-infrared windows at 1.0, 1.1, 1.18, 1.28, 1.31, and 2.3 microns with the new infrared camera/spectrometer IRIS on the Anglo-Australian Telescope. These data were taken in spectral-mapping mode. This technique involves scanning the telescope perpendicular to the slit, while collecting spectra at successive slit positions across the planet. We produce data cubes with one spectral and two spatial dimensions. Images can be extracted over any wavelength regions. Each image has square pixels of 0.8 inch resolution. We reduced the scattered light from the sunlit crescent in images extracted from each window by subtracting images taken on either side of the window, where the Venus atmosphere is opaque. Unlike the short wavelength windows, which reveal thermal contrasts that originate primarily from the surface and deep atmosphere, the emission in the 2.3 microns window is produced at much higher altitudes (30-40 km). Emission contrasts seen near 2.3 microns are associated with horizontal variations in the cloud optical depths, and have rotation periods of about six days. We detect large contrasts in infrared emission (20-40 percent) across the disc of Venus in the 1.0-, 1.1-, 1.18-, 1.28-, and 1.31-micron images. Contrasts at these wavelengths may be due to a combination of variations in the optical depths of the overlying sulfuric acid clouds and differences in surface emission. Comparison with the 2.3-micron images show that the patterns seen in the 1.28- and 1.31-micron windows are consistent with cloud optical depth variations alone and require no contribution from the surface. However, images at 1.0, 1.1, and 1.8 microns from July 1991 show a dark feature having a contrast that increases with decreasing wavelength. This behavior is contrary to that expected of cloud absorption. Images taken on three successive days in October show another dark feature that is stationary with respect to the surface. These regions of lower emission correspond closely to the high-altitude surface regions of Beta Regio and Aphrodite Terra. The images can potentially reveal the near-infrared emissiveity of the surface of Venus, thereby complementing Magellan radar reflectivity and ground based radio emissivity measurements. The contrast ratio between highlands and plains is much smaller than would be expected for blackbody radiation from the surface along. Unlike at radio wavelengths, where the atmosphere is essentially transparent, at near-infrared wavelengths the atmosphere emits, absorbs, and scatters radiation, and can modify the observed topographically induced contrasts. The additional radiation from the atmosphere reduces the contrast, and further modification would be expected if terrain at different altitudes has different emissivities. A fit to our data therefore requires, and may constrain, a model of the lowest scale height of the atmosphere.

Meadows, V. S.↗

NASA NTRS1986

Commercial applications and scientific research requirements for thermal-infrared observations of terrestrial surfaces

In the spring of 1986 the EOSAT Company and NASA Headquarters organized a workshop to consider: (1) the potential value of space-acquired multiband thermal remote sensing in terrestrial research and commercial applications, and (2) the scientific and technological requirements for conducting such observations from the LANDSAT platform. The workshop defined the instrument characteristics of three types of sensors that would be needed to expand the use of thermal information for Earth observation and new commercial opportunities. The panels from two disciplines, geology and evapotranspiration/botany, along with the instrument panel, presented their recommendations to the workshop. The findings of these meetings are presented.

Goward, Samuel N.↗

NASA NTRS2000

Sensitivity of Spacebased Microwave Radiometer Observations to Ocean Surface Evaporation

Ocean surface evaporation and the latent heat it carries are the major components of the hydrologic and thermal forcing on the global oceans. However, there is practically no direct in situ measurements. Evaporation estimated from bulk parameterization methods depends on the quality and distribution of volunteer-ship reports which are far less than satisfactory. The only way to monitor evaporation with sufficient temporal and spatial resolutions to study global environment changes is by spaceborne sensors. The estimation of seasonal-to-interannual variation of ocean evaporation, using spacebased measurements of wind speed, sea surface temperature (SST), and integrated water vapor, through bulk parameterization method,s was achieved with reasonable success over most of the global ocean, in the past decade. Because all the three geophysical parameters can be retrieved from the radiance at the frequencies measured by the Scanning Multichannel Microwave Radiometer (SMMR) on Nimbus-7, the feasibility of retrieving evaporation directly from the measured radiance was suggested and demonstrated using coincident brightness temperatures observed by SMMR and latent heat flux computed from ship data, in the monthly time scale. However, the operational microwave radiometers that followed SMMR, the Special Sensor Microwave/Imager (SSM/I), lack the low frequency channels which are sensitive to SST. This low frequency channels are again included in the microwave imager (TMI) of the recently launched Tropical Rain Measuring Mission (TRMM). The radiance at the frequencies observed by both TMI and SSM/I were simulated through an atmospheric radiative transfer model using ocean surface parameters and atmospheric temperature and humidity profiles produced by the reanalysis of the European Center for Medium Range Weather Forecast (ECMWF). From the same ECMWF data set, coincident evaporation is computed using a surface layer turbulent transfer model. The sensitivity of the radiance to evaporation over various seasons and geographic locations are examined. The microwave frequencies with radiance that are significant correlated with evaporation are identify and capability of estimating evaporation directly from TMI will be discussed.

