Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sectionalizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Absolute measurement of the 242 Pu neutron-capture cross section

Here, the absolute neutron-capture cross section of 242 Pu was measured at the Los Alamos Neutron Science Center using the Detector for Advanced Neutron-Capture Experiments array along with a compact parallel-plate avalanche counter for fission-fragment detection. The first direct measurement of the 242 Pu(n,γ) cross section was made over the incident neutron energy range from thermal to ≈ 6 keV, and the absolute scale of the (n,γ) cross section was set according to the known 239 Pu(n,f) resonance at E n,R = 7.83 eV. This was accomplished by adding a small quantity of 239 Pu to the 242 Pu sample. The relative scale of the cross section, with a range of four orders of magnitude, was determined for incident neutron energies from thermal to ≈ 40 keV. Our data, in general, are in agreement with previous measurements and those reported in ENDF/B-VII.1; the 242 Pu(n,γ) cross section at the E n,R = 2.68 eV resonance is within 2.4% of the evaluated value. However, discrepancies exist at higher energies; our data are ≈30% lower than the evaluated data at E n ≈ 1 keV and are approximately 2σ away from the previous measurement at E n ≈ 20 keV.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of the In 115 ( γ , γ ' ) In 115 m inelastic scattering cross section in the 1.8 to 3.7 MeV energy range with monoenergetic photon beams

For the first time the excitation cross section of $^{115}\mathrm{In}$ to its first excited state at 336.24 keV has been measured with monoenergetic photon beams at 15 energies between 1.8 and 3.7 MeV. The measurements were performed at the High-Intensity Gamma-ray Source ($\mathrm{HI}{\gamma}\mathrm{S}$) facility with natural In targets and incident photon fluxes ranging from $0.7\times{}{10}^{7}{\gamma}/({\mathrm{cm}}^{2}{s})$ to $3.2\times{}{10}^{7}{\gamma}/({\mathrm{cm}}^{2}{s})$. The inelastic scattering cross section was obtained from the yield of the 336.24 keV deexcitation ${\gamma}$ rays. The cross-section values varied between < 0.05 and 28.7 ${\mu}\mathrm{b}$ at 1.8 and 3.7 MeV, respectively. Compared to standard photon inelastic scattering cross-section data in this energy range of medium-mass nuclei, these extremely small values are not completely unexpected, given the nature of the low-lying nuclear levels of $^{115}\mathrm{In}$. Model calculations, however, overestimate the measured cross-section data by approximately one order of magnitude. Using different choices for the $E1 {\gamma}$-ray strength function, the data can be well described. Finally, the data are important for improving our knowledge of the level scheme of $^{115}\mathrm{In}$, especially spin and parity assignments of already known states.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radiative-capture cross sections for the La 139 ( n , γ ) reaction using thermal neutrons and structural properties of La 140

A set of prompt partial γ-ray production cross sections from thermal neutron capture were measured for the La 139 ( n , γ ) reaction using a guided beam of subthermal (thermal and cold) neutrons incident on a nat La 2 O 3 target at the Prompt Gamma Activation Analysis facility of the Budapest Research Reactor. Absolute La 140 cross sections were determined relative to the well-known comparator 35 Cl(n,γ) cross sections from the irradiation of a stoichiometric nat LaCl 3 sample. Here, the total cross section for radiative thermal neutron capture on La 139 from the sum of experimentally measured cross sections observed to directly feed the La 140 ground state was determined to be $σ$ $^{expt}_{0}$ = 8.58 (50) b.

