Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partner”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

CPAP Ventilators Needed for Rapid Response to COVID-19 by Modification of CPAP Equipment

Early on in the COVID-19 pandemic, potential ventilator shortages were a critical issue identified by national health care providers. Capacity modeling at the time suggested patient demand may exceed ventilator supply. Thus, the challenge became finding an urgent interim solution to meet health care needs. Our initial hypothesis was that CPAP technology could be modified to provide similar functionality to a ventilator, relieving demand and allowing physicians to decide which patients need high end machines, ultimately saving lives. In conjunction with medical experts and pulmonologists, we were able to identify three key thrusts associated with this research problem: (1) modification of CPAP technology to allow for 02 input that would be capable of providing ventilation; (2) development of an alarming function that would provide real-time audible alarms to alert medical personnel to critical conditions, which would be used inline with CPAP technology; and (3) a method of sterilizing expiratory air from such a system in order to protect medical personnel from biohazard, since CPAPs vent to the atmosphere. We were unable to realize results for thrust 1 (CPAP modification for 02); we identified potential safety issues associated with utilizing medical grade oxygen with a common CPAP device. In order to characterize and mitigate these issues, we would need to partner closely with a device manufacturer; such a partnership could not be achieved in the timeframe needed for this rapid response work. However, we determined that some medical grade BiPAP devices do not need this modification and that the significant progress on thrusts 2 and 3 would be sufficient to buy down risk of a massive ventilator shortage. Our team built a prototype alarm system that can be utilized with any assistive respiratory device to alert on all key conditions identified by medical personnel (high pressure, low pressure, apnea, loss of power, low battery). Finally, our team made significant progress in the rapid prototyping and demonstration of an inline UV air purifier device. The device is cost efficient and can be manufactured at scale with both commercially available and additively manufactured parts. Initial tests with SARS-CoV-2 analog bacteriophage MS2 show 99% efficacy at reducing bioburden. Following a successful demonstration of the prototype device with medical personnel, we were able to obtain follow-on (non-LDRD) funding to provide additional device characterization, validation, and production in order to respond to an immediate regional need.

42 ENGINEERING↗
DOE OSTI2020

Center of Excellence Collaboration Projects: Second Wave

The NEAMS program aims to develop an integrated multi-physics simulation capability “pellet-to-plant” for the design and analysis of future generations of nuclear power plants. In particular, the Reactor Product Line code suite's multi-resolution hierarchy is being designed to ultimately span the full range of length and time scales present in relevant reactor design and safety analyses, as well as scale from desktop to petaflop computing platforms. In particular the NEAMS program is supporting the development of novel thermal-hydraulic codes. The Center of Excellence for Thermal Fluids Application in Nuclear Energy, launched in 2018, has as its key goals to serve as a front door to industry. The Center of Excellence for Thermal Fluids Applications in Nuclear Energy has recently launched a program to start collaborative efforts between the laboratories and industry with the objective of stimulating cooperation and increasing adoption of T/H tools developed under NEAMS by the industry-at-large. In particular, two industry partners agreed to participate in a second wave of short-term collaborations aimed at demonstrating the value of NEAMS tools to their designs. These are Framatome and TerraPower who proposed projects related to LWR (Light Water Reactor) and MSFR (Molten Salt Fast Reactor) designs respectively. In this report we present the results of these two collaborations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

National Security Research Center 2021 Strategic Plan

The National Security Research Center (NSRC) is a dynamic organization staffed with an expert, highly trained experts. The NSRC opened its doors in June 2019, making it one of the newest large organizations at Los Alamos National Laboratory (LANL). It supports a broad range of researchers within the LANL Weapons Program, customers across other National Nuclear Security Administration (NNSA) labs and sites, and partners in the Department of Defense (DoD). The maintenance and growth of the NSRC necessitate strategy and foresight. The NSRC leadership has developed a series of strategic goals through discussions with NSRC staff, customers, LANL leadership, and similar research institutions around the country to guide the NSRC leadership in moving the Center forward over the next five years.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Surface Atmosphere Integrated Field Laboratory

