Temperature dependence of the long-wavelength optical phonons in diamond
Temperature effects on long wavelength photon frequency and linewidth in diamond, using Raman scattering techniques
Anastassakis, E.↗
SEARCH · Engineering Papers
Results for “optical frequency”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Airborne laser Doppler velocimeter
A CO2 laser Doppler detection system has been developed to measure remotely the true airspeed of an aircraft. The system uses a 50-W sealed-off CO2 laser in a homodyne detection system employing a collinear optical telescope, a HgCdTe detector, and a frequency tracking loop. The system was successfully flight-tested on a NASA Convair 990 research aircraft during December 1971 and June 1972. The results indicate that an airspeed measurement under clear weather conditions is feasible up to an altitude of 3000 m with an error of less than 0.5%.-
Munoz, R. M.↗
Optically selective, acoustically resonant gas detecting transducer
A gas analyzer is disclosed which responds to the resonant absorption or emission spectrum of a specific gas by producing an acoustic resonance in a chamber containing a sample of that gas, and which measures the amount of that emission or absorption by measuring the strength of that acoustic resonance, e.g., the maximum periodic pressure, velocity or density achieved. In the preferred embodiment, a light beam is modulated periodically at the acoustical resonance frequency of a closed chamber which contains an optically dense sample of the gas of interest. Periodic heating of the absorbing gas by the light beam causes a cyclic expansion, movement, and pressure within the gas. An amplitude is reached where the increased losses were the cyclic radiation energy received. A transducing system is inclined for converting the pressure variations of the resonant gas into electronic readout signals.
Dimeff, J.↗
Solar Power Satellite (SPS) fiber optic link assessment
A feasibility demonstration of a 980 MHz fiber optic link for the Solar Power Satellite (SPS) phase reference distribution system was accomplished. A dual fiber-optic link suitable for a phase distribution frequency of 980 MHz was built and tested. The major link components include single mode injection laser diodes, avalanche photodiodes, and multimode high bandwidth fibers. Signal throughput was demonstrated to be stable and of high quality in all cases. For a typical SPS link length of 200 meters, the transmitted phase at 980 MHz varies approximately 2.5 degrees for every deg C of fiber temperature change. This rate is acceptable because of the link length compensation feature of the phase control design.
Source record↗
Doppler-cancelled response to VLF gravitational waves
The interaction of long periodic gravitational waves with a three link microwave system known as the Doppler Cancelling System is discussed. This system, which was developed for a gravitational redshift experiment, uses one-way and two-way Doppler informatin to construct the beat signal of two reference oscillators moving with respect to each other. The geometric optics approximation is used to derive the frequency shift produced on a light signal propagating in a gravitational wave space-time. The signature left on the Doppler-cancelled beat by burst and continuous gravitational waves is analyzed. A comparison is made between the response to gravitational waves of the Doppler Cancelling System and that of a Doppler tracking system which employs two-way, round-trip radio waves. A three-fold repetition of the gravitational wave form is found to be a common feature of the response functions of both systems. These two functions otherwise exhibit interesting differences.
Caporali, A.↗
Radar investigation of asteroids
The dual polarization CW radar system which permits simultaneous reception in the same rotational sense of circular polarization as transmitted (i.e., the "SC" sense) and in the opposite ("OC") sense, was used to observe five previously unobserved asteroids: 2 Pallas, 8 Flora, 22 Kalliope, 132 Aethra, and 471 Papagena. Echoes from Pallas and Flora were easily detected in the OC sense on each of several nights. Weighted mean echo power spectra also show marginally significant responses in the SC sense. An approximately 4.5 standard deviation signal was obtained for Aethra. The Doppler shift of the peak is about 10 Hz higher than that predicted from the a priori trial ephemeris. Calculations are performed to determine whether this frequency offset can be reconciled dynamically with optical positions reported for Aethra.