139La(n, γ), E=thermal and cold↗

Possible evidence of nonstatistical properties in the Cl 35 ( n , p ) S 35 cross section

In this work, the Cl 35 ( n , p ) and Cl 35 ( n , α ) cross sections at incident neutron energies between 2.42 and 2.74 MeV were measured using the Berkeley High Flux Neutron Generator. The cross sections for Cl 35 ( n , p ) were more than a factor of 3 to 5 less than all of the values in the neutron absorption data libraries, while the Cl 35 ( n , α ) cross sections are in reasonable agreement with the data libraries. Furthermore, the measured energy-differential cross section is consistent with a single resonance with a width of 293(46) keV. This finding indicates that, despite the high incident neutron energy, any attempt to model ($n, x$) cross sections in the vicinity of the $N = Z$ = 20 shell gap requires a resolved resonance approach rather than a Hauser-Feshbach approach.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of the $W$ boson rapidity, helicity, double-differential cross sections, and charge asymmetry in $pp$ collisions at $\sqrt {s}$ = 13 TeV

The differential cross section and charge asymmetry for inclusive W boson production at s=13 TeV is measured for the two transverse polarization states as a function of the W boson absolute rapidity. The measurement uses events in which a W boson decays to a neutrino and either a muon or an electron. The data sample of proton-proton collisions recorded with the CMS detector at the LHC in 2016 corresponds to an integrated luminosity of 35.9 fb-1. The differential cross section and its value normalized to the total inclusive W boson production cross section are measured over the rapidity range |yW|<2.5. In addition to the total fiducial cross section, the W boson double-differential cross section, d2σ/dpTℓd|ηℓ|, and the charge asymmetry are measured as functions of the charged lepton transverse momentum and pseudorapidity. The precision of these measurements is used to constrain the parton distribution functions of the proton using the next-to-leading order NNPDF3.0 set.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Measurement of Differential Charged Current Quasielasticlike $\nu_{\mu}$ -Argon Scattering Cross Sections with the MicroBooNE Detector

We report on the first measurement of flux-integrated single differential cross sections for charged-current (CC) muon neutrino ($\nu_{\mu}$) scattering on argon with a muon and a proton in the final state, 40 Ar $(\nu_{\mu},μp)X$. The measurement was carried out using the Booster Neutrino Beam at Fermi National Accelerator Laboratory and the MicroBooNE liquid argon time projection chamber detector with an exposure of 4.59 × 10 19 protons on target. Events are selected to enhance the contribution of CC quasielastic (CCQE) interactions. The data are reported in terms of a total cross section as well as single differential cross sections in final state muon and proton kinematics. We measure the integrated per-nucleus CCQE-like cross section (i.e., for interactions leading to a muon, one proton, and no pions above detection threshold) of (4.93 ± 0.76 stat ± 1.29 sys )×10 -38 cm 2 , in good agreement with theoretical calculations. The single differential cross sections are also in overall good agreement with theoretical predictions, except at very forward muon scattering angles that correspond to low-momentum-transfer events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient Monte Carlo event generation for neutrino-nucleus exclusive cross sections

Modern neutrino-nucleus cross section computations need to incorporate sophisticated nuclear models to achieve greater predictive precision. However, the computational complexity of these advanced models often limits their practicality for experimental analyses. To address this challenge, we introduce a new Monte Carlo method utilizing normalizing flows to generate surrogate cross sections that closely approximate those of the original model while significantly reducing computational overhead. As a case study, we built a Monte Carlo event generator for the neutrino-nucleus cross section model developed by the Ghent group. This model employs a Hartree-Fock procedure to establish a quantum mechanical framework in which both the bound and scattering nucleon states are solutions to the mean-field nuclear potential. The surrogate cross sections generated by our method demonstrate excellent accuracy with a relative effective sample size of more than 98.4%, providing a computationally efficient alternative to traditional Monte Carlo sampling methods for differential cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward virtual thin-beam 𝜈 cross-section measurements: A feasibility study of 𝜈-Ar interaction analysis with DUNE-PRISM

