Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Interactive effects of salinity, redox, and colloids on greenhouse gas production and carbon mobility in coastal wetland soils

Coastal wetlands, including freshwater systems near large lakes, rapidly bury carbon, but less is known about how they transport carbon either to marine and lake environments or to the atmosphere as greenhouse gases (GHGs) such as carbon dioxide and methane. This study examines how GHG production and organic matter (OM) mobility in coastal wetland soils vary with the availability of oxygen and other terminal electron acceptors. We also evaluated how OM and redox-sensitive species varied across different size fractions: particulates (0.45–1μm), fine colloids (0.1–0.45μm), and nano particulates plus truly soluble (<0.1μm; NP+S) during 21-day aerobic and anaerobic slurry incubations. Soils were collected from the center of a freshwater coastal wetland (FW-C) in Lake Erie, the upland-wetland edge of the same wetland (FW-E), and the center of a saline coastal wetland (SW-C) in the Pacific Northwest, USA. Anaerobic methane production for FW-E soils were 47 and 27,537 times greater than FW-C and SW-C soils, respectively. High Fe 2+ and dissolved sulfate concentrations in FW-C and SW-C soils suggest that iron and/or sulfate reduction inhibited methanogenesis. Aerobic CO 2 production was highest for both freshwater soils, which had a higher proportion of OM in the NP+S fraction (64±28% and 70±10% for FW-C and FW-E, respectively) and organic C:N ratios reflective of microbial detritus (5.3±5.3 and 5.3±7.0 for FW-E and FW-C, respectively) compared to SW-C, which had a higher fraction of particulate (58±9%) and fine colloidal (19±7%) OM and organic C:N ratios reflective of vegetation detritus (11.4 ± 1.7). The variability in GHG production and shifts in OM size fractionation and composition observed across freshwater and saline soils collected within individual and across different sites reinforce the high spatial variability in the processes controlling OM stability, mobility, and bioavailability in coastal wetland soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Theoretical Investigation of Solvent Effects on the Hydrodeoxygenation of Propionic Acid over a Ni(111) Catalyst Model

The effect of two solvents, liquid water and 1,4-dioxane, has been studied from first principles on the hydrodeoxygenation of propionic acid over a Ni (111) catalyst surface model. A mean-field microkinetic model was developed to investigate these effects at a temperature of 473 K. Under all reaction conditions, a decarbonylation mechanism is favored significantly over a decarboxylation pathway. Although no significant solvent effects were observed on the decarbonylation rate, a substantial solvent stabilization of two key surface intermediates in the decarboxylation mechanism, CH 3 CCOO and CH 3 CHCOO, lead to a notable increase of the decarboxylation rate by two orders of magnitude in liquid water and by one order of magnitude in liquid 1,4-dioxane. Furthermore, a significant solvent stabilization of the transition state of C-H bond cleavage of the α-carbon of CH 3 CHCO, relative to the stabilization of the C-C bond cleavage of the α-carbon of CH 3 CHCO, leads to a change in dominant pathway in the liquid phase environments. Finally, a sensitivity analysis shows that the C-OH bond cleavage of propionic acid and C-C bond cleavage of the α-carbon of CH 3 CHCO are the most rate controlling states in the gas phase. In contrast, in solvents the dehydrogenation of CH 3 CHCO becomes the most influential step. This shift in rate controlling state is attributed to the solvent effect on the dehydrogenation of CH 3 CHCO, which is facilitated in aqueous phase. Altogether, it is likely that the investigated (111) facet of Ni is not active for the hydrodeoxygenation of propionic acid in neither the gas nor liquid phase and other Ni facets or phases must be responsible for the experimentally observed kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Incorporation of Ion Transport Chains into Multivariate MOF for Improved Water Oxidation

