Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “project formulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

A simple hydrologically based model of land surface water and energy fluxes for general circulation models

A generalization of the single soil layer variable infiltration capacity (VIC) land surface hydrological model previously implemented in the Geophysical Fluid Dynamics Laboratory (GFDL) general circulation model (GCM) is described. The new model is comprised of a two-layer characterization of the soil column, and uses an aerodynamic representation of the latent and sensible heat fluxes at the land surface. The infiltration algorithm for the upper layer is essentially the same as for the single layer VIC model, while the lower layer drainage formulation is of the form previously implemented in the Max-Planck-Institut GCM. The model partitions the area of interest (e.g., grid cell) into multiple land surface cover types; for each land cover type the fraction of roots in the upper and lower zone is specified. Evapotranspiration consists of three components: canopy evaporation, evaporation from bare soils, and transpiration, which is represented using a canopy and architectural resistance formulation. Once the latent heat flux has been computed, the surface energy balance is iterated to solve for the land surface temperature at each time step. The model was tested using long-term hydrologic and climatological data for Kings Creek, Kansas to estimate and validate the hydrological parameters, and surface flux data from three First International Satellite Land Surface Climatology Project Field Experiment (FIFE) intensive field campaigns in the summer-fall of 1987 to validate the surface energy fluxes.

Liang, XU↗
NASA NTRS1999

Interchange for Joint Research Entitled: Miniature Laser Spectrometer for Stable Isotope Measurements

As a first step in successfully measuring carbon isotopes optically we have previously demonstrated the measurement of C-13/C-12 to a precision of 0.1% using a tunable diode laser and CO2 spectral lines in the 2300/cm spectral region. This precision of 0.1% (1 per mil) for carbon isotopes is a value sufficiently precise to provide important isotopic data of interest to astrobiologists. The precision presently attainable in gases is sufficient to permit our instrument to be used in the measurement of isotopic ratios of interest to astrobiologists as well as geologists and planetary scientists. A small stable isotope laser spectrometer with a 10 cm path gas cell was designed and constructed. The cell was integrated with a liquid nitrogen cooled tunable diode laser and indium antimonide detector for evaluation. Using the small gas cell, preliminary measurements of 13C/12C in CO2 were made employing single-beam sequential acquisitions of the required spectral data. The results indicate an accuracy of 0.1% which is sufficiently high to make meaningful measurements of martian samples. In addition, improvements in the spectrometer gas handling system have been made to markedly reduce C-13/C-12 isotopic fractionation during sample gas cell loading which we expect will lead to further improvements in precision and accuracy. An important part of making isotopic ratio measurements in solid samples using diode lasers is the conversion of the elements of interest to molecules that have absorption spectra in the mid-ir spectral range accessible by tunable diode lasers. In this project we have investigated the necessary sample preparation procedures to extract carbon, an element of astrobiological importance, from model soil compounds and to convert it to CO2, a molecule with appropriate optical absorption characteristics for reliable laser spectrometer isotopic ratio measurements of 13C/12C. We have considered calcium carbonate as a model for a component of the martian regolith, and we have formulated a simple heating protocol for extracting carbon in the form of CO2.

Becker, J. F.↗
DOE OSTI2020

Rapid data-driven model reduction of nonlinear dynamical systems including chemical reaction networks using ℓ 1 -regularization

We develop a new data-driven paradigm for efficient model reduction of a broad class of nonlinear dynamical systems. Our model reduction method directly enables the interpretation of key components of the dynamical system, unlike traditional projection-based model reduction methods that focus on reducing computational complexity more than interpretability. Our method is not application specific and is simple to implement on nonlinear dynamical systems arising from a variety of different fields. It requires minimal parameterization using a single parameter to trade-off between model complexity and estimation error. We use a data-driven paradigm to formulate model reduction as an efficient convex optimization problem that scales polynomially in the original size of the complex system, enabling systems with as many as thousands of components to be reduced in a matter of minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

hashin_shtrikman_mp: a package for the optimal design and discovery of multi-phase composite materials

hashin_shtrikman_mp is a tool for composites designers who have desired composite properties in mind, but who do not yet have an underlying formulation. The library utilizes the tightest theoretical bounds on the effective properties of composite materials with unspecified microstructure – the Hashin-Shtrikman bounds – to identify candidate theoretical materials, find real materials that are close to the candidates, and determine the optimal volume fractions for each of the constituents in the resulting composite. Its features include (i) leveraging of materials in the Materials Project database, (ii) integration with the Materials Project API, (iii) use of genetic machine-learning, (iv) agnosticism to underlying microstructure, and (v) ultimate engineering application, make it a tool with much broader applications than its predecessors.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1993

