Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanocomposite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Platinum-complexed phosphorous-doped carbon nitride for electrocatalytic hydrogen evolution

Sustainable hydrogen gas production is critical for future fuel infrastructure. Here, a series of phosphorous-doped carbon nitride materials were synthesized by thermal annealing of urea and ammonium hexafluorophosphate, and platinum was atomically dispersed within the structural scaffold by thermal refluxing with Zeise's salt forming Pt–N/P/Cl coordination interactions, as manifested in X-ray photoelectron and absorption spectroscopic measurements. The resulting materials were found to exhibit markedly enhanced electrocatalytic activity towards the hydrogen evolution reaction (HER) in acidic media, as compared to the P-free counterpart. This was accounted for by P doping that led to a significantly improved charge carrier density within C 3 N 4 , and the sample with the optimal P content showed an overpotential of only –22 mV to reach the current density of 10 mA cm –2 , lower than that of commercial Pt/C (–26 mV), and a mass activity (7.1 mA μg –1 Pt at –70 mV vs. reversible hydrogen electrode) nearly triple that of the latter. Finally, results from the present study highlight the significance of P doping in the manipulation of the electronic structures of metal/carbon nitride nanocomposites for high-performance HER electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Li–Mn–O Li-rich cation disordered rock-salt cathode materials do not undergo reversible oxygen redox during cycling

An in-depth study of “Li 4 Mn 2 O 5 ”, a nanocomposite of Li 2 O and Li 4-x Mn 2 O 5 with a disordered rock salt structure (LMO), was conducted to determine the origins of the observed anomalously high charge and discharge capacity in lithium cells, which can exceed 350 mA h g -1 . Using soft and hard X-ray absorption spectroscopy (XAS), mapping of resonant inelastic X-ray scattering (mRIXS), and X-ray Raman spectroscopy (XRS), it was determined that electrochemical decomposition of Li 2 O upon charge and reduction of Mn to below 3+ during discharge is responsible for the capacities that are observed, with no evidence of contributions from reversible oxygen redox. Here, the over-reduction is exacerbated when charging limits of 4.5–4.8 V are used due to side reactions between electrolytic solution and the highly oxidized active material. These side reactions result in dissolution of Mn at room temperature and release of oxygen and other gases during initial cycles, which, in turn, cause rapid capacity fading. This is accompanied by evolution of the voltage profile upon cycling towards one that resembles that of manganese oxide spinels. The cycling behavior can be improved somewhat by reducing the upper voltage limit, although this results in a diminishment of the discharge capacities below 200 mA h g -1 . By adding various amounts of spinel LiMn 2 O 4 during synthesis, it was possible to produce LMOs with rock salt structures having significantly improved cycling behavior but still having capacities in excess of 250 mA h g -1 . An optimized modified material also exhibits better rate capability and much less gas evolution during initial cycles than the unmodified LMO. Interestingly, as-made modified materials generally exhibited lower than expected average Mn oxidation states attributable to oxygen loss during the synthesis process, as well as higher capacities than expected based on their manganese contents. The oxygen loss during processing may reduce the activity of the remaining oxygen and account for the lower reactivity of the spinel-modified material.

25 ENERGY STORAGE↗
DOE OSTI2024

Room temperature chemical transformation of SnSe to Ag 2 Se nanocrystals via cation exchange