The climate crisis demands clean energy technologies to cut CO 2 emissions from fossil fuels. Hydrogen fuel cells and solar-driven CO 2 reduction are promising, but both rely on efficient water oxidation. Polypyridyl ruthenium complexes are active catalysts for water oxidation; however, they exhibit poor stability and recyclability. Our group improved performance by embedding these complexes into metal−organic frameworks (MOFs). As water oxidation is pH-dependent, proton management further enhances reactivity. To address the issue, we introduced proton transfer pathways into the MOF structure. Specifically, we incorporated −SO 3 H groups onto the biphenyl linkers of UiO-67 loaded with [Ru(tpy)(dcbpy)OH 2 ]PF 6 catalyst (where tpy = 2,2′:6′,2″-terpyridine; dcbpy = 5,5-dicarboxy-2,2′- bipyridine). The sulfonated MOF exhibited a 2.5-fold increase in oxygen evolution compared to the nonsulfonated analogue. After 1 h of electrolysis, the sulfonated MOF exhibited a turnover number of 25 for oxygen evolution reaction compared to 10 for the native MOF, demonstrating the benefits of built-in proton management.

Catalysts↗
DOE OSTI2025

Surface Manipulation on Pt 2.2 Ni(111) Nanocatalysts for Boosting Their ORR Performance in Alkaline Media

We have previously shown that Pt–Ni alloy nano-octahedra with {111} facets exhibit outstanding electrochemical performance in the oxygen reduction reaction (ORR) in acidic media when their surfaces are finely tailored at the atomic level. Here, in this investigation, we further refine the surface structure of Pt 2.2 Ni octahedral nanocatalysts to improve ORR performance in a 0.1 M KOH solution using diverse surface manipulation techniques. Through systematic analysis using electrochemical CO stripping, cyclic voltammetry, and X-ray photoelectron spectroscopy, we examined the surfaces of Pt 2.2 Ni octahedral nanocatalysts pretreated with various methods, including etching in acetic acid or perchloric acid, and subsequent electrochemical activation in an alkaline solution or an acidic solution. Among these treatments, those involving acidic media, particularly electrochemical cycling in acidic electrolytes, demonstrated significantly enhanced ORR activity in 0.1 M KOH. The latter exhibited a mass activity of 2.95 A/mg pt and a specific activity of 8.71 mA/cm 2 at 0.90 V, surpassing state-of-the-art Pt/C by 12-fold and 34-fold, respectively. Furthermore, this identified nanocatalyst displayed robust stability, with negligible activity decay observed after 10,000 cycles. This study suggests that the improved ORR activity can be attributed to the Pt-rich surfaces with well-preserved {111} lattices on the surface-modified Pt–Ni nano-octahedra.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nitrogenated Graphene Quantum Dot-Derived Copper Single-Atom Catalyst for Oxygen Reduction Reaction

Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catalysts were synthesized via simple pyrolysis of pyrene-derived amine-terminated graphene quantum dots (GQDs) in the presence of nitrogen and metal precursors. The abundant nitrogen functionality in GQDs effectively stabilized isolated Cu atoms during their conversion to porous carbon. A subsequent acid-washing step yielded a high density of atomically dispersed Cu active sites. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning transmission electron microscopy (HR-STEM) confirmed the effective incorporation of isolated Cu atoms into the carbon matrix through copper–nitrogen (Cu-N) coordination. Electrochemical measurements revealed excellent ORR activity with a dominant four-electron pathway. This synthetic strategy provides a practical route to developing economically viable, non-precious metal catalysts.

catalysts↗
DOE OSTI2023

Defect Quantification in Metal Halide Perovskites Anticipates Photoluminescence and Photovoltaic Performance

Semiconductor material optimization requires quantification of performance and stability-dependent near-valence maximum and near-conduction minimum defects with sufficient energy resolution and sensitivity. In this work, we utilize a spectroscopy-electrochemistry approach to resolve the energy-distinct donor and acceptor defect concentrations in wide-gap (Cs .05 FA .79 MA .16 )Pb(I .87 Br .13 ) 3 perovskites, benchmarked against photoluminescence and photovoltaic device performance. Monitoring charge transfer events to electron acceptor and donor molecules within solid electrolyte top contacts enables defect quantification below 10 15 cm –3 at an energy resolution of 10 meV under device-relevant bias, well below levels reported by other methods. Further method sensitivity is demonstrated for defects arising from <2% formamidinium concentration modifications, mimicking compositional imperfections resulting from nonoptimized processing. This method provides the first complete perovskite energetic diagrams with small changes in composition, is nondestructive, compatible with in-line processing characterization, and will enable the semiconductor community to link molecular origins of defects with limitations in device performance across a wide array of optoelectronic platforms.