Liu, Timothy W.↗

NASA NTRS1973

Theory for magnetotelluric observations on the surface of a layered anisotropic half space

The conductivities for the magnetotelluric model described are taken to be constant vertically in each of a large number of horizontal layers. The conductivities and the associated magnetic, electric, and current vector fields are considered to be laterally homogeneous within a vertical cylinder centered about the observation site. The electromagnetic fields are, therefore, only functions of the vertical coordinate. A relatively simple algorithm is presented for calculation of the magnetotelluric complex impedance tensor.

Loewenthal, D.↗

NASA NTRS2016

Observed Trend in Surface Wind Speed Over the Conterminous USA and CMIP5 Simulations

There has been no spatial surface wind map even over the conterminous USA due to the difficulty of spatial interpolation of wind field. As a result, the reanalysis data were often used to analyze the statistics of spatial pattern in surface wind speed. Unfortunately, no consistent trend in wind field was found among the available reanalysis data, and that obstructed the further analysis or projection of spatial pattern of wind speed. In this study, we developed the methodology to interpolate the observed wind speed data at weather stations using random forest algorithm. We produced the 1-km daily climate variables over the conterminous USA from 1979 to 2015. The validation using Ameriflux daily data showed that R2 is 0.59. Existing studies have found the negative trend over the Eastern US, and our study also showed same results. However, our new datasets also revealed the significant increasing trend over the southwest US especially from April to June. The trend in the southwestern US represented change or seasonal shift in North American Monsoon. Global analysis of CMIP5 data projected the decrease trend in mid-latitude, while increase trend in tropical region over the land. Most likely because of the low resolution in GCM, CMIP5 data failed to simulate the increase trend in the southwest US, even though it was qualitatively predicted that pole ward shift of anticyclone help the North American Monsoon.

simulations↗

NASA NTRS1998

Comparison of Surface Ground Temperature from Satellite Observations and the Off-Line Land Surface GEOS Assimilation System

The surface ground temperature (Tg) is an important meteorological variable, because it represents an integrated thermal state of the land surface determined by a complex surface energy budget. Furthermore, Tg affects both the surface sensible and latent heat fluxes. Through these fluxes. the surface budget is coupled with the atmosphere above. Accurate Tg data are useful for estimating the surface radiation budget and fluxes, as well as soil moisture. Tg is not included in conventional synoptical weather station reports. Currently, satellites provide Tg estimates globally. It is necessary to carefully consider appropriate methods of using these satellite data in a data assimilation system. Recently, an Off-line Land surface GEOS Assimilation (OLGA) system was implemented at the Data Assimilation Office at NASA-GSFC. One of the goals of OLGA is to assimilate satellite-derived Tg data. Prior to the Tg assimilation, a thorough investigation of satellite- and model-derived Tg, including error estimates, is required. In this study we examine the Tg from the n Project (ISCCP DI) data and the OLGA simulations. The ISCCP data used here are 3-hourly DI data (2.5x2.5 degree resolution) for 1992 summer months (June, July, and August) and winter months (January and February). The model Tg for the same periods were generated by OLGA. The forcing data for this OLGA 1992 simulation were generated from the GEOS-1 Data Assimilation System (DAS) at Data Assimilation Office NASA-GSFC. We examine the discrepancies between ISCCP and OLGA Tg with a focus on its spatial and temporal characteristics, particularly on the diurnal cycle. The error statistics in both data sets, including bias, will be estimated. The impact of surface properties, including vegetation cover and type, topography, etc, on the discrepancies will be addressed.

Yang, R.↗

NASA NTRS2016

Surface Stress in Tropical Cyclone Observed by Scatterometer

Ocean surface wind (U) is air in motion and stress (τ) is the turbulent transport of momentum between the ocean and the atmosphere. While the strong wind of a tropical cyclone (TC) causes destruction at landfall, it is the surface stress that drags down the TC. There was almost no stress measurement except in dedicated field campaigns and the stress we used was almost entirely derived from wind through a drag coefficient (C(sub D)), as defined by C(sub D) = τ / ( ρ U(exp 2)). In TC, there is difficulty in measuring strong wind and large uncertainty in the drag coefficient.

Liu, W. Timothy↗

NASA NTRS1990

Comparisons between TOMS, TOVS and DOBSON observations - Satellite and surface views of total column ozone

The reliability of the ozone retrievals by the TIROS-N Operational Vertical Sounder (TOVS) calculated with the newly developed physical algorithm is investigated by comparing the quality of the TOVS total ozone soundings to the corresponding values obtained by the Nimbus-7 TOMS and by the ground-based DOBSON network. The three-way comparison concentrates on observations during the last 4 months of 1987, the period of the great Antarctic 'ozone hole'. It is shown that each instrument has characteristic strengths and weaknesses, and that each of the three systems makes serious errors under some conditions.

