Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “random sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Statistical Properties of SGR J1550-5418 Bursts

Magnetars are slowly rotating neutron stars with extreme magnetic fields, over 10(exp 15) Gauss. Only few have been discovered in the last 30 years. These sources are dormant most of their lifetimes and become randomly active emitting multiple soft gamma-ray bursts. We present here our results on the temporal analysis of ~300 bursts from Soft Gamma Repeater SGR J1550-5418 recorded with the Gamma-ray Burst Monitor (GBM) onboard the Fermi Observatory during its activation on January 22-29, 2009. We employed an un-triggered burst search in the energy range 8-100keV to collect all events from the source, besides the ones that triggered GBM. For the entire sample of bursts we determined their durations, rise and decay times. We study here the statistical properties of these characteristics and discuss how these may help us better understand the physical characteristics of the magnetar model.

Gorgone, Nicholas M.↗
NASA NTRS1974

Micrometeoroid abrasion of lunar rocks - A Monte Carlo simulation

A Monte Carlo computer model simulating the randomness of the impact process both in space and in time is developed in order to provide insight into lunar rock erosion by single particle abrasion and into bombardment history of fractional surface areas of lunar rocks. Microcrater frequencies derived from lunar rocks are used to calculate magnitude and probability of each cratering event, and experimental cratering results are employed to determine the eroded volumina for individual crater sizes. It is shown that a fractional surface area of a lunar rock sample may have a completely different bombardment history, and that the exposure histories and actual erosion depths of the surfaces vary accordingly and are highly heterogeneous. A minimum erosion rate of 0.3 to 0.6 mm for the past one million years is obtained.

Hoerz, F.↗
NASA NTRS2001

Detached Bridgman Growth of Germanium and Germanium-Silicon Alloy Crystals

Earth based experiments on the science of detached crystal growth are being conducted on germanium and germanium-silicon alloys (2at% Si average composition) in preparation for a series of experiments aboard the International Space Station (ISS) to differentiate among proposed mechanisms contributing to detachment. Sessile drop measurements were first carried out for a large number of substrates made of potential ampoule materials to determine the contact angles and the surface tension as a function of temperature and composition. The process atmosphere and duration of the experiment (for some cases) were also found to have significant influence on the wetting angle. Growth experiments have used pyrolytic boron nitride (pBN) and fused silica ampoules with the majority of the detached results occurring predictably in the pBN. The contact angles were 173 deg (Ge) and 165 deg (GeSi) for pBN. For fused silica, the contact angle decreases to an equilibrium value with duration of measurement ranging from 150 to 117 deg (Ge), 129 to 100 deg (GeSi). Forming gas (Ar + 2% H2) and vacuum have been used in the growth ampoules. With gas in the ampoule, a variation of the temperature profile during growth has been used to control the pressure difference between the top of the melt and the volume below the melt caused by detachment of the growing crystal. The stability of detachment has been modeled and substantial insight has been gained into the reasons that detachment has most often been observed in reduced gravity but nonetheless has occurred randomly even there. An empirical model for the conditions necessary to achieve sufficient stability to maintain detached growth for extended periods has been developed and will be presented. Methods for determining the nature and extent of detachment include profilometry and optical and electron microscopy. This surface study is the subject of another presentation at this Congress. Results in this presentation will show that we have established the effects of different ampoule materials, temperature profiles, pressure differences, and silicon concentrations and that samples that are nearly completely detached can be grown repeatedly.

