Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “remediation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Intrinsically Conductive {pi}‑d Conjugated Layers with Co–N4 Active Sites for Efficient Nitrate Electrocatalysis and Zinc-Nitrate Batteries

Electrochemical synthesis of ammonia from nitrate has been extensively investigated as a potential alternative to the energy-intensive Haber-Bosch process. This approach not only operates under ambient conditions but also simultaneously removes nitrate contaminants while producing ammonia as a value-added product. However, the ongoing quest lies in designing an efficient electrocatalyst that achieves a high ammonia yield rate, high selectivity, and long-term stability. Herein, we report the outstanding performance of a Co–N4 coordinated π-d layered Co3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) in nitrate electrocatalysis. The unique combination of abundant Co–N4 active sites and superior electrical conductivity enables significant electrocatalytic activity, delivering a maximum ammonia yield rate of 56.8 mg cm–2 h–1 at −0.8 V vs RHE and a Faradaic efficiency of ∼91% at −0.4 V vs RHE. Mechanistic analysis reveals that alkaline conditions accelerate water dissociation to generate adsorbed hydrogen intermediates (H*), which are utilized by Co–N4 sites to drive the stepwise hydrogenation of nitrate to ammonia while suppressing competing hydrogen evolution reaction (HER) pathways. Furthermore, integration of this catalyst into a zinc-nitrate battery resulted in a maximum power density of 5.3 mW cm–2 and an open-circuit potential of ∼1.45 V. These results highlight the potential of π-d conjugated Co–N4 materials as an efficient catalyst for both environmental remediation and energy conversion.

Namvar, shahrirar↗
DOE OSTI2022

Tailored Mesoporous Microspheres by Polymerization-Induced Microphase Separation in Suspension

We describe the preparation of block polymer beads by aqueous suspension polymerization to create poly(caprolactone) (PCL)-block-poly(styrene-co-divinylbenzene) beads that can be selectively etched under basic conditions to yield mesoporous polymer microspheres with uniform pore size. Polyvinylalcohol was used to stabilize the suspension polymerization in which styrene and divinylbenzene monomers were polymerized from a PCL macrochain transfer agent (macroCTA). The resulting polymerization-induced microphase separation process led to a nanostructured bicontinuous morphology. The particle size and pore size were independently tunable: the particle size was controlled by the stir rate of the suspension polymerization-yielding average diameters ranging from 60 to 300 μm-while the pore size was determined by the molar mass of the PCL block, with the mode pore diameters being 6 nm and 11 nm after etching beads made using 13 and 45 kg/mol PCL blocks, respectively. Based on nitrogen sorption measurements, the surface areas of the beads were ~300 m 2 /g when using a PCL macroCTA of 13 kg/mol. The beads were homogenous throughout on the micron length scale as determined by confocal Raman microscopy and lacked an impermeable skin layer as confirmed by scanning electron microscopy. Furthermore, the scalability of suspension polymerization allows for the simple synthesis of large quantities of thermoset microspheres with uniform pore size. We also demonstrate the ability to incorporate functional pore walls into the beads using multiblock precursor polymers. These functionalized mesoporous polymer beads show high affinity for ionic dyes in aqueous solutions (as a proof of principle) and remove dye from the solution at rates exceeding those of commercial ion-exchange resins. The developed procedure could be used to generate other functional surface chemistries with important applications in heterogeneous catalysis, chromatography, and water remediation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

3D Printing of Polyelectrolyte Complex-Integrated Photocurable Hydrogel Resins

In this study, we developed a photocurable hydrogel resin incorporating a polyelectrolyte complex (PEC) for 3D printing. Acrylamide-based monomers were formulated with varying PEC contents (0–15 wt %) in an aqueous KBr medium to fabricate patterned porous hydrogel structures. The morphology of printed hydrogels was characterized by field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. Notably, the PEC5 and PEC10 formulations exhibited optimal thermal stability and compressive properties, attributed to the homogeneous distribution of PEC domains within the hydrogel matrix. Furthermore, dye adsorption experiments demonstrated excellent removal efficiency, highlighting the potential of PEC-containing hydrogels for environmental remediation applications, particularly in the treatment of dye-contaminated wastewater.