Atomic-scale control of the chemical composition of semiconductor nanocrystals through a cation exchange reaction affords greater tunability in the design of multifunctional semiconductor composite nanocrystals. Here, we report a facile route to SnSe–Ag 2 Se composite nanocrystals using cation exchange at room temperature. Starting from freshly synthesized SnSe nanorods, we leverage the strong distortion of the Sn 2+ octahedral coordination in SnSe and the hard–soft acid–base (HSAB) principle, to promote the exchange of an Sn 2+ ion with two Ag + ions in methanol leading to Ag 2 Se/SnSe nanocomposites. The morphology and chemistry of the nanocrystals evolve from nanorods with SnSe@Ag 2 Se (core@shell) structures for SnSe-rich composites to nanorods with a random distribution of Sn 2+ and Ag + ions for nearly equimolar composites, and finally to irregular fragmented nanocrystals for Ag 2 Se-rich composites. A mechanistic understanding of the observed morphology evolution is discussed using the change in the cation coordination from octahedral (Sn 2+ ) to tetrahedral (Ag + ) geometry and the accompanying expansion of the hcp Se 2– sublattice. Interestingly, the synthesized composite nanocrystals exhibit an optical band gap value tunable within a wide energy range by increasing the Ag 2 Se/SnSe ratio. This work provides a useful and facile strategy to modify the optical behavior of semiconductor nanomaterials, which can be leveraged for the design of better optical and/or photovoltaic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Integrating magnetic Co-nanopillars in a NbN-based VAN thin film as a multifunctional hybrid metamaterial

NbN thin films are considered as a promising alternative candidate to conventional Al superconducting electrodes for Josephson junction devices, superconducting qubits and quantum logic circuits. Herein, by co-growing ferromagnetic Co with superconducting NbN, self-assembled NbN–Co vertically aligned nanocomposite (VAN) thin films have been successfully deposited on a MgO substrates, with NbN in its cubic superconducting phase. The obtained VAN metamaterials exhibit epitaxial growth of NbN with uniformly dispersed Co nanoplates. Further physical property characterization reveals that the NbN–Co VAN presents ferromagnet properties with strong out-of-plane magnetic anisotropy and optical anisotropy. This hybrid metamaterial system could find future applications in superconducting spintronic devices and quantum computing devices.

Zhang, Yizhi [Purdue Univ., West Lafayette, IN (Un↗
DOE OSTI2024

Towards predictive control of reversible nanoparticle assembly with solid-binding proteins

Although a broad range of ligand-functionalized nanoparticles and physico-chemical triggers have been exploited to create stimuli-responsive colloidal systems, little attention has been paid to the reversible assembly of unmodified nanoparticles with non-covalently bound proteins. Previously, we reported that a derivative of green fluorescent protein engineered with oppositely located silica-binding peptides mediates the repeated assembly and disassembly of 10-nm silica nanoparticles when pH is toggled between 7.5 and 8.5. We captured the subtle interplay between interparticle electrostatic repulsion and their protein-mediated short-range attraction with a multiscale model energetically benchmarked to collective system behavior captured by scattering experiments. Here, in this work, we show that both solution conditions (pH and ionic strength) and protein engineering (sequence and position of engineered silica-binding peptides) provide pathways for reversible control over growth and fragmentation, leading to clusters ranging in size from 25 nm protein-coated particles to micrometer-size aggregate. We further find that the higher electrolyte environment associated with successive cycles of base addition eventually eliminates reversibility. Our model accurately predicts these multiple length scales phenomena. The underpinning concepts provide design principles for the dynamic control of other protein- and particle-based nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Low-temperature MnBi alloys: Electronic and magnetic properties, constitution, morphology and fabrication (Review article)

The article reviews the rich phenomena of physical properties of MnBi. The diverse phenomena include strong spin-orbit interaction, anomalous temperature dependence of the coercivity and the magneto-crystalline anisotropy field, unique magneto-optical properties. Issues addressed include the nature of the electronic ground states of MnBi, the electronic and magnetic structures, Fermi surface, magneto-crystalline anisotropy, x-ray magnetic dichroism. The discussion includes key experiments, such as optical and magneto-optical spectroscopic measurements, de Haas-van Alphen (dHvA) measurements, x-ray photoemission and x-ray absorption spectroscopy measurements as well as x-ray magnetic circular dichroism. The effect of the spin-orbit (SO) interaction and Coulomb repulsion U were found to be crucial for the Fermi surface, cyclotron masses, magneto-optical properties, and x-ray magnetic circular dichroism. The microscopic origin of unique magneto-crystalline anisotropy and giant Kerr effect in MnBi is analyzed in detail. The huge Kerr effect in MnBi is caused by the combination of a sizable magnetic moment on manganese, the large spin-orbit coupling of bismuth, and a strong hybridization between the manganese 3d and the bismuth 6p states. The magneto-optically active states are mainly the 6p states of Bi. We show that the observed temperature dependence of the magneto-crystalline anisotropy can be explained taking into account the spin-orbit interaction together with strong Coulomb electron-electron interaction. The SO coupling of Bi is equally responsible for the large magneto-crystalline anisotropy energy as is the exchange splitting of Mn. The fabrication, morphology, and constitution of low-temperature MnBi alloys in bulk, thin films, and nanoparticles are discussed. The nanocomposite permanent magnetic materials based on MnBi, (Co, Fe) and Nd 2 Fe 14 B are also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Room temperature multiferroicity and magnetodielectric coupling in 0–3 composite thin films