Szofran, F. R.↗
NASA NTRS1983

Unsteady behavior of a reattaching shear layer

A detailed investigation of the unsteadiness in a reattaching, turbulent shear layer is reported. Laser-Doppler velocimeter measurements were conditionally sampled on the basis of instantaneous flow direction near reattachment. Conditions of abnormally short reattachment and abnormally long reattachment were considered. Ensemble-averaging of measurements made during these conditions was used to obtain mean velocities and Rreynolds stresses. In the mean flow, conditional streamlines show a global change in flow pattern which correlates with wall-flow direction. This motion can loosely be described as a 'flapping' of the shear layer. Tuft probes show that the flow direction reversals occur quite randomly and are shortlived. Streses shown also vary with the change in flow pattern. Yet, the global'flapping' motion does not appear to contribute significantly to the stress in the flow. A second type of unsteady motion was identified. Spectral analysis of both wall static pressure and streamwise velocity shows that most of the energy in the flow resides in frequencies that are significantly lower than that of the turbulence. The dominant frequency is at a Strouhal number equal to 0.2, which is the characteristic frequency of roll-up and pairing of vortical structure seen in free shear layers. It is conjectured that the 'flapping' is a disorder of the roll-up and pairing process occurring in the shear layer.

Driver, D. M.↗
NASA NTRS1992

Large-scale structure in the Southern Sky Redshift Survey

The power spectrum from the Southern Sky Redshift Survey and the CfA samples are measured in order to explore the amplitude of fluctuation in the galaxy density. At lambda of less than or equal to 30/h Mpc the observed power spectrum is quite consistent with the standard CDM model. At larger scales the data indicate an excess of power over the standard CDM model. The observed power spectrum from these optical galaxy samples is in good agreement with that drawn from the sparsely sampled IRAS galaxies. The shape of the power spectrum is also studied by examining the relation between the genus per unit volume and the smoothing length. It is found that, over Gaussian smoothing scales from 6 to 14/h Mpc, the power spectrum has a slope of about -1. The topology of the galaxy density field is studied by measuring the shift of the genus curve from the Gaussian case. Over all smoothing scales studied, the observed genus curves are consistent with a random phase distribution of the galaxy density field, as predicted by the inflationary scenarios.

Park, Changbom↗
NASA NTRS1989

Report on the multicolor pyrometry session at the Second NASA Non-Contact Temperature-Measurement Workshop

The session met jointly with the other special sessions. Due to time constraints, the concerns of multicolor pyrometry were not addressed in depth. Multicolor pyrometry attempts to determine an object's temperature and emittance as a function of wavelength from simultaneous measurement of the spectral radiance of the object at multiple wavelengths. The main issues are those of the most appropriate model for the wavelength dependence of the emittance, the number of undetermined parameters, and the error in the measured temperature. It has long been known that it is inappropriate to attempt to model the emittance with a functional form that contains as many unknowns as wavelengths. Such attempts will lead to gross errors in the measured temperature. However, more recent work by Hunter and Khan has indicated that emittance can be modeled by a function with many fewer degrees of freedom than sampled wavelengths (e.g., it may be appropriate to use a second order polynomial to fit data from a forty-color pyrometer). In a platform lecture, Khan described algorithms for determination of the parameters by minimization of the errors between the model and the data in a least-squares sense. The first was a linear method and the second was a non-linear method where the emittance could assume any functional form. Both methods were shown to be very sensitive to random noise and non-linearity in the measurement system.

Spjut, R. Erik↗
NASA NTRS1991

Additions to Mars Global Reference Atmospheric Model (Mars-GRAM)

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification has also been made which allows heights to go below local terrain height and return realistic pressure, density, and temperature (not the surface values) as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local valley areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch version of Mars-GRAM are presented.

Justus, C. G.↗
NASA NTRS1992

Additions to Mars Global Reference Atmospheric Model (MARS-GRAM)

Three major additions or modifications were made to the Mars Global Reference Atmospheric Model (Mars-GRAM): (1) in addition to the interactive version, a new batch version is available, which uses NAMELIST input, and is completely modular, so that the main driver program can easily be replaced by any calling program, such as a trajectory simulation program; (2) both the interactive and batch versions now have an option for treating local-scale dust storm effects, rather than just the global-scale dust storms in the original Mars-GRAM; and (3) the Zurek wave perturbation model was added, to simulate the effects of tidal perturbations, in addition to the random (mountain wave) perturbation model of the original Mars-GRAM. A minor modification was also made which allows heights to go 'below' local terrain height and return 'realistic' pressure, density, and temperature, and not the surface values, as returned by the original Mars-GRAM. This feature will allow simulations of Mars rover paths which might go into local 'valley' areas which lie below the average height of the present, rather coarse-resolution, terrain height data used by Mars-GRAM. Sample input and output of both the interactive and batch versions of Mars-GRAM are presented.

