SEARCH · Engineering Papers

Results for “orbital order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Navigation of the TSS-1 mission

The Tethered Satellite System Mission was analyzed to determine its impacts on the Mission Control Center (MCC) Navigation section's ability to maintain an accurate state vector for the Space Shuttle during nominal and off-nominal flight operations. Tether dynamics expected on the Shuttle introduces new phenomena when determining the best estimation of its position and velocity. In the analysis, emphasis was placed on determining the navigation state vectors accuracies resulting when the tether induced forces were and were not modeled as an additional acceleration upon processing tracking measurements around a TSS-1 trajectory. Results of the analyses show that when the forces are not modeled in the state vector generation process, the resulting solution state reflects a solution about the center of gravity of the tethered system and not that of the orbiter. The Navigation team's ability to provide accurate state vector estimates necessary for trajectory planning are impeded. In addition to this consequent, is an impact on Onboard Navigation state vector accuracies. These analyses will show that in order to preserve an accurate state onboard the orbiter a new operational procedure would have to be adopted.

Jackson, Timothy C.↗

NASA NTRS2015

Organics in Space: Results from Space Exposure Platforms and Nanosatellites

A series of successful laboratory astrophysics experiments performed on International Space Station(ISS) external platforms such as EXPOSE have provided insights into the evolution of organic and biological materials in space and planetary environments. The study of the reactions, destruction, and longevity of organics in the space environment is of fundamental interest. To provide an accurate outer space environment for extended durations, exposure experiments in low Earth orbit have been conducted in the last decades in order to examine the consequences of actual space conditions including combinations of solar and cosmic radiation, space vacuum, and microgravity. The OOREOS (OrganismORganic Exposure to Orbital Stresses) nanosatellite studied in situ during the 6-month primary and 1-year extended mission the photochemical processing of selected PAHs in low Earth orbit (650 km altitude); results were autonomously telemetered to Earth. We report on the methods and flight preparation of samples for space exposure platforms and results on the stability of organic thin-films. The UV-vis degradation process of thin-films was recorded over time, which revealed intriguing and counter-intuitive photolytic kinetics that will be re-investigated on the ISS in a space environment.

Space weathering↗

NASA NTRS2004

Qualification of Laser Diode Arrays for Mercury Laser Altimeter Mission

NASA's requirements for high reliability, high performance satellite laser instruments have driven the investigation of many critical components; specifically, 808 nm laser diode array (LDA) pump devices. The MESSENGER mission is flying the Mercury Laser Altimeter (MLA) which is a diode-pumped Nd:YAG laser instrument designed to map the topography of Mercury. The environment imposed on the instrument by the orbital dynamics places special requirements on the laser diode arrays. In order to limit the radiative heating of the satellite from the surface of Mercury, the satellite is designed to have a highly elliptical orbit. The satellite will heat near perigee and cool near apogee. The laser power is cycled during these orbits so that the laser is on for only 30 minutes (perigee) in a 12 hour orbit. The laser heats 10 C while powered up and cools while powered down. In order to simulate these operational conditions, we designed a test to measure the LDA performance while being temperature and power cycled. Though the mission requirements are specific to NASA and performance requirements are derived from unique operating conditions, the results are general and widely applicable. We present results on the performance of twelve LDAs operating for several hundred million pulses. The arrays are 100 watt, quasi-CW, conductively-cooled, 808 nm devices. Prior to testing, we fully characterize each device to establish a baseline for individual array performance and status. Details of this characterization can be found in reference. Arrays are divided into four groups and subjected to the temperature and power cycling matrix are shown.