14 SOLAR ENERGY↗
DOE OSTI2023

p -Azaquinodimethane: A Versatile Quinoidal Moiety for Functional Materials Discovery

The past 50 years of discovery in organic electronics have been driven in large part by the donor–acceptor design principle, wherein electron-rich and electron-poor units are assembled in conjugation with each other to produce small band gap materials. While the utility of this design strategy is undoubtable, it has been largely exhausted as a frontier of new avenues to produce and tune novel functional materials to meet the needs of the ever-increasing world of organic electronics applications. Its sister strategy of joining quinoidal and aromatic groups in conjugation has, by comparison, received much less attention, to a great extent due to the categorically poor stability of quinoidal conjugated motifs. In 2017 though, the p-azaquinodimethane (AQM) motif was first unveiled, which showed a remarkable level of stability despite being a close structural analogue to p-quinodimethane, a notably reactive compound. In contrast, dialkoxy AQM small molecules and polymers are stable even under harsh conditions and could thus be incorporated into conjugated polymers. When polymerized with aromatic subunits, these AQM-based polymers show notably reduced band gaps that follow reversed structure–property trends to some of their donor–acceptor polymer counterparts and yield organic field-effect transistor (OFET) hole mobilities above 5 cm 2 V –1 s –1 . Additionally, in an ongoing study, these AQM-based compounds are also showing promise as singlet fission (SF) active materials due to their mild diradicaloid character. An expanded world of AQMs was accessed through their ditriflate derivatives, which were first used to produce ionic AQMs (iAQMs) sporting two directly attached cationic groups that significantly affect the AQM motif’s electronics, producing strongly electron-withdrawing quinoidal building blocks. Conjugated polyelectrolytes (CPEs) created with these iAQM building blocks exhibit optical band gaps stretching into the near-infrared I (NIR-I) region and showed exemplary behavior as photothermal therapy agents. In contrast to these stable AQM examples, the synthetic exploration of AQMs also produced examples of more typical diradicaloid reactivity but in forms that were controllable and produced intriguing and high-value products. With certain substitution patterns, AQMs were found to dimerize to form highly substituted [2.2]paracyclophanes in distinctly more appreciable yields than typical cyclophane formation reactions. Certain AQM ditriflates, when crystallized, undergo light-induced topochemical polymerization to form ultrahigh molecular weight (>10 6 Da) polymers that showed excellent performances as dielectric energy storage materials. These same AQM ditriflates could be used to produce the strongly electron-donating redox-active pentacyclic structure: pyrazino[2,3-b:5,6-b']diindolizine (PDIz). Importantly, the PDIz motif allowed for the synthesis of exceedingly small band gap (0.7 eV) polymers with absorbances reaching all the way into the NIR-II region that were also found to produce strong photothermal effects. Both as stable quinoidal building blocks and through their controllable diradicaloid reactivity, AQMs have already proven to be versatile and effective as functional organic electronics materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fuel Properties of Oxymethylene Ethers with Terminating Groups from Methyl to Butyl

Oxymethylene ethers (OMEs) have been studied as possible additives or replacements for diesel fuels. Typically, studies have considered only methyl-terminated OMEs. Recent structure-property relationship models suggest that extended-alkyl OMEs may provide improvements to many of the properties of methyl-terminated OMEs that make them less suitable as diesel fuel blendstocks. In this work, we describe the synthesis and characterization of 16 different OMEs with methyl, ethyl, propyl, butyl, isopropyl, and isobutyl terminating alkyl groups with varying oxymethylene chain length. Indicated Cetane Number, Lower Heating Value, Flash Point, Density, Viscosity, Vapor Pressure, and Oxidative Stability are tested via ASTM standard methods. Additionally, Water Solubility, Boiling Point, seal material compatibility, and sooting propensity (via the Yield Sooting Index) are measured for these fuels. For diesel compatibility, all tested OMEs except smaller methyl and ethyl OMEs, and the branched isopropyl OME, meet cetane number requirements. Further, extending the alkyl end group increases the heating value, but all OMEs, due to their oxygen content, have heating values less than diesel; despite this, all OMEs show significant reductions in soot production per unit heating value. Only the heaviest OMEs meet diesel viscosity requirements, and most are higher density than diesel. OMEs with larger alkyl groups show the highest stability under accelerated auto-oxidation conditions. Increases in alkyl group length cause order of magnitude reduction in water solubility, from hundreds of g/L for methyl terminated OMEs to hundreds of mg/L for butyl terminated OMEs. Limited seal material testing indicates that PEEK polymers are unaffected by OMEs; while extended alkyl groups may improve compatibility with FKM (Viton), other common elastomers (NBR, silicone) remain incompatible with all tested OMEs. Overall, it is found that methyl-terminated OMEs exhibit the most potential for soot reduction, but OMEs with larger propyl and butyl terminating alkyl groups show improved compatibility with existing diesel systems.

