Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sulfide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Non Urban Troposphere Composition Symposium, Hollywood, Fla., November 10-12, 1976, Proceedings

Papers are presented which originate from a conference on 'The Non-Urban Troposphere Composition', held in 1976. Attention is given to distributions of nitrous oxide in the atmosphere, and to tropospheric and stratospheric compositions which are perturbed by NO(x) emissions from high-altitude aircraft. Ozone is studied in terms of in situ measurements; various meteorological analyses of tropopause folding, ozone measurements in the Boston area, and ozone measurements in rural areas are presented. A one-dimensional model used to study tropospheric photochemistry numerically is presented as are vertical profiles of tropospheric and stratospheric molecular hydrogen. The oxidation of ammonia, methane, and hydrogen sulfide is assessed in nonurban tropospheres along with nonurban measurements of ethane and methane for various atmospheric conditions. With reference to the particle size distribution of chloride in the marine aerosol, organic and inorganic chlorine concentrations are evaluated, and measurements of sea-air CO2 flux by eddy correlation are investigated.

Source record↗
NASA NTRS1977

Effect of heating rate on toxicity of pyrolysis gases from some synthetic polymers

The effect of heating rate on the toxicity of the pyrolysis gases from some synthetic polymers was investigate, using a screening test method. The synthetic polymers were polyethylene, polystyrene, polymethyl methacrylate, polycarbonate, ABS, polyaryl sulfone, polyether sulfone, and polyphenylene sulfide. The toxicants from the sulfur-containing polymers appeared to act more rapidly than the toxicants from the other polymers. It is not known whether this effect is due primarily to differences in concentration or in the nature of the toxicants. The carbon monoxide concentrations found do not account for the observed results.

Hilado, C. J.↗
NASA NTRS1978

Ultraviolet-photoproduced organic solids synthesized under simulated Jovian conditions - Molecular analysis

In an earlier paper, Khare and Sagan reported the production of a brownish polymeric material from the near-ultraviolet irradiation of simulated jovian atmospheres with a low hydrogen abundance. Examination of this product indicates that hydrogen sulfide is the initial photon acceptor; the powder resulting after extraction with benzene is 84 percent sulfur, largely S8. In results reported here, the remaining 16 percent was pyrolyzed and then examined by gas chromatography-mass spectrometry. Pyrolysis at 450 C yielded a series of alkanes, alkenes, C3-alkylbenzenes, aromatics, thiophenes, alkylthiophenes, alkylmercaptans, alkyldisulfides, together with the nitrogenous compounds hydrogen cyanide, methyl cyanide, alkylisothiocyanates, acrylonitrile, and allylisothiocyanates. Some of these compounds might be sought on Jupiter and Saturn and their satellites by remote infrared and ultraviolet spectroscopy and directly by entry probes.

Khare, B. N.↗
NASA NTRS1978

Chemical weathering on Mars - Thermodynamic stabilities of primary minerals /and their alteration products/ from mafic igneous rocks

Chemical weathering on Mars is examined theoretically from the standpoint of thermodynamic equilibrium between primary rock-forming minerals and the atmospheric gases O2, H2O, and CO2. The primary minerals considered are those common to mafic igneous rocks and include olivine, pyroxene, plagioclase, magnetite, troilite, pyrrhotite, and apatite. The importance of kinetics and reaction mechanisms in controlling possible weathering processes on Mars is discussed within the limits of currently available data, and the possible influence of liquid water on Martian weathering processes is evaluated where appropriate. For gas-solid weathering of mafic igneous rocks at the Martian surface, it is concluded that upon attainment of thermodynamic equilibrium: (1) oxides and carbonates should dominate the mineral assemblage of weathering products; (2) hematite rather than goethite should be the stable mineral form of Fe (III); (3) FeSO4 or FeSO4.H2O could be the stable weathering product of iron sulfides in the absence of liquid water; and (4) kaolinite is apparently the only clay mineral that should be thermodynamically stable over all ranges of temperature and water-vapor abundance at the Martian surface.

