SEARCH · Engineering Papers

Results for “small satellites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS2018

CARBO - The Carbon Observatory Instrument Suite - The Next Generation of Earth Observing Instruments for Global Monitoring of Carbon Gases

The Carbon Observatory Instrument Suite, or CARBO, consists of four carbon observing instruments sharing a common instrument bus, yet targeted for a particular wavelength band each with a unique science observation. They are: a) Instrument 1, wavelength centered at 756 nm for oxygen and solar-induced chlorophyll fluorescence (SIF) observations, b) Instrument 2, centered at 1629 nm, for carbon dioxide (CO2) and methane (CH4) observation, c) Instrument 3, centered at 2062 nm for carbon dioxide and d) Instrument 4, centered at 2328 for carbon monoxide (CO) and methane. From low-Earth orbit, these instruments have a field-of-view of 10 to 15 degrees, and a spatial resolution of 2 km square. These instruments have a spectral resolving power ranging from ten to twenty thousand, and can monitor columnaverage dry air mole fraction of carbon dioxide (XCO2) at 1.5 ppm, and methane (XCH4) at 7 ppb. These new instruments will advance the use of immersion grating technology in spectrometer instruments in order to reduce the size of the instrument, while improving performance. These compact, capable instruments are envisioned to be compatible with small satellites, yet modular to be configured to address the particular science questions at hand. Here we report on the current status of the instrument design and fabrication, focusing primarily on Instruments 1 and 2. We will describe the key science and engineering requirements and the instrument performance error budget. We will discuss the optical design with particular emphasis on the immersion grating, and the advantages this new technology affords compared to previous instruments. We will also discuss the status of the focal plane array and the detector electronics and housing. Finally, we report on a new approach – developed during this instrument design process - which enables simultaneous measurement of both orthogonal polarization states (S and P) over the field-of-view and optical bandpass. We believe this polarization sensing capability will enable science observations which were previously limited by instrumental and observational degeneracies. In particular: improved sensitivity to all species, better sensitivity to surface polarization effects, better constraints on aerosol scattering parameters, and superior discrimination of the vertical distribution of gases and aerosols.

Bernas, Michael↗

NASA NTRS2018

Modeling of Orbital and Attitude Dynamics of Nanosatellites Controlled via Active Electrostatic Charging

The large-scale exploration of airless bodies, such as asteroids and moons, is gaining interest, however it is limited by mobility issues: the lack of atmosphere, low gravity, and unknown soil properties pose difficult challenges for many forms of traditional locomotion. The environment in proximity of these bodies is also electrically charged due to interactions with solar wind and UV radiation. The EGlider (Electrostatic Glider) concept would be able to overcome these mobility issues by leveraging the natural environment, allowing operations in close proximity of the surface, while enabling long duration missions by minimizing propellant consumption. The EGlider is an advanced concept for small satellite mobility and propulsion, which relies on the electric fields naturally present around airless bodies in order to generate forces and torques useful for maneuvering. It does so by extending electrically charged appendages, which enable it to electrostatically soar above the surface. By differentially charging its electrodes it can also produce torques to control its attitude. The charges are maintained by continuous active ion or electron emission from the spacecraft, in order to cancel out the neutralizing influx of charges from surrounding plasma. An investigation of the spacecraft-plasma interaction was carried out. This included studying the effect of electrode geometry and calculating the charge-to-mass ratios required to enable several mission scenarios. Long, thin wire electrodes were identified to be the most power-efficient and would allow power-to-weight ratios achievable with current nanosatellite technologies. High electrode potential represents the main limiting factor for the system design. In order to test the feasibility of active control by means of differential charging, a simple 2D interaction model was developed, and a feedback controller to stabilize the vehicle was tested in a simulation environment. The results confirmed that good performance could be obtained for both position and attitude control. Finally, a dedicated software was developed for future simulation and testing of control strategies for the EGlider. This software allows to study the trajectory and attitude of an arbitrarily configured spacecraft in the proximity of an arbitrarily defined main airless body. The spacecraft can be assembled from basic parts, each with specified electrical, mass and optical properties. Efficient models allow to calculate gravitational and electrical interactions with the rotating main body and the local plasma field, as well as solar radiation pressure effects. Control models can be implemented as simple plug-in functions and easily tested. The preliminary validation campaign showed good matching with the reference cases that have been analyzed.

Corpino, Sabrina↗

NASA NTRS2021

Space Biology Research and Biosensor Technologies: Past, Present, and Future

In light of future missions beyond low Earth orbit (LEO) and the potential establishment of bases on the Moon and Mars, the effects of the deep space environment on biology need to be examined in order to develop protective countermeasures. Although many biological experiments have been performed in space since the 1960s, most have occurred in LEO and for only short periods of time. These LEO missions have studied many biological phenomena in a variety of model organisms, and have utilized a broad range of technologies. However, given the constraints of the deep space environment, upcoming deep space biological missions will be largely limited to microbial organisms and plant seeds using miniaturized technologies. Small satellites such as CubeSats are capable of querying relevant space environments using novel, miniaturized instruments and biosensors. CubeSats also provide a low-cost alternative to larger, more complex missions, and require minimal crew support, if any. Several have been deployed in LEO, but the next iterations of biological CubeSats will travel beyond LEO. They will utilize biosensors that can better elucidate the effects of the space environment on biology, allowing humanity to return safely to deep space, venturing farther than ever before.

space biology↗

NASA NTRSDate not supplied

Optical Time Transfer for Bistatic SAR Spacecraft

A spacecraft-to-spacecraft optical time-transfer simulation has been developed as a tool for informing NASA’s Surface Deformation and Change (SDC) mission architecture. The SDC mission will combine radar images from multiple spacecraft to improve understanding of the Earth’s sea-level and landscape changes. Spacecraft must be precisely synchronized in order to create sharp radar images. Simulation of multiple spacecraft time-synchronizing via laser communication can inform technology choices of a mission by providing a picosecond-precision level estimate of clock error. This timing and ranging simulation has been combined with a radar system performance analysis pipeline. The simulated timing errors are used to predict performance of bistatic SAR systems in the presence of oscillator noise and time synchronization in accuracy. This analysis includes both analytic approximation equations from existing literature, and a numerical radar simulation to extract key system performance parameters like phase error and signal-to-noise ratio (SNR)degradation. Precision time-transfer techniques facilitate the accurate synchronization of clocks between any combination of terminals. Most time-transfer technology for comparing two clocks at different terminals use radio frequencies (RF) to measure the time delay between the sending and receiving of signals. Laser technology offers the capability to transmit high data rates with systems that are of smaller size and lower power than comparable RF systems. The clocks on independent spacecraft will have some phase and frequency errors between them that result in clock drift. The two clock models that are included in this bi-directional MATLAB simulation are a cesium-based Chip-Scale Atomic Clock (CSAC) and a rubidium-based Miniature Atomic Clock (MAC). The CSAC has flown as hardware for small satellite missions such as the University of Florida’s CHOMPTT mission. A study of example orbits, including that of NASA NASA-ISRO Synthetic Aperture Radar Mission (NISAR) mission, and lasing rates demonstrate the impact of flight configuration parameters on the synchronization error between two spacecraft. The MATLAB timing simulation uses a Runge-Kutta 4th-order method to propagate spacecraft orbits and computes the light-travel time estimate between them. The simulation outputs the estimated range and estimated clock error based on a user-defined spacecraft cluster configuration. The radar simulation and analytic approximations are applied to evaluate a potential future NASA bistatic SAR constellation architecture. In the proposed architecture, satellites follow each other in the same orbit at 800 km altitude, with a 210 km baseline. We also baseline the CSAC as an ultra stable oscillator, and use NASA’s NISAR for baseline radar system parameters to compute a clock-system introduced phase error of 5.6 degrees without synchronization by frequent time transfer. We build on this base case with a sensitivity analysis of radar performance over a proposed range of constellation and radar system parameters. With this analysis pipeline, we comment on which radar parameters should or should not be changed to minimize synchronization requirements. This analysis technique could be extended or modified to evaluate the timing requirements of other geometries for other future multistatic SAR missions, or other interferometric satellite missions.

Surface Deformation and Change↗

NASA NTRS2019

Fully-polarimetric millimeter-wave spectrometers for measurement of Earth's magnetic field

Earth’s ionosphere responds dynamically over a wide range of temporal and spatial scales to changes in the magnetosphere and solar wind from above, and to neutral atmospheric dynamics from below. Determining the dynamics and coupling of Earth's magnetosphere, ionosphere, and atmosphere by vector magnetic field measurements at all altitudes is essential, as the field plays a major role in controlling the distribution of ionospheric plasma. It is difficult to measure the magnetic B-field, either locally or globally, at the altitudes of the upper mesosphere and lower thermosphere (UMLT) where the transfer of energy and momentum between the plasma and neutral components of the system occur. The 118-GHz imaging magnetometer will measure all four Stokes parameters as a function of frequency about the Zeeman-split center of the 118-GHz molecular oxygen line. We are developing an array of fully-polarimetric millimeterwave radiometer/spectrometers operating near 118 GHz. These low cost, low power, low mass polarimetric 118 GHz millimeter-wave array receivers do not require cooling to meet the sensitivity requirements. With digital spectrometers we will be able to integrate the complete end-to-end system. This work will enable a second generation small satellite mission with an off-nadir viewing instrument comprised of 120 such receivers (arranged so that each spot on the Earth is observed simultaneously by four receivers each) that will globally map the magnetic field in the mesosphere at 42-76 km altitude at a horizontal resolution ~100 km with 1-sigma error of 40-120 nT, in typical mesospheric temperature conditions.

Mannucci, Anthony↗

NASA NTRS2019

T2SL meta-surfaced digital focal plane arrays for earth remote sensing applications

Long-wavelength infrared (LWIR) focal plane arrays (FPAs) needed for Earth Science imaging, spectral imaging, and sounding applications have always been among the most challenging in infrared photodetector technology due to the rigorous material growth, device design and fabrication demands. Future small satellite missions will present even more challenges for LWIR FPAs, as operating temperature must be increased so that cooler (and radiator) volume, mass, and power can be reduced.

Hill, Cory↗

NASA NTRSDate not supplied

Dione: A Pathfinder Mission for Understanding the Iono-sphere-Thermosphere Responses to Magnetospheric Forcing

Dione is a NASA small satellite prototype for future constellations that in different configurations will provide global and localized measurements of Ionosphere-Thermosphere responses to Magnetospheric energy input in a variety of scales, enabling their better forecast and prediction. This is done with a comprehensive sensor package which includes four instruments: a miniaturized fluxgate magnetometer providing magnetic field measurements with two sensor heads, an ion sensor that measures vector plasma drifts and deduce the in-situ electric fields, an electrostatic analyzer that measures precipitating electrons and up-going secondary electrons, and a neutral mass spectrometer measuring total neutral density and composition. Dione is 3-axis stabilized in a circular low-earth (400-600 km), high-inclination orbit, traversing the auroral precipitation and high latitude currents in every orbit. This paper focuses on the mission-level architecture, but provides contextual information on the science objectives, instruments, and space-craft.

Jaime Esper↗

NASA NTRSDate not supplied

Design and Optimization of Steering Laws for Geocentric Solar Sailing

Solar sail technology has the potential to be a practical method of propulsion for future deep space Cubesats and small satellites. Although in general, deep space, heliocentric flight is the optimal regime for solar sailing, many near-term solar sail flight demonstrations have, or will occur in Earth-centered orbits. This is particularly true for low-cost, smallsat-based solar sail technology demonstration flights, such as the Planetary Society LightSail 1 and 2, and the upcoming NASA Advanced Composite Solar Sail System (ACS3). ACS3 will be the first spaceflight application of NASA’s newest smallsat deployable composite boom technology, and NASA’s first practical solar sail. Launch of ACS3 is currently anticipated for late 2021 or early 2022. In this paper, we will describe the challenges of operating solar sailing spacecraft in low Earth orbits, where, depending on initial orbital altitude and inclination, disturbances due to aerodynamic drag, eclipsing can be of the same order or greater than forces caused by solar radiation pressure. A notional smallsat-class solar sailing vehicle based on the ACS3 solar sail will be used as a reference for trajectory design and optimization studies. As a starting point we will assume initially circular orbits, and a locally optimal steering law designed to maximize the rate of change in semi major axis, similar to that described by McInnes. This will be generalized to orbits with arbitrary initial inclinations and non-zero eccentricities, and to account for atmospheric drag and eclipsing effects. Optimal steering laws for maximizing rate-of-change in orbit inclination and eccentricity will also be explored. Finally, we will examine potential for Earth-centered solar sailing mission applications beyond technology demonstrations, including: continuous observations from inside the Earth’s magnetotail; augmented geostationary capabilities from displaced geostationary orbits; and continuous polar observation for climate science investigations from pole-sitter orbits.

W. Keats Wilkie↗

NASA NTRSDate not supplied

Growth Curve Parameterization of Metabolic Activity of Yeast Cells for BioSentinel

The goal of the BioSentinel small satellite payload is to measure the effect of deep space radiation on the growth and metabolic activity of yeast cells. Raw test data is generated by fluidics cards containing yeast cells rehydrated at different periods, with metabolic activity measured by the reduction of alamarBlue. Each card well has a sensor array that measures the amount of red, green, and infrared light transmitted through the yeast culture. This illumination data is then converted to absorbance values, which are further converted into concentrations. The ultimate objective is to convert these concentrations into biologically-relevant metrics that can be compared against one another to determine changes due to differential radiation exposure. Beginning with IR absorbance data (corresponding to cell density) from ground studies, three parameters from a sigmoidal growth curve were extracted and analyzed: 𝜆 (lag phase), 𝜇 (max growth rate), and A (max cell growth). The data was fit to the Gompertz model of microbial growth using non-linear regression (Minitab), as the fit error was reduced compared to the simpler logistic growth curve. Graphs showed that the data contained a discrepancy (drift) in the lag phase that is attributable to a slow, constant loss of moisture. Correcting this discrepancy by fitting the first 25 hours of the data to a power function and subtracting these values from the absorbance readings obtained a better statistical fit to the growth curve in the lag phase. A power fit was selected over a linear fit because it reflected the effects of constant volume loss. This correction to the BioSentinel data analysis pipeline will enable quantitative statistical analysis of the effect of different levels of deep space radiation on yeast cells. Future work includes automation of drift correction and curve modeling to extract these parameters directly from data.

Growth Curve↗

NASA NTRS2021

Neptune Odyssey: A Flagship Concept for the Exploration of the Neptune–Triton System

The Neptune Odyssey mission concept is a Flagship-class orbiter and atmospheric probe to the Neptune–Triton system. This bold mission of exploration would orbit an ice-giant planet to study the planet, its rings, small satellites, space environment, and the planet-sized moon Triton. Triton is a captured dwarf planet from the Kuiper Belt, twin of Pluto, and likely ocean world. Odyssey addresses Neptune system-level science, with equal priorities placed on Neptune, its rings, moons, space environment, and Triton. Between Uranus and Neptune, the latter is unique in providing simultaneous access to both an ice giant and a Kuiper Belt dwarf planet. The spacecraft—in a class equivalent to the NASA/ESA/ASI Cassini spacecraft—would launch by 2031 on a Space Launch System or equivalent launch vehicle and utilize a Jupiter gravity assist for a 12 yr cruise to Neptune and a 4 yr prime orbital mission; alternatively a launch after 2031 would have a 16 yr direct-to-Neptune cruise phase. Our solution provides annual launch opportunities and allows for an easy upgrade to the shorter (12 yr) cruise. Odyssey would orbit Neptune retrograde (prograde with respect to Triton), using the moonʼs gravity to shape the orbital tour and allow coverage of Triton, Neptune, and the space environment. The atmospheric entry probe would descend in ∼37 minutes to the 10 bar pressure level in Neptune’s atmosphere just before Odysseyʼs orbit-insertion engine burn. Odysseyʼs mission would end by conducting a Cassini-like “Grand Finale,” passing inside the rings and ultimately taking a final great plunge into Neptuneʼs atmosphere.

Abigail M. Rymer↗

NASA NTRS2021

GPX2

GPX2is a technology demonstration mission that will provide a novel test-bed for Commercial-Off-the-Shelf (COTS) differential global positioning systems (dGPS) to enable future on-orbit assembly, docking, and formation-flying small satellite missions. While on-orbit,GPX2will assess the capability of multi-frequency COTS dGPS receivers.GPX2 is passively stabilized using a 2-meter gravity gradient boom, providing a local orbit horizon view to the GPX2 antennae and Iridium communication. By demonstrating dGPS on-orbit, GPX2 paves the way for on-orbit assembly and autonomous robotic operations using high-accuracy dGPS to measure relative proximity and orientation.

CubeSat↗

NASA NTRS2020

Low-energy Trajectories From Geosynchronous Transfer Orbits to Lunar Libration Orbits

The ability to reduce the cost of space missions beyond Earth orbit by leveraging innovative concepts is of great interest in the field of spaceflight. In this paper, the trajectory design for a mission from an inclined geosynchronous transfer orbit (GTO) to an Earth-Moon L2 Halo orbit is presented. The mission scenario for this investigation involves the use of a small satellite launched in a rideshare configuration and the use of a low-energy transfer to reach the target orbit. As a consequence of choosing a rideshare launch, the mission scenario entails critical uncertainties on the time of launch and injection parameters of the spacecraft, which could complicate the insertion into a low-energy transfer. Thus, the goal of the project is to develop a robust design methodology to deal with the launch uncertainties and assess launch readiness at any time of the year.

Wilson, Roby↗

NASA NTRS2021

Venus Flagship Mission Concept: A Decadal Survey Study

More than any other known planet, Venus is essential to our understanding of the evolution and habitability of Earth-size planets throughout the galaxy. We address two critical questions for planetary science: 1) How, if at all, did Venus evolve through a habitable phase? 2) What circumstances affect how volatiles shape habitable worlds? More than any other group, volatile elements have a strong influence on the evolutionary paths of rocky bodies and are critical to understanding solar system evolution. It is clear that Venus experienced a different volatile element history from the Earth and provides the only accessible example of one end-state of habitable Earth-size planets. Venus will allow us to identify the mechanisms that operate together to produce and maintain habitable worlds like our own.The (VFM) concept architecture relies on five collaborative platforms: an Orbiter, Lander, variable-altitude Aerobot and two Small Satellites (SmallSats) delivered via a single launch on a Falcon 9 heavy expendable. The platforms would use multiple instruments to measure the exosphere, atmosphere and surface at multiple scales with high precision and over time. VFM would provide the first measurements of mineralogy and geochemistry of tessera terrain to examine rocks considered to be among the most likely to have formed in a habitable climate regime. Landed, descent, aerial and orbital platforms would work synergistically to measure the chemical composition of the atmosphere including the Aerobot operating for 60 days in the Venus clouds. Loss mechanisms would be constrained by the SmallSats in two key orbits. The baseline payload for VFM includes instruments to make the first measurements of seismicity and remanent magnetism, the first long-lived (60 day) surface platform and the first life detection instrument at Venus to interrogate what could be an inhabited world.The VFM concept directly addresses each of the three Venus Exploration Analysis Group (VEXAG) goals as well as several of the strategic objectives of the 2020 NASA Science Plan, Planetary Science Division, Heliophysics and Astrophysics. The simultaneous, synergistic measurements of the solid body, surface, atmosphere and space environment provided by the VFM would allow us to target the most accessible Earth-size planet in our galaxy, and gain a profound new understanding of the evolution of our solar system and habitable worlds.

Segura, Marcia↗

NASA NTRSDate not supplied

BioSentinel: NASA’s First Deep Space Biological Mission

Since Apollo 17 in 1972, NASA has sent no humans or other biological organisms outside of Earth’s protective magnetosphere. NASA’s current Artemis program plans to put astronauts back on the Moon and eventually land human missions on Mars. One of the major challenges to long-duration crewed travel and habitation in deep space is an in-depth understanding of the biological effects of space radiation, often convoluted by the impact of reduced gravity. Such missions will require significant countermeasures, likely both technological and biomedical, to protect organisms from chronic radiation exposure. Small satellite missions like CubeSats can inform these countermeasures by investigating model organisms in relevant space environments. The BioSentinel mission is comprised of four segments developed at NASA Ames Research Center: a 6U CubeSat (1U = 10-cm cube), an ISS payload launched in December 2021 and two ground units, one for the mission’s CubeSat and one for the ISS payload. The last three segments have been operational since January 2022 and serve as experimental controls. BioSentinel’s 6U CubeSat is planned to launch as a secondary payload on the Artemis-1 rocket. It will be deployed on a lunar fly-by trajectory and into a heliocentric orbit. BioSentinel will be the first interplanetary satellite to study the biological response to space radiation outside Low Earth Orbit (LEO) in almost 50 years. BioSentinel is a complete, autonomous spacecraft capable of conducting experiments in deep space. Its 4U BioSensor payload is a fully automated and adaptable platform that can perform biological measurements with a range of microorganisms in multiple space environments, including the ISS, free flyers, and other platforms like the Lunar Gateway and lander vehicles. Once it reaches its orbit, BioSentinel’s CubeSat will measure the DNA damage response to ambient radiation in a model organism, the budding yeast Saccharomyces cerevisiae, which will be compared to information provided by an onboard radiation sensor and to data obtained in LEO (on ISS) and on Earth. Once in interplanetary space, fluidic cards containing desiccated yeast will be activated by growth medium addition at different time points throughout the mission. Growth and metabolic activity will be tracked continuously via optical measurements. This paper describes BioSentinel’s objectives, science, data management, and preliminary results from the ISS and ISS ground control segments.

BioSentinel↗

NASA NTRS2021

Enabling Mars Radio Occultation by Smallsats

We introduce a Mars Radio Occultation (RO) mission concept leveraging on small satellite (smallsat) technologies that will enable measurements that address both Mars science and exploration priorities. The RO technique measures the Doppler shift of radio signals of a spacecraft occulting behind a planet’s limb that contains information about the planet’s atmospheric density, temperature, and pressure. We design a smallsat constellation and simulate “crosslink” RO observations between the smallsats to determine the expected accuracy and spatiotemporal coverage of Mars RO atmospheric profiles. Such measurements are key to spacecraft Entry, Descent, and Landing (EDL) and Ascent from the Surface (AST) of Mars. Today, there are limited number of Mars atmospheric profiles with high vertical resolution, especially measurements near the surface that are difficult to obtain from satellite-based passive instruments due to atmospheric absorption. We find that crosslink ROs between a constellation of six smallsats provide global and diurnal cycle coverage with dozens of occultations per day, providing temperature information from near-surface up to ~45 km with altitude-dependent accuracy that ranges between <0.5 K at lower altitude to <5 K in the middle-to-upper atmosphere. Ionospheric ROs reveal an expected electron density of ~5 – 10% at the peak ionospheric height between 100 and 140 km. We conclude that observations obtained from a smallsat constellation can augment existing observing platforms by reducing observational gaps and yield high resolution measurements required for safe spacecraft operations during EDL and AST.

Martinez, German↗

NASA NTRSDate not supplied

Deployable Entry Vehicles for Future Science and Exploration Missions

Deployable Entry Vehicle (DEV) technology has made significant advances over the last decade with ground test development campaigns and flight test demonstrations. DEVs offer benefits over traditional rigid entry vehicles including lower volume and mass, while enabling larger payload delivery and greater landing access. A crucial mission benefit is the DEV capability to transform from a compactly stowed launch configuration to a high drag area entry system for delivery of landers, rovers, aerial platforms, and orbiters (via aerocapture). These benefits span the range of mission classes from Small Satellite to human-class exploration systems. This presentation will describe DEV technology development status, highlight mission concepts, and recommend future investments.

Mission Design↗

NASA NTRSDate not supplied

Flight Envelope Assessment of SmallSat Aerocapture Trajectories at Venus and Mars

Aerocapture is an increasingly studied orbit insertion concept for small satellite (SmallSat) missions beyond low Earth orbit (LEO). Compared to fully propulsive methods, aerocapture reduces the orbit-insertion propellant mass by approaching on a hyperbolic path and using the planetary atmosphere to reduce the vehicle’s velocity such that the final target orbit is achieved. This allows for an increase in payload mass delivered to orbit and a reduction in launch-to-orbit time. To analyze the feasibility at Venus and Mars, aerocapture flight envelope analysis is conducted by assessing the guidable trajectory space during atmospheric flight given entry conditions, vehicle properties, target parameters, and planet-dependent trajectory dispersions. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate both ballistic and lifting aerocapture trajectories with SmallSat-compatible aeroshell designs. The entry flight path angle is optimized to achieve a final target orbit for lift up/down and max/min control configurations. When plotted, the resulting area between the steep and shallow trajectories forms a flight envelope with planet-dependent ±3σ atmospheric, aerodynamic, and delivery state dispersion profiles applied. The results presented in this paper show that SmallSat aerocapture is feasible for lifting aeroshell designs at Mars and Venus as well as ballistic vehicle designs at Mars.

Jack A. Joshi↗

NASA NTRSDate not supplied

The NASA Solar Cruiser Mission - Solar Sail Propulsion Enabling Heliophysics Missions

Solar Cruiser is a Small Satellite Technology Demonstration Mission (TDM) to mature solar sail propulsion technology to enable near-term, high-priority breakthrough science missions as defined in the Solar and Space Physics Decadal Survey. Solar sails have the potential to provide high ΔV for many types of missions. Solar sails are large, mirror-like structures made of a lightweight material that reflects sunlight to propel the spacecraft. The continuous solar photon pressure provides thrust with no need for the heavy, expendable propellants used by conventional chemical and electric propulsion systems. Solar Cruiser will demonstrate a “sailcraft” platform with pointing control and attitude stability comparable to traditional platforms, upon which a new class of Heliophysics missions may fly. It will show sailcraft operation (acceleration, navigation, station keeping, heliocentric plane change) scalability of sail technologies such as the boom, membrane, and deployer to enable more demanding missions, such as high inclination solar imaging. Solar Cruiser will launch as a secondary payload with NASA’s Interstellar Mapping and Acceleration Probe (IMAP) in early 2025. The sailcraft will separate from the launch vehicle on a near-L1 trajectory (Sun-Earth Lagrangian Point 1; sunward of L1 along the Sun-Earth Line) and complete its primary mission in 11 months or less.

Solar Sail↗