Analysis of the anisotropic viscoplastic-damage response of composite laminates - Continuum basis and computational algorithms

The mathematical structure underlying the rate equations of a recently-developed constitutive model for the coupled viscoplastic-damage response of anisotropic composites is critically examined. In this regard, a number of tensor projection operators have been identified, and their properties were exploited to enable the development of a general computational framework for their numerical implementation using the Euler fully-implicit integration method. In particular, this facilitated (i) the derivation of explicit expressions of the (consistent) material tangent stiffnesses that are valid for both three-dimensional as well as subspace (e.g. plane stress) formulations, (ii) the implications of the symmetry or unsymmetry properties of these tangent operators from a thermodynamic standpoint, and (iii) the development of an effective time-step control strategy to ensure accuracy and convergence of the solution. In addition, the special limiting case of inviscid elastoplasticity is treated. The results of several numerical simulations are given to demonstrate the effectiveness of the schemes developed.

Saleeb, A. F.↗
NASA NTRS2009

Heavy Lift for National Security: The Ares V

The NASA Ares Projects Office is developing the launch vehicles to move the United States and humanity beyond low earth orbit. Ares I is a crewed vehicle, and Ares V is a heavy lift vehicle being designed to launch cargo into LEO and transfer cargo and crews to the Moon. This is a snapshot of development and capabilities. Ares V is early in the requirements formulation stage of development pending the outcome of the Review of U.S. Human Space Flight Plans Committee and White House action. The Ares V vehicle will be considered a national asset, creating unmatched opportunities for human exploration, science, national security, and space business.

Sumrall, Phil↗
NASA NTRS2014

Design and Development of Aerogel-Based Antennas for Aerospace Applications: A Final Report to the NARI Seedling

As highly porous solids possessing low density and low dielectric permittivity combined with good mechanical properties, polyimide (PI) aerogels offer great promise as an enabling technology for lightweight aircraft antenna systems. While they have been aggressively explored for thermal insulation, barely any effort has been made to leverage these materials for antennas or other applications that take advantage of their aforementioned attributes. In Phase I of the NARI Seedling Project, we fabricated PI aerogels with properties tailored to enable new antenna concepts with performance characteristics (wide bandwidth and high gain) and material properties (low density, environmental stability, and robustness) superior to the state of practice (SOP). We characterized electromagnetic properties, including permittivity, reflectivity, and propagation losses for the aerogels. Simple, prototype planar printed circuit patch antennas from down-selected aerogel formulations were fabricated by molding the aerogels to net shapes and by gold-metalizing the pattern onto the templates via electron beam evaporation in a clean room environment. These aerogel based antennas were benchmarked against current antenna SOP, and exhibited both broader bandwidth and comparable or higher gain performance at appreciably lower mass. Phase II focused on the success of the Phase I results pushing the PI aerogel based antenna technology further by exploring alternative antenna design (i.e., slot coupled antennas) and by examining other techniques for fabricating the antennas including ink jet printing with the goal of optimizing antenna performance and simplifying production. We also examined new aerogel formulations with better moisture and solvent resistance to survive processing conditions. In addition, we investigated more complex antenna designs including passive phased arrays such as 2x4 and 4x8 element arrays to assess the scalability of the aerogel antenna concept. Furthermore, we explored the possibility of developing these arrays in thin, flexible form to make conformable antennas.

insulation↗
DOE OSTI2025

Zwitterionic Photocurable Resin for High‐Resolution 3D Printing of Ultralow‐Fouling Microstructures

