Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Critical analysis of self-doping and water-soluble n-type organic semiconductors: structures and mechanisms

Self-doping organic semiconductors provide a promising route to avoid instabilities and morphological issues associated with molecular n-type dopants. Structural characterization of a naphthalenetetracarboxylic diimide (NDI) semiconductor covalently bound to an ammonium hydroxide group is presented. The dopant precursor was found to be the product of an unexpected base catalyzed hydrolysis, which was reversible. The reversible hydrolysis had profound consequences on the chemical composition, morphology, and electronic performance of the doped films. In addition, we investigated the degradation mechanism of the quaternary ammonium group and the subsequent doping of NDI. These findings reveal that the products of more than one chemical reaction during processing of films must be considered when utilizing this promising class of water-soluble semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reversible Cl/Cl - redox in a spinel Mn 3 O 4 electrode

A unique prospect of using halides as charge carriers is the possibility of the halides undergoing anodic redox behaviors when serving as charge carriers for the charge-neutrality compensation of electrodes. However, the anodic conversion of halides to neutral halogen species has often been irreversible at room temperature due to the emergence of diatomic halogen gaseous products. Here, we report that chloride ions can be reversibly converted to near-neutral atomic chlorine species in the Mn 3 O 4 electrode at room temperature in a highly concentrated chloride-based aqueous electrolyte. Notably, the Zn 2+ cations inserted in the first discharge and trapped in the Mn 3 O 4 structure create an environment to stabilize the converted chlorine atoms within the structure. Characterization results suggest that the Cl/Cl - redox is responsible for the observed large capacity, as the oxidation state of Mn barely changes upon charging. Computation results corroborate that the converted chlorine species exist as polychloride monoanions, e.g., [Cl 3 ] - and [Cl 5 ] - , inside the Zn 2+ -trapped Mn 3 O 4 , and the presence of polychloride species is confirmed experimentally. Our results point to the halogen plating inside electrode lattices as a new charge-storage mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molten Salt Synthesis of Increased (100)-Facet and Polycrystalline Nickel Oxide Nanoparticles for the Oxygen Evolution Reaction: Impact of Facet and Crystallinity on Electrocatalysis

Nickel oxide nanocubes with increased (100) surface facet presence (NiO(100)) were synthesized through a molten salt synthesis procedure to probe their oxygen evolution reaction (OER) activity in order to investigate the relationship between the surface facet and OER performance. While altering the synthesis parameters to decrease NiO(100) particle sizes and agglomeration, a polycrystalline NiO nanoparticle system formed from using Li2O as a Lux-Flood base (labelled Li2O-MSS NiO, where MSS stands for molten salt synthesis). This novel synthesis was further elaborated and the obtained materials were also tested for OER activity. After thorough structural characterization to determine crystallinity, lattice spacings, and elemental distribution, their OER activity was compared versus high surface area NiO(111) nanosheets in a three-electrode rotating disk electrode (RDE) system. The activity trend of (111) > Li2O-MSS > (100) was observed. This decrease in activity of the nanocube and polycrystalline samples was explained by differences between theoretical and experimental conditions, differences in ink rheology and resulting catalyst layer properties, and significant agglomeration seen in the imaging of the sample. Methods for improving the OER activity of these samples are discussed in the conclusion of this study.

08 HYDROGEN↗
DOE OSTI2025

Ion implantation of magnesium guests into type II silicon clathrate films: an alternate approach to doping a cage-like silicon allotrope

Type II silicon clathrates, with their unique cage-like structure, offer exciting potential for applications in thermoelectrics, photovoltaics, and quantum materials due to their tunable electronic and thermal properties. This study investigates the use of ion implantation to introduce targeted guest atoms, which act as dopants, into type II Si clathrate films. The focus is on Mg as a test case for implantation, a dopant previously unreported in type II Si clathrates. The effects of ion implantation on the metastable Si clathrate structure were examined through systematic investigation of implant parameters. Time-of-flight secondary ion mass spectrometry depth profiling confirmed the successful implantation of Mg, while X-ray diffraction and confocal Raman spectroscopy demonstrated minimal structural damage at lower fluences, with the clathrate framework retaining its integrity without converting to other phases. At the higher end of the fluence range implantation caused localized transitions from clathrate to amorphous silicon. Implant activation using rapid thermal annealing was examined with the clathrate structure stable up to 500 °C and being converted to diamond silicon above this temperature. Post-implantation and activation structural characterization showed evidence of damage reversal. Electron paramagnetic resonance studies provided indirect evidence of dopant incorporation. These findings establish a foundation for introducing alternative guests/dopants into the Si clathrate cages through ion implantation, advancing their tunability for next-generation quantum and optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗
DOE OSTI2025