Magnetoelectric (ME) composite thin films are promising candidates for novel applications in future nanoelectronics, spintronics, memory and other multifunctional devices as they exhibit much higher ME coupling and transition temperatures (Tc) than well-known single phase multiferroics discovered to date. Among the three types of multiferroic composite nanostructures, (2-2) layered and (1-3) vertically aligned composite nanostructures exhibit comparatively smaller ME coupling due to different shortcomings which restrict their use in many applications. Here we study the morphological, piezoresponse force microscopic (PFM), ferroelectric, magnetic, and magnetodielectric properties of 0-3 (magnetic nanoparticles (0) homogeneously distributed in ferroelectric matrices (3)) multiferroic composite thin films. The Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) - Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO) particulate composite films were synthesized by pulsed laser deposition (PLD). These particulate composite thin films are completely c-axis oriented with very low surface roughness. We observed magnetic and ferroelectric T c above room temperature (RT) for all composite thin films. The PFN-NZFO 0-3 composites exhibit large polarization, high saturated magnetization with low coercive field, low dielectric loss along with magnetodielectric coupling at RT. These nanocomposites might be utilized in next generation nano/microelectronics and spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cobalt ferrite nanoparticle intercalated carbon nanotubes for a nanomagnetic ultrasensitive sensor of Cr-VI in water

Nanocomposites of cobalt ferrite (CFO) magnetic nanoparticles intercalated on carbon nanotubes (CNTs) are evaluated as a nanomagnetic ultrasensitive sensor for the environmental toxin, hexavalent chromium (Cr-VI). Specifically, the structural and magnetic changes that accompany the infiltration of the CFO/CNTs by Cr-VI are presented. Extended x-ray absorption fine structure (EXAFS) shows that the atomic spacing within the CFO structure changes in the presence of Cr, suggesting that the Cr is incorporated into the nanoparticles. Vibrating sample magnetometry (VSM) reveals that CFO/CNTs composite infiltrated with Cr-VI have a 71% enhancement in saturation magnetization compared with the uninfiltrated CFO/CNTs, while small-angle neutron scattering (SANS) suggests that this magnetic enhancement is not associated with the nanoparticle lengthscales, but may arise from longer-ranged clusters. Both VSM and SANS clearly demonstrate that the Cr-doped CFO/CNTs are hysteretic with a net magnetization at remanence that is about 1/3 that of saturation, while this hysteresis is absent in the undoped CFO/CNTs. These magnetic differences at either remanence or saturation are promising for the magnetic detection of Cr-VI using CFO/CNTs sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Substrate oxygen sponge effect: A parameter for epitaxial manganite thin film growth

The emergent phenomena in complex oxide thin films are strongly tied to the oxygen content, which is often engineered by the oxygen partial pressure during growth. However, such oxygen control by the growth pressure is challenging to synthesize for some oxide films, which requires a subtle control of the oxygen content. A parameter of controlling the oxygen content independent of the growth pressure is desired. Here, we propose a method of controlling the oxygen content of films by engineering the substrate before the growth. The oxide substrate serves as an oxygen sponge, which provides a tunable oxygen environment ranging from oxygen-rich to oxygen-poor for the film growth, depending on the pre-substrate annealing (PSA) conditions. Using manganite as a model system, we demonstrate that this simple PSA method leads to remarkable changes in the structure and physical properties of the as-grown films. Finally, this substrate oxygen sponge effect, driven by the large oxygen concentration gradient at high temperatures, can be applied to explore not only emergent interfacial phenomena but also the growth of a variety of functional oxide thin films and nanocomposites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hole doping in compositionally complex correlated oxide enables tunable exchange biasing