To help improve understanding and modeling of processes connected to mountain hydrology, the Atmospheric Radiation Measurement (ARM) user facility will operate the Surface Atmosphere Integrated Field Laboratory (SAIL) field campaign in central Colorado. From September 2021 to June 2023, an ARM Mobile Facility will collect measurements with a focus on the 300-square-kilometer (116-square-mile) East River Watershed within the Upper Colorado River Basin. SAIL will combine atmospheric measurements from ARM, a U.S. Department of Energy (DOE) scientific user facility, with existing surface and subsurface data from partner research organizations. Researchers will develop detailed measurements of mountainous water-cycle processes as they pertain to the Colorado River, which supplies water for 40 million people in the American West. Through SAIL, researchers from DOE national laboratories, universities, and research centers and agencies will enable an atmosphere-through-bedrock understanding of mountainous water cycles. By observing what is happening above and below ground to influence hydrology at various scales across the East River Watershed, SAIL will provide insights into how Upper Colorado River watersheds interact with the atmosphere to produce water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Development of Bio-Compatible Fluorescent Sensor

The development for biocompatible fluorescent sensors is used to understand the movement and fracking of wild boar at SRS. Current fracking methods for wild boar include physical tagging, camera monitoring, and foot tracks in the soil. None of these methods are highly effective in determining the path and habits of the animals as it depends on live imaging, soil consistency (lack of rain), and potentially a gps system is tagged properly. This system allows fracking using an additive digested by the animal and released in the urine that will fluoresce when excited with a particular laser. This method helps determine the actual movements of the animals and even provide a potential prediction model based on their routine. We partnered with Ft. Gordon to utilize their animal testing expertise in determining the best material and pathway for these materials to be excreted.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Integrated Optimization and Control of a Hybrid Gas Turbine/sCO 2 Power System

During phase-I, the project team led by Echogen Power Systems (EPS) had two primary objectives based on investigating the application of gas turbines with supercritical carbon dioxide (sCO 2 ) power cycles. The first objective was to improve the overall efficiency and performance of a hybrid gas turbine/sCO 2 power system through a joint optimization of the two subsystems (gas turbine and sCO 2 power cycle) using non-linear optimization techniques that simultaneously evaluate thermal performance of the combined cycle. The hybrid power system included several points of interaction, including (but not limited to) gas turbine exhaust, fuel heating, inlet chilling and turbine cooling. The second objective was to establish a baseline transient response model of the hybrid power system and a notional microgrid and begin steps to integrate the control systems of the three major elements (gas turbine, sCO 2 cycle and grid controller). The project team established a baseline performance for a combined cycle power plant using a production gas turbine and scaled sCO 2 power cycle only utilizing exhaust heat recovery. Echogen’s non-linear techno-economic optimization code was extended by adding gas turbine component models derived from a in-house developed gas turbine design code. With the two cycles coupled by the gas turbine exhaust, design parameters of both cycles were allowed to vary simultaneously to determine performance opportunity versus isolated designs. Returning to the baseline gas turbine/sCO 2 power cycle transient models: Echogen had in-house developed sCO 2 cycle transient model in GT-Suite system simulation software, and had partnered with Siemens Finspång for gas turbine transient model, and Siemens PTI group to provide micro-grid load profile as well as hybrid power cycle generated load (power and frequency) analysis. The transient model for the SGT-750 Siemens gas turbine was a “black-box” functional mock-up interface (FMI) model developed by Siemens Industrial Turbomachinery in Finspång, Sweden. The SGT-750 is a twin-shaft gas turbine that produces 40 MW electricity with an efficiency of about 40% at ISO conditions. At 100% gas turbine throttle (load), the SGT-750 has average exhaust conditions of 114.6 kg/s and 469.8°C. The transient model for sCO 2 power cycle was developed by Echogen in GT-SUITE 1D system simulation software platform. The basic CO 2 flow circuit has single-shaft turbomachinery with net 11.5 MW electrical power output at design conditions. The power turbine has a double-ended shaft with one end connected to synchronous generator through a fixed-ratio gearbox. The other end of power turbine is connected to the compressor through a continuously variable transmission. The major components of the sCO 2 power cycle modeled include air cooled condenser/cooler, CO 2 compressor, recuperator, two waste heat exchanger coils, power turbine, continuous variable transmission, gearbox and generator. Integration of SGT-750 transient model and sCO 2 power cycle transient model was done in Matlab Simulink. In the integrated model, the gas turbine and sCO 2 power cycle interacted at two points, first one being the gas turbine exhaust gas flow rate and temperature, which were inputs to sCO 2 power cycle model. The second point was the distribution of micro-grid load demand signal between the SGT-750 generator and sCO 2 cycle generator. For a given combined-cycle load demand, the gas turbine load demand was equal to the total demand minus the sCO 2 cycle power generated. In the present study the integrated model was simulated for two cases of grid load demand: (i) for a step change, both positive-step and negative-step, in grid load demand (ii) for a micro-grid load demand curve provided by Siemens PTI group. Finally, the time series plots representing load demand versus integrated system response were presented including the sCO 2 power cycle control system performance plots. The actual generated power and frequency of both the generators, gas turbine and sCO 2 power cycle, was supplied to Siemens PTI group for dynamic grid assessment, results of which are provided in appendices.