High‐resolution 3D printing technologies are enabling a new generation of microstructured materials for applications where biocompatibility is critical. However, most conventional 3D‐printable resins yield materials that exhibit trade‐offs between antifouling properties and mechanical robustness, limiting their applicability in living systems. In nature, zwitterionic surface groups form tightly bound hydration layers that act as effective barriers against protein and cell attachment. Inspired by this strategy, a zwitterionic acrylamide‐based photoresist—carboxybetaine di‐methacrylamide (CBDA)—is developed for projection‐based vat photopolymerization, enabling the fabrication of complex microarchitectures with exceptional antifouling properties. The bifunctional monomer allows the formation of dense, cross‐linked networks that resist swelling while maintaining a high density of zwitterionic groups. Printed structures exhibit strong resistance to protein and cell adhesion, as confirmed by porcine blood assays, alongside robust mechanical performance. As a demonstration, a tubular structure featuring a negative Poisson's ratio lattice is printed to showcase structural fidelity and versatility. This resin formulation offers a broadly applicable strategy for fabricating microscale devices and surfaces where antifouling performance and structural integrity are both essential—spanning biomedical interfaces, soft robotics, and beyond.

3D printing↗
DOE OSTI2022

Advanced Integrated Reticular Sorbent-Coated System to Capture CO 2 from the Atmosphere (AIR2CO2)

GE Research Center (GRC) and the University of California, Berkeley (UCB) executed an 15-month, $1.0 MM program to develop a lab-scale material system to extract CO 2 from ambient air using UCB’s pioneering sorbent technology and GRC’s composite coating expertise. The primary objective of this project was to develop an “Advanced Integrated Reticular Sorbent-Coated System to Capture CO 2 from the Atmosphere (AIR2CO2)” at a Technology Readiness Level (TRL) of 3. The AIR2CO2 concept relies on two key innovations: 1) advanced sorbent architectures with high capacity and rapid sorption kinetics that enable effective CO 2 capture at low concentrations, and 2) tailored MOF-binder slurry formulations and coating processes that enable sorbent integration into a novel additively-manufactured contactor.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Potential Impacts of High-Octane Fuel Introduction in a Naturally Aspirated, Port Fuel-Injected Legacy Vehicle

In recent years there has been an increased interest in raising the octane level of gasoline to enable higher compression ratios (CR) in spark-ignition engines to improve vehicle fuel efficiency. A number of studies have examined opportunities to increase efficiency in future vehicles, but potential impacts on the legacy fleet have not received as much attention. In this study, our effort focused on experimental studies on an engine using high-octane fuels without changing the engine’s CR. Spark timing was advanced until maximum torque was reached or knock was encountered for each engine condition, using each individual fuel to maximize engine efficiency. Knock-limited conditions occurred as the output brake mean effective pressure (BMEP) neared the maximum attainable output at a given engine speed. Increasing research octane numbers generally enabled knock-free operation under a greater number of operating conditions. Vehicle modeling using Autonomie was used to project vehicle energy use, fuel economy, and tailpipe CO 2 emissions for the Urban Dynamometer Driving Schedule (UDDS), the Highway Fuel Economy Test (HWFET), and the US06 cycle. Results show that decreases in energy consumption of up to 2% for a small SUV are possible through the use of a 97 RON fuel compared to a baseline using 91 RON fuel, provided that the formulation of the fuel does not cause unanticipated operational issues such as lower maximum BMEP. Greater improvements using high-octane fuels are possible if the CR is increased, but there is no opportunity to increase the CR in legacy vehicles. Thus, these vehicles realize an improvement from increased octane rating in accordance with their ability to spark advance to take advantage of a fuel with a higher octane rating. For the modeled vehicle, improvements of up to 2% in volumetric fuel economy may be possible through the use of a 97 RON fuel with the largest gains expected on the US06 cycle. Fuel economy impacts are strongly coupled to the heating value of the fuels in addition to changes in engine efficiency. Similarly, decreases in tailpipe CO 2 emissions are also achievable. However, simultaneous improvements in energy consumption, fuel economy, and tailpipe CO 2 emissions are not guaranteed and are dependent upon fuel formulation.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS2011