Ostro, S. J.↗
Martian great dust storms - An update
Observations by the Viking Orbiters and Landers have made substantial contributions to an understanding of the episodic, planetary-scale dust storms on Mars. These and other observations pertinent to the great dust storms are reviewed in this paper; most of the emphasis is on the atmospheric/climatic aspects of these great storms. Specifically, observations concerning the optical properties of the airborne dust, the frequency of occurrence of great dust storms, and the kinematics of their evolution are summarized. Special attention is given to the various estimates derived from Viking data of atmospheric dust opacity. Within this observational framework, various physical mechanisms underlying the generation, evolution, and decay of the Martian great dust storms are discussed.
Zurek, R. W.↗
Response of a Doppler canceling system to plane gravitational waves
This paper discusses the interaction of long periodic gravitational waves with a three-link microwave system known as the Doppler canceling system. This system, which was developed for a gravitational red-shift experiment, uses one-way and two-way Doppler information to construct the beat signal of two reference oscillators moving with respect to each other. The geometric-optics approximation is used to derive the frequency shift produced on a light signal propagating in a gravitational-wave space-time. The signature left on the Doppler-cancelled beat by bursts and continuous gravitational waves is analyzed. A comparison is made between the response to gravitational waves of the Doppler canceling system and that of a (NASA) Doppler tracking system which employs two-way, round-trip radio waves. A threefold repetition of the gravitational wave form is found to be a common feature of the response functions of both systems. These two functions otherwise exhibit interesting differences.
Caporali, A.↗
Comment on the extinct paradox
The extinction paradox is a contradiction between geometrical optics results which predict that at high frequencies the scattering cross section of an object should equal its geometrical cross section and rigorous scattering theory which shows that at high frequencies the scattering cross section approaches twice the geometrical cross section of the object. Confusion about the reason for this paradox persists today even though the nature of the paradox was correctly identified many years ago by Brillouin. The resolution of the paradox is restated and illustrated with an example, and then the implications to the interpretation of scattering cross sections are identified.
Levine, D. M.↗
Great microwave bursts and hard X-rays from solar flares
In the present study of the microwave and hard X-ray characteristics of 13 solar flares emitting microwave fluxes greater than 500 solar flux units, simultaneous 3-35 GHz and hard X-ray observations were conducted in the 30-500 keV energy range. An analysis is conducted to determine whether the same distribution of energetic electrons can explain both emissions; tests for any correlations between them yield results suggesting that optically thick microwave emission, near the peak frequency, originates in the same electron population that produces the hard X-rays. A single temperature model and a multitemperature model were tested for consistency with the coincident X-ray and microwave spectra at microwave burst maximum; neither model, however, attempts to explain the high frequency component of the microwave spectrum.
Wiehl, H. J.↗
Short baseline phase delay interferometry
The high precision of the phase delay data type allows angular navigation accuracy on relatively short baselines to compete with the angular accuracy achieved with long baseline group delay measurements. Differential phase delay observations of close quasar pairs on both a 5.9-km baseline (DSS 12-DSS 13) and a 253-km baseline (DSS 13-Owens Valley Radio Observatory) have been performed to study the potential navigational precision and accuracy of the short baseline interferometry. As a first step toward demonstration of a connected element system at Goldstone, the DSS 12-DSS 13 baseline was operated coherently, distributing a common frequency reference via a recently installed fiber optic cable. The observed phase delay residuals of about 10 psec or less on both baselines appear to be dominated by short term troposphere fluctuations, and correspond to navigational accuracies of well below 50 nrad for the 253-km baseline. Additional experiments will be required to probe the full range of systematic errors.
Edwards, C. D.↗
An ac bridge readout for bolometric detectors
The authors have developed a bolometer readout circuit which greatly improves the low-frequency stability of bolometric detectors. The circuit uses an ac bias voltage and two matched bolometers and allows stable dc bolometer operation for integration times greater than 10 s. In astronomical applications the readout allows for qualitatively different observation modes (e.g. staring or slow-drift scanning) which are particularly well suited for space observations and for the use of arrays. In many applications the readout can increase sensitivity. The authors present noise spectra for 4He temperature bolometers with no excess noise at frequencies greater than 0.1 Hz. The measured optical responsivity of a bolometer operated with the present readout is the same as that of a bolometer operated with a conventional readout.