03 NATURAL GAS↗
DOE OSTI2020

Global Disease Modeling & Forecasting Center [PowerPoint]

The Global Disease Modeling & Forecasting Center works in union with academia, industry, the US Government and global partners to develop, validate, and operationalize epidemiological models to combat infectious diseases. It's mission is to Apply multi-scale modeling and advanced data science to help the world detect, understand, forecast, prevent, and provide decision support in response to emerging and re-emerging disease outbreaks. The presentation explains LANL's role in more detail.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Working in Partnership for a Resilient and Innovative Energy Future (Progress Report 2020)

This annual report from the Better Buildings Initiative contains information about partner projects, energy and cost savings, and new program initiatives. The 2020 Progress Report also recognizes the latest group of Better Buildings Goal Achievers - organizations who have met their energy, water, and/or financing commitments under the Better Buildings or Better Plants Challenge.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Favipiravir Flow Synthesis

Researchers at Los Alamos have invented a novel flow/batch chemistry synthetic process to produce the small molecule anti-viral favipiravir more cheaply and rapidly to enable on-demand production for pandemic response. Current methods for synthesizing favipiravir are constrained by long reaction times and low yields. If ongoing clinical trials for favipiravir demonstrate its effectiveness as a COVID-19 antiviral, and as a broad spectrum anti-viral for treating future viral outbreaks, this synthesis would help alleviate potential drug shortages and supply chain issues for the manufacturing and availability of this small molecule anti-viral. This U.S.-based synthesis route would be capable of scale-up for making large (kilogram) amounts of favipiravir as needed to assist with clinical trial needs and demand for patient treatment, and can also produce isotopically labeled favipiravir. We are seeking a CRADA partner to finalize method development who has interest in licensing the method and employing it for domestic production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

