Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid propellants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Curable liquid hydrocarbon prepolymers containing hydroxyl groups and process for producing same

Production of hydroxyl containing curable liquid hydrocarbon prepolymers by ozonizing a high molecular weight saturated hydrocarbon polymer such as polyisobutylene or ethylene propylene rubber is discussed. The ozonized material is reduced using reducing agents, preferably diisobutyl aluminum hydride, to form the hydroxyl containing liquid prepolymers having a substantially lower molecular weight than the parent polymer. The resulting curable liquid hydroxyl containing prepolymers can be poured into a mold and readily cured, with reactants such as toluene diisocyanate, to produce highly stable elastomers having a variety of uses such as binders for solid propellants.

Rhein, R. A.↗

Combustion: Structural interaction in a viscoelastic material

The effect of interaction between combustion processes and structural deformation of solid propellant was considered. The combustion analysis was performed on the basis of deformed crack geometry, which was determined from the structural analysis. On the other hand, input data for the structural analysis, such as pressure distribution along the crack boundary and ablation velocity of the crack, were determined from the combustion analysis. The interaction analysis was conducted by combining two computer codes, a combustion analysis code and a general purpose finite element structural analysis code.

Chang, T. Y.↗

Assessment of chamber pressure oscillations in the Shuttle SRB

Combustion stability evaluations of the Shuttle solid propellant booster motor are reviewed. Measurement of the amplitude and frequency of low level chamber pressure oscillations which have been detected in motor firings, are discussed and a statistical analysis of the data is presented. Oscillatory data from three recent motor firings are shown and the results are compared with statistical predictions which are based on earlier motor firings.

Mathes, H. B.↗

An automated approach to design of solid rockets utilizing a special internal ballistics model

A pattern search technique is presented, which is utilized in a computer program that minimizes the sum of the squares of the differences, at various times, between a desired thrust-time trace and that calculated with a special mathematical internal ballistics model of a solid propellant rocket motor. The program is demonstrated by matching the thrust-time trace obtained from static tests of the first Space Shuttle SRM starting with input values of 10 variables which are, in general, 10% different from the as-built SRM. It is concluded that an excellent match is obtained.

Sforzini, R. H.↗

Examples of realistic aerosol particles collected in a cascade impactor

In this paper some scanning electron microscope photomicrographs showing examples of a variety of particulate aerosol shapes are presented. Compositions of particles also are presented. These particles represent samples from a number of different sources and locations including: solid propellant rocket motor plumes, active volcano plumes, the lower stratosphere over Sondrestrom, Greenland, and the upper troposphere over northern Texas. The particles were collected from aboard an aircraft with a cascade impactor which classified them according to aerodynamic size into 10 size intervals ranging from submicron to greater than 25 micrometers in diameter. The cascade impactor also served to measure the mass concentration as a function of particle size. The variety of shapes and compositions found among these particles suggest difficulties in obtaining reliable size distribution data from light scattering measurements.

Woods, D. C.↗

Combustion in an acceleration field: A survey of Soviet literature

The effect of an acceleration field on the burning rate of a solid propellant was measured from -900g's to +1000g's using both double base and ammonium perchlorate based propellants. The acceleration fields were simulated using a centrifuge device and the burning rate was recorded. Both metalized and non-metalized variations of each propellant were tested and it was found that acceleration fields affect the burning rate. For the most part the theoretical predictions and the experimental results agreed.

Radloff, S. J.↗

An investigation of the origin of the flow turning effect in combustion stability analysis

The concept of a "flow turning" effect in the combustion based on the fact that terms appear in the equations governing the acoustic oscillations in a one dimensional model of combustion in a solid propellant rocket that do not appear in a three dimensional model. A procedure is developed to allow comparison of one and three dimensional models by averaging over the cross section of the motor cavity. Results indicate that the one dimensional equations with mass addition do not contain any physical phenomena that are missing the three dimensional equations with appropriate boundary conditions. This raises significant questions about any procedure that is based on the difference between one and three dimensional results.

Vanmoorhem, W. K.↗

Report on JANNAF panel on shotgun/relative quickness testing

As the need for more energetic solid propellants continues, a number of problems arises. One of these is the tendency of high energy propellants to transition from burning (deflagration) to detonation in regions where the propellant is present in small particle sizes; e.g., in case bonding areas of a motor after a rapid depressurization causes a shear zone at the bond interface as the stressed propellant and motor case relax at different rates. In an effort to determine the susceptibility of propellants to high strain rate break up (friability), and subsequent DDT, the propulsion community uses the shotgun/relative quickness test as one of a number of screening tests for new propellant formulations. Efforts to standardize test techniques and equipment are described.