Neutrino-nucleus cross section measurements are critical for future neutrino oscillation analyses. However, our models to describe them require further refinement, and a deeper understanding of the underlying physics is essential for future neutrino oscillation experiments to realize their ambitious physics goals. Current neutrino cross section measurements provide clear deficiencies in neutrino interaction modeling, but almost all are reported averaged over broad neutrino fluxes, rendering their interpretation challenging. Using the concept of deep underground neutrino experiment-precision reaction independent spectrum measurement (DUNE-PRISM)—a movable near detector that samples multiple off axis positions—neutrino interaction measurements can be used to construct narrow virtual fluxes (less than 100 MeV wide). These fluxes can be used to extract charged-current neutrino-nucleus cross sections as functions of outgoing lepton kinematics within specific neutrino energy ranges. Based on a dedicated simulation with realistic event statistics and flux-related systematic uncertainties, but assuming an almost-perfect detector, we run a feasibility study demonstrating how DUNE-PRISM data can be used to measure muon neutrino charged-current integrated and differential cross sections over narrow fluxes. We find that this approach enables a largely model-independent reconstruction of powerful observables, including energy transfer, typically accessible only in electron scattering measurements, but that large exposures may be required for differential cross section measurements with few-percentage statistical uncertainties.

Neutrino interactions↗

Precision lattice parameter determination from transmission diffraction of thick specimens with irregular cross sections

Accurate determination of lattice parameters from X-ray diffraction requires that the diffraction angles be measured very precisely, and significant errors result if the sample–detector separation differs from that assumed. Transmission diffraction from bones, which have a complex cross section and must be left intact, is a situation where this separation is difficult to measure and it may differ from position to position across the specimen. Here, this article describes a method for eliminating the effect of variable sample cross section. Diffraction patterns for each position on the specimen are collected before and after 180° rotation about an axis normal to the cross section of interest. This places the centroid of the diffracting mass at the center of rotation and provides the absolute lattice parameters from the average apparent lattice parameters at the two rotation angles. Diffraction patterns were collected across the cross section of three specimens: a 3D-printed elliptical cylinder of Hyperelastic Bone (HB), which is composed primarily of synthetic hydroxyapatite (hAp), a 3D-printed HB model of the second metacarpal bone (Mc2), and a modern human Mc2 containing nanocrystalline carbonated apatite (cAp). Rietveld refinement was used to determine precise unit-cell parameters a apparent and c apparent for each pattern of each scan, and these values determined the actual average < a > and < c > for each sample. In conclusion, the results indicate that the 0°/180° rotation method works well enough to uncover variations approaching 1 × 10 -3 Å in cAp unit-cell parameters in intact bones with irregular cross sections.

36 MATERIALS SCIENCE↗

Precision measurement and interpretation of inclusive W + W - Z /γ* production cross sections with the ATLAS detector

High-precision measurements by the ATLAS Collaboration are presented of inclusive W + →ℓ + νW + →ℓ - $\bar{v}$ and Z/γ*→ℓℓ (ℓ = e,μ) Drell-Yan production cross sections at the LHC. The data were collected in proton–proton collisions at s√=7 TeV with an integrated luminosity of 4.6 fb -1 . Differential W + W - cross sections are measured in a lepton pseudorapidity range |η ℓ | <2.5. Differential Z/γ* cross sections are measured as a function of the absolute dilepton rapidity, for |y ℓℓ |<3.6, for three intervals of dilepton mass, m ℓℓ , extending from 46 to 150 GeV. The integrated and differential electron- and muon-channel cross sections are combined and compared to theoretical predictions using recent sets of parton distribution functions. The data, together with the final inclusive e ± p scattering cross-section data from H1 and ZEUS, are interpreted in a next-to-next-to-leading-order QCD analysis, and a new set of parton distribution functions, ATLAS-epWZ16, is obtained. The ratio of strange-to-light sea-quark densities in the proton is determined more accurately than in previous determinations based on collider data only, and is established to be close to unity in the sensitivity range of the data. Lastly, a new measurement of the CKM matrix element |V cs | is also provided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the ${\mathrm {t}\overline{\mathrm {t}}}$ production cross section, the top quark mass, and the strong coupling constant using dilepton events in pp collisions at $\sqrt{s}=13\,\text {Te}\text {V} $