Yang, Jinchul [University of Tennesse Knoxville]↗
DOE OSTI2022

PdCu Electrocatalysts for Selective Nitrate and Nitrite Reduction to Nitrogen

Electrocatalytic conversion of nitrate in waste can enable efficient waste remediation (NO 3 - to N 2 ) or waste valorization (NO 3 - to NH 4 + ) depending on the selectivity of the catalyst. Palladium and copper electrocatalysts typically exhibit ideal nitrate and nitrite binding properties, allowing for effective destruction of nitrate. However, rational steering of selectivity through material design remains a critical challenge for PdCu electrocatalyst. Here, we use the electrochemical underpotential deposition method to synthesize palladium nanocube electrocataysts with controlled copper surface coverage (e.g., partial and full copper coatings). We then examine the potential for NO 3 - destruction (conversion) and NO 2 - reduction reaction. We identify that partial copper-coated Pd nanocubes not only effectively facilitate the reduction of 95% of NO 3 - but also increase the reduction of NO 2 - to N 2 with 89% selectivity over 20 consecutive cycles (80 h). We also show that under these conditions, the Pd(100) surface facet is exposed. Complete copper-covered Pd nanocubes effectively facilitate the reduction of ~99% of NO 3 - . Complete coverage of copper; however, prevented exposure of Pd(100) surface facet, promoting the selective reduction of NO 2 - to NH 4 + with a 70% selectivity over 20 consecutive cycles (80 h). Density functional theory (DFT) calculations show that NO 3 - and NO 2 - adsorb more strongly on the Cu(100) surface compared to the Pd(100) surface, while the NO* intermediate generated from NO 3 - or NO 2 - reduction adsorbs more strongly on the Pd surface. Furthermore, barrier calculations show that NO* can readily migrate from the Cu domain to the Pd domain and that the N–N coupling barrier on Pd is significantly diminished at high NO* coverage. Together, these results suggest that the high N 2 selectivity observed on the PdCu electrocatalyst is caused by the spillover of NO* from the Cu domains to the Pd domains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Selective Electrocatalytic Reduction of Nitrous Oxide to Dinitrogen with an Iron Porphyrin Complex

Nitrous oxide (N 2 O) is the third largest contributor to anthropogenic greenhouse gas emissions and plays a detrimental role in the depletion of ozone. Despite the contribution of N 2 O as an atmospheric pollutant, there are currently only a few examples of electrochemical N 2 O remediation to N 2 . Herein we report the electrocatalytic deoxygenation of N 2 O by iron tetraphenylporphyrin (FeTPP) to form N 2 with quantitative Faradaic efficiency and an observed rate of 1.91 s –1 . No degradation was observed after controlled potential electrolysis. Mechanistic investigation of the proposed catalytic steps determined that hydrogen-bond donors are critical for accelerating N 2 O activation and that proton transfer is involved in the rate-determining step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantification of Reactive Oxygen Species Produced from Electrocatalytic Materials

Oxygen electrochemistry goes beyond O 2 , as the formation of reactive oxygen species (ROS) such as H 2 O 2 and O 3 during water oxidation is key in the destruction of persistent pollutants in water remediation technologies as well as in the degradation of fuel cell and electrolyzer components. In this study, we developed an in situ method utilizing the rotating ring-disk electrode technique to quantify the formation of O 2 , O 3 , and H 2 O 2 species across a broad pH range (1–8.3). Oxygen selectivity trends over Pt, IrO 2 , and PbO 2 surfaces reveal that even O 2 evolution catalysts may produce small yet measurable amounts of ROS, further modulated by pH and electrode potential. In conclusion, these findings emphasize the need to probe the selectivity of oxygen electrochemistry for a more complete picture of advanced materials for electrochemical technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pathways of Photocatalytic Oxidation of Formic Acid on Dry and Hydrated Anatase TiO 2 Surfaces