Magnetic interfaces and the phenomena arising from them drive both the design of modern spintronics and fundamental research. Recently, it was revealed that through designing magnetic frustration in configurationally complex entropy stabilized oxides, exchange bias can occur in structurally single crystal films. This eliminates the need for complex heterostructures and nanocomposites in the design and control of magnetic response phenomena. In this work, we demonstrate through hole doping of a high entropy perovskite oxide that tuning of magnetic responses can be achieved. With detailed magnetometry, we show magnetic coupling exhibiting a variety of magnetic responses including exchange bias and antiferromagnetic spin reversal in the entropy stabilized ABO 3 perovskite oxide La 1-x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 family. We find that manipulation of the A-site charge state can be used to balance magnetic phase compositions and coupling responses. This allows for the creation of highly tunable exchange bias responses. In the low Sr doping regime, a spin frustrated region arising at the antiferromagnetic phase boundary is shown to directly couple to the antiferromagnetic moments of the film and emerges as the dominant mechanism, leading to a vertical shift of magnetization loops in response to field biasing. At higher concentrations, direct coupling of antiferromagnetic and ferromagnetic regions is observed. This tunability of magnetic coupling is discussed within the context of these three competing magnetic phases, revealing critical features in designing exchange bias through exploiting spin frustration and disorder in high entropy oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A DFT-based kinetic Monte Carlo simulation of multiphase oxide-metal thin film growth

Functional thin films of nanoscale metal pillars in oxide or nitride matrices known as vertically aligned nanocomposite (VAN) have gained much interest owing to their unique strain-coupled and highly anisotropic properties. So far, the deposition of these films has been explored mostly experimentally. In this work, a density functional theory (DFT)-based kinetic Monte Carlo simulation model using Bortz–Kalos–Lebowitz algorithm was developed to understand the growth of VAN films deposited by pulsed laser technique on mismatching substrates. The model has been parameterized and applied to understand the kinetics of growth thin films consisting of Au pillars in CeO2 matrix deposited on SrTiO3 substrates. The effects of pulsed laser deposition (PLD) conditions including the pulse frequency, deposition flux, and substrate temperature were explored. The simulations indicate that the Au pillar size and shape exhibit significant dependence on the PLD conditions. Namely, increasing the temperature increases the average pillar size and lowers the pillar density, and vice versa. In addition, the simulations revealed that increasing the deposition rate results in lowering the average pillar size and increasing the density. Particularly, the DFT results suggest that Au pillar size can be tuned during the initial growth of the first monolayer due to the significantly low activation barrier. Our analysis showed that the relationship between the average pillar size and pillar density is influenced by the kinetics. Furthermore, autocorrelation analysis showed that pillars self-organize in quasi-ordered patterns at certain windows of the deposition conditions, which is attributed to the complex nature of the chemical interactions in the system, the kinetics, and the deposition parameters.

Physics↗
DOE OSTI2024

A new class of single-phase multiferroics: Bismuth-based layered supercell oxide thin films—Current progress and future perspectives

Multiferroic materials, where ferroelectric and magnetic orders coexist, have ignited substantial research interest due to the achievable manipulation of magnetic orders using external electric fields, a feature that has garnered serious interest for memory storage applications. Nonetheless, naturally occurring single-phase multiferroic materials are scarce, thus constraining options for practical use. Over the last decade, bismuth-based layered supercell (LSC) oxides have emerged as novel candidates for multiferroics, catalyzing extensive investigations in this domain. Additionally, these LSC systems are known for their anisotropic structures and optical properties, making them promising for application in optics such as polarizers, beam splitters, and modulators. This thorough review explores the development and current advancements in multiferroic bismuth-based LSC materials. It covers the diverse nature of LSCs, detailing their microstructure, properties, and the mechanics of self-assembly formation. It also highlights the remarkable multifunctional characteristics of LSC-based nanocomposites, with a particular focus on their applications in electronics and optics. Moreover, this review examines the significant potential of LSCs in practical applications, particularly through their integration onto silicon and flexible substrates via heteroepitaxy and film transfer techniques. Finally, it offers insights into potential future research avenues and the broader implications of these versatile LSC materials.