09 BIOMASS FUELS↗
DOE OSTI2022

Solid-phase Mn speciation in suspended particles along meltwater-influenced fjords of West Greenland

Manganese (Mn) is an essential micro-nutrient that can limit or, along with iron (Fe), co-limit phytoplankton growth in the ocean. Glacier meltwater is thought to be a key source of trace metals to high latitude coastal systems, but little is known about the nature of Mn delivered to glacially-influenced fjords and adjacent coastal waters. In this work, we combine in-situ dissolved Mn (dMn) measurements of surface waters with Mn K-edge X-ray absorption spectroscopy (XAS) data of suspended particles in four fjords of West Greenland. Data were collected from transects of up to 100 km in fjords with different underlying bedrock geology from 64 to 70°N. We found that dMn concentrations generally decreased conservatively with increasing salinity (from 80 to 120 nM at salinity < 8 to < 40 nM at salinities > 25). Dissolved Fe (dFe) trends in these fjords similarly declined with increasing distance from glacier outflows (declining from > 20 nM to < 8 nM). However, the dMn/dFe ratio increased rapidly likely due to the greater stability of dMn at intermediate salinities (i.e. 10–20) compared to rapid precipitation of dFe across the salinity gradient. The XAS data indicated a widespread presence of Mn(II)-rich suspended particles near fjord surfaces, with structures akin to Mn(II)-bearing phyllosilicates. However, a distinct increase in Mn oxidation state with depth and the predominance of birnessite-like Mn(IV) oxides was observed for suspended particles in a fjord with tertiary basalt geology. The similar dMn behaviour in fjords with different suspended particle Mn speciation (i.e., Mn(II)-bearing phyllosilicates and Mn(IV)-rich birnessite) is consistent with the decoupling of dissolved and particulate Mn and suggests that dMn concentrations on the scale of these fjords are controlled primarily by dilution of a freshwater dMn source rather than exchange between dissolved and particle phases. This work provides new insights into the Mn cycle in high latitude coastal waters, where small changes in the relative availabilities of dMn, dFe and macronutrients may affect the identity of the nutrient(s) proximally limiting primary production.

58 GEOSCIENCES↗
DOE OSTI2026

4-Electron Oxygen Reduction Reaction (ORR) with Iron Phthalocyanine (FePc) Functionalized Nanowire Templated-3D Fuzzy Graphene (NT-3DFG)

Iron phthalocyanine (FePc) is a promising alternative to platinum-based catalysts for sustainable energy devices; however, the plane-symmetry of Fe-N 4 sites, random aggregation, and poor conductivity of FePc present major barriers for their application as oxygen reduction reaction (ORR) electrocatalysts. Here, we report the synergistic effects of FePc electrocatalysts supported by a nanowire-templated three-dimensional fuzzy graphene (FePc@NT-3DFG) substrate. The in situ functionalized oxygen groups (iFOGs) at the edge of NT-3DFG localize Fe active sites in FePc under alkaline ORR conditions. With a uniform FePc distribution through many single layers of graphene, the NT-3DFG substrates improve O 2 adsorption and catalytic activity while stabilizing the electrochemical activity during reactions. The FePc@NT-3DFG catalyst exhibits fast ORR kinetics with an extremely low Tafel slope of 28.3 ± 2.7 mV dec −1 , a higher half-wave potential of 0.911 ± 0.004 V (vs RHE), and notable long-term stability at 0.5 V (vs RHE) of 96.0 ± 0.4% retention after 30 h. Surface chemistry spectra validate electronic configuration modification of Fe at the iFOGs. Density functional theory calculations indicate that the extra layers of graphene improve oxygen adsorption. Moreover, additional exploration of other transition metal phthalocyanines supports the effects of iFOGs through the transition toward 4e − ORR. This work offers an expanded strategy for active site modification through edge-based graphene substrates for 4e − ORR.