The photocatalytic oxidation of formic acid (FA), which is one of the most abundant volatile organic compounds, is a promising air remediation technology inspired by nature. However, the detailed mechanism of this photocatalytic reaction on the surface of TiO 2 , a typical photocatalyst, is not yet well-understood. In this work, we present a computational mechanistic study of the thermal vs photocatalytic oxidation of FA on dry and hydrated anatase TiO 2 (101) surfaces, based on periodic hybrid density functional theory (DFT) calculations, in which the photooxidation is treated as an excited-state process in a constrained triplet spin state. We first compare the adsorption modes of FA on the anatase (101) surface in the ground and excited states, followed by identification of the corresponding reaction intermediates that lead to the formation of CO 2 . We unveil the pivotal role of photogenerated holes localized at surface under-coordinated oxygen sites in mediating the C−H bond cleavage, thereby promoting CO 2 formation through a highly stable intermediate and an exergonic reaction step. Further investigation of the effect of coadsorbed water molecules shows that hydrogen bonding with water stabilizes FA in a monodentate configuration. This is favored over the unreactive bidentate structure that is the most stable under dry conditions, thus providing insight into the experimentally observed increase of the reaction rate in the presence of water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simultaneous Insight into Dissolution and Aggregation of Metal Sulfide Nanoparticles through Single-Particle Inductively Coupled Plasma Mass Spectrometry

Nanoparticles (NPs) and their colloidal aggregates are ubiquitous and play important roles in the transport and release of metals. Knowledge of their dissolution rates and aggregation behavior in solution are crucial for better prediction of their fate in biogeochemical cycling, ecotoxicity, and environmental remediation. There are however significant technical challenges to accurately obtain such information as a result of the heterogeneity and highly dynamic transformation exhibited by NPs, particularly at relatively low particle concentrations in aqueous systems. Here, we quantitatively examine the simultaneous dissolution and aggregation behavior of metal sulfide NPs using single-particle inductively coupled plasma mass spectrometry (spICP–MS). We focus on nickel sulfide (NiS), with additional data presented for copper sulfide (CuS) and cobalt sulfide (CoS). The kinetics of metal release (dissolution and disaggregation) of NiS was fastest under strongly oxidizing conditions (from 0.04 to >3 min –1 with H 2 O 2 ) and were slower under near-neutral (HEPES buffer/H 2 O) and acidic (1 mM HNO 3 ) conditions (≤0.006 min –1 ). Metal release kinetics in HNO 3 was not faster than in H 2 O or HEPES, suggesting that the solution pH has an influence over both the dissolution kinetics of individual particles and the NP aggregation states, which in combination affect metal release rates over time. Between different metal sulfides, the measured metal release rates were largely consistent with predictions based on the crystallinity, solubility products, and specific surface areas of the NPs, following an order of CoS > NiS > CuS. Here, the spICP–MS approach described here can be easily applied to the characterization of metal release and aggregation of other NPs at low concentrations (~10 5 particles/mL) typically found in natural environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Emergent Behavior at the Calcite–Water Interface during Reactive Transport in a Simple Microfluidic Channel

Geochemical reactive transport processes in natural mineral-fluid systems may produce a wide array of emergent phenomena that are difficult to predict from basic principles and to reproduce in model systems. In this study, we present experimental results obtained from a simple microfluidic system with which we explored the consequences of reacting the calcite (104) cleavage surface with an acidic Pb-bearing solution (pH = 3.5, [Pb] total = 5 mM) as a function of flow rate. This system is relevant to passive remediation systems for Pb-rich acid mine drainage. We observed periodic banding in the amounts of Pb sorption at flow velocities ≥ 926 μm s -1 , where the band spacing was spatially correlated with the amount of calcite dissolution and the development of micropyramidal topography on the calcite (104) surface. The equivalent coverage of Pb deposited in these Pb-rich bands was at least several monolayers per unit cell, yet there was no evidence for precipitation of any secondary Pb phase implying incorporation of Pb within the near-surface calcite lattice. We also observed spatial variations in nucleation and growth of euhedral secondary Pb-carbonate minerals hydrocerusite and cerussite at flow rates ≤ 278 μm s -1 ,. These findings demonstrate potential for exploiting the rich phenomenology afforded by the interplay among transport phenomena and chemical kinetics in experimental systems designed to yield deeper insights into geochemical self-organization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Decadal-Scale Hydrothermal Alteration of Basalt: Implications for Long-Term Reactivity in Subsurface Technologies