Stephen, Mark↗

NASA NTRS2002

Solid Freeform Fabrication: An Enabling Technology for Future Space Missions

The emerging class of direct manufacturing processes known as Solid Freeform Fabrication (SFF) employs a focused energy beam and metal feedstock to build structural parts directly from computer aided design (CAD) data. Some variations on existing SFF techniques have potential for application in space for a variety of different missions. This paper will focus on three different applications ranging from near to far term to demonstrate the widespread potential of this technology for space-based applications. One application is the on-orbit construction of large space structures, on the order of tens of meters to a kilometer in size. Such structures are too large to launch intact even in a deployable design; their extreme size necessitates assembly or erection of such structures in space. A low-earth orbiting satellite with a SFF system employing a high-energy beam for high deposition rates could be employed to construct large space structures using feedstock launched from Earth. A second potential application is a small, multifunctional system that could be used by astronauts on long-duration human exploration missions to manufacture spare parts. Supportability of human exploration missions is essential, and a SFF system would provide flexibility in the ability to repair or fabricate any part that may be damaged or broken during the mission. The system envisioned would also have machining and welding capabilities to increase its utility on a mission where mass and volume are extremely limited. A third example of an SFF application in space is a miniaturized automated system for structural health monitoring and repair. If damage is detected using a low power beam scan, the beam power can be increased to perform repairs within the spacecraft or satellite structure without the requirement of human interaction or commands. Due to low gravity environment for all of these applications, wire feedstock is preferred to powder from a containment, handling, and safety standpoint. The energy beams may be either electron beam or laser, and the developments required for either energy source to achieve success in these applications will be discussed.

Taminger, Karen M. B.↗

NASA NTRS1987

Optimization of payload mass placement in a dual keel space station

In order to keep a Space Station in a stable low-Earth orbit, angular momentum storage and translational attitude control systems will have to be used. In order to minimize the size of these attitude control systems, the induced gravity gradient torque effects will have to be minimized. This can be done by minimizing the cross-products of inertia of the Station through the management of payload placement with the Station geometry. A derived and automated methodology is presented which utilizes mathematical nonlinear programming techniques. An optimal arrangement of a set of five payloads on a Dual Keel Space Station was found that minimized the cross products of inertia and thus the required controllability resources.

Ferebee, Melvin J., Jr.↗

NASA NTRS2009

Turbulent Wing-Leading-Edge Correlation Assessment for the Shuttle Orbiter

This study was conducted in support of the Orbiter damage assessment activity that takes place for each Shuttle mission since STS-107 (STS - Space Transportation System). As part of the damage assessment activity, the state of boundary layer (laminar or turbulent) during reentry needs to be estimated in order to define the aerothermal environment on the Orbiter. Premature turbulence on the wing leading edge (WLE) is possible if a surface irregularity promotes early transition and the resulting turbulent wedge flow contaminates the WLE flow. The objective of this analysis is to develop a criterion to determine if and when the flow along the WLE experiences turbulent heating given an incoming turbulent boundary layer that contaminates the attachment line. The data to be analyzed were all obtained as part of the MH-13 Space Shuttle Orbiter Aerothermodynamic Test conducted on a 1.8%-scale Orbiter model at Calspan/University of Buffalo Research Center in the Large Energy National Shock Tunnels facility. A rational framework was used to develop a means to assess the state of the WLE flow on the Orbiter during reentry given a contaminated attachment-line flow. Evidence of turbulent flow on the WLE has been recently documented for a few STS missions during the Orbiter s flight history, albeit late in the reentry trajectory. The criterion developed herein will be compared to these flight results.

King, Rudolph A.↗

DOE OSTI2024

Ligand field exciton annihilation in bulk CrCl 3

The layered van der Waals material CrCl 3 exhibits very strongly bound ligand field excitons that control optoelectronic applications and are connected with magnetic ordering by virtue of their d-orbital origin. Time-resolved photoluminescence of these exciton populations at room temperature shows that their relaxation is dominated by exciton–exciton annihilation and that the spontaneous decay lifetime is very long. Furthermore, these observations allow the rough quantification of the exciton annihilation rate constant and contextualization in light of a recent theory of universal scaling behavior of the annihilation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1995