3D Broadband, Noncontact, and Nonlinear Phased Array

Researchers at Los Alamos have developed a 3D broadband, noncontact, and nonlinear ultrasonic phased array technology that enables businesses to characterize and identify cracks and defects using laserbased sensing at ultra-high resolution. It can be applied to a wide range of commercial and industrial markets, e.g., aerospace, aeronautical, nuclear energy, oil and gas, and civil and material engineering and more broadly to those interested in the non-destructive evaluation (NDE) of materials and structures. Traditional phased-array technology for subsurface imaging operate over a narrow frequency range, with a limited number of sensors, using one type of ultrasonic waves which may decrease the likelihood of detecting a structural material crack. This technology fills the information gap by utilizing the potential of laser-based sensing to remove all these limitations. We are seeking a commercialization partner to license the technology or fund us through a Cooperative Research and Development Agreement (CRADA) to further develop a usable product for commercial purposes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hybrid Ceramic-CMC Vane with EBC for Future Coal Derived Syngas Fired 65% Efficient Turbine Combined Cycle

The efficiency of both simple cycle and combined cycle power generation systems scale with the peak temperature at which the gas exits the combustor to drive the turbine. In conventional systems, a substantial fraction of the total turbine core flow exiting the compressor is diverted downstream to cool metallic turbine hardware rather than power the turbine, much of which is used to cool the first-stage turbine vane. The use of coal derived syngas fuels provides an additional challenge to the lifetime of materials utilized in the turbine, as particulate byproducts created in the coal gasification process melt in the combustion gas, and can subsequently deposit and interact with the turbine hardware. The development of durable hot-section materials capable of operating at temperature well above that of single crystal superalloy airfoil/zirconia based thermal barrier coatings is critical to realizing 65% efficient coal derived syngas fired gas turbine based power systems. To enable higher turbine inlet temperatures while lowering cooling air requirements, United Technologies Research Center (UTRC), the central R&D laboratory supporting UT Pratt & Whitney, led the conceptual design of a new type of ceramic composite turbine hot section materials system. The design focused on a novel hybrid monolithic ceramic-fiber reinforced ceramic matrix composite (CMC) first stage turbine vane having an environmental barrier coating. By utilizing ceramic construction in the turbine hot-section, the core flow normally used to cool metallic components will be substantially reduced, increasing efficiency and reducing emissions. To provide the framework for future demonstration testing, UTRC partnered with University of North Dakota Energy and Environmental Research Center (UNDEERC) to provide a conceptual design for a gasified coal fed high-pressure turbine combustor system designed to mimic the conditions expected in a future 65% fuel to busbar efficient syngas fueled gas turbine based combined cycle. The UNDEERC and UTRC collaborated on characterizing dusts from coal gasifier filtration systems.

10 SYNTHETIC FUELS↗
DOE OSTI2020

SFAI and Related Technologies

Researchers at Los Alamos have developed Swept-Frequency Acoustic Interferometry (SFAI) a technology that enables businesses to have greater control over their industrial processes, allowing for significantly improved efficiency by giving operators vital composition and flow rate information in real-time. This technology fills the information gap by providing this data non-invasively and at a fraction of the cost of traditional composition meters. SFAI uses engineered ultrasound and advanced signal processing to characterize multiphase flow (e.g., liquids, gasses, multi-phase mixtures) and other flows inside sealed containers and flow pipes. By being both low-cost and non-invasive, this technology is set to disrupt the current oil field monitoring state-of-the-art by providing individual well-level composition data, compared to the multi-well macroscopic information that is currently available. We are seeking a commercialization partner to license the technology or fund us through a Cooperative Research and Development Agreement (CRADA) to a further develop a usable product for commercial purposes.