An Examination of Commercial Aviation Accidents and Incidents Related to Integrated Vehicle Health Management

The Integrated Vehicle Health Management (IVHM) Project is one of the four projects within the National Aeronautics and Space Administration's (NASA) Aviation Safety Program (AvSafe). The IVHM Project conducts research to develop validated tools and technologies for automated detection, diagnosis, and prognosis that enable mitigation of adverse events during flight. Adverse events include those that arise from system, subsystem, or component failure, faults, and malfunctions due to damage, degradation, or environmental hazards that occur during flight. Determining the causal factors and adverse events related to IVHM technologies will help in the formulation of research requirements and establish a list of example adverse conditions against which IVHM technologies can be evaluated. This paper documents the results of an examination of the most recent statistical/prognostic accident and incident data that is available from the Aviation Safety Information Analysis and Sharing (ASIAS) System to determine the causal factors of system/component failures and/or malfunctions in U.S. commercial aviation accidents and incidents.

Reveley, Mary S.↗
NASA NTRSDate not supplied

Understanding Solar Energetic Particles With STEREO HET

The project evaluates solar energetic particles (SEPs) in the Heliosphere utilizing in situ data from the STEREO mission. More specifically, raw data from the High Energy Telescope (HET) corresponding to the abundances and energy spectra of electrons, protons, He, and heavier nuclei was extracted. C codes were modified and written to analyze Pulse heights and fluxes in a readable format. Plots of the data were formulated in Python. Low fluxes of heavier elements prompted a revaluation of the onboard binning process. New selection criteria will be generated to orient the particle energy loss in the detectors with the expected locations of the energy tracks corresponding to each element.

Energetic Particles↗
DOE OSTI2021

A FETI approach to domain decomposition for meshfree discretizations of nonlocal problems

We propose a domain decomposition method for the efficient simulation of nonlocal problems. Our approach is based on a multi-domain formulation of a nonlocal diffusion problem where the subdomains share “nonlocal” interfaces of the size of the nonlocal horizon. This system of nonlocal equations is first rewritten in terms of minimization of a nonlocal energy, then discretized with a meshfree approximation and finally solved via a Lagrange multiplier approach in a way that resembles the finite element tearing and interconnect method. Specifically, we propose a distributed projected gradient algorithm for the solution of the Lagrange multiplier system, whose unknowns determine the nonlocal interface conditions between subdomains. Several two-dimensional numerical tests on problems as large as 191 million unknowns illustrate the strong and the weak scalability of our algorithm, which outperforms the standard approach to the distributed numerical solution of the problem. Finally, this work is the first rigorous numerical study in a two-dimensional multi-domain setting for nonlocal operators with finite horizon and, as such, it is a fundamental step towards increasing the use of nonlocal models in large scale simulations.

42 ENGINEERING↗
DOE OSTI2024

Weak-form latent space dynamics identification

Recent work in data-driven modeling has demonstrated that a weak formulation of model equations enhances the noise robustness of a wide range of computational methods. In this paper, we demonstrate the power of the weak form to enhance the LaSDI (Latent Space Dynamics Identification) algorithm, a recently developed data-driven reduced order modeling technique. We introduce a weak form-based version WLaSDI (Weak-form Latent Space Dynamics Identification). WLaSDI first compresses data, then projects onto the test functions and learns the local latent space models. Notably, WLaSDI demonstrates significantly enhanced robustness to noise. With WLaSDI, the local latent space is obtained using weak-form equation learning techniques. Compared to the standard sparse identification of nonlinear dynamics (SINDy) used in LaSDI, the variance reduction of the weak form guarantees a robust and precise latent space recovery, hence allowing for a fast, robust, and accurate simulation. We demonstrate the efficacy of WLaSDI vs. LaSDI on several common benchmark examples including viscid and inviscid Burgers', radial advection, and heat conduction. For instance, in the case of 1D inviscid Burgers' simulations with the addition of up to 100% Gaussian white noise, the relative error remains consistently below 6% for WLaSDI, while it can exceed 10,000% for LaSDI. Similarly, for radial advection simulations, the relative errors stay below 15% for WLaSDI, in stark contrast to the potential errors of up to 10,000% with LaSDI. Moreover, speedups of several orders of magnitude can be obtained with WLaSDI. For example applying WLaSDI to 1D Burgers' yields a 140X speedup compared to the corresponding full order model.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Two-color polarization spectroscopy measurements of Zeeman state-to-state collision induced transitions of nitric oxide in binary gas mixtures