Critical radiation fluxes and luminosities of black holes and relativistic stars

The critial luminosity at which the outward force of radiation balances the inward force of gravity plays an important role in many astrophysical systems. We present expressions for the radiation force on particles with arbitrary cross sections and analyze the radiation field produced by radiating matter, such as a disk, ring, boundary layer, or stellar surface, that rotates slowly around a slowly rotating gravitating mass. We then use these results to investigate the critical radiation flux and, where possible, the critical luminosity of such a system in genral relativity. We demonstrate that if the radiation source is axisymmetric and emission is back-front symmetric with repect to the local direction of motion of the radiating matter, as seen in the comoving frame, then the radial component of the radiation flux and the diagonal components of the radiation stress-energy tensor outside the source are the same, to first order in the rotation rates, as they would be if the radiation source and gravitating mass were not rotating. We argue that the critical radiation flux for matter at rest in the locally nonrotating frame is often satisfactory as an astrophysical benchmark flux and show that if this benchmark is adopted, many of the complications potentially introduced by rotation of the radiation source and the gravitating mass are avoided. We show that if the radiation field in the absence of rotation would be spherically symmetric and the opacity is independent of frequency and direction, one can define a critical luminosity for the system that is independent of frequency and direction, one can define a critical luminosity for the system that is independent of the spectrum and angular size of the radiation source and is unaffected by rotation of the source and mass and orbital motion of the matter, to first order. Finally, we analyze the conditions under which the maximum possible luminosity of a star or black hole powered by steady spherically symmetric radial accretion is the same in general relativity as in the Newtonian limit.

Lamb, Frederick K.↗

NASA NTRS1994

(abstract) Venus Gravity Data Reduction

The Magellan spacecraft has provided high resolution gravity data to its very end, October 13, 1994, when it was consumed by the Venusian atmosphere. After aerobraking in August of 1993 to attain a near circular orbit, excellent high latitude data were acquired which previously were very weak during the elliptical orbit coverage. There are 1500 orbits during the near circular orbit, supplying redundant coverage at different geometries over many features. This allowed the relaxation of apriori constraints, so true amplitudes are being extracted from the data. In this paper we present the results of a 75(sup th) degree and order field that incorporates all the old Pioneer Venus Orbiter data as well as all the Magellan data to September 1994. The new results reflect even higher correlation with topography, higher amplitude values for the highs and lows, and global results that have essentially very little apriori constraint on the solution parameters. We also correlate our new model with the earlier ones based on 60(sup th) and 40(sup th) degree and order presentations.

Magellan Venus gravity orbits topography surface f↗

NASA NTRS2014

The Interior and Orbital Evolution of Charon as Preserved in Its Geologic Record

Pluto and its largest satellite, Charon, currently orbit in a mutually synchronous state; both bodies continuously show the same face to one another. This orbital configuration is a natural end-state for bodies that have undergone tidal dissipation. In order to achieve this state, both bodies would have experienced tidal heating and stress, with the extent of tidal activity controlled by the orbital evolution of Pluto and Charon and by the interior structure and rheology of each body. As the secondary, Charon would have experienced a larger tidal response than Pluto, which may have manifested as observable tectonism. Unfortunately, there are few constraints on the interiors of Pluto and Charon. In addition, the pathway by which Charon came to occupy its present orbital state is uncertain. If Charon's orbit experienced a high-eccentricity phase, as suggested by some orbital evolution models, tidal effects would have likely been more significant. Therefore, we determine the conditions under which Charon could have experienced tidally-driven geologic activity and the extent to which upcoming New Horizons spacecraft observations could be used to constrain Charon's internal structure and orbital evolution. Using plausible interior structure models that include an ocean layer, we find that tidally-driven tensile fractures would likely have formed on Charon if its eccentricity were on the order of 0.01, especially if Charon were orbiting closer to Pluto than at present. Such fractures could display a variety of azimuths near the equator and near the poles, with the range of azimuths in a given region dependent on longitude; east-west-trending fractures should dominate at mid-latitudes. The fracture patterns we predict indicate that Charon's surface geology could provide constraints on the thickness and viscosity of Charon's ice shell at the time of fracture formation.

Tectonics↗

NASA NTRS1991

NASA's Magellan mission to Venus

At the end of its planned 243-day mission, by which time Venus will have completed a full rotation beneath Magellan's orbit, over 70 percent of the Venus surface shall have been mapped to high resolution; the volume of data thus obtained will exceed that from all previous U.S. planetary missions combined. An innovative SAR instrument will map Venus to an order-of-magnitude higher resolution than that possible with previous probes. Parameters controlling the spacing of SAR S-band pulses' transmission and reception, their number and frequency of repetition, etc., are changed as many as 300 times per mapping pass in order to accommodate the spacecraft's constantly varying orbital geometry.

