Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structure formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Methods of downloading to user institutions

The Pilot Climate Data System (PCDS) not only supports the ability to output data in a uniform structure via the Common Data Format (CDF, but also supports the ability to provide data in native format for any data set supported by the PCDS. Methods are discussed for acquiring data in either format from the PCDS for further work at remote sites. Four levels of remote utilization are defined, based on the extent of offloading the National Space Science Data Center (NSSDC) computer and local PCDS processing. Characteristics of each level are thoroughly explained, including details of information and data transfers, downloading, uploading, and offloading of the NSSDC computer. Only the levels themselves are specified here. The first level defined is that of a network-based distributed PCDS. A subset of the PCDS software is ported to another VAX and made available on a network (i.e., SPAN) node. There is no subset of the PCDS at the second level, but it is also network based. Non-network utilization of the PCDS, requiring dial-up log on, is denoted as a third level. Finally, at the fourth level, personal computer utilization of the PCDS through dial-up log on with proper terminal emulation is defined.

Treinish, L.↗

Implications of Viking color data for evolution of the Amenthes Region, Mars

In the Eastern Hemisphere of Mars, where the hemispheric dichotomy is not overlain by relatively recent flows from the Tharsis volcanoes, the Mars cratered terrain boundary (CTB) now exists as highly fractured terrain juxtaposed with the smooth plains of the Northern Hemisphere. Based on Mariner 9 photography, the southern cratered terrain in the Amenthes region (0 to 30 deg N, 225 to 270 deg W) is approximately 3 to 4 km above the northern plains, and the transition zone is marked by both broad plateaus and knobby terrain. In the Amenthes Southest quadrangle, in particular, the continuum between large detached plateaus, smaller smooth topped plateaus and knobby hills can be seen. To define the previous position and evolution of the boundary, the distribution of cratered terrain, characteristic landforms (knobby terrain and detached plateaus) have been mapped, as well as structural features across the boundary. Structural mapping indicates that geological formations parallel the boundary in the Eastern Hemisphere with the conclusion that CTB evolution involved normal faulting through extension perpendicular to the boundary.

Maxwell, Ted A.↗

Nonlinear evolution of the Kelvin-Helmholtz instability in the high-latitude ionosphere

The first numerical simulations of the nonlinear evolution of the electrostatic Kelvin-Helmholtz (K-H) instability with ionospheric Perderson conductivity coupling are presented. It is found that the K-H instability develops in a distinctly different manner in the nonlinear regime with Pedersen coupling than without it. Pedersen coupling effects, in conjunction with a neutral wind and density gradient, are shown to result in an increased time scale for K-H instability wave growth, to inhibit K-H vortex formation, to lead to nonlinear structures which can be described as 'breaking waves', and to generate, in the nonlinear regime, small-scale turbulence by means of secondary instabilities growing on primary waves. The spatial power spectra of the electrostatic potential and density fluctuations are computed, and differences with and without Pedersen effects are reported.

Keskinen, M. J.↗

Experimental studies in vortex pair motion coincident with a liquid reaction

An experimental examination of the coincidence of a liquid reaction (acid/base) with the formation of a vortex pair structure is described in which emphasis is placed on the evolution of the strained diffusion layer and reacted core structures. Flow visualization of the reaction process is achieved via the technique of chemically sensitive LIF. The observed growth of reacted core structures associated with each vortex is compared with theoretically predicted behavior (Marble, 1983; Karagozian and Marble, 1986). Vortex pair separation is also compared with theoretical correlations, and the relevance of the analogy between a fast liquid reaction and a gaseous reaction is discussed.

Karagozian, A. R.↗

Recovering the full velocity and density fields from large-scale redshift-distance samples

A new method for extracting the large-scale three-dimensional velocity and mass density fields from measurements of the radial peculiar velocities is presented. Galaxies are assumed to trace the velocity field rather than the mass. The key assumption made is that the Lagrangian velocity field has negligible vorticity, as might be expected from perturbations that grew by gravitational instability. By applying the method to cosmological N-body simulations, it is demonstrated that it accurately reconstructs the velocity field. This technique promises a direct determination of the mass density field and the initial conditions for the formation of large-scale structure from galaxy peculiar velocity surveys.

Bertschinger, Edmund↗

Stability of three-dimensional boundary layers

The present evaluation of three-dimensional flows notes that the presence of such disturbance sources as roughness could favor the stationary mode, and that end-conditions may inhibit traveling disturbances in the experiments reported; alternatively, the theory could be inadequate. In general, uncertainties remain as to the definition of transition in three dimensions. It remains important to ascertain whether the formation of three-dimensional structures and characteristic stages will occur, as in two-dimensional flow transition. The possibilities and mechanisms for secondary instabilities also remain to be determined.