We investigated collision induced transitions in the (0, 0) band of the A2Σ+–X2Π electronic transition of nitric oxide (NO) using two-color polarization spectroscopy (TCPS). Two sets of TCPS spectra for 1% NO, diluted in different buffer gases at 295 K and 1 atm, were obtained with the pump beam tuned to the R11(11.5) and OP12(1.5) transitions. The buffer gases were He, Ar, and N2. The probe was scanned while the pump beam was tuned to the line center. Theoretical TCPS spectra, calculated by solving the density matrix formulation of the time-dependent Schrödinger wave equation, were compared with the experimental spectra. A collision model based on the modified exponential-gap law was used to model the rotational level-to-rotational level collision dynamics. A model for collisional transfer from an initial to a final Zeeman state was developed based on the difference in cosine of the rotational quantum number J projection angle with the z-axis for the two Zeeman states. Rotational energy transfer rates and Zeeman state collisional dynamics were varied to obtain good agreement between theory and experiment for the two different TCPS pump transitions and for the three different buffer gases. One key finding, in agreement with quasi-classical trajectory calculations, is that the spin-rotation changing transition rate in the A2Σ+ level of NO is almost zero for rotational quantum numbers ≥8. It was necessary to set this rate to near zero to obtain agreement with the TCPS spectra.

Chemistry↗
DOE OSTI2025

Reduction of Porosity in Cementitious Waste Forms to Reduce Effective Diffusivity

Although current practices meet regulations for grout waste forms, development of sequestration materials and techniques for contaminants of concern could expand the use of grout waste forms and reduce risk to established processes from future compositional changes. There are contaminants in waste streams that are not permanently and completely sequestered in current grout waste forms under certain conditions. These contaminants include methyl mercury, 129 I, 99 Tc, and nitrate. Each of these species have minor fractions that are not permanently and completely isolated from the environment and therefore potentially contribute to long-term environmental impacts. An approach of interest includes the technique of reducing porosity to result in reduced leachability of all contaminants simultaneously. The current Savannah River Site (SRS) saltstone formulation was used to evaluate the relationship between leachability and porosity reduced waste forms by altering the water-to-binder ratio. Results indicated decreasing the water-to-binder directly reduced porosity and resulted in the waste form’s ability to more effectively immobilize nitrate. This work was funded by the Department of Energy Office of Environmental Management (DOE-EM) Technology Operations Office (TOO) Project # HQ221818.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1991

Periodic trim solutions with HP-version finite elements in time

Finite Element in Time has been proven to be a powerful alternative solving strategy for the rotor craft trim problem. Additionally, Finite Element Method in Time has been developed in various versions like time-marching framework, Galerkin framework, Rayleigh-Ritz framework, and mixed formulation. Recently, this method was applied to the rotorcraft trim problem to obtain linearized solutions. The rotorcraft trim problem consists of trying to find a period solution for period-coefficient, differential equations subject to side constraints where certain force and momentum balance equations are forced to be equal to zero. There are free (or trim) parameters that are chosen to meet these side constraints. This project aims at expanding the application, in terms of the rotorcraft trim problem, from a linearized solution to nonlinear solution.

Source record↗
NASA NTRS1992

The NASA Computational Aerosciences Program - Toward teraFLOPS computing

The Computational Aerosciences (CAS) project of the High Performance Computing and Communications program is presented and discussed. The main emphasis of this presentation is on the applications portion of the CAS program, which includes a High-Speed Civil Transport element, a High Performance Aircraft element, a NASP-Derived Vehicle element, and an Aerobraking element. Two major thrusts of this program are the enhancement of simulation capabilities using multidiscipline formulations and the improvement in processing efficiency via massive parallel computer hardware. Current activities in these two areas at Ames, Langley and Lewis, are presented and discussed.

Holst, Terry L.↗