Come for predictions, stay for complexity: synthesis and experimental probing of ionic conductivity in Li 9 B 19 S 33

Lithium thioborates, despite their potential cost-effectiveness and low density, have received considerably less attention as solid electrolytes compared to their thiophosphate counterparts. A primary obstacle to their widespread investigation has been the inherent challenge in synthesizing single-phase materials. Computational studies have predicted several lithium thioborate phases exhibiting high ionic conductivity, with Li 9 B 19 S 33 notably predicted to reach 80 mS cm −1 . However, experimental validation of these theoretical predictions remains absent. This work addresses this gap by detailing a successful synthesis of the previously elusive Li 9 B 19 S 33 phase, facilitated by in situ temperature dependent powder X-ray diffraction. Our findings reveal the peritectic nature of phase formation, necessitating an excess of boron sulfide in the reaction mixture. We further present a comprehensive structural characterization of Li 9 B 19 S 33 utilizing spectroscopic techniques like NMR, FT-IR, and diffuse reflectance and report on its ionic conductivity. Solid-state 6 Li NMR line narrowing experiments revealed an ion mobility activation energy of 0.26 eV whereas activation energies derived from impedance spectroscopy measurements were significantly higher, resulting in lower than theoretically predicted ionic conductivity.

Oppong, Richeal A. [Iowa State Univ., Ames, IA (Un↗
DOE OSTI2026

Phase-Selective Fractionation of Lignocellulosic Biomass Using a Lignin-Based Hydrophobic Deep Eutectic Solvent Biphasic System

Lignocellulose fractionation is a critical step in biomass valorization. Herein, we report a hydrophobic deep eutectic solvent (HDES)-mediated biphasic fractionation strategy that enables the simultaneous and selective separation of cellulose, hemicellulose, and lignin in a single process. Lignin-derived HDESs composed of thymol and 2,6-dimethoxyphenol (syringol) were combined with an acidic aqueous phase to create a water-HDES biphasic system, in which lignin was preferentially extracted into the HDES phase, hemicellulose-derived sugars were selectively solubilized in the aqueous phase, and cellulose was retained in the solid residue. Using wheat straw and poplar wood as representative herbaceous and woody biomass feedstocks, the HDES-acid system exhibited strong synergistic effects, achieving delignification up to 69.8% and xylan removal up to 93.6%. Structural characterization confirmed effective disruption of the lignocellulosic matrix and increased cellulose accessibility, resulting in markedly enhanced enzymatic saccharification, with glucose yields up to 96.2% for wheat straw. This work demonstrates a sustainable and efficient HDES-based biphasic fractionation platform that enables phase-selective separation of major lignocellulosic components and provides a foundation for further development of closed-loop biorefinery processes.

09 BIOMASS FUELS↗
DOE OSTI2026

Mutation of active site glutamate in serine hydroxymethyltransferase allows trapping a reactive intermediate: a combined neutron and X-ray crystallography study

Serine hydroxymethyltransferase (SHMT) is a pyridoxal-5′-phosphate (PLP) dependent enzyme that catalyzes a chemical transformation essential for the one-carbon (1C) metabolism. SHMT reversibly converts L-Ser into Gly and transfers a 1C unit to tetrahydrofolate (THF) to give 5,10-methylene-THF (5,10-MTHF). 5,10-MTHF, a 1C-unit donor, plays a crucial role in the downstream biomolecular syntheses required for the cell homeostasis and proliferation. SHMT is a prominent target for the drug discovery to battle bacterial and parasitic infections, and to treat various types of cancer. SHMT-catalyzed chemistry is governed by the general acid-base catalysis. Knowledge of the catalytic mechanism can aid drug design but can only be achieved when the atomic details of each reaction step are mapped, including accurate determination of hydrogen atom positions. Here we utilized the inactive E53Q mutant of Thermus thermophilus ( Tth ) SHMT to directly determine protonation states with room-temperature neutron crystallography and to capture a reactive intermediate containing the PLP-L-Ser external aldimine and THF in the enzyme active site. We observed protonation of the Schiff base nitrogen (N SB ) in the PLP internal aldimine but no change in the protonation states of other ionizable PLP groups and active site residues compared to wild-type Tth SHMT. X-ray structural analysis of the ternary intermediate complex E53Q-Ser-THF that eluded previous structural characterization shows the strategic positioning of the E53Q side chain in close proximity to the external aldimine and THF and reinforces the proposed role for E53 as the driver of proton transfer events along the reaction pathway.