Justus, C. G.↗
NASA NTRS1991

Analysis of delay reducing and fuel saving sequencing and spacing algorithms for arrival traffic

The air traffic control subsystem that performs sequencing and spacing is discussed. The function of the sequencing and spacing algorithms is to automatically plan the most efficient landing order and to assign optimally spaced landing times to all arrivals. Several algorithms are described and their statistical performance is examined. Sequencing brings order to an arrival sequence for aircraft. First-come-first-served sequencing (FCFS) establishes a fair order, based on estimated times of arrival, and determines proper separations. Because of the randomness of the arriving traffic, gaps will remain in the sequence of aircraft. Delays are reduced by time-advancing the leading aircraft of each group while still preserving the FCFS order. Tightly spaced groups of aircraft remain with a mix of heavy and large aircraft. Spacing requirements differ for different types of aircraft trailing each other. Traffic is reordered slightly to take advantage of this spacing criterion, thus shortening the groups and reducing average delays. For heavy traffic, delays for different traffic samples vary widely, even when the same set of statistical parameters is used to produce each sample. This report supersedes NASA TM-102795 on the same subject. It includes a new method of time-advance as well as an efficient method of sequencing and spacing for two dependent runways.

Neuman, Frank↗
NASA NTRS1996

Gravitational Effects on Closed-Cellular-Foam Microstructure

Polyurethane foam has been produced in low gravity for the first time. The cause and distribution of different void or pore sizes are elucidated from direct comparison of unit-gravity and low-gravity samples. Low gravity is found to increase the pore roundness by 17% and reduce the void size by 50%. The standard deviation for pores becomes narrower (a more homogeneous foam is produced) in low gravity. Both a Gaussian and a Weibull model fail to describe the statistical distribution of void areas, and hence the governing dynamics do not combine small voids in either a uniform or a dependent fashion to make larger voids. Instead, the void areas follow an exponential law, which effectively randomizes the production of void sizes in a nondependent fashion consistent more with single nucleation than with multiple or combining events.

Noever, David A.↗
NASA NTRS2002

A simple way to measure daily lifestyle regularity

A brief diary instrument to quantify daily lifestyle regularity (SRM-5) is developed and compared with a much longer version of the instrument (SRM-17) described and used previously. Three studies are described. In Study 1, SRM-17 scores (2 weeks) were collected from a total of 293 healthy control subjects (both genders) aged between 19 and 92 years. Five items (1) Get out of bed, (2) First contact with another person, (3) Start work, housework or volunteer activities, (4) Have dinner, and (5) Go to bed were then selected from the 17 items and SRM-5 scores calculated as if these five items were the only ones collected. Comparisons were made with SRM-17 scores from the same subject-weeks, looking at correlations between the two SRM measures, and the effects of age and gender on lifestyle regularity as measured by the two instruments. In Study 2 this process was repeated in a group of 27 subjects who were in remission from unipolar depression after treatment with psychotherapy and who completed SRM-17 for at least 20 successive weeks. SRM-5 and SRM-17 scores were then correlated within an individual using time as the random variable, allowing an indication of how successful SRM-5 was in tracking changes in lifestyle regularity (within an individual) over time. In Study 3 an SRM-5 diary instrument was administered to 101 healthy control subjects (both genders, aged 20-59 years) for two successive weeks to obtain normative measures and to test for correlations with age and morningness. Measures of lifestyle regularity from SRM-5 correlated quite well (about 0.8) with those from SRM-17 both between subjects, and within-subjects over time. As a detector of irregularity as defined by SRM-17, the SRM-5 instrument showed acceptable values of kappa (0.69), sensitivity (74%) and specificity (95%). There were, however, differences in mean level, with SRM-5 scores being about 0.9 units [about one standard deviation (SD)] above SRM-17 scores from the same subject-weeks. SRM-5 scores also deviated more from a Gaussian distribution than did SRM-17 ones. In a study with a sample size of 101, the new SRM-5 instrument yielded scores with a mean of 4.11 and an SD of 1.13. Correlations between lifestyle regularity and age, and between lifestyle regularity and morningness appeared similar whether 5-item or 17-item SRM measures were used. When a gender difference in lifestyle regularity appeared, it was detected by both SRM-5 and SRM-17 measures.