Doody, Dave↗

NASA NTRS1990

Sensitivity studies of Mars orbiters for Mars gravity recovery

The purpose of the study is to assess the Mars orbiters with regard to their sensitivity to the Mars gravity field. The sensitivity is evaluated and quantified in terms of the magnitude and frequency of the orbiter position and velocity perturbations. The strengths and weaknesses of each orbiter, including Mariner 9, Viking 1 and 2, Mars Observer, Phobos, and Deimos, when used as a sensor of the Mars gravity field are assessed. It is shown that Mariner 9 and Viking data supply strong information on the low degree and order coefficients, with Mariner 9 contributing to the even-ordered terms out to about degrees 10 to 12. Phobos and Deimos are shown to be able to contribute to the lowest degrees of the gravity field, while the Mars Observer, in addition to the lower-degree and -order harmonics, will be responsive to coefficients as high as degree and order 50. Emphasis is placed on the spacecraft orbit plane orientation allowing the radial velocity perturbations to be measured by the Doppler data, thus enhancing the sensitivity to the gravitational signal.

Rosborough, George W.↗

NASA NTRS2018

Strategic Center for Networking, Integration, and Communications Orbit Propagation Front-End Software Development

Orbit propagation is fundamental for space-based mission analysis, requiring software tools to predict the time-based positions and velocities of orbiting satellites. Many system analysts currently rely on commercial software, which is effective but expensive. NASA’s Space Communications and Navigation (SCaN) Strategic Center for Networking, Integration, and Communications (SCENIC) project intends to provide these analysis capabilities by using a combination of internal and open-source software, allowing for a greater flexibility while maintaining low costs. Several routines were created to take different forms of user input to translate input into the standard set of orbital elements to be utilized within the current SCENIC analysis capabilities. These inputs range from two-line elements (TLEs) and Cartesian vectors, to coordinate transformations and Walker Delta constellations. These routines will be integrated into the SCENIC user interface (UI) in order to provide greater customization and flexibility for orbit propagation and other dynamic-analysis capabilities.

Kuhl, Nick↗

NASA NTRS1980

Satellite power system salvage and disposal alternatives

A wide range of salvage options for the SPS satellite, ranging from use in and beyond geosynchronous orbit to use in low Earth orbit in return and use on Earth are presented. The satellite can be used intact to provide power for various purposes, it can be cannibalized or it can be melted down to supply materials for space or ground based products. The use of SPS beyond its nominal lifetime provides value that can be deducted from the SPS capital investment cost. The present value of the salvage value of the SPS satellites, referenced to the system initial operation data, is on the order of five to ten percent of its on-orbit capital cost. (Given a 30 year satellite lifetime and a four percent discount rate, the theoretical maximum salvage value is 30.8 percent of the capital cost.) The SPS demonstration satellite is available some 30 years earlier than the first full scale SPS satellite and has a salvage value on the order of 80 percent of its on-orbit capital cost. In the event that it becomes desirable to dispose of either the demonstration of full scale SPS satellite, a number of disposal options is presented for which intact disposal costs are less than one percent of capital costs.

Source record↗

NASA NTRS1990

Spacecraft preliminary orbit determination using tracking measurements obtained from the Tracking and Data Relay Satellite System (TDRSS) and the Ground Spaceflight Tracking and Data Network (GSTDN)

In order to validate the operational and computational capabilities of the Preliminary Orbit Determination System (PODS), tests were performed using tracking measurements for several systems including the ERB satellite, the SMM, the STS and Landsat-4. POD procedures are utilized to generate a state vector following an unplanned orbital perturbation or spacecraft maneuver, when an estimation process such as a differential correction orbit determination cannot obtain a solution. Results are presented to demonstrate POD for several situations involving different qualities of a priori target state vectors, data type combinations, data arc lengths, and mixtures of single-TDRS, dual-TDRS, and GSTDN measurements. The system's ability to determine accurately the state vector for the spacecraft and the effectiveness of the solution screening process are discussed. It is shown that PODS is capable of determining a spacecraft vector when differential correction orbit determination processes fail.