Drago, Victoria N. [Oak Ridge National Laboratory ↗
DOE OSTI2020

The role of iron in magnetic damping of Mg(Al,Fe) 2 O 4 spinel ferrite thin films

© 2020 Author(s). We have investigated magnesium aluminum ferrite thin films with a range of iron concentrations and identified the optimal iron content to obtain high crystalline quality thin films with the low magnetic damping required for spin current-based applications. Epitaxial MgAl 2-x FexO4 films with 0.8 < x < 2.0 were grown by pulsed laser deposition on single crystal MgAl2O4 substrates and were characterized structurally and magnetically. We find that the x = 1.5 composition minimizes the room-temperature magnetic damping with a typical Gilbert damping parameter of α eff = 1.8 × 10-3. This minimized damping is governed by a competition between the more robust magnetic ordering with increased iron content, x, and the more defective structure due to larger film-substrate lattice mismatch with increased iron content. The temperature-dependent magnetization curves indicate that Tc is suppressed below room temperature for iron content x ≤ 1.2 and eventually suppressed entirely for x = 0.8. X-ray magnetic circular dichroism results indicate that for all x the magnetic moment is dominated by Fe 3 + cations distributed in a 60:40 ratio on the octahedral and tetrahedral sites, with minimal contribution from Fe 2 + cations. Films with x = 1.4-1.6 exhibit very strong ferromagnetic resonance and low Gilbert damping with α eff = (1.8-6) × 10-3, making them ideal candidates for microwave and spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Crystal structure and magnetic properties in semiconducting Eu 3-δ Zn x Sn y As 3 with Eu-Eu dimers

Magnetic structure and crystal symmetry, which primarily determine the time-reversal and inversion symmetry, may give rise to numerous exotic quantum phenomena in magnetic semiconductors and semimetals when arranged in different patterns. Here, a new layered magnetic semiconductor, Eu 3-δ Zn x Sn y As 3 , was discovered and high-quality single crystals were grown using the Sn flux. According to structural characterization by x-ray diffraction and atomic-resolution scanning transmission electron microscopy, Eu 3-δ Zn x Sn y As 3 is found to crystallize in a hexagonal symmetry with the space group P6 3 /mmc (No. 194). After examining different specimens, we conclude that their stoichiometry is fixed at ~Eu 2.6 Zn 0.65 Sn 0.85 As 3 , which meets the chemical charge balance. Eu 3-δ Zn x Sn y As 3 is composed of septuple (Eu 1-δ Sn y As 2 )-Eu-(Zn x As)-Eu sequences. The shortest Eu–Eu distance in the system is between two Eu layers separated by Zn x As along the c-axis. Magnetization measurement shows an antiferromagnetic ordering in Eu 3-δ Zn x Sn y As 3 at T N ~ 12 K, where the magnetic easy-axis is along the c-axis, and Mössbauer spectroscopy observes magnetic hyperfine splitting on Eu and Sn at 6 K. Magnetic anisotropy is significantly different from the ones along the ab-plane in other layered Eu-based magnetic semimetals. Heat capacity measurements confirm the magnetic transition around 12 K. Electrical resistivity measurement indicates semiconductor behavior with a band gap of ~0.86 eV. Finally, various Eu-based magnetic semiconductors could provide a tunable platform to study potential topological and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Growth and structure of alpha-Ta films for quantum circuit integration