Materials Science↗
DOE OSTI2022

Nanosynthesis by atmospheric arc discharges excited with pulsed-DC power: a review

Plasma technology is actively used for nanoparticle synthesis and modification. All plasma techniques share the ambition of providing high quality, nanostructured materials with full control over their crystalline state and functional properties. Pulsed-DC physical/chemical vapour deposition, high power impulse magnetron sputtering, and pulsed cathodic arc are consolidated low-temperature plasma processes for the synthesis of high-quality nanocomposite films in vacuum environment. However, atmospheric arc discharge stands out thanks to the high throughput, wide variety, and excellent quality of obtained stand-alone nanomaterials, mainly core–shell nanoparticles, transition metal dichalcogenide monolayers, and carbon-based nanostructures, like graphene and carbon nanotubes. Unique capabilities of this arc technique are due to its flexibility and wide range of plasma parameters achievable by modulation of the frequency, duty cycle, and amplitude of pulse waveform. The many possibilities offered by pulsed arc discharges applied on synthesis of low-dimensional materials are reviewed here. Periodical variations in temperature and density of the pulsing arc plasma enable nanosynthesis with a more rational use of the supplied power. Parameters such as plasma composition, consumed power, process stability, material properties, and economical aspects, are discussed. Lastly a brief outlook towards future tendencies of nanomaterial preparation is proposed. Atmospheric pulsed arcs constitute promising, clean processes providing ecological and sustainable development in the production of nanomaterials both in industry and research laboratories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Electronic surface reconstruction of TiO 2 nanocrystals revealed by resonant inelastic x-ray scattering

The identification of lattice multiphases in TiO 2 nanocrystals is studied by high resolution transmission electron microscope and electron diffraction patterns. Based on the spectroscopic analysis using soft x-ray absorption and resonant inelastic soft x-ray scattering, it is believed that the oxygen vacancies at the interface exhibit structural distortion of the TiO$^{8-}_6$ cluster around the defect site as for the multiphase lattice. We elucidate that the extra 3d electrons nearby induce the inelastic scattering features with the excitation energy dependence owing to different energy relaxation processes, a characteristic of the electron-phonon coupling or the nature of the electron-hole pair at the intermediate state. The manifold dd excitations driven by the strong interaction between Ti-3d and O-2p electrons are noticeably rich, coexisting on both Ti and O sites. Finally, this sophisticated experiment can advance the perspective of nanocomposite TiO 2 for various interactions of surface Ti 3+ in applications of future devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Designing hierarchical nanoporous membranes for highly efficient gas adsorption and storage

Nanoporous membranes with two-dimensional materials such as graphene oxide have attracted attention in volatile organic compounds (VOCs) and H 2 adsorption because of their unique molecular sieving properties and operational simplicity. However, agglomeration of graphene sheets and low efficiency remain challenging. Therefore, we designed hierarchical nanoporous membranes (HNMs), a class of nanocomposites combined with a carbon sphere and graphene oxide. Hierarchical carbon spheres, prepared following Murray’s law using chemical activation incorporating microwave heating, act as spacers and adsorbents. Hierarchical carbon spheres preclude the agglomeration of graphene oxide, while graphene oxide sheets physically disperse, ensuring structural stability. The obtained HNMs contain micropores that are dominated by a combination of ultramicropores and mesopores, resulting in high VOCs/H 2 adsorption capacity, up to 235 and 352 mg/g at 200 ppmv and 3.3 weight % (77 K and 1.2 bar), respectively. Our work substantially expands the potential for HNMs applications in the environmental and energy fields.

42 ENGINEERING↗