Gooding, J. L.↗
NASA NTRS1978

Tysnes Island - An unusual clast composed of solidified, immiscible, Fe-FeS and silicate melts

An inclusion found in the Tysnes Island gas-rich H4 chondrite is described. The clast consists of two distinct portions, separated by a smooth boundary; the portions are a tear-drop shaped Fe-FeS eutecticlike intergrowth (0.5 cm greatest dimension) and a silicate consisting primarily of olivine in glass. Nickel enrichment is found in the metal at the metal-sulfide boundaries and in nodules within the metal. It is thought that the portions separated from one another as immiscible liquids and that the modal composition of each portion agrees with the compositions predicted for a total melt of an H-group chondrite. The inclusion is discussed in terms of the process of metal-silicate fractionation suggested by Fodor and Keil (1976).

Wilkening, L. L.↗
NASA NTRS1977

Sulfur in lunar mare basalts as a function of bulk composition

Sulfur abundances and metallic iron abundances in 18 Apollo 12 mare basalts were determined. No correlation between sulfur abundance and metallic iron content was detected; metallic iron abundances are not primarily caused by S loss. Sulfur abundances, directly related to the bulk composition of the rocks and especially to the TiO2 content, increase with increasing degrees of fractionation and appear to result from S concentration in the melts during fractionation. Unlike the Apollo 17 melts, the Apollo 12 melts were unsaturated with respect to sulfide. Composition appears to control S content for Apollo 17 basalts, and cumulus processes may cause Fe-FeS enrichment.

Gibson, E. K., Jr.↗
NASA NTRS1978

Critical currents in sputtered PbMo6S8

Critical currents in sputtered Chevrel-phase lead molybdenum sulfide have been measured at several temperatures as a function of applied magnetic field up to 19 T. A critical current density of approximately 50 million A/sq m was obtained at 15 T and 1.8 K, and the effective upper critical field was estimated to be 30 T. The pinning force at low fields was found to be dependent on the amount of free lead.

Alterovitz, S. A.↗
NASA NTRS1978

The relative fire resistance of select thermoplastic materials

The relative thermal stability, flammability, and related thermochemical properties of some thermoplastic materials currently used in aircraft interiors as well as of some candidate thermoplastics were investigated. Currently used materials that were evaluated include acrylonitrile butadiene styrene, bisphenol A polycarbonate, polyphenylene oxide, and polyvinyl fluoride. Candidate thermoplastic materials evaluated include: 9,9-bis(4-hydroxyphenyl)fluorene polycarbonate-poly(dimethylsiloxane) block polymer, chlorinated polyvinylchloride homopolymer, phenolphthalein polycarbonate, polyethersulfone, polyphenylene sulfide, polyarylsulfone, and polyvinylidene fluoride.

Kourtides, D. A.↗
NASA NTRS1978

Assessment of relative flammability and thermochemical properties of some thermoplastic materials

The thermochemical and flammability characteristics of some typical thermoplastic materials currently in use and others being considered for use in aircraft interiors are described. The properties studied included (1) thermal mechanical properties such as glass transition and melt temperature, (2) changes in polymer enthalpy by differential scanning calorimetry, (3) thermogravimetric analysis in an anaerobic and oxidative environment, (4) oxygen index, (5) smoke evolution, (6) relative toxicity of the volatile products of pyrolysis, and (7) selected physical properties. The generic polymers which were evaluated included: acrylonitrile-butadiene-styrene, bisphenol A polycarbonate, bisphenol fluorenone carbonatedimethylsiloxane block polymer, phenolphthalein-bisphenol A polycarbonate, phenolphthalein polycarbonate, polyether sulfone, polyphenylene oxide, polyphenylene sulfide, polyaryl sulfone, chlorinated polyvinyl chloride homopolymer, polyvinyl fluoride, and polyvinylidene fluoride. Processing parameters including molding characteristics of some of the advanced polymers are described. Test results and relative rankings of some of the flammability, smoke and toxicity properties are presented.