Tantalum films incorporated into superconducting circuits have exhibited low surface losses, resulting in long-lived qubit states. The remaining loss pathways originate in microscopic defects that manifest as two level systems (TLSs) at low temperatures. These defects limit performance, so careful attention to tantalum film structures is critical for optimal use in quantum devices. In this work, we investigate the growth of tantalum using magnetron sputtering on sapphire, Si, and photoresist substrates. In the case of sapphire, we present procedures for the growth of fully-oriented films with α-Ta [1 1 1]//Al2O3 [0 0 0 1] and α-Ta [1 −1 0]//Al2O3 [1 0 −1 0] orientational relationships and having residual resistivity ratio (RRR) ∼ 60 for 220 nm thick films. On Si, we find a complex grain texturing with Ta [1 1 0] normal to the substrate and RRR ∼ 30. We further demonstrate airbridge fabrication using Nb to nucleate α-Ta on photoresist surfaces. For the films on sapphire, resonators show TLS-limited quality factors of 1.3 ± 0.3 × 106 at 10 mK (for a waveguide gap and conductor width of 3 and 6 μm, respectively). Structural characterization using scanning electron microscopy, x-ray diffraction, low temperature transport, secondary ion mass spectrometry, and transmission electron microscopy reveal the dependence of residual impurities and screw dislocation density on processing conditions. The results provide practical insights into the fabrication of advanced superconducting devices including qubit arrays and guide future works on crystallographically deterministic qubit fabrication.

42 ENGINEERING↗
DOE OSTI2025

Effects of stoichiometry and epitaxial strain on the stabilization of infinite-layer nickelates

The discovery of superconductivity in infinite-layer nickelates has sparked great interest due to their potential analogy with the unconventional cuprate superconductors. However, investigations of this system have been limited by the challenges in materials control and synthesis driven by substantial thermodynamic instability, making it difficult to reach an experimental consensus. Hence, establishing a robust synthetic route to highly crystalline infinite-layer nickelates is of paramount importance. Here, we present and discuss recent progress on the reproducible two-step synthesis of (Nd,Sr)NiO2 via the stabilization of high-quality perovskite nickelates and the subsequent topotactic transition to the infinite-layer phase. In particular, we discuss the important factors, such as cation stoichiometry and epitaxial strain, which significantly impact the crystallinity of both phases, accompanied by careful structural characterization. These results on robust synthesis can help accelerate the experimental investigation of the intrinsic physical properties of these complex strongly correlated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Mechanical design of the highly porous cuttlebone: A bioceramic hard buoyancy tank for cuttlefish

Cuttlefish, a unique group of marine mollusks, produces an internal biomineralized shell, known as cuttlebone, which is an ultra-lightweight cellular structure (porosity, ~93 vol%) used as the animal’s hard buoyancy tank. Although cuttlebone is primarily composed of a brittle mineral, aragonite, the structure is highly damage tolerant and can withstand water pressure of about 20 atmospheres (atm) for the species Sepia officinalis . Currently, our knowledge on the structural origins for cuttlebone’s remarkable mechanical performance is limited. Combining quantitative three-dimensional (3D) structural characterization, four-dimensional (4D) mechanical analysis, digital image correlation, and parametric simulations, here we reveal that the characteristic chambered “wall–septa” microstructure of cuttlebone, drastically distinct from other natural or engineering cellular solids, allows for simultaneous high specific stiffness (8.4 MN∙m/kg) and energy absorption (4.4 kJ/kg) upon loading. We demonstrate that the vertical walls in the chambered cuttlebone microstructure have evolved an optimal waviness gradient, which leads to compression-dominant deformation and asymmetric wall fracture, accomplishing both high stiffness and high energy absorption. Moreover, the distribution of walls is found to reduce stress concentrations within the horizontal septa, facilitating a larger chamber crushing stress and a more significant densification. Overall, the design strategies revealed here can provide important lessons for the development of low-density, stiff, and damage-tolerant cellular ceramics.