03 NATURAL GAS↗
DOE OSTI2020

Catalina Repower Feasibility Study: NREL Phases I & II Summary Report

Engineers at the National Renewable Energy Laboratory (NREL) supported Southern California Edison (SCE) and the United States Environmental Protection Agency (EPA) by conducting technical and economic analyses for energy systems at Santa Catalina (Catalina) Island, which is located 22 miles off the coast of Long Beach, California. This effort was part of a broader Repower Catalina Feasibility Study that was also supported by NV5, an engineering consulting firm and project partner to NREL for this analysis. This document describes NREL’s techno-economic modeling and optimization analysis for the first two phases of this project which focus on supply-side generation and energy storage options for Catalina. SCE’s goal for this analysis is to determine a strategy for electricity generation on Catalina Island that results in lower energy costs, improved energy resiliency, and reduced air emissions. EPA goals for this effort are to reduce emissions of air pollution and encourage renewable energy development on contaminated and formerly contaminated lands when such development is aligned with the community’s vision for the site. Currently, an on-island SCE power plant serves the Catalina Island electrical load with 6 reciprocating diesel generators totaling 9.4 MW; 23 propane-fueled microturbines totaling 1.5 MW; and a 1-MW, 7.2-MWh sodium sulfur battery energy storage system (BESS). In 2017, the electricity consumption on the island was 29.1 GWh, with an average load of 3.3 MW and peak load of approximately 5.5 MW. Considering new environmental standards on diesel generator emissions from California’s South Coast Air Quality Management District, a 60% renewable energy target for 2030 laid out in California’s Senate Bill 100, SCE’s Clean Power Electrification Pathway, and the characteristics of the island’s existing diesel generators, SCE is seeking to evaluate the technical and economic implications of different energy technology options to determine a path forward. Phases I and II of the Repower Catalina Feasibility Study, summarized in this document, evaluated the following: Interconnection with the mainland via an undersea cable; On-island fossil fuel generation, including diesel, propane, and/or liquified natural gas (LNG); On-island renewable energy (RE) technologies, including solar photovoltaics (PV), wind turbines, and wave energy devices; BESS to support the above generation technologies; Initial analysis of the potential impacts of implementing energy efficiency measures. Results indicate strong techno-economic potential for a mix of on-island diesel and/or propane generators, solar PV, BESS, and energy efficiency measures to help SCE and Catalina achieve their goals compliant with California’s emissions and clean energy standards while minimizing electricity life cycle costs (LCC) over the 30-year analysis period. This document summarizes the considerations and findings of Phases I and II, focusing on high-level takeaways from Phase I and more detailed results from Phase II, and discusses a potential path forward for Phase III.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Accobeam - Acoustic Collimated Beam

Researchers at Los Alamos have developed a collimated acoustic imaging technology for non-destructive characterization of highly attenuating media, such as concrete, rocks, mud, and metal casings. The technology is used to investigate structural defects that could compromise important assets such as well boreholes, building structures and sensitive materials like explosives. Current acoustic methods are often unable to penetrate such materials deeply for more informative analysis, which limits what can be learned about asset structural integrity, crucial information companies require to make investment decisions such as fixing or replacing structures well before assets are completely compromised. ACCObeam provides requisite penetration and high-resolution acoustic imaging with applications in borehole imaging, explosives threat evaluation, and structural health evaluation. This technology will potentially save companies significant money by producing accurate and useful visual analyses to better understand the actual condition of assets in the field and respond accordingly. Los Alamos is searching for a collaboration partner to develop this technology for commercial applications that will lead to licensing opportunities for broad industry deployment.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Data-Driven Understanding of Low-to-Moderate Income Customers’ Adoption and Financial Qualification in Community Solar

Through this project, we sought to gather a body of customer data that either proved or disproved our assumption that metrics other than FICO can and should be used to qualify customers for community solar. Using customer data on income, FICO scores, and utility/rent/cell phone repayment history, we developed an alternative metric in order to test in the market at a small scale whether new qualifying metrics could open the shared solar market up to millions of additional households. We demonstrate that the EnergyScore is both more accurate in qualifying customers that will not default, and more inclusive in qualifying low to moderate income households. We are now in the process of utilizing the EnergyScore in a number of pilot projects, building a robust dataset of customer churn and default, and subsequently disseminating this data to more traditional and larger scale financiers and solar developer partners to change the way potential customers are qualified.