Non-NASA Center↗
NASA NTRS1983

The environment of D and cD galaxies

The Dressler (1980) morphological sample of galaxies in clusters is used in an investigation of bright galaxy spatial distribution, which has established that such galaxies with luminous extended halos as the D or cD lie on significant cluster galaxy distribution peaks irrespective of whether they are the brightest cluster member. The mean distance of bright D and cD galaxies from local density peaks is of the order of their halo scales, and the positions of bright galaxies of other morphological types are consistent with their being drawn at random from each morphological population. It is noted that local density peaks with associated d ocD galaxies have a mean density 2-3 times greater than peaks without a D or cD.

Beers, T. C.↗
NASA NTRS1991

Monte Carlo simulation of launchsite winds at Kennedy Space Center

This paper develops and validates an easily implemented model for simulating random horizontal wind profiles over the Kennedy Space Center (KSC) at Cape Canaveral, Florida. The model is intended for use in Monte Carlo launch vehicle simulations of the type employed in mission planning, where the large number of profiles needed for statistical fidelity of such simulation experiments makes the use of actual wind measurements impractical. The model is based on measurements made at KSC and represents vertical correlations by a decaying exponential model which is parameterized via least-squares parameter optimization against the sample data. The validity of the model is evaluated by comparing two Monte Carlo simulations of an asymmetric, heavy-lift launch vehicle. In the first simulation, the measured wind profiles are used, while in the second, the wind profiles are generated using the stochastic model. The simulations indicate that the use of either the measured or simulated wind field results in similar launch vehicle performance.

Queen, Eric M.↗
NASA NTRS1992

The kinematics of intermediate-redshift gaseous galaxy halos

High-resolution spectroscopy of the absorption lines associated with four intermediate-redshift galaxies are presented. These observations are combined with existing spectroscopy of the redshifted 21-cm absorption lines toward 0235 + 164 and 1229 - 021. Evidence is presented to the effect that the lines of sight through the absorbers toward 0235 + 164 and 1229 - 021 penetrate material for which the velocity fields are dominated by systematic rather than by random motions, and the line profiles are found to be consistent with what is expected for rotating ensembles of clouds. It is suggested that for these two absorbers the absorption arises in individual clouds within single galaxy halos rather than, for example, in collections of coalescing subgalactic fragments, for which the expected velocity fields are more turbulent, or as a result of galaxy-galaxy clustering. It is concluded that lines of sight that impact absorbing regions at small impact parameters intercept many clouds, sample large velocity intervals, and are likely to show redshifted 21-cm absorption, whereas lines of sight that impact absorbing regions at large impact parameters intercept few clouds, sample small velocity intervals, and are unlikely to show redshifted 21-cm absorption.