Kourtides, D. A.↗
NASA NTRS1979

Friction and transfer of copper, silver, and gold to iron in the presence of various adsorbed surface films

Sliding friction experiments were conducted with the noble metals copper, silver, and gold and two binary alloys of these metals contacting iron in the presence of various adsorbates including, oxygen, methyl mercaptan, and methyl chloride. A pin on disk specimen configuration was used with a load of 100 grams, sliding velocity of 60 mm/min; at 25 C with the surfaces saturated with the adsorbates. Auger emission spectroscopy was used to monitor surface films. Results of the experiments indicate that friction and transfer characteristics are highly specific with respect to both the noble metal and surface film present. With all three metals and films transfer of the noble metal to iron occurred very rapidly. With all metals and films transfer of the noble metal to iron continuously increased with repeated passes except for silver and copper sliding on iron sulfide.

Buckley, D. H.↗
NASA NTRS1979

Industrialization study, phase 2

The potentials and requirements of advanced photovoltaic technologies still in their early developmental stages were evaluated and compared to the present day single crystal silicon wafer technology and to each other. The major areas of consideration include polycrystalline and amorphous silicon, single crystal and polycrystalline gallium arsenide, and single crystal and polycrystalline cadmium sulfide. A rank ordering of the advanced technologies is provided. The various ranking schemes were based upon present-day efficiency levels, their stability and long-term reliability prospects, material availability, capital investments both at the laboratory and production level, and associated variable costs. An estimate of the timing of the possible readiness of these advanced technologies for technology development programs and industrialization is presented along with a set of recommended government actions concerning the various advanced technologies.

Source record↗
NASA NTRS1979

Application of a coupled aerosol formation: Radiative transfer model to climatic studies of aerosols

A sophisticated one dimensional physical-chemical model of the formation and evolution of stratospheric aerosols was used to predict the size and number concentration of the stratospheric aerosols as functions of time and altitude following: a large volcanic eruption; increased addition of carbonyl sulfide (OCS) or sulfur dioxide (SO2) to the troposphere; increased supersonic aircraft (SST) flights in the stratosphere; and, large numbers of space shuttle (SS) flights through the stratosphere. A radiative-convective one dimensional climate sensitivity study, using the results of the aerosol formation model, was performed to assess the ground level climatic significance of these perturbations to the stratospheric aerosol layer. Volcanic eruptions and large OCS or SO2 increases could cause significant climatic changes. Currently projected SS launches and moderate fleets of SST's are unlikely to upset the stratospheric aerosol layer enough to significantly impact climate.

Toon, O. B.↗
NASA NTRS1977

Ceramic/metal seals

Design criteria are discussed for a hermetic seal capable of withstanding the 450 C operating temperature of a lithium-metal sulfide battery system. A mechanical seal consisting of two high strength alloy metal sleeves welded or brazed to a conductor assembly and pressed onto a ceramic is described. The conductor center passes through the ceramic but is not sealed to it. The seal is effected on the outside of the taper where the tubular part is pressed down over and makes contact.

Bredbenner, A. M.↗
NASA NTRS1979

A procedure for determining the optical characteristics of a device for measuring illumination in the atmosphere of Venus

A procedure is described for obtaining the calibration, angular and spectral characteristics of a broad band photometer used on Venera 9 and 10 spacecraft to measure the illuminance regime in five spectral intervals with respect to three directions. The photometer has three identical groups of photoreceivers on which light falls through fiber light guides. Each group contains three cadmium sulfide photoresistors with light filters, a cadmium selenide photoresistor and a silicon photodiode. The temperature of the photoreceivers is measured by thermistors installed in series with the receivers.

