SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This study aimed to identify high-risk factors for regional recurrence in patients with breast cancer with pathologically negative lymph nodes.
Randomized clinical trials have shown that regional nodal irradiation (RNI) in patients with unselected N1 breast cancer improves breast cancer-specific survival. However, the benefit of RNI in women with biologically low-risk N1 breast cancer is uncertain. We conducted a population-based study to determine whether RNI is associated with improved breast cancer recurrence-free interval (BCRFI) in this population.
With recent developments in computational techniques, Data-driven Machine Learning Models (DMLs) have shown great potential in simulating streamflow and capturing the rainfall-runoff relationship in given watersheds, which are traditionally fulfilled by Process-based Hydrologic Models (PHMs). There are debates on whether the DMLs can outperform and possibly replace the classical PHMs for streamflow simulation and river forecasting, but no clear conclusions have been made. This study aims to investigate whether the newer DMLs have any potential in further improving the simulation accuracy of classical PHMs, and vice versa. To do this, we compared a few popular PHMs and DMLs over four watersheds across the Continental US (CONUS) that are associated with different input, climate, and regional conditions. A total of five hydrologic models were chosen, including (1) two classical lumped models, i.e., the Sacramento Soil Moisture Accounting (SAC-SMA) and Xinanjiang (XAJ); (2) one modern distributed model, termed Coupled Routing and Excess Storage (CREST); (3) and two DMLs including an Artificial Neural Networks (ANN) and a deep learning model, termed Long Short Term Memory (LSTM). Our results demonstrated that the DMLs still significantly biased when using the baseline input scenario with the PHMs. However, the DMLs fed with delayed input scenarios had great potential and can reach high simulation accuracy. The DMLs, especially the ANN, outperformed other employed models under the rainfall-runoff relationship in which rainfall dominantly drives. Furthermore, the DMLs also showed better performance in the high-flow regime, while the PHMs had a better performance for the low-flow regime, implying both PHMs and DMLs have their own merits and are worthy of joint development. In general, our study indicated a great potential of using DMLs to simulate streamflow, but further studies are still needed to verify the transferability and scalability of DMLs in large-scale experiments, such as the Distributed Model Intercomparison Projects 1&2 conducted by National Weather Services but to compare modern DMLs and PHMs.
In recent years, the Artificial Intelligence and Data Mining (AI&DM) models have become popular tools in assisting various aspects of reservoir operation. However, the practical uses are still rarely reported. Comparison experiment of many AI&DM models over a large number of reservoir cases is particularly valuable to help reservoir operators first examine the usefulness and transferability of different AI&DM models, and then identify the most stable and reliable AI&DM model in assist of various decision-making processes. In this study, a total of 12 AI&DM models with different parameterizations and simulation scenarios are comprehensively tested out and compared in simulating the controlled reservoir outflows of 33 reservoir cases over the Upper Colorado Region, United States. Results show that the Random Forecast and the Long-Short-Term-Memory model could consistently derive the best statistical performance than other models under the baseline simulation scenario. The employed AI&DM models could obtain satisfactory statistical interquartile ranges (25–75%) between [0.6–0.9], [0.3–0.8], and [0.2–0.8], for CORR, NSE, and KGE measurements, respectively, and [1.5–6.5], [–15 to 20], and [0.5–8.5] for the normalized RMSE, PBIAS and RSR measurements, respectively. Results also show Multi-Layer Perceptron model and Extreme Gradient Boosting Tree Algorithm produced more stable and superior performance than other models under more complex input scenarios. We also found that the performance of different AI&DM models are closely relevant to the reservoir elevations, sizes, and functionalities. Discussions were made about the sensitivity of AI&DM models’ parameterizations and the key advantages of AI&DM models over the rule-based reservoir models. We further identify that the main advantage of AI&DM models is the flexibility in designing input structures, whereas the rule-based simulation model is rather limited. Future studies were suggested regarding the best way reservoir operators and researchers could use, select, and apply different AI&DM models in simulating reservoir releases under different natural and modeling environments. Finally, this comparison study also serves as a reference and a piece of groundwork for further promoting the practical uses of AI&DM models in assisting reservoir operation.