Lanzetta, Kenneth M.↗
NASA NTRS2009

Metal Decorated Multi-Walled Carbon Nanotube/Polyimide Composites with High Dielectric Constants and Low Loss Factors

The measurement of observable electromagnetic phenomena in materials and their derived intrinsic electrical material properties are of prime importance in the discovery and development of material systems for electronic and aerospace applications. Nanocomposite materials comprised of metal decorated multi-walled carbon nanotubes (MWCNTs) were prepared by a facile method and characterized. Metal particles such as silver(Ag), platinum(Pt) and palladium(Pd) with diameters ranging from less than 5 to over 50 nanometers were distributed randomly on the MWCNTs. The present study is focused on silver decorated MWCNTs dispersed in a polyimide matrix. The Ag-containing MWCNTs were melt mixed into Ultem(TradeMark) and the mixture extruded as ribbons. The extruded ribbons exhibited a moderate to high degree of MWCNT alignment as determined by HRSEM. These ribbons were then fabricated into test specimens while maintaining MWCNT alignment and subsequently characterized for electrical and electromagnetic properties at 8-12 GHz. The results of the electromagnetic characterization showed that certain sample configurations exhibited a decoupling of the permittivity (epsilon ) and loss factor (epsilon") indicating that these properties could be tailored within certain limits. The decoupling and independent control of these fundamental electrical material parameters offers a new class of materials with potential applications in electronics, microwave engineering and optics.

Elliott, Holly A.↗
NASA NTRS1990

Analysis of sequencing and scheduling methods for arrival traffic

The air traffic control subsystem that performs scheduling is discussed. The function of the scheduling algorithms is to plan automatically the most efficient landing order and to assign optimally spaced landing times to all arrivals. Several important scheduling algorithms are described and the statistical performance of the scheduling algorithms is examined. Scheduling brings order to an arrival sequence for aircraft. First-come-first-served scheduling (FCFS) establishes a fair order, based on estimated times of arrival, and determines proper separations. Because of the randomness of the traffic, gaps will remain in the scheduled sequence of aircraft. These gaps are filled, or partially filled, by time-advancing the leading aircraft after a gap while still preserving the FCFS order. Tightly scheduled groups of aircraft remain with a mix of heavy and large aircraft. Separation requirements differ for different types of aircraft trailing each other. Advantage is taken of this fact through mild reordering of the traffic, thus shortening the groups and reducing average delays. Actual delays for different samples with the same statistical parameters vary widely, especially for heavy traffic.

Neuman, Frank↗
NASA NTRS2009

Metal Decorated Multi-Walled Carbon Nanotube/Polyimide Composites with High Dielectric Constants and Low Loss Factors

The measurement of observable electromagnetic phenomena in materials and their derived intrinsic electric material properties are of prime importance in the discovery and development of material systems for electronic and aerospace applications. Nanocomposite materials comprised of metal decorated multi-walled carbon nanotubes (MWCNTs) were prepared by a facile method and characterized. Metal particles such as silver, platinum and palladium with diameters ranging from less than 5 to over 50 nanometers were distributed randomly on the MWCNTs. The metal-containing MWCNTs were then melt mixed into a polymer matrix and the mixture extruded as ribbons. These extruded ribbons exhibited a moderate to high degree of MWCNT alignment as determined by HRSEM. These ribbons were then fabricated into test specimens while maintaining MWCNT alignment and subsequently characterized for electromagnetic properties at 8-12 GHz. The present study is focused on silver decorated MWCNTs dispersed in an Ultem polyimide matrix. The results of the electromagnetic characterization showed that certain sample configurations exhibited a decoupling of the permittivity and loss factor (?? and ??) indicating that these properties could be tailored within certain limits. The decoupling and independent control of these fundamental electrical material parameters offer a new class of materials with potential applications in electronics, microwave engineering and optics.

Ghose, Sayata↗
NASA NTRS1992

A search for microvariability in five OVV quasars

We present results of monitoring a sample of five OVV qausars in an effort to determine if these types of AGNs exhibit microvariability similar to that detected for BL Lacertae objects. Three of the five quasars investigated clearly exhibited microvariability. The timescales for the variations for both BL Lacertae objects and OVV quasars are similar which suggests that the radiation is generated in similar spatial volumes. These variations are consistent with the results of models which explain the observed microvariability as the result of excess emission produced by flares or hot spots randomly appearing and disappearing on the accretion disks around supermassive black holes.

Miller, H. R.↗