Chesters, Dennis↗

DOE OSTI2023

Observations of Ocean Surface Wave Attenuation in Sea Ice Using Seafloor Cables

Abstract The attenuation of ocean surface waves during seasonal ice cover is an important control on the evolution of Arctic coastlines. The spatial and temporal variations in this process have been challenging to resolve with conventional sampling using sparse arrays of moorings or buoys. We demonstrate a novel method for persistent observation of wave‐ice interactions using distributed acoustic sensing (DAS) along existing seafloor fiber optic telecommunications cables. DAS measurements span a 36‐km cross‐shore cable on the Beaufort Shelf from Oliktok Point, Alaska. DAS optical sensing of fiber strain‐rate provides a proxy for seafloor pressure, which we calibrate with wave buoy measurements during the ice‐free season (August 2022). We apply this calibration during the ice formation season (November 2021) to obtain unprecedented resolution of variable wave attenuation rates in new, partial ice cover. The location and strength of wave attenuation serve as proxies for ice coverage and thickness, especially during rapidly evolving events.

Smith, Madison M.↗

NASA NTRS1981

Seasat SAR cross-section modulation by surface winds - GOASEX observations

Seasat radar observations of the Gulf of Alaska by the Synthetic Aperture Radar (SAR) and the Wind Speed Scatterometer (SASS) indicate that L-band backscatter is modulated by wind speed and possibly by wind direction. It is noted that the L-band backscatter is approximately proportional to the square root of surface winds and that upwind/crosswind differences in backscatter can be as large as 10% in the range of these wind speeds. It is suggested that Seasat SAR images, in conjunction with Seasat Scatterometer data may provide fine-scale mapping of ocean winds and directions. The need for further Seasat SAR-SASS comparisons in order to extend the range of wind speeds is stressed.

Thompson, T. W.↗

NASA NTRS2010

Assimilation of Satellite-Derived Skin Temperature Observations into Land Surface Models

Land surface (or "skin") temperature (LST) lies at the heart of the surface energy balance and is a key variable in weather and climate models. Here we assimilate LST retrievals from the International Satellite Cloud Climatology Project (ISCCP) into the Noah and Catchment (CLSM) land surface models using an ensemble-based, off-line land data assimilation system. LST is described very differently in the two models. A priori scaling and dynamic bias estimation approaches are applied because satellite and model LST typically exhibit different mean values and variability. Performance is measured against 27 months of in situ measurements from the Coordinated Energy and Water Cycle Observations Project at 48 stations. LST estimates from Noah and CLSM without data assimilation ("open loop") are comparable to each other and superior to that of ISCCP retrievals. For LST, RMSE values are 4.9 K (CLSM), 5.6 K (Noah), and 7.6 K (ISCCP), and anomaly correlation coefficients (R) are 0.62 (CLSM), 0.61 (Noah), and 0.52 (ISCCP). Assimilation of ISCCP retrievals provides modest yet statistically significant improvements (over open loop) of up to 0.7 K in RMSE and 0.05 in anomaly R. The skill of surface turbulent flux estimates from the assimilation integrations is essentially identical to the corresponding open loop skill. Noah assimilation estimates of ground heat flux, however, can be significantly worse than open loop estimates. Provided the assimilation system is properly adapted to each land model, the benefits from the assimilation of LST retrievals are comparable for both models.

Reichle, Rolf H.↗

NASA NTRS1979

Thermal tides and Martian dust storms - Direct evidence for coupling

Evidence for the coupling of diurnal and semidiurnal thermal tides, observed as surface pressure oscillations at the Viking Lander 1 and 2 landing sites, to Martian global dust storms is presented and the implications for models of dust storm generation are discussed. Local atmospheric opacity increases and jumps in atmospheric pressure ranges were found to be essentially simultaneous, and diurnal and semidiurnal components of the pressure and wind oscillations were observed to increase markedly after the onset of a dust storm. The semidiurnal wind component can be related to the observed surface pressure variations by means of a model of a semidiurnally forced Ekman boundary layer. However, a classical atmospheric tidal model shows that the preferential enhancement of the semidiurnal surface pressure oscillation observed at the Lander 1 site can be produced by a tidal heating distribution in which most of the heating is done at an altitude above 10 km. Observations suggest that various mechanisms are important for the generation and decay of global Martian dust storms.