Rieke, F. M.↗
Fiberoptics for liquid propellant rocket engine environments
Interest is increasing in the use of fiberoptics on liquid-fueled rocket engines in recognition of their immunity to lightning and EMI, light weight, high-frequency response, and the possibility offered by optical technologies to measure additional important engine parameters for which present measurement methods are impractical. This paper discusses the requirements to be placed on fiberoptics applied to liquid-fueled rocket engines; identifies manufacturers of fibers that appear to have promise for the harsh rocket engine applications; and summarizes information on the characteristics of these fibers obtained from the manufacturers, program testing, and the general literature.
Delcher, R.↗
Progress in high temperature speckle-shift strain measurement system
A fast, easy to use speckle tracking system is under development for the speckle-shift strain measurement technique. Preliminary correlation tests on wire specimens show strong correlations of well-developed speckle patterns. Stable cross-correlations were obtained from a tungsten filament at 2480 C. An analysis of the optical system determines the minimum required sampling frequency of the speckle pattern to be 2.55 pixels per speckle.
Lant, Christian T.↗
High-mass star formation in southern disk galaxies
As part of a major study of the physical processes of star formation and the evolution of galactic discs, the detailed distribution of high-mass star formation within southern late-type spirals and Magellanic-type galaxies is being measured by means of narrow-band imaging in Ha and the continuum, spectroscopic studies of prominent HII regions identified in the Ha images, and by radio mapping in neutral hydrogen and the continuum. The radio mapping will be undertaken with the Southern Hemisphere's first large, multi-frequency synthesis array, the Australia Telescope. Some optical imaging and spectroscopic data has already been acquired; the optical data and some preliminary results are described.
Dopita, Michael A.↗
Raman scattering of InGaAs/InP grown by uniform radial flow epitaxy
Uniform radial flow epitaxy, a novel growth technique, has been used to grown InGaAs films on InP. Epitaxial layers above and below the critical thickness for the onset of slip were grown. Raman spectroscopy was used to characterize the quality of epitaxial layers, determine alloy composition, and measure the strain. Raman spectra from both pseudomorphic (strained) and relaxed (unstrained) InGaAs films were obtained at 300 and 80 K. The difference in the frequencies of their GaAs-like longitudinal optical phonons was used to calculate stress for the strained InGaAs/InP, leading to a direct formula for the evaluation of the layer stress.
Feng, Z. C.↗
Method of forming silicon structures with selectable optical characteristics
Silicon and metal are coevaporated onto a silicon substrate in a molecular beam epitaxy system with a larger than stoichiometric amount of silicon so as to epitaxially grow particles of metal silicide embedded in a matrix of single crystal epitaxially grown silicon. The particles interact with incident photons by resonant optical absorption at the surface plasmon resonance frequency. Controlling the substrate temperature and deposition rate and time allows the aspect ratio of the particles to be tailored to desired wavelength photons and polarizations. The plasmon energy may decay as excited charge carriers or phonons, either of which can be monitored to indicate the amount of incident radiation at the selected frequency and polarization.
Fathauer, Robert W.↗
Optical detector having a plurality of matrix layers with cobalt disilicide particles embedded therein
Silicon and metal are coevaporated onto a silicon substrate in a molecular beam epitaxy system with a larger than stoichiometric amount of silicon so as to epitaxially grow particles of metal silicide embedded in a matrix of single crystal epitaxially grown silicon. The particles interact with incident photons by resonant optical absorption at the surface plasmon resonance frequency. Controlling the substrate temperature and deposition rate and time allows the aspect ratio of the particles to be tailored to desired wavelength photons and polarizations. The plasmon energy may decay as excited charge carriers of phonons, either of which can be monitored to indicate the amount of incident radiation at the selected frequency and polarization.
Fathauer, Robert W.↗