Kirschner, S. M.↗

NASA NTRS2019

GOES-17 Magnetometer On-Orbit Calibration Design and Results

The Geostationary Operational Environmental Satellite-R (GOES-R) is a series of four NOAA weather satellites. Each spacecraft flies a Magnetometer instrument which includes two boom mounted fluxgate sensors located 6.3 and 8.5 meters from the spacecraft. Sensor readings are corrupted by both internal (bias and scale factor) and external (spacecraft emitted fields and misalignments) error sources. In order to estimate the bias, an on-orbit calibration is performed, slewing the spacecraft about multiple axes and then performing a fit of the data to determine zero offset and misalignment terms. The first satellite in the series, GOES-16 was launched in November 2016. Its magnetometer calibration maneuver was found to be inadequate providing insufficient rotation about orthogonal axes. The uncertainty in the estimated biases was found to be in the 3-5 nanotesla range, exceeding the magnetometer accuracy requirement of 1.0 nanotesla. Based on lessons learned, the maneuver was redesigned to provide multiple 360 degree rotations about two orthogonal axes, providing optimal visibility into bias and misalignment. Varying ambient fields over the duration of the calibration maneuvers, corrupts the ability to accurately determine parameters of interest. To address this issue, rather than assuming a constant field for the duration of the maneuver, a non-linear least squares filter was employed that uses a series of spline functions to better fit the ambient field. The number of splines can be varied to minimize the least squares filter residuals. Simulations were performed using 360 days of GOES-16 data to bound the uncertainty in the biases for given residuals of the fit to the ambient field. Following the launch of the second satellite in the series, GOES-17 in March 2018, the new calibration maneuver and enhanced bias estimation algorithm were exercised twice. Based on the residuals of the fit, the uncertainty of the estimated zero offset was reduced by an order of magnitude from 3-5 nanotesla to approximately 0.4 nanotesla per axis. This paper provides details of the maneuver design and the innovative algorithm used to estimate the GOES-17 biases and misalignments.

GOES-17↗

NASA NTRS2001

Testing Status of the X-38 Large Parafoil Autonomous GN and C System

This paper shall review the status, progress and results made in testing of the GN&C software and supporting avionics designed for the control of a large parafoil in support of the X-38 Program. This will include a high level overview of the GN&C design selected for use on the X-38 orbital return test article, as well as an overview of the requirements and test objectives for the parafoil flight portion of the orbital return flight, and of the testing results to date. These flight objectives will be mapped into flight and ground testing requirements and test beds currently in use by the X-38 Program, building sufficient confidence in the selected parafoil GN&C system, in order to proceed with the flight of the orbital test article. The X-38 Program itself is a NASA led technology development and demonstration program with its premier goal being the development and orbital return flight test of an emergency Crew Return Vehicle (CRV) prototype for the International Space Station.

Strahan, Alan↗

NASA NTRS1986

Towards a theory for Neptune's arc rings

It is proposed that the incomplete rings of Neptune consist of a number of short arcs centered on the corotation resonances of a single satellite. The satellite must have a radius of the order of 100 km or more and move on an inclined orbit. Corotation resonances are located at potential maxima. Thus, mechanical energy dissipated by interparticle collisions must be continually replenished to prevent the arcs from spreading. It is shown that each corotation resonance is associated with a nearby Lindblad resonance, which excites the ring particles' orbital eccentricity, thus supplying the energy required to maintain the arc. The ultimate energy reservoir is the satellite's orbital energy. Therefore, interaction with the arcs damps the satellite's orbital inclination. The self-gravity of the arcs limits their contraction and enforces a relation between arc length and mass. The estimated arc masses are so small, of the order of 10 to the 16th g, that the satellite's orbital inclination suffers negligible decay over the age of the solar system. The inferred surface mass densities are comparable to those found in the major rings of Saturn and Uranus.

Goldreich, P.↗