14 SOLAR ENERGY↗
DOE OSTI2020

Nanostructures for Electrical Energy Storage (NEES) (2020 Final Technical Report)

Nanostructures for Electrical Energy Storage (NEES, www.efrc.umd.edu) was an Energy Frontier Research Center supported by the DOE Office of Science, Basic Energy Sciences, from 8/1/2009 to 7/31/2020. Led by the University of Maryland, NEES enjoyed extensive collaborations with its funded partners, including two DOE Laboratories and six universities. The NEES vision has been to reveal a set of scientific insights and design principles that can underpin a next-generation electrical energy storage approach, building on advances in nanoscale science and technology to achieve simultaneous high power and high energy over extended charge/discharge cycling. The vision is motivated by the recognition that scaling into the nano regime opens the door to new physical phenomena and that the tools enlisted in nanoscale research provide major new opportunities for the synthesis not only of materials at molecular scale but for structures at nano scale and above. NEES has translated this vision into its research program based on two observations. First, while the behavior of ions and electrons in electrolytes and in electrode materials is crucial to electrical energy storage (or more appropriately electrochemical energy storage), it is the transport of ion and electron charge between different structural components of a storage device that ultimately determine its performance. With it well recognized that the choice of electrode materials typically constrain ion transport kinetics as well as maximum ion concentration, the search for better electrode materials has been a primary driver of battery research. At the same time the synthesis of electrodes is typically based on aggregation of particles with varying size, shape, and orientation in the electrode. Together with the presence of additional materials to impart electrical conductivity and cohesion to the composite electrode, change in electrode materials is necessarily accompanied by structural changes at the nano/micro scale that are difficult to categorize and manage. From the beginning, NEES’ vision has been to create and study simpler, highly controlled spatial arrangements of known materials as battery components (electrodes, current collectors, and electrolyte) and to understand how design and structure above the molecular scale determines the energy storage performance available from known materials. Second, advances in nanoscience dramatically expanded the portfolio of synthesis methods, structural motifs, and new phenomena available for research. Some of these gave rapid access to new building blocks at the deep nanoscale (e.g., carbon nanotubes grown by self-assembly, nanoscale arrays formed by electrochemical self-alignment, monolayer films controlled by self-limiting reaction). Such advances served as the enabler for the NEES vision to be pursued experimentally through study of 3D structures created and controlled at the nano, micro, and meso scales. Here, we use meso as in the BES MESO Report, implying not only intermediate or varying length scales, but very much the way behavior is influenced by other factors including aggregation of nanocomponents at different densities and spatial configurations, statistical variations in the aggregates, hierarchical architectures in which they can be assembled, or local 3D configurations that result from the architectures. Over its life cycle, NEES has pursued two overarching goals: (1) to understand the scientific fundamentals of electrochemical storage from the nanoscale to the mesoscale; and (2) to create and learn from innovative, controlled, heterogeneous nanostructures, where such nanostructures can enable the first goal and serve as models for future paradigms in energy storage. Specific goals have included: Synthesize heterogeneous nanostructures comprised of multiple materials arranged in controlled fashion and characterize their behavior; Demonstrate and elucidate design principles for achieving simultaneous high power and high energy; Develop materials processes which enable precision control of thin layers and 3D structures; Investigate the impact of artificial interphases on electrode stability during ion insertion/deinsertion; Create dense arrays of nanostructures to understand how the architecture of these assemblies, along with nanostructure design, influences energy storage behavior at the mesoscale; Identify and understand the consequences of nanoconfinement and local inhomogeneities in 3D mesoscale arrays; Develop and apply computational models to stimulate, guide and interpret experiments.