Reliable precipitation estimates are crucial for planning and managing water resources, monitoring hydrologic extremes, and fulfilling irrigation water requirements. Accurate precipitation estimates are particularly challenging in complex mountain terrains, where monitoring gauges are often sparsely distributed due to their remote locations, and high installation and long-term operation costs. Recent advances in satellite-based precipitation estimates offer promising opportunities to improve our understanding of hydrologic processes and their applications for irrigation water management. Several datasets are available varying considerably in terms of their data sources, quality control methods, estimation procedure, and spatiotemporal resolutions. Choosing the most suitable dataset for a particular application is a complex task. In this study, we (1) evaluate the performance of six satellite-based precipitation estimates (SPEs): i) CHIRPS v2.0, ii) CMORPH v1.0, iii) ERA5, iv) IMERG v6, v) MSWEP v2.8, and vi) PERSIANN-CDR against the gauge precipitation using continuous statistical and categorical indices, (2) integrate SPEs with a calibrated semi-distributed hydrologic model to predict streamflow, and (3) demonstrate practical implications of improved streamflow prediction for irrigation water management in the central Himalayan region, Nepal. Our results illustrate that satellite-based precipitation estimates have competitive performance in capturing a wide range of rainfall characteristics, with demonstrated variability across river basins and time scales. Further, there are no significant discrepancies observed in satellite-based precipitation estimates for estimating irrigation water requirements for the three major crops (maize, wheat, and paddy) during the cropping period across the selected river basins, showing a greater promise for irrigation water management planning and decision making.
Intrinsically disordered proteins/regions (IDPRs) are a very large and functionally important class of proteins that participate in weak multivalent interactions in protein complexes. They are recalcitrant for interrogations using X-ray crystallography and cryo-EM. The IDPRs observed at the interface of the photosynthetic pigment protein complexes (PPCs) remain much less clear, e.g., the major cyanobacterial light-harvesting complex (PBS) contains an unstructured PB-loop insertion in the phycocyanobilin domain (PB domain) of ApcE (the largest polypeptide in PBS). Here, a joint platform is built to probe such structural domains. This platform is characterized by two-round progressive justifications of in silico models by using the structural mass spectrometry data. First, the AlphaFold-generated 3D structure of the PB domain (containing PB-loop) was justified in the context of PBS. Second, docking the AlphaFold-generated ApcG (a ligand) into the first-step justified structure (a receptor). The final ligand-receptor complex was then subjected to a second-round justification, again, by using unequivocal isotopically-encoded cross-links identified in LC-MS/MS. This work reveals a full-length PB-loop structure modelled in the PBS basal cylinder, free from any spatial conflicts against the other subunits in PBS. The structure of PB domain highlights the close associations of the intrinsically disordered PB-loop with its binding partners in PBS, including ApcG, another IDPR. The PB-loop region involved in the binding of photosystem II (PSII) is also discussed in the context of excitation energy transfer regulation. Finally, this work calls attention to the highly disordered, yet interrogatable interface between the light-harvesting antenna complexes and the reaction centers.
In this work, we carried out a large-scale molecular dynamics (MD) simulation to elucidate the effect of the free surface on the defect production of displacement cascades in pure nickel. These MD simulations were performed both in the bulk and near-surface regions with primary knock-on atom (PKA) energies of E PKA = 1, 5, or 10 keV and at temperatures T = 300, 425, or 525 K. Additionally, for every (T, E PKA ), near-surface cascade simulations were performed as a function of depth. In the near-surface simulations, assuming isotropic neutron fluence, the PKAs were initiated in random directions, including toward and parallel to the free surface. For both the near-surface and bulk cascades, the effect of E PKA and T on the defect production is similar. In both cases, the defect production increases with E PKA , but the temperature has minimal effect. However, the production and clustering of vacancies are higher for near-surface cascades, and they decrease with increasing depth. In contrast, the production and clustering of self-interstitial atoms are lower and increase with depth. Eventually, the production and clustering of both defect types approach bulk cascade-like behavior, and the depth at which this occurs increases with E PKA , but is independent of temperature.
Metallic fuels comprised of U-Zr binary and U-Pu-Zr ternary alloys are a promising fuel candidate for sodium-cooled fast reactors and possess many advantages over ceramic fuels such as higher uranium density and improved thermal conductivity. Fluff is a highly porous structure forming at the top of metallic fuel slugs during irradiation and was extensively observed in past sodium-cooled fast reactor (SFR) experiments such as Idaho National Laboratory’s Experimental Breeder Reactor II (EBR-II). Previous investigations have shown that fluff is rich in fissile atoms and hence could have neutronics implications, but its formation mechanisms are not understood. In this work, two cube-shaped lift outs were taken from the fluff and bulk fuel regions of a high burnup U-19Pu-10Zr composition EBR-II fuel slug and characterized by micro computed tomography (Micro-CT) and energy dispersive x-ray spectroscopy (EDS). This was used to characterize differences in microscale porosity and composition between fluff and bulk fuel, and to support or oppose postulated fluff formation mechanisms. Surface EDS showed minimal differences between the elemental compositions of the fluff and fuel cubes. However, three-dimensional (3D) pore analysis from the tomography scans showed significant differences between the fluff and fuel cube pore size distributions at the microscale level. The high porosity and irregular pore distribution seen in macroscale fluff was also present within the micro-scale fluff cube, having a much higher porosity than the fuel cube which was concentrated in a few large pore networks. In conclusion, these results indicate support for a creep driven mechanism of fluff formation.