X-ray absorption spectroscopy↗
DOE OSTI2024

Atomically Dispersed Zn/Co–N–C as ORR Electrocatalysts for Alkaline Fuel Cells

Hydrogen fuel cells have drawn increasing attention as one of the most promising next-generation power sources for future automotive transportation. Developing efficient, durable, and low-cost electrocatalysts, to accelerate the sluggish oxygen reduction reaction (ORR) kinetics, is urgently needed to advance fuel cell technologies. Herein, we report on metal–organic frameworks-derived nonprecious dual metal single-atom catalysts (SACs) (Zn/Co–N–C), consisting of Co–N 4 and Zn–N 4 local structures. These catalysts exhibited superior ORR activity with a half-wave potential (E 1/2 ) of 0.938 V versus RHE (reversible hydrogen electrode) and robust stability (ΔE 1/2 = –8.5 mV) after 50k electrochemical cycles. Moreover, this remarkable performance was validated under realistic fuel cell working conditions, achieving a record-high peak power density of ~1 W cm –2 among the reported SACs for alkaline fuel cells. Operando X-ray absorption spectroscopy was conducted to identify the active sites and reveal catalytic mechanistic insights. The results indicated that the Co atom in the Co–N 4 structure was the main catalytically active center, where one axial oxygenated species binds to form an O ads –Co–N 4 moiety during the ORR. In addition, theoretical studies, based on a potential-dependent microkinetic model and core-level shift calculations, showed good agreement with the experimental results and provided insights into the bonding of oxygen species on Co–N 4 centers during the ORR. Furthermore, this work provides a comprehensive mechanistic understanding of the active sites in the Zn/Co–N–C catalysts and will pave the way for the future design and advancement of high-performance single-site electrocatalysts for fuel cells and other energy applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Stabilizing Ru-Formyl CO 2 Reduction Intermediates by Formation of Lewis Acid–Base Adducts: A Combined 2DIR and NMR Study

This work demonstrates how the stability of a Ru(II) formyl complex (cis-[Ru(bpy) 2 (CO)(CHO)][PF 6 ]), which is known to decarbonylate to form the metal hydride complex, is greatly enhanced by the addition of a Lewis acidic cation (Li + or Mg 2+ ). Multinuclear NMR is used to measure equilibrium constants of adduct formation, and then ultrafast 2DIR spectroscopy is applied to determine how the electronic structure and local molecular dynamics change upon complexation of the formyl ligand with the Lewis acid. We attribute the stabilization of the complex to the formation of a carbene-like structure where the bond strength between the Ru and the formyl group increases. The change in electronic structure is evidenced by steady-state NMR spectroscopy and DFT calculations. 2DIR measurements further confirm both the complexation of the formyl ligand with the Lewis acid and the change in electronic structure, where changes in vibrational frequency, relaxation kinetics, and a slowdown in the time scale of rotation about the metal-formyl bond are observed in the presence of Lewis acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd–Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd 5 Bi 2 and conventional face-centered cubic (fcc) structured Pd 3 Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd 5 Bi 2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg Pd . After 10,000 cycles of ORR durability test, the monoclinic structured Pd 5 Bi 2 /C nanocatalysts still remain a MA of 1.52 A/mg Pd , which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd 3 Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd 5 Bi 2 /C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. Overall, this work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating

While lithium, manganese-rich (LMR) layered oxide cathode materials offer high energy density (>900 Wh kg –1 ) and low cost, LMR is susceptible to continuous capacity and voltage decay from the oxygen migration and side reaction with aqueous electrolyte at high voltage. Herein, the integration of Na/F co-doping (CD) and AlF 3 coating on LMR is achieved without the need of complex atomic layer deposition. Akin to pristine and CD samples, CD with 1 wt % AlF 3 (CD-1.0 wt %) shows excellent electrochemical performance with the capacity and voltage retentions of 93 and 91% after 150 cycles at 0.5C, respectively, and increased ionic conductivity. Spectroscopic analysis indicates that the coating mainly influences the Co distribution, where Co is enriched on the surface, and partial diffusion of Al 3+ ions toward the bulk, leading to a slight change of transition-metal (TM) valence states at the nanometer scale and the formation of a stable Li x (CoAl)O y phase. Post-cycling analysis reveals that CD-1.0 wt % can alleviate the formation of rock-salt structure and Mn dissolution. Besides, little to no metal segregation is detected for the cycled CD-1.0 wt % sample. This finding presents the first instance to apply co-doping and AlF 3 coating as a new strategy to enhance the structural homogeneity and takes another step toward their commercial viability.

25 ENERGY STORAGE↗
DOE OSTI2026

Mechanistic Insights into Dinitrogen Reduction to Ammonia in Light-Controlled Nanocrystal:Nitrogenase Complexes

Developing systems that can efficiently capture photon energy and convert this energy into fuels and chemicals requires understanding how to assemble molecular components with diverse functions into complete systems possessing selectivity and efficiency in directing charge carriers to catalytic reactions. There are many challenges to achieving this goal. One promising approach is the development of hybrid systems that combine semiconductor nanocrystals (NCs) for light capture and enzymes as efficient catalysts. Such biohybrid systems capitalize on the tunable electronic and optical properties of NCs while leveraging the unmatched specificity and efficiency of enzymes in catalyzing chemical reactions, thereby offering opportunities to surpass the limitations of each component alone. Here, we focus on recent progress in developing a biohybrid system that combines CdS NCs for photon capture with the enzyme nitrogenase to accomplish light-driven dinitrogen (N 2 ) reduction to ammonia (NH 3 ). Integrating light-harvesting materials with biological catalysts requires a deep understanding of NC properties, protein stability, and electron transfer (ET), making it an inherently multidisciplinary problem. The reduction of N 2 to NH 3 is a challenging reaction, with a high demand in both agriculture and industrial chemical production. This reaction is intrinsically energy intensive, due to the need to activate the N≡N triple bond. The current standard industrial approach to N 2 reduction, the Haber−Bosch reaction, obtains the necessary energy input from fossil fuels, whereas biological systems capable of N 2 reduction utilize the hydrolysis of ATP as their energy source. Replacing these costly, energy-intensive inputs with renewable light energy represents a critical step toward sustainable NH 3 production. Recent progress has demonstrated that semiconductor CdS NCs can be coupled to the catalytic component of nitrogenase, the MoFe protein, to form a biohybrid CdS NC:MoFe protein complex, enabling light-driven N 2 reduction rather than energy input from fossil fuels or ATP. This illustrates how inorganic NCs can functionally replace the natural Fe protein partner, yielding a biohybrid catalyst that enables controlled electron delivery and provides not only light-driven NH 3 production but also new approaches for probing enzyme catalytic function. The CdS NC:MoFe protein biohybrid system enables light-initiated electron delivery at ambient temperature, as well as temperatures below freezing, allowing for stabilization and spectroscopic characterization of key reaction intermediates. These findings highlight how photochemical biohybrids can serve as both functional catalysts and mechanistic probes. Beyond studies of the nitrogenase mechanism, studies of the CdS NC:MoFe system reveal how variables such as NC size, electrostatic binding interactions, and sacrificial electron donors (SEDs) govern complex stability, charge transfer efficiency, and catalytic performance. In addition, studies of nitrogenase and the high activation barrier for N 2 reduction are enabling investigations of new and interesting questions regarding the properties and limitations of NC biocatalysis. In this Account, we describe the key features of CdS NC:MoFe protein biohybrids and the parameters for optimal light-driven N 2 reduction, and how controlling ET with light illuminates the path to new insights into the nitrogenase mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bifunctional Electrocatalysts with High-Entropy Alloys: Bridging Hydrogen Evolution and Oxygen Reduction