42 ENGINEERING↗
DOE OSTI2020

Coexpressed subunits of dual genetic origin define a conserved supercomplex mediating essential protein import into chloroplasts

Significance Chloroplasts are of vital importance in photosynthetic eukaryotic organisms. Like mitochondria, they contain their own genomes. Nevertheless, most chloroplast proteins are encoded by nuclear genes, translated in the cytosol, and must cross the chloroplast envelope membranes to reach their proper destinations inside the organelle. Despite its fundamental role, our knowledge of the machinery catalyzing chloroplast protein import is incomplete and controversial. Here, we address the evolutionary conservation, composition, and function of the chloroplast protein import machinery using the green alga Chlamydomonas reinhardtii as a model system. Our findings help clarify the current debate regarding the composition of the chloroplast protein import machinery, provide evidence for cross-compartmental coordination of its biogenesis, and open promising avenues for its structural characterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The smectic Z A phase: Antiferroelectric smectic order as a prelude to the ferroelectric nematic

We have structurally characterized the liquid crystal (LC) phase that can appear as an intermediate state when a dielectric nematic, having polar disorder of its molecular dipoles, transitions to the almost perfectly polar-ordered ferroelectric nematic. This intermediate phase, which fills a 100-y-old void in the taxonomy of smectic LCs and which we term the “smectic Z A ,” is antiferroelectric, with the nematic director and polarization oriented parallel to smectic layer planes, and the polarization alternating in sign from layer to layer with a 180 Å period. A Landau free energy, originally derived from the Ising model of ferromagnetic ordering of spins in the presence of dipole–dipole interactions, and applied to model incommensurate antiferroelectricity in crystals, describes the key features of the nematic–SmZ A –ferroelectric nematic phase sequence.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Active doping controls the mode of failure in dense colloidal gels

Mechanical properties of disordered materials are governed by their underlying free energy landscape. In contrast to external fields, embedding a small fraction of active particles within a disordered material generates nonequilibrium internal fields, which can help to circumvent kinetic barriers and modulate the free energy landscape. In this work, we investigate through computer simulations how the activity of active particles alters the mechanical response of deeply annealed polydisperse colloidal gels. We show that the “swim force” generated by the embedded active particles is responsible for determining the mode of mechanical failure, i.e., brittle vs. ductile. We find, and theoretically justify, that at a critical swim force the mechanical properties of the gel decrease abruptly, signaling a change in the mode of mechanical failure. The weakening of the elastic modulus above the critical swim force results from the change in gel porosity and distribution of attractive forces among gel particles, while below the critical swim force, the ductility enhancement is caused by an increase of gel structural disorder. Above the critical swim force, the gel develops a pronounced heterogeneous structure characterized by multiple pore spaces, and the mechanical response is controlled by dynamical heterogeneities. We contrast these results with those of a simulated monodisperse gel that exhibits a nonmonotonic trend of ductility modulation with increasing swim force, revealing a complex interplay between the gel energy landscape and embedded activity.

Zhou, Tingtao (ORCID:000000021766719X)↗
DOE OSTI2025

Mineralized sclerites in the gorgonian coral Leptogorgia chilensis as a natural jamming system

The soft corals (Cnidaria, Octocorallia), a diverse group of colonial marine invertebrates, can reversibly tune their body stiffness in response to external stimuli. This capability is attributed to their dynamic skeletal systems, which consist of thousands of mineralized skeletal elements, called sclerites, embedded within a gel-like matrix that swells/deswells and unjams/jams the sclerites, thus modulating skeletal stiffness. While sclerite morphology is widely used for species identification, its role in the mechanical performance of a soft coral’s skeletal system is largely unknown. Here, we investigated structure-jamming relationships in sclerite-based skeletal architectures using the red gorgonian octocoral Leptogorgia chilensis as a model system. The sclerites of L. chilensis exhibit a shaft-like geometry with two axial branches and two sets of triradiate side branches, which are aligned with the crystallographic symmetry of the constituent magnesium-containing calcite. By combining multiscale three-dimensional (3D) structural characterization, parametric geometrical modeling, 3D printing, mechanical testing, and discrete element simulations, we demonstrate how sclerite geometry achieves a balanced jamming performance in terms of stiffness, weight, strength, and fracture resistance in comparison to alternative geometries parametrically modified from the native sclerites (e.g., changes in the length and number of side branches). Here, we also found that these performance metrics are achieved through the effective interlocking among side and axial branches, which is further enhanced by the fractal-like microscopic spikes on the branch tips. The findings in this natural jamming system offer insights for designing synthetic mechanotunable material architectures for a wide range of applications, from soft robotics to mechanical dampeners.

36 MATERIALS SCIENCE↗