Reed, Helen L.↗

Electrodynamics of solar wind-magnetosphere-ionosphere interactions

The paper presents a coherent picture of fundamental physical processes in three basic elements of the solar-wind/magnetosphere/ionosphere coupling system: (1) the field-aligned potential structure which leads to the formation of auroral arcs, (2) the magnetosphere-ionosphere coupling which leads to the onset of magnetospheric substorms, and (3) the solar-wind/magnetosphere dynamo which supplies the power driving various magnetospheric processes. Process (1) is forced into existence by the loss-cone constriction effect when the upward field-aligned current density exceeds the loss-cone thermal flux limit. Substorm onset occurs when the ionosphere responds fully to the enhanced magnetospheric convection driven by the solar wind. Energy is transferred from the solar wind to the magnetosphere by a dynamo process, primarily on open field lines.

Kan, Joseph R.↗

Concepts for thin-film GaAs concentrator cells

The development of advanced GaAs concentrator solar cells, and in particular, the use of CLEFT (cleavage of lateral epitaxial films for transfer) processes for formation of thin-film structures is reported. The use of CLEFT has made possible processing of the back, and cells with back surface grids are discussed. Data on patterned junction development are presented; such junctions are expected to be useful in back surface applications requiring point contacts, grating structures, and interdigitated back contacts. CLEFT concentrator solar cells with grids on the front and back surfaces are reported here; these cells are 4 microns thick and are bonded to glass covers for support. Air mass zero efficiency of 18.8 percent has been obtained for a CLEFT concentrator operating at 18.5 suns.

Spitzer, M. B.↗

A computational study of the impingement region of an unsteady subsonic jet

Vertical/Short Take-Off and Landing (V/STOL) aircraft may encounter operating difficulties while hovering near the ground. Lift loss, hot gas and debris ingestion, and landing surface damage are some of the potential problems which can result from the interaction of the propulsive jets with the airframe and ground. The purpose of the present work is to develop a detailed understanding of a flowfield, a jet exiting from a flat plate impacting a ground plane, that contains much of the essential physics of the complex flows encountered by V/STOL aircraft in hover. To achieve this, a high-resolution time-accurate numerical simulation of the impinging jet flow was performed. The numerical simulation is based on the solution of the laminar compressible Navier-Stokes equations using the Beam-Warming algorithm. Complex start-up and periodic jet and jet-induced vortex structures were captured, including the formation of primary and secondary jet-induced vortices and wall-jet separation. The formation and development of these phenomena are supported by experimental measurements and smoke visualization. Results are compared with appropriate experiments.

Jalamani, Zakaria A.↗

Lightning and plasma wave observations from the Galileo flyby of Venus

Durig the Galileo flyby of Venus the plasma wave instrument was used to search for impulsive radio signals from lightning and to investigate locally generated plasma waves. A total of nine events were detected in the frequency range from 100 kilohertz to 5.6 megahertz. Although the signals are weak, lightning is the only known source of these signals. Near the bow shock two types of locally generated plasma waves were observed, low-frequency electromagnetic waves from about 5 to 50 hertz and electron plasma oscillation at about 45 kilohertz. The plasma oscillations have considerable fine structure, possibly because of the formation of soliton-like wave packets.

Gurnett, D. A.↗

Late time cosmological phase transitions 1: Particle physics models and cosmic evolution

We described a natural particle physics basis for late-time phase transitions in the universe. Such a transition can seed the formation of large-scale structure while leaving a minimal imprint upon the microwave background anisotropy. The key ingredient is an ultra-light pseudo-Nambu-Goldstone boson with an astronomically large (O(kpc-Mpc)) Compton wavelength. We analyze the cosmological signatures of and constraints upon a wide class of scenarios which do not involve domain walls. In addition to seeding structure, coherent ultra-light bosons may also provide unclustered dark matter in a spatially flat universe, omega sub phi approx. = 1.

Frieman, Joshua A.↗

Sudbury project (University of Muenster-Ontario Geological Survey): Petrology, chemistry, and origin of breccia formations

Within the Sudbury Project of the University of Muenster and the Ontario Geological Survey special emphasis was put on the breccia formations exposed at the Sudbury structure (SS) because of their crucial role for the impact hypothesis. They were mapped and sampled in selected areas of the north, east, and south ranges of the SS. The relative stratigraphic positions of these units are summarized. Selected samples were analyzed by optical microscopy, SEM, microprobe, XRF and INAA, Rb-Sr and SM-Nd-isotope geochemistry, and carbon isotope analysis. The results of petrographic and chemical analysis for those stratigraphic units that were considered the main structural elements of a large impact basin are summarized.