Leovy, C. B.↗

NASA NTRS1988

Sampling strategies on Mars: Remote and not-so-remote observations from a surface rover

The mobility and speed of a semi-autonomous Mars rover are of necessity limited by the need to think and stay out of trouble. This consideration makes it essential that the rover's travels be carefully directed to likely targets of interest for sampling and in situ study. Short range remote sensing conducted from the rover, based on existing technology, can provide significant information about the chemistry and mineralogy of surrounding rocks and soils in support of sampling efforts. These observations are of course of direct scientific importance as well. Because of the small number of samples actually to be returned to Earth, it is also important that candidate samples be analyzed aboard the rover so that diversity can be maximized. It is essential to perform certain types of analyses, such as those involving volatiles, prior to the thermal and physical shocks of the return trip to Earth. In addition, whatever measurements can be made of nonreturned samples will be important to enlarge the context of the detailed analyses to be performed later on the few returned samples. Some considerations related to these objectives are discussed.

Singer, R. B.↗

DOE OSTI2016

Tropical Pacific SST Drivers of Recent Antarctic Sea Ice Trends

A strengthening of the Amundsen Sea low from 1979 to 2013 has been shown to largely explain the observed increase in Antarctic sea ice concentration in the eastern Ross Sea and decrease in the Bellingshausen Sea. Here it is shown that while these changes are not generally seen in freely running coupled climate model simulations, they are reproduced in simulations of two independent coupled climate models: one constrained by observed sea surface temperature anomalies in the tropical Pacific and the other by observed surface wind stress in the tropics. This analysis confirms previous results and strengthens the conclusion that the phase change in the interdecadal Pacific oscillation from positive to negative over 1979–2013 contributed to the observed strengthening of the Amundsen Sea low and the associated pattern of Antarctic sea ice change during this period. New support for this conclusion is provided by simulated trends in spatial patterns of sea ice concentrations that are similar to those observed. These results highlight the importance of accounting for teleconnections from low to high latitudes in both model simulations and observations of Antarctic sea ice variability and change.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1975

Lunar surface solar wind observations at the Apollo 12 and Apollo 15 sites

The solar wind-lunar magnetic field interaction is examined by comparing Apollo 12 and Apollo 15 solar wind spectrometric data. The instrumentation and data analysis methods are described along with the observations at the Apollo 15 site, and the data from the two sites are compared. The results show no noticeable differences between the properties of the upstream solar wind and the plasma observed at the Apollo 15 site (where the local magnetic field is relatively weak) and strong perturbations in the solar wind at the Apollo 12 site (where the field is relatively strong), which include deceleration, deflection, and heating of solar wind protons, focusing or defocusing of the ion flux, and an increased level of plasma parameter fluctuations. These effects are shown to require a charge-separated electric field above the lunar surface and a scale size of about 5 km for the local magnetic field at the Apollo 12 site and to suggest that local lunar magnetic field regions cause lunar limb compression waves which should be more noticeable for low solar wind dynamic pressures.

Clay, D. R.↗

NASA NTRS1982

Quasi-liquid states observed on ion beam microtextured surfaces

Liquid-like properties have been observed on surface structures developed by means of ion beam microtexturing. The structures include cones, pyramids, or wavelike formations. The observed liquid-like effects are drips and ripples on the sides of cones, droplet formation, the apparent flow and coalescence of closely packed structures, wetting angle and other surface tension effects, and the bending of cones by additional heating. The bulk temperatures are in the range of 50-600 C. These effects are seen to some extent on Cu, Al, Au, Pb, and Ni substrates.

Rossnagel, S. M.↗

DOE OSTI2019

Effects of Fine Particle Shot Peening Treatment on Fatigue Properties of Al-7Si-0.3Mg Alloy

In this study, two different fine particle shot peening (FPSP) treatments were performed on Al-7Si-0.3Mg alloy specimens to evaluate their effects on fatigue properties. After the treatment, the microstructure morphology of the specimens was observed, and the surface roughness and residual stress distribution were measured. Rotating bending fatigue tests were conducted, and the fatigue fracture surfaces were observed using scanning electron microscopy (SEM). The crack initiation and propagation behavior were investigated using the replica method. The results indicate that FPSP can introduce residual stress on the surface layer of the material and refine the surface microstructure, and also change the surface roughness. At low stress amplitude levels, FPSP can improve fatigue life significantly. At 5 × 10{sup 7} cycles, the fatigue strength of shot-peened specimens increased by 33% compared to unpeened specimens. In unpeened and steel shot-peened (SSP) specimens, both crystal slip and casting defects can induce fatigue failure, while only casting defects can cause failure in the case of ceramic shot-peened (CSP) specimens. Moreover, FPSP can move the crack initiation site to the subsurface from the surface. The range of threshold stress intensity factor of the material can be improved significantly by this treatment. Casting defects have a significant influence on fatigue strength; the effect on fatigue strength can be well evaluated by the modified Murakami equation.

36 MATERIALS SCIENCE↗