High-entropy alloys (HEAs) have emerged as a promising class of bifunctional electrocatalysts capable of simultaneously driving the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) with high activity and durability. Their near-equiatomic multicomponent compositions give rise to unique physicochemical characteristics, including lattice distortion, sluggish diffusion, high-entropy stabilization, and pronounced electronic heterogeneity, that collectively generate diverse and synergistic active sites inaccessible in conventional alloys. This review summarizes recent progress in HEA-based bifunctional electrocatalysis, with a focus on the fundamental mechanisms governing HER and ORR activity, stability, and selectivity. We discuss advances in synthesis strategies, ranging from confined growth and step-alloying to scalable continuous-flow methods, that enable precise control over composition, size, and surface structure. Complementary computational and data-driven approaches, including density functional theory, machine-learning-assisted screening, and descriptor development, are highlighted as essential tools for navigating the vast HEA design space and establishing structure−property relationships. Particular attention is paid to adsorption-energy distributions, multisite cooperativity, and environmental effects under realistic electrochemical conditions. Finally, we outline current challenges and future opportunities for integrating mechanistic understanding with AI-guided, closed-loop design frameworks to accelerate the discovery of next-generation HEA bifunctional electrocatalysts for sustainable energy conversion.

Alloys↗
DOE OSTI2024

M IV /Co –I (M = Zr, Hf) Bis(phosphinoamide) Complexes with η 6 - and η 4 -Arenes

Despite their relevance to catalysis, low-/subvalent cobalt complexes are difficult to synthesize and isolate. Consequently, very few “cobaltate” complexes are known and there is a lack of architectural diversity in this field. Lewis acidic d 0 group IV metals have been demonstrated to stabilize Co –I centers via metal–metal bonds. Herein, we report the synthesis of bis(phosphinoamide) heterobimetallic M IV /Co –I arene complexes (M = Zr, Hf). The driving force to maintain the aromaticity of the arenes dictates the hapticity of the Co-bound arene ligands and influences the binding arrangement of the phosphinoamide ligands. Benzene and toluene were observed to bind η 6 to the Co –I center, forcing dissociation of one of the phosphinoamide ligands, whereas η 4 -coordination of anthracene allows both phosphinoamide ligands to remain bound to the Co center. The identity of both the arene and the group IV metal ion starkly influence the lability of the arene. For instance, the Co-bound benzene ligand in the Zr IV /Co –I benzene complex rapidly exchanges with C 6 D 6 in solution, whereas toluene/C 6 D 6 exchange is much slower and appreciable C 6 H 6 /C 6 D 6 exchange is not observed for the Hf analogue. The Zr IV /Co –I benzene complex loses benzene upon repeated exposure to vacuum to form an arene-free tetrametallic dimer.

aromatic compounds↗
DOE OSTI2024

Microbial Proxies for Anoxic Microsites Vary with Management and Partially Explain Soil Carbon Concentration

Anoxic microsites are potentially important but unresolved contributors to soil organic carbon (C) storage. How anoxic microsites vary with soil management and the degree to which anoxic microsites contribute to soil C stabilization remain unknown. Sampling from four long-term agricultural experiments in the central United States, we examined how anoxic microsites varied with management (e.g., cultivation, tillage, and manure amendments) and whether anoxic microsites determine soil C concentration in surface (0–15 cm) soils. We used a novel approach to track anaerobe habitat space and, hence, anoxic microsites using DNA copies of anaerobic functional genes over a confined volume of soil. No-till practices inconsistently increased anoxic microsite extent compared to conventionally tilled soils, and within one site organic matter amendments increased anaerobe abundance in no-till soils. Across all long-term tillage trials, uncultivated soils had ~2–4 times more copies of anaerobic functional genes than their cropland counterparts. Finally, anaerobe abundance was positively correlated to soil C concentration. Even when accounting for other soil C protection mechanisms, anaerobe abundance, our proxy for anoxic microsites, explained 41% of the variance and 5% of the unique variance in soil C concentration in cropland soils, making anoxic microsites the strongest management-responsive predictor of soil C concentration. Our results suggest that careful management of anoxic microsites may be a promising strategy to increase soil C storage within agricultural soils.

54 ENVIRONMENTAL SCIENCES↗