Global demands to secure critical mineral supply chains and managing water resources require innovative resource management strategies. Subsurface basalt reservoirs offer a dual-purpose application, where CO2 enhanced critical metal recovery can be coupled with water remediation strategies for the extraction of economically important and environmentally relevant elements. This study utilizes static batch experiments conducted on Columbia River Basalt Group samples to evaluate long-term fluid–rock interactions relevant to coupled subsurface applications. Samples were reacted under elevated temperature and pressure conditions, for 296 and 4,061 days, providing a unique dataset to assess geochemical evolution, element partitioning, and aqueous chemistry over decadal timescales. The alteration was dominated by silicate, aluminosilicate, and oxide phases. Progressive hydrothermal alteration increased the cation exchange capacity through the formation of secondary minerals (e.g. clays and zeolites), influencing solute retention, ion exchange behavior, and aqueous chemistry. Grain-scale and bulk analyses revealed selective cation release and retention patterns, establishing a mechanistic baseline for predicting element mobility. These geochemical constraints inform the prospective use of CO2-enhanced metal recovery for critical resources (e.g. Co, Ni, Mn, Mg, Ti, Fe) and associated water-quality impacts, providing a foundation for the design and management of engineered fluid–rock systems in basalt reservoirs.

Gibson, Marie N.↗
DOE OSTI2020

Quantification of Inactive Lithium and Solid–Electrolyte Interphase Species on Graphite Electrodes after Fast Charging

Rapid charging of Li-ion batteries is limited by lithium plating on graphite anodes, whereby Li+ ions are reduced to Li metal on the graphite particle surface instead of inserting between graphitic layers, which directly contributes to cell capacity loss because of the low reversibility of the Li plating/stripping process. Furthermore, precisely identifying the onset and amount of Li plating is therefore vital in order to remedy these issues. We demonstrate a titration technique with a detection limit of 20 nmol (5 × 10 –4 mAh) of Li that can be used to quantify inactive Li that remains on the graphite electrode after fast charging. The titration is extended to quantify the total amount of solid carbonate species and lithium acetylide (Li 2 C 2 ) within the solid–electrolyte interphase (SEI), and electrochemical modeling is used to determine the Li plating exchange current density (10 A/m 2 ) and stripping efficiency (65%) of plated Li metal on graphite. These techniques provide a highly accurate measure of the onset of Li plating and quantitative insight into graphite SEI evolution during fast charging.

25 ENERGY STORAGE↗
DOE OSTI2025

Comparing Advanced Bipolar Membranes for High-Current Electrodialysis and Membrane Electrolysis

Advanced bipolar membranes (BPMs) with low water-dissociation overpotential (ηwd) may enable new electrochemical technologies for electrolysis, fuel cells, acid–base synthesis, brine remediation, lithium-battery recycling, and cement production. However, these advanced BPMs have only been demonstrated in BPM water electrolysis (BPMWE) configurations where the BPM is under static compression by the porous-transport layers. It is important to study these BPMs in applications like electrodialysis where large degrees of static compression are not possible. We present a BPM electrodialysis (BPMED) platform to measure water-dissociation overpotential (ηwd) and compare BPMWE and BPMED systems. We show advanced BPMs with half the ηwd compared to commercial BPMs for BPMED while maintaining ∼90% current efficiency from 0.05–0.5 A cm–2. The BPMED ηwd values are, however, about 0.2 V higher at 0.5 A cm–2 than those for BPMWE. Regardless, these results show that BPMs developed and optimized in BPMWE applications are well-suited for next-generation high-current-density BPMED technologies.