The dual-phase xenon time projection chamber (TPC) is a powerful tool for direct-detection experiments searching for WIMP dark matter, other dark matter models, and neutrinoless double-beta decay. Successful operation of such a TPC is critically dependent on the ability to hold high electric fields in the bulk liquid, across the liquid surface, and in the gas. Careful design and construction of the electrodes used to establish these fields is therefore required. We present the design and production of the LUX-ZEPLIN (LZ) experiment's high-voltage electrodes, a set of four woven mesh wire grids. Grid design drivers are discussed, with emphasis placed on design of the electron extraction region. Here, we follow this with a description of the grid production process and a discussion of steps taken to validate the LZ grids prior to integration into the TPC.
The FCC-ee offers the potential to measure the electron Yukawa coupling via direct s-channel Higgs production, e + e − → H , at a centre-of-mass (CM) energy of ∼125 GeV. This measurement is significantly facilitated if the CM energy spread of e + e − collisions can be reduced to a level comparable to the natural width of the Higgs boson, Γ H = 4.1 MeV, without substantial loss in luminosity. Achieving this reduction in collision-energy spread is possible through the “monochromatization” concept. The basic idea is to create opposite correlations between spatial position and energy deviation within the colliding beams, which can be accomplished in beam optics by introducing a nonzero dispersion function with opposite signs for the two beams at the interaction point. Since the first proposal in 2016, the implementation of monochromatization at the FCC-ee has been continuously improved, starting from preliminary parametric studies. In this paper, we present a detailed study of the interaction region optics design for this newly proposed collision mode, exploring different potential configurations and their implementation in the FCC-ee global lattice, along with beam dynamics simulations and performance evaluations including the impact of “beamstrahlung.”
Here, the original article Zhang et al. (2025) can be logically divided into two parts: (1) the selection of main parameters for monochromatization and (2) interaction region optics design; the comment pertains only to the first part. The authors of Zhang et al. (2025) state that “The purpose of this paper is to report on the development of realistic IR optics designs for monochromatization at the FCC-ee”. However, the proposed parameters do not seem very realistic and raise many questions; due to space limitations, we will only consider the most important ones.
We performed a refined analysis of the data collected with the CHIMERA detector with the aim of searching rare 3-$α$ decay modes near the Hoyle state of 12 C. In particular we investigated the direct and sequential decay modes of the Hoyle state including also the recently suggested Efimov state. The comparison of selected events with simulations constrains the precision achievable with measurements in different experimental conditions. We observe good sensitivities to different decay scenarios also in the CHIMERA spherical region notwithstanding its limited angular resolution. Furthermore, the search for the decay of the Efimov state in 12 C was performed by using new selection strategies as suggested by simulations. The obtained results are not conclusive, however, we are able to exclude the presence of a sequential decay of this state, while our data could be compatible with its direct decay.
High-momentum configurations of nucleon pairs at short-distance are probed using measurements of the $^{12}$C$(e,e'p)$ and $^{12}$C$(e,e'pN)$ reactions (where $N$ is either $n$ or $p$), at high-$Q^2$ and $x_B>1.1$. The data span a missing-momentum range of 300--1000 MeV/c and are predominantly sensitive to the transition region of the strong nuclear interaction from a Tensor to Scalar interaction. The data are well reproduced by theoretical calculations using the Generalized Contact Formalism with both chiral and phenomenological nucleon-nucleon ($NN$) interaction models. This agreement suggests that the measured high missing-momentum protons up to $1000$ MeV/c predominantly belong to short-ranged correlated (SRC) pairs. The measured $^{12}$C$(e,e'pN)$ / $^{12}$C$(e,e'p)$ and $^{12}$C$(e,e'pp)$ / $^{12}$C$(e,e'pn)$ cross-section ratios are consistent with a decrease in the fraction of proton-neutron SRC pairs and increase in the fraction of proton-proton SRC pairs with increasing missing momentum. This confirms the transition from an isospin-dependent tensor $NN$ interaction at $\sim 400$ MeV/c to an isospin-independent scalar interaction at high-momentum around $\sim 800$ MeV/c as predicted by theoretical calculation.
We report on the measurements of the double-spin asymmetry from electron- 3 He scattering in the threshold region of two- and three-body breakup of 3 He for 4-momentum transfer values of 0.1 and 0.2 (GeV/c) 2 . The measurement was done at Jefferson Lab using a polarized 3 He target with its spin aligned parallel to the beam direction. This asymmetry is sensitive to a combination of spin-dependent response functions not previously measured and may highlight differences in two body forces, meson-exchange currents and final-state interactions. The results of this measurement serve as a test of our understanding of few-body systems. When compared with calculations from plane wave impulse approximation and Faddeev calculations, we found that the latter, which use modern nuclear potentials and prescriptions for meson-exchange currents, demonstrate an overall good agreement with data.