Gould, R. A.↗

Measurements of energy exchange between acoustic fields and non-uniform steady flow fields

Data were obtained for a resonance tube having a vent at the center in the lateral boundary, an average flow being introduced at the ends. Experiments were done for both circular and slot vents, over ranges of both frequency and Mach number. It was demonstrated that a subsonic exhaust vent in the lateral boundary of a cold flow resonance tube provides a gain of acoustic energy for the fundamental mode within the resonance tube. The gain of acoustic energy increases approximately linearly with the Mach number, as predicted by the one-dimensional analysis. The one-dimensional result gives the values for the slope representing the variation of the attenuation coefficient of the exhaust vent with respect to the average Mach number of the flow within roughly 30% of those measured. It has been verified that the subsonic vent produces a gain proportional to the average Mach number, proportional to the frequency, and independent of the shape. The results may be applicable to the study of vibration phenomena in solid propellant rocket engines.

Magiawala, K. R.↗

Shuttle solid rocket motor nozzle alternate ablative evaluation

A series of subscale tests are shown to suggest that a lower-cost ablative material than the rayon-based carbon ablative currently used in the Space Shuttle Solid Rocket Motor (SRM) may be used as a substitute. Six such ablatives with outstanding performance characteristics, using spun PAN and continuous pitch and PAN fibers instead of the present, continuous rayon, were identified in the course of tests with HTPB/AL/AP solid propellant grains with a burn time of 12 sec. The test nozzle features an initial throat diameter of 2.2 in. and a 6.1 expansion ratio. In addition to nozzle structural feature drawings, extensive test data tables and propellant formulation and properties tables are provided.

Powers, L. B.↗

Sterilizable Binder Is Stable at 135 degrees C

Polyurethane binder for solid propellants endures heat sterilization without decomposition based on an ester diol. Binder resists oxidation under prolonged exposure to 135 degrees C temperature, low enough in viscosity to be handled easily during processing, and readily mixed with oxidizers, such as ammonium perchlorate. Polyurethane is also suitable material for encapsulants, potting compounds, and coatings that must be sterilized.

Kalfayan, S. H.↗

The Scout Launch Vehicle program

The Scout Launch Vehicle Program to utilize solid propellant rockets by the DOD and to provide a reliable, low cost vehicle for scientific and applications aircraft is discussed. The program's history is reviewed and a vehicle description is given. The Vandenberg Air Force Base and the San Marco launch sites are described, and capabilities such as payload weight, orbital inclinations, payload volume and mission integration time spans are discussed. Current and future plans for improvement, including larger heat shields and individual rocket motors are also reviewed.

Foster, L. R., Jr.↗

Rhenium Prevents Corrosion

Rhenium layer inside carbon-composite thrust chamber prevents corrosion when liquid fluorine/hydrazine rocket engine is fired. Liner also eliminates erosion of solid propellant carbon nozzels.

Appel, M. A.↗

Combustion response to compositional fluctuations

A mechanism involving compositional fluctuations at certain frequencies is examined by which the heterogeneity of a composite solid propellant may contribute directly to the combustion response function of combustion instability theory. A combustion model appropriate to ammonium perchlorate (AP) is used to derive the combustion response to compositional fluctuations, and the properties of the combustion response are discussed in terms of the theoretical results obtained. The concentration exponent, i.e., the dependence of the burn rate on AP concentration, is found to be a signficant combustion parameter and to have a tremendous range of variability. It is suggested that the combustion response to compositional fluctuations may be a dominating factor in driving combustion instability.

Cohen, N. S.↗

Improvements in rocket engine nozzle and high altitude plume computations

The characteristics of rocket exhaust flow fields are very complex, and many phenomena are involved. Previously, it was necessary to use a multitude of codes to treat a nozzle/plume flow in detail. In connection with both computational and economic standpoints, however, it is desirable to have a single code which can treat all the dominant phenomena in a rocket nozzle/plume flow field. The present investigation has the objective to describe a nozzle plume flowfield code which has capabilities that do not presently exist in a single computer code. The RAMP code considered by Penny et al. (1976) was used as a basis in the development of the new code. The basic RAMP employs modular construction and provides a two-phase, reacting gas, supersonic inviscid nozzle/plume solution. Other capabilities needed, which in most cases already exist in other computer codes, were incorporated into the RAMP code to enhance its usefulness. Attention is given to results of plume calculations for bipropellant and solid propellant motors.

Smith, S. D.↗

Space Shuttle propulsion parameter estimation using optimal estimation techniques, volume 1

The mathematical developments and their computer program implementation for the Space Shuttle propulsion parameter estimation project are summarized. The estimation approach chosen is the extended Kalman filtering with a modified Bryson-Frazier smoother. Its use here is motivated by the objective of obtaining better estimates than those available from filtering and to eliminate the lag associated with filtering. The estimation technique uses as the dynamical process the six degree equations-of-motion resulting in twelve state vector elements. In addition to these are mass and solid propellant burn depth as the ""system'' state elements. The ""parameter'' state elements can include aerodynamic coefficient, inertia, center-of-gravity, atmospheric wind, etc. deviations from referenced values. Propulsion parameter state elements have been included not as options just discussed but as the main parameter states to be estimated. The mathematical developments were completed for all these parameters. Since the systems dynamics and measurement processes are non-linear functions of the states, the mathematical developments are taken up almost entirely by the linearization of these equations as required by the estimation algorithms.

Source record↗