Vulpin, Olivia T↗
DOE OSTI2026

Electrocoagulation in Water Treatment: Targeted Contaminant Removal and Laboratory Best Practices

Electrocoagulation for water treatment offers many advantages over traditional treatment technologies, including improved energy efficiency and modularity. One challenge with electrocoagulation is the lack of standardization in the methodology and reporting. This review provides a novel contribution by examining the past literature using a uniform metric (charge loading) as a basis for comparison, highlighting the importance of uniform reporting practices in this field. Furthermore, this review provides practical guidance for experimentalists in standardizing the electrocoagulation design and operating procedures. First, we present a comprehensive overview of contaminant-specific electrocoagulation as an electrochemical treatment technology for processing industrial, municipal, and agricultural water, with a focus on aluminum and iron electrocoagulation. We detail the fundamental mechanisms that allow for constituent removal during pretreatment. Specifically, we highlight electrocoagulation’s potential for organics, metalloids, microbes, and hardness remediation, examining the optimal removal conditions in terms of charge loading and current density. We conclude this work with some experimental best practices for lab-scale electrocoagulation experiments.

aluminum↗
DOE OSTI2026

Bioorthogonal Click Chemistry for Antibody-Free Profiling of Acetylation, Propionylation, and Butyrylation in Pseudomonas aeruginosa and Methicillin-Resistant Staphylococcus aureus

Lysine acylation is a posttranslational modification (PTM) conserved in all domains of life and is essential for regulating diverse biological processes. Traditional methods for investigating acylation rely on anti-acyl-lysine antibodies, which are costly and time-consuming and often exhibit variable affinity. To remedy these pitfalls, we developed an antibody-free method for bacterial acylome enrichment using bioorthogonal click chemistry coupled with tandem mass spectrometry. We applied this approach to the pathogens Pseudomonas aeruginosa and methicillin-resistant Staphylococcus aureus (MRSA) to explore the biological significance of acylation in each organism. We characterized the acetylome, propionylome, and butyrylome in P. aeruginosa UCBPP-PA14 and the acetylome and propionylome in MRSA. Comparative analyses revealed unique PTM dynamics showing that acylation regulated a wide range of cellular functions, including metabolism, antibiotic resistance, virulence, and stress response. This work establishes the first antibody-free enrichment method for defining bacterial acylomes and provides new insight into global lysine acylation networks in pathogenic bacteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Metal–Organic Frameworks for Per- and Polyfluoroalkyl Substances Treatment in Contaminated Water

Per- and polyfluoroalkyl substances (PFAS) are synthetic pollutants known for their chemical stability, environmental persistence, and toxicological risks. Their widespread use has led to extensive contamination, particularly in aquatic systems. Conventional treatment methods often face challenges such as high energy consumption and the production of secondary pollutants. Metal− organic frameworks (MOFs), with their high surface areas and tunable structures, have emerged as promising materials for PFAS remediation. This review summarizes recent progress in MOF-based PFAS adsorption and degradation, highlighting key frameworks such as MIL, UiO, and ZIF. Mechanistic insights into adsorption behavior and regeneration capabilities are discussed, along with the catalytic performance of MOF composites and postmodified systems in degradation pathways. The review concludes with design strategies for next-generation MOF materials aimed at efficient, sustainable PFAS removal under realistic conditions.

Adsorption↗
DOE OSTI2022

Photoluminescence Induced by Substitutional Nitrogen in Single-Layer Tungsten Disulfide

The electronic and optical properties of two-dimensional materials can be strongly influenced by defects, some of which can find significant implementations, such as controllable doping, prolonged valley lifetime, and single-photon emissions. Here, we demonstrate that defects created by remote N 2 plasma exposure in single-layer WS 2 can induce a distinct low-energy photoluminescence (PL) peak at 1.59 eV, which is in sharp contrast to that caused by remote Ar plasma. This PL peak has a critical requirement on the N 2 plasma exposure dose, which is strongest for WS 2 with about 2.0% sulfur deficiencies (including substitutions and vacancies) and vanishes at 5.6% or higher sulfur deficiencies. Both experiments and first-principles calculations suggest that this 1.59 eV PL peak is caused by defects related to the sulfur substitutions by nitrogen, even though low-temperature PL measurements also reveal that not all the sulfur vacancies are remedied by the substitutional nitrogen. The distinct low-energy PL peak suggests that the substitutional nitrogen defect in single-layer WS 2 can potentially serve as an isolated artificial atom for creating single-photon emitters, and its intensity can also be used to monitor the doping concentrations of substitutional nitrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