Ozone pollution is one of the most severe air quality issues in China that poses a serious threat to human health and ecosystems. During 2019–2021, the maximum daily 8-h average ozone concentrations in eastern China (110–122.5°E, 26–42°N) and the rest of China (ROC) show different decreasing patterns, with ozone concentrations in eastern China decreasing by 14.9 μg/m 3 , which is much larger than 4.8 μg/m 3 in ROC. Here, based on two independent methods, the atmospheric chemical transport model (GEOS-Chem) simulations and the machine learning (ML) model (LightGBM) predictions, the reasons for the differences in ozone changes between eastern China and ROC during the warm season (April to September) are investigated. According to the GEOS-Chem (LightGBM) results, changes in the meteorological conditions contributed to an ozone decrease by 7.3 (6.8) μg/m 3 in eastern China due to decreased chemical production and an ozone decrease by 6.8 (7.0) μg/m 3 in ROC attributed to the weakened horizontal and vertical advection. With the influence of meteorological factors excluded, the observations show that changes in anthropogenic emissions resulted in an ozone decrease by 7.6 (8.1) μg/m 3 in eastern China and an ozone increase by 2.0 (2.2) μg/m 3 in ROC, which is primarily induced by the changes in NO x emissions. The surface measurements and satellite retrievals also indicate that the reduction in NO x emissions in ROC is less efficient than that in the more developed eastern China, leading to contrasting changes in ozone concentrations between eastern China and ROC during 2019–2021. In conclusion, our results highlight the critical need to reduce ozone precursor emissions in the rest regions of China apart from eastern China.
In this paper, we develop a optimal transmission switching (OTS) heuristic based on DC optimal power flow (OPF) and assess the efficacy of the approach when implemented within AC OPF. Traditional formulations of the OTS problem can result in hundreds or thousands of binary variables for large networks, making the OTS problem challenging to solve on fast timescales even for relatively small networks. Here, we identify which constraints and therefore which variables are constraining the DC OPF feasible region, and rank them based on their impact on the cost function. We develop a heuristic algorithm which iteratively removes these constraints and solves a series of standard DC OPF problems. The heuristic is tested on a variety of PGlib networks and the results show that the algorithm can provide substantial cost decreases without having to solve any mixed integer programs. Additionally, we provide insights about the OTS problem, including identifying scenarios outside congestion where OTS can prove useful. Lastly, the performance of the DC-based heuristic is shown when the line switching decisions are implemented within AC OPF.
Controlled Environment Agriculture (CEA) offers high-yield, climate-resilient food production, but high energy and resource demands challenge its sustainability. This paper synthesizes technologies that can improve outcomes across six categories—energy, CO 2 utilization, building envelope, hardware, water, and process—plus colocation strategies. We evaluate 80 technologies and define ten implementation pathways bundling complementary technologies to reduce energy use, optimize water consumption, and minimize emissions. Regional application is demonstrated through five U.S. case studies spanning different climates. A logic framework guides pathway selection for case studies based on climate, infrastructure, and regulatory context, informing context-sensitive technology deployment. Results show energy intensity reductions of 3–55 %, ranging from energy management programs to comprehensive lighting retrofits; water savings of 20–40 % through closed-loop recirculation; and emissions reductions of 3–100 %, with strategic energy management achieving 3–5 % and renewable electricity paired with electrified heating achieving up to 100 %. Text mining revealed that energy, hardware, and process technologies account for 91 % of literature coverage. Water, building envelope, and CO 2 utilization remain underexplored, indicating priorities for future research. This integrative approach to technology assessment supports growers, developers, and policymakers in aligning CEA system design with local conditions, improving resource efficiency and addressing gaps in cross-domain technology coverage.
Gram-positive bacteria use type VII secretion systems (T7SSs) to export effector proteins that manipulate the physiology of nearby prokaryotic and eukaryotic cells. Several mycobacterial T7SSs have established roles in virulence. By contrast, the genetically distinct T7SSb pathway found in Firmicutes bacteria more often functions to mediate bacterial competition. A lack of structural information on the T7SSb has limited the understanding of effector export by this protein secretion apparatus. Here, we present the 2.4 angstrom crystal structure of the extracellular region of the T7SSb subunit EsaA from Streptococcus gallolyticus. Our structure reveals that homodimeric EsaA is an elongated, arrow-shaped protein with a surface-accessible "tip", which in some species of bacteria serves as a receptor for lytic bacteriophages. Because it is the only T7SSb subunit large enough to traverse the peptidoglycan layer of Firmicutes, we propose that EsaA plays a critical role in transporting effectors across the entirety of the Gram-positive cell envelope.