25 ENERGY STORAGE↗
DOE OSTI2021

Growth of New High-Quality and Large-Size Single Crystals via High Pressure Floating-Zone Technique

This award supports experimental materials physics research on a class of technologically relevant materials that cannot form under ambient conditions. With the complementary expertise at Louisiana State University (LSU) and infrastructure at Oak Ridge National Laboratory (ORNL), single crystals of these materials will be synthesized using the high-pressure floating-zone technique. Our ability to grow high-quality single crystals will facilitate advanced characterization of these materials and improve the scientific outcomes. In addition to in-house material characterization, the principle investigator will partner with scientists at ORNL and Brookhaven National Laboratory (BNL) to tackle materials problems using the state-of-the-art characterization techniques. This will allow us to explore the fundamental physics underlying the emergent phenomena only seen in materials prepared under extreme conditions. Our ultimate goal is to address one of the grand challenges of materials science: how do complex phenomena emerge from simple ingredients? The proposed project will also spearhead a unique opportunity to train “new breed” scientists, co-advised by experts at both LSU and U. S. Department of Energy National Laboratories. They will be essential for expanding materials physics research with ability to grow crystals, characterize their properties, and design new materials -- an imperative skill that is scarce in the U. S. scientific community.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ice Nucleating Particles, Aerosols and Clouds over the Higher Latitude Southern Ocean

Improved understanding of aerosol-cloud-precipitation interactions is a key goal of the DOE-ASR program. Ice Nucleating Particles (INPs) are rare aerosol particles that trigger ice formation in clouds. By doing so they may initiate precipitation in clouds, and this impacts cloud lifetime. Nowhere may the role of INPs be manifested so dramatically as in the Southern Ocean (SO). This vast region was the focus of the DOE-ARM MARCUS (Measurement of Aerosols, Radiation and CloUds over the Southern Oceans) and MICRE (Macquarie Island Cloud and Radiation Experiment) campaigns. In the SO, a deficit of INPs has been a leading hypothesis for why liquid clouds persist, which underlays the bias of global climate models in predicting excess shortwave radiation reaching the ocean surface between 55°S and Antarctica. In this study, we used the 6-month acquisition of INP data on four MARCUS cruises from Hobart, Tasmania, to Antarctica, and the single-location full annual INP cycle observed in MICRE, to gain a holistic, quantitative picture of the INP number concentrations as a function of temperature and their variability over SO latitudes from 43°S to Antarctica. Augmenting initial processing of filter collections of aerosol particles during MARCUS and MICRE, additional freezing studies following thermal treatment (to removes INPs associated with microbes) and peroxide treatment (to remove all organics), as well as ionic chemistry and total organic carbon analysis, were applied to samples to improve time and space resolution, and differentiate marine from terrestrial contributions. We also performed Next Generation Sequencing to determine that bacterial composition can tag periods of enhanced and degraded marine organic INPs and the relative lack of occurrence of land-sourced bio-particles. Through these and other analyses, INP data were categorized into representative source types (e.g., marine versus terrestrially-influenced). The products of our analyses are being used to parameterize ice formation for use in numerical modeling studies to determine if, and when, ocean-derived INPs control the microphysical composition and radiative balance of SO clouds in a manner not presently captured by global models. The specific objectives and approaches proposed were largely accomplished, including: 1) Additional and value-added chemical and biological analyses of archived samples of aerosols were completed to categorize and quantify INP types and concentrations over the SO. 2) Analyses were completed to place INP data in meteorological and aerosol context. 3) Sea spray aerosol INPs were demonstrated to dominate the SO region in all but episodic events. 4) New parameterizations for INP sources relevant to the SO were constructed. 5) Collaborative modeling studies demonstrating the crucial role of INPs in determining cloud radiative and precipitation properties were conducted with MARCUS and MICRE partners. Collaborative publication submissions in this regard ensued within the two year study. This work will advance the science of interactions of aerosols, clouds and precipitation, to improve their representation in regional and global climate models. Results have informed representation of primary ice crystal nucleation, give inference to the role of secondary processes, and improve investigations of aerosol influences on clouds via ice nucleation over SO high latitudes and similar vast ocean regions. Application will improve representation of such interactions for clouds in both regional and global climate models. The data base and analyses methods applied will continue to serve research studies in the future.

58 GEOSCIENCES↗