A measurement of the top quark-antiquark pair production cross section $\sigma_{\mathrm{t\overline{t}}}$ in proton-proton collisions at a centre-of-mass energy of 13 TeV is presented. The data correspond to an integrated luminosity of 35.9 fb$^{-1}$, recorded by the CMS experiment at the CERN LHC in 2016. Dilepton events (e$^\pm\mu^\mp$, $\mu^+\mu^-$, e$^+$e$^-$) are selected and the cross section is measured from a likelihood fit. For a top quark mass parameter in the simulation of $m^{\mathrm{MC}}_{\mathrm{t}} =$ 172.5 GeV the fit yields a measured cross section $\sigma_{\mathrm{t\overline{t}}} =$ 803 $\pm$ 2 (stat) $\pm$ 25 (syst) $\pm$ 20 (lumi) pb, in agreement with the expectation from the standard model calculation at next-to-next-to-leading order. A simultaneous fit of the cross section and the top quark mass parameter in the POWHEG simulation is performed. The measured value of $m^{\mathrm{MC}}_{\mathrm{t}} =$ 172.33 $\pm$ 0.14 (stat) $^{+0.66}_{-0.72}$ (syst) GeV is in good agreement with previous measurements. The resulting cross section is used, together with the theoretical prediction, to determine the top quark mass and to extract a value of the strong coupling constant with different sets of parton distribution functions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Precise measurement of the tt¯ production cross-section and lepton differential distributions in eμ dilepton events from s=13TeVpp collisions with the ATLAS detector

The inclusive top quark pair (tt¯$$t\bar{t}$$) cross-section σtt¯$$\sigma _{t\bar{t}}$$ has been measured in proton–proton collisions at s=13TeV$$\sqrt{s}=13\,\text {TeV}$$, using 140fb-1$$140\,{\text {fb}^{-1}} $$ of data collected by the ATLAS experiment at the Large Hadron Collider. Using events with an opposite-charge eμ$$e\mu $$ pair and b-tagged jets, the cross-section is measured to be: σtt¯=829.3±1.3(stat)±8.0(syst)±7.3(lumi)±1.9(beam)pb,$$\begin{aligned} \sigma _{t\bar{t}} & = 829.3\pm 1.3\,\mathrm {(stat)}\ \pm 8.0\,\mathrm {(syst)}\ \pm 7.3\,\mathrm {(lumi)}\ \\ & \quad \pm 1.9\,\mathrm {(beam)}\,\textrm{pb}, \end{aligned}$$where the uncertainties reflect the limited size of the data sample, experimental and theoretical systematic effects, the integrated luminosity, and the proton beam energy, giving a total uncertainty of 1.3%. The result is used to determine the top quark pole mass via the dependence of the predicted cross-section on mtpole$${m_{t}^\textrm{pole}}$$, giving mtpole=172.8-1.7+1.5$${m_{t}^\textrm{pole}}=172.8^{+1.5}_{-1.7}$$ GeV$$\text {GeV}$$. The same event sample is used to measure absolute and normalised differential cross-sections for the tt¯→eμνν¯bb¯$$t\bar{t} \rightarrow e\mu u \bar{ u }b\bar{b} $$ process as a function of single-lepton and dilepton kinematic variables. Complementary measurements of eμbb¯$$e\mu b\bar{b} $$ production, treating both tt¯$$t\bar{t}$$ and Wt events as signal, are also provided. Both sets of differential cross-sections are compared to the predictions of various Monte Carlo event generators, demonstrating that the state-of-the-art generators Powheg MiNNLO and Powhegbb4l describe the data better than Powheghvq.