Golovin, Y. M.↗
NASA NTRS1978

The hot corrosion of Co-25Cr-10Ni-5Ta-3Al-0.5Y alloy /S-57/

A cobalt-base alloy, Co-25Cr-10Ni-5Ta-3Al-0.5Y (S-57), was subjected to hot corrosion in Mach 0.3 burner-rig combustion gases at maximum alloy temperatures of 900 and 1000 C. Various salt concentrations were injected into the burner: 0.5, 2,5, and 10 parts per million synthetic sea salt and 4 parts per million sodium sulfate (Na2SO4). The extent of corrosion was determined by measuring the maximum depth of corrosion in the alloy, and the corrosion process was studied by metallography, X-ray diffraction, scanning electron microscopy, and electron microprobe analysis. While S-57 was found to possess only moderate oxidation resistance at these temperatures, this alloy resisted significant hot corrosion attack under all but the most severe test conditions. The process of hot corrosion attack under the most severe conditions of this study was primarily sulfidation.

Santoro, G. J.↗
NASA NTRS1978

Carbonaceous chondritic material in the solar system

Carbonaceous chondritic matrix material (CCMM) appears to be an important planet-forming unit in the mid-solar system, from the orbits of Mars to that of Uranus. The type specimen for CCMM is the low-temperature (400-500 K) assemblage of clay minerals, organic polymer, magnetite, and Ni-rich iron sulfides which constitutes the black, fine-grained matrix of primitive carbonaceous chondrites. Solar-system objects which appear to be partly or wholly made of CCMM are the satellites of Mars, most asteroids, interplanetary dust, and, perhaps, comets, satellites of the outer planets and the rings of Uranus. CCMM constituents probably formed by low-temperature reactions of higher-temperature condensates with the ambient solar composition gas, or in the case of the organic polymer, by reactions of gaseous species catalyzed by solids.

Wilkening, L. L.↗
NASA NTRS1978

Two-week studies of survivors from exposures to pyrolysis gases

Swiss Webster male mice which had survived near-lethal concentrations of pyrolysis gases from a variety of polymeric materials were killed two weeks after exposure, and the lungs, heart, liver, kidney, and spleen were examined. Microscopic examination revealed no significant effects on the liver, kidney, and spleen, while the effect on lungs could not be determined because of the high level of pathology in both experimental and control animals. The polymeric materials which were pyrolyzed were polyethylene, ABS, polycarbonate, polyaryl sulfone, polyether sulfone, polyphenylene sulfide, modified polyphenylene oxide, chlorinated polyvinyl chloride, polyvinylidene fluoride, and fluorene polycarbonate. It is suggested that tissue specimens should be examined 24 or 48 hr after exposure rather than 2 wks after exposure, since the 2 wk period permits healing to occur.

Bucci, T. J.↗
NASA NTRS1978

Thermal metamorphism of primitive meteorites. VII - Mineralogy-petrology of heated Murchison /C2/ and alteration of C30 and other chondrites

Alterations caused by week-long heating of Murchison in a low-pressure environment at 400-1400 C are of two types: thermodynamically favored kinetically controlled or thermodynamically controlled rapid processes. Kinetically controlled changes pertinent to chondritic evolution and which vary progressively with temperature in heated Murchison include: chondrule blurring; matrix coarsening; increasing mean Fa and Fs contents of ferromagnesian silicates; equilibration of olivine; increasing Mg/Si, Ca/Si, Al/Si, and Cr/Si and decreasing Fe/Si, Ni/Si, and S/Si in matrix; Cr loss from kamacite; and homogenization and Ni-zoning in taenite at high temperatures. Low-temperature thermodynamically controlled changes include: transformation of high-Ni troilite to low-Ni and formation of Ni- and Co-rich metal from pentlandite. High-temperature changes include formation of Cr-rich magnetite and formation of a Ni-rich sulfide similar to that found in highly altered chondrites. Trends resulting from processes of both kinds in Murchison are consistent with characteristics of a postulated C30 metamorphic suite, while those changes caused by reactions of the second kind are similar to those in heavily shock-heated ordinary chondrites and the heavily metamorphosed C5-6 chondrite, Mulga West. Either the simulations support the metamorphic origin of the C30 suite and other thermally induced changes or the natural alterations support the utility of laboratory simulations in studying meteoritic evolution.

Matza, S. D.↗