SEARCH · Engineering Papers

Results for “microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

DOE OSTI2013

Lattice mismatch-induced evolution of microstructural properties in FePt films

FePt (10, 20, 40, and 60 nm) films were fabricated on four different single crystal substrates [MgO (001), KTaO{sub 3} (001), SrTiO{sub 3} (001), and LaAlO{sub 3} (001)], and the effects of lattice mismatch on the microstructure and magnetic properties of FePt films were systematically investigated. The X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) results showed that the different lattice mismatch between the substrates and FePt films resulted in the different crystallographic texture and microstructure of the FePt films. Under the tensile strain between the FePt and substrates (MgO, KTaO{sub 3}, SrTiO{sub 3}), the FePt films preferred to form L1{sub 0} FePt (001) texture. The perpendicular anisotropy of the FePt films grown on MgO was larger than that grown on KTaO{sub 3} and SrTiO{sub 3}. For the FePt films grown on the LaAlO{sub 3} substrate, both FePt (110) and (001) orientations were found, which indicated the presence of tensile and compressive strain, respectively. With the reduction of the lattice mismatch between the FePt (10 nm) and substrate from 5.8% (MgO) to 2.4% (KTaO{sub 3}), and 0.1% (SrTiO{sub 3}), the microstructure of the FePt films changed gradually from granular to continuous films (SEM and TEM results). The microstructure of the 10 nm FePt film grown on LaAlO{sub 3} substrate showed granular structure.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Understanding the phase transformation mechanisms that affect the dynamic response of Fe-based microstructures at the atomic scales

Large-scale molecular dynamics (MD) simulations were carried out to investigate the shock-induced evolution of microstructure in Fe-based systems comprising single-crystal and layered Cu/Fe alloys with a distribution of interfaces. The shock compression of pure single-crystal Fe oriented along [110] above a threshold pressure results in a BCC (α)→HCP (ε) phase transformation behavior that generates a distribution of ε phase variants in the phase transformed region of the microstructure behind the shock front. The propagation of the release wave through a phase transformed ε phase causes a reverse ε→α phase transformation and renders a distribution of twins for the [110] oriented Fe that serve as void nucleation sites during spall failure. The simulations reveal that the α→ε→α transformation-induced twinning for shock loading along the [110] direction is due to a dominant ε phase variant formed during compression that rotates on the arrival of the release wave followed by a reverse phase transformation to twins in the α phase. The modifications in the evolution of the ε phase variants and twins in Fe behavior are also studied for Cu–Fe layered microstructures due to the shock wave interactions with the Cu/Fe interfaces using a newly constructed Cu–Fe alloy potential. Here, the MD simulations suggest that interfaces affect the observed variants during shock compression and, hence, distributions of twins during shock release that affects the void nucleation stresses in the Fe phase of Cu/Fe microstructures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Preliminary benchmarks and analysis of boundary conditions in a trenched microstructured silicon radiation detector

Microstructured neutron detectors have the benefit of enhanced neutron detection efficiency as compared to planar devices, achieved by etching 6 LiF-filled trenches on the top surface of a silicon PIN diode. This sensor geometry results in a complex electric field distribution and depletion characteristics within the diode under reverse bias. For the first time on record, the effects of a fixed oxide charge on the microstructured device depletion characteristics and mobile carrier transport is investigated. Prototype detectors were fabricated with non-conformal surface doping. Capacitance voltage and current voltage measurements were performed for these prototypes and compared with COMSOL Multiphysics simulations. A spectral response from an 241Am alpha particle source was acquired and analyzed. It was found that monoenergetic alpha particles produce three prominent peaks in the pulse height spectrum output by the device. The peaks were confirmed by simulations to correlate with dead layers and incident trajectories into the microstructure. It was also found that significant differences in pulse rise time result, corresponding with events arriving in a low-field region in the fins and a high-field region in the bulk. Geant4 was utilized for radiation transport, interaction modeling, and benchmarking the spectral data. The results of this simulation work provide confidence in the ability to attain and benchmark electrical characteristics and spectral data for semiconductor radiation detectors employing complex microstructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

In situ study of microstructure evolution and α → ω phase transition in annealed and pre-deformed Zr under hydrostatic loading