Aad, G↗

Wrapper for the optimization of cross-section generation in OpenMC

The "Wrapper for the optimization of cross-section generation in OpenMC" is Python-based software that runs the open-source Monte Carlo code OpenMC (https://docs.openmc.org/en/stable/ ) to generate cross-sections for any reactor geometry. The wrapper then optimizes those cross sections. The optimization aims to choose an energy group structure and a scattering representation that maximize accuracy with respect to continuous-energy results while avoiding significant computational expense. It then outputs these cross-sections in an ISOXML format readable by the Idaho National Lab code suite MOOSE (Olin William Calvin, Mark D DeHart, “Architecture for the Performance of Nuclear Fuel Depletion Calculations”, Idaho National Laboratory report, November 2019). The expected use-cases of this software include: -finding the best group structure and scattering representation for a specific reactor -testing the appropriateness of energy group structures for different reactor types -comparing energy group structures and scattering representations to each other -generating cross sections for use in deterministic codes, including ones found in the MOOSE suite The example reactor geometry included in this release is a generic reactor design, not based on any reactor in existence or in development. It was fabricated for the sole purpose of being a “testbed-geometry” upon which to develop this tool. Since the tool is designed to be generic, the nature of the test geometry is not very important, however, it is valuable to include as an example for users who are unfamiliar with developing reactor geometries for OpenMC.

Kreher, Miriam↗

Measurement of the t t &#xAF; production cross-section using e &#x3BC; events with b -tagged jets in p p collisions at s = 7 and 8 TeV with the ATLAS detector

CERN-LHC. The inclusive top quark pair production cross-section has been measured in proton-proton collisions at sqrt(s) = 7 TeV and sqrt(s) = 8 TeV with the ATLAS experiment at the LHC, using ttbar events with an opposite-charge e-mu pair in the final state. The measurement was performed with the 2011 7 TeV dataset corresponding to an integrated luminosity of 4.6 fb-1 and the 2012 8 TeV dataset of 20.3 fb-1. The numbers of events with exactly one and exactly two b-tagged jets were counted and used to simultaneously determine sigma(ttbar) and the efficiency to reconstruct and b-tag a b-jet from a top quark decay, thereby minimising the associated systematic uncertainties. The cross-section was measured to be: sigma(ttbar) = 182.9 +- 3.1 +- 4.2 +- 3.6 +- 3.3 pb (7 TeV) and sigma(ttbar) = 242.4 +- 1.7 +- 5.5 +- 7.5 +- 4.2 pb (8 TeV), where the four uncertainties arise from data statistics, experimental and theoretical systematic effects, the knowledge of the integrated luminosity and of the LHC beam energy. The results are consistent with recent theoretical QCD calculations at NNLO. Fiducial measurements corresponding to the experimental acceptance of the leptons are also reported, together with the ratio of cross-sections measured at the two centre-of-mass energies. The inclusive cross-section results were used to determine the top quark pole mass via the dependence of the theoretically-predicted cross-section on mpolet, giving a result of mpolet = 172.9 +2.5,-2.6 GeV. By looking for an excess of ttbar production with respect to the QCD prediction, the results were also used to place limits on the pair-production of supersymmetric top squarks with masses close to the top quark mass decaying to predominantly right-handed top quarks and a light neutralino, the lightest supersymmetric particle. Top squarks with masses between the top quark mass and 177 GeV are excluded at the 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of differential production cross-sections for a Z boson in association with b -jets in 7 TeV proton-proton collisions with the ATLAS detector

CERN-LHC. Measurements of differential production cross-sections of a Z boson in association with b-jets in pp collisions at sqrt(s) = 7 TeV are reported. The data analysed correspond to an integrated luminosity of 4.6 fb^{-1} recorded in 2011 with the ATLAS detector at the Large Hadron Collider. Particle-level cross-sections are determined for events with a Z boson decaying into an electron or muon pair, and containing b-jets. For events with at least one b-jet, the cross-section is presented as a function of the Z boson transverse momentum and rapidity, together with the inclusive b-jet cross-section as a function of b-jet transverse momentum, rapidity and angular separations between the b-jet and the Z boson. For events with at least two b-jets, the cross-section is deter mined as a function of the invariant mass and angular separation of the two highest transverse momentum b-jets, and as a function of the Z boson transverse momentum and rapidity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the W W + W Z cross section and limits on anomalous triple gauge couplings using final states with one lepton, missing transverse momentum, and two jets with the ATLAS detector at s = 7 TeV

CERN-LHC. The production of a W boson decaying to (e nu) or (mu nu) in association with a W or Z boson decaying to two jets is studied using 4.6 fb-1 of proton-proton collision data at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC. The combined WW+WZ cross section is measured with a significance of 3.4 sigma. Two cross sections are measured, a fiducial and a total cross section. The cross sections are measured assuming the SM ratio between the WW and WZ cross sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of inclusive jet and dijet cross-sections in proton-proton collisions at s = 13 TeV with the ATLAS detector

Measurement of inclusive jet cross-sections with the ATLAS Detector at a centre-of-mass energy 13 TeV Inclusive jet and dijet cross-sections are measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The measurement uses a dataset with an integrated luminosity of 3.2 fb$^{−1} recorded in 2015 with the ATLAS detector at the Large Hadron Collider. Jets are identified using the anti-kt algorithm with a radius parameter value of R=0.4. The inclusive jet cross-sections are measured double-differentially as a function of the jet transverse momentum, covering the range from 100 GeV to 3.5 TeV, and the absolute jet rapidity up to |y|=3. The double-differential dijet production cross-sections are presented as a function of the dijet mass, covering the range from 300 GeV to 9 TeV, and the half absolute rapidity separation between the two leading jets within |y|<3, y∗, up to y∗=3. Next-to-leading-order, and next-to-next-to-leading-order for the inclusive jet measurement, perturbative QCD calculations corrected for non-perturbative and electroweak effects are compared to the measured cross-sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Annual Report FY2013-- A Kinematically Complete, Interdisciplinary, and Co-Institutional Measurement of the 19F(α,n) Cross-section for Nuclear Safeguards Science

The goal of this proposal is to enable neutron detection for precision Non-Destructive Assays (NDAs) of actinide-fluoride samples. Neutrons are continuously generated from a UFx matrix in a container or sample as a result of the interaction of alpha particles from uranium-decay α particles with fluorine nuclei in the matrix. Neutrons from 19F(α,n)22Na were once considered a poorly characterized background for assays of UFx samples via 238U spontaneous fission neutron detection [SMI2010B]. However, the yield of decay-α-driven neutrons is critical for 234,235U LEU and HEU assays, as it can used to determine both the total amount of uranium and the enrichment [BER2010]. This approach can be extremely valuable in a variety of safeguard applications, such as cylinder monitoring in underground uranium storage facilities, nuclear criticality safety studies, nuclear materials accounting, and other nonproliferation applications. The success of neutron-based assays critically depends on an accurate knowledge of the cross section of the (α,n) reaction that generates the neutrons. The 40% uncertainty in the 19F(α,n)22Na cross section currently limits the precision of such assays, and has been identified as a key factor in preventing accurate enrichment determinations [CRO2003]. The need for higher quality cross section data for (α,n) reactions has been a recurring conclusion in reviews of the nuclear data needs to support safeguards. The overarching goal of this project is to enable neutron detection to be used for precision Non- Destructive Assays (NDAs) of actinide-fluoride samples. This will significantly advance safeguards verification at existing declared facilities, nuclear materials accounting, process control, nuclear criticality safety monitoring, and a variety of other nonproliferation applications. To reach this goal, Idaho National Laboratory (INL), in partnership with Oak Ridge National Laboratory (ORNL), Rutgers University (RU), and the University of Notre Dame (UND), will focus on three specific items: (1) making a precision (better than 10 %) determination of the absolute cross section of the 19F(α,n)22Na reaction as a function of energy; (2) determining the spectrum of neutrons and γ-rays emitted from 19F(α,n)22Na over an energy range pertinent to NDA; and (3) performing simulations with this new cross section to extract the neutron yield (neutrons/gram/second) and resulting neutron- and gamma ray-spectra when α particles interact with fluorine nuclei in actinide samples, to aid in the design and reduce uncertainty of future NDA measurements and simulations.

VANDLE, HPGe gamma-ray detector, liquid neutron de↗