Stoeffler, D.↗

The implications of the COBE diffuse microwave radiation results for cosmic strings

We compare the anisotropies in the cosmic microwave background radiation measured by the COBE experiment to those predicted by cosmic string theories. We use an analytic model for the Delta T/T power spectrum that is based on our previous numerical simulations of strings, under the assumption that cosmic strings are the sole source of the measured anisotropy. This implies a value for the string mass per unit length of 1.5 +/- 0.5 x 10 exp -6 C-squared/G. This is within the range of values required for cosmic strings to successfully seed the formation of large-scale structures in the universe. These results clearly encourage further studies of Delta T/T and large-scale structure in the cosmic string model.

Bennett, David P.↗

A new method for the identification of non-Gaussian line profiles in elliptical galaxies

A new parameterization for the line profiles of elliptical galaxies, the Gauss-Hermite series, is proposed. This approach expands the line profile as a sum of orthogonal functions which minimizes the correlations between the errors in the parameters of the fit. This method also make use of the fact that Gaussians provide good low-order fits to observed line profiles. The method yields measurements of the line strength, mean radial velocity, and the velocity dispersion as well as two extra parameters, h3 and h4, that measure asymmetric and symmetric deviations of the line profiles from a Gaussian, respectively. The new method was used to derive profiles for three elliptical galaxies which all have asymmetric line profiles on the major axis with symmetric deviations from a Gaussian. Results confirm that elliptical galaxies have complex structures due to their complex formation history.

Van Der Marel, Roeland P.↗

The universe at moderate redshift

The Final Report on the universe at moderate redshift covering the period from 1 Mar. 1988 to 28 Feb. 1991 is presented. Areas of research included: galaxy formation and large-scale structure; intergalactic medium and background radiation fields; quasar statistics and evolution; and gravitational lenses.

Ostriker, Jeremiah P.↗

COINS: A composites information database system

An automated data abstraction form (ADAF) was developed to collect information on advanced fabrication processes and their related costs. The information will be collected for all components being fabricated as part of the Advanced Composite Technology (ACT) program and included in a COmposites INformation System (COINS) data base. The aim of the COINS development effort is to provide future airframe preliminary design and fabrication teams with a tool through which production cost can become a deterministic variable in the design optimization process. The effort was initiated by NASA Langley to implement the recommendations of a working group comprised of representatives from the commercial airframe companies. The principal working group recommendation was to reinstitute collection of composite part fabrication data in a format similar to the DOD/NASA Structural Composites Fabrication Guide. The fabrication information collection form was automated with current user friendly computer technology. The new automated form and features that make the form easy to use by an aircraft structural design manufacturing team are described.

Siddiqi, Shahid↗

Dawn-dusk asymmetries in the low-latitude boundary layer arising from the Kelvin-Helmholtz instability: A particle simulation

Along the low-latitude boundary layer (LLBL), the Kelvin-Helmholtz (K-H) instability can provide a means for injection of solar wind plasma across closed field lines of the magnetosphere. A fully electromagnetic, two-dimensional (three-velocity) particle code is used to investigate dawn-dusk asymmetries that can arise from velocity differences due to gradient drifts and electric field gradients, and ion acceleration across the narrow field transition layers in the dawn and dusk flanks. The model includes the dawn and dusk sides of the LLBL simultaneously in a slab geometry, incorporating seperate populations of ions and electrons for the magnetosphere and the magnetosheath plasmas. We report several effects: (1) asymmetries in the observed morphology of the turbulent structures, with familiar fluidlike vortex formation on the duskside, but tongues of magnetosheath plasma penetrating into the magnetosphere on the dawnside; (2) the formation of discrete current layers, characterized by strong currents and sharp gradients in the magnetic field, and discrete charge layers, having net charges and constant, weaker currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial boundary layer width; and (4) enhancement of the dawn-to-dusk electric field as magnetosheath particles and momenta are transported across the magnetopause.

Wilber, M.↗

The redshift-space neighborhoods of 36 loose groups. 2: Analysis

We explore the kinematics of 36 rich RGH89 groups identified from the first two complete slices of the CfA redshift survey. These groups have more than five members identified by a friends-of-friends algorithm at a number density contrast delta rho/rho greater than or equal to 80. To examine the stability of the determination of the velocity dispersion for these systems, we compare results for the original 232 members with results for a larger redshift sample, including 334 fainter members in the redshift neighborhoods. On average, we double the number of group members in each system. The observed distribution of velocity dispersions is stable. In fact, the velocity dispersion based on the original members identified in the CfA redshift survey is a reliable predictor of the value for the enlarged sample in an individual group. The velocity dispersion is thus a stable physical parameter for discrimination among systems galaxies. A larger sample of groups, particularly one selected from a distance limited catalog, should provide an interesting constraint on models for the formation of large-scale structure. We take H(sub 0) = km/s/Mpc.

Ramella, Massimo↗