The detailed study of the effect of the initial microstructure on its evolution under hydrostatic compression before, during, and after the irreversible α → ω phase transformation and during pressure release in Zr using in situ x-ray diffraction is presented. Two samples were studied: one is plastically pre-deformed Zr with saturated hardness and the other is annealed. Phase transformation α → ω initiates at lower pressure for a pre-deformed sample but for a volume fraction of ω Zr, c > 0.7, a larger volume fraction is observed for the annealed sample. This implies that the proportionality between the athermal resistance to the transformation and the yield strength in the continuum phase transformation theory is invalid; an advanced version of the theory is outlined. Phenomenological plasticity theory under hydrostatic loading is outlined in terms of microstructural parameters, and plastic strain is estimated. During transformation, the first rule is suggested, i.e., the average domain size, microstrain, and dislocation density in ω Zr for c < 0.8 are functions of the volume fraction, c of ω Zr only, which are independent of the plastic strain tensor prior to transformation and pressure. The microstructure is not inherited during phase transformation. Surprisingly, for the annealed sample, the final dislocation density and the average microstrain after pressure release in the ω phase are larger than for the severely pre-deformed sample. The results suggest that an extended experimental basis is required for the predictive models for the combined pressure-induced phase transformations and microstructure evolutions.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Phase-field modeling of aging-induced microstructure evolution in pentaerythritol tetranitrate thin films and ramifications for shock initiation

Aging of energetic materials may change performance and affect their safety and reliability, but the relationship between microstructure changes induced by aging and consequent performance changes has not been fully established. This work presents results of phase-field method simulations used to model microstructure evolution of vapor-deposited pentaerythritol tetranitrate (PETN) thin films. Simulated aging is shown to induce grain coarsening and substantial changes of the configuration of porosity in the film: Specifically, we show that porosity tends to concentrate in large pores to a greater degree in aged films, a state that is arrived at by closure or consolidation of small pores. To evaluate the performance of the as-deposited and aged films, we perform two-dimensional hydrocode flyer-film impact simulations that incorporate the phase-field output microstructures directly, permitting us to connect features therein to changes in reactivity, a key metric of energy output for shock initiation. The results demonstrate that declining sensitivity obtained for the simulated aged films can be correlated with the loss of fine-structured pores relatively early in the aging process, while long-term microstructure evolution that gradually alters the shape of large, branching pores is less impactful. Finally, we discuss commonalities and discrepancies between our simulation results and high-throughput initiation experiments on shock initiation of aged PETN thin films.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Multiresponsive polymeric microstructures with encoded predetermined and self-regulated deformability

Dynamic functions of biological organisms often rely on arrays of actively deformable microstructures undergoing a nearly unlimited repertoire of predetermined and self-regulated reconfigurations and motions, most of which are difficult or not yet possible to achieve in synthetic systems. Here, we introduce stimuli-responsive microstructures based on liquid-crystalline elastomers (LCEs) that display a broad range of hierarchical, even mechanically unfavored deformation behaviors. By polymerizing molded prepolymer in patterned magnetic fields, we encode any desired uniform mesogen orientation into the resulting LCE microstructures, which is then read out upon heating above the nematic–isotropic transition temperature (T N–I ) as a specific prescribed deformation, such as twisting, in- and out-of-plane tilting, stretching, or contraction. By further introducing light-responsive moieties, we demonstrate unique multifunctionality of the LCEs capable of three actuation modes: self-regulated bending toward the light source at T < T N–I , magnetic-field–encoded predetermined deformation at T > T N–I , and direction-dependent self-regulated motion toward the light at T > T N–I . We develop approaches to create patterned arrays of microstructures with encoded multiple area-specific deformation modes and show their functions in responsive release of cargo, image concealment, and light-controlled reflectivity. We foresee that this platform can be widely applied in switchable adhesion, information encryption, autonomous antennae, energy harvesting, soft robotics, and smart buildings.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Process-dependent anisotropic thermal conductivity of laser powder bed fusion AlSi10Mg: impact of microstructure and aluminum-silicon interfaces

Purpose AlSi10Mg alloy is commonly used in laser powder bed fusion due to its printability, relatively high thermal conductivity, low density and good mechanical properties. However, the thermal conductivity of as-built materials as a function of processing (energy density, laser power, laser scanning speed, support structure) and build orientation, are not well explored in the literature. This study aims to elucidate the relationship between processing, microstructure, and thermal conductivity. Design/methodology/approach The thermal conductivity of laser powder bed fusion (L-PBF) AlSi10Mg samples are investigated by the flash diffusivity and frequency domain thermoreflectance (FDTR) techniques. Thermal conductivities are linked to the microstructure of L-PBF AlSi10Mg, which changes with processing conditions. The through-plane exceeded the in-plane thermal conductivity for all energy densities. A co-located thermal conductivity map by frequency domain thermoreflectance (FDTR) and crystallographic grain orientation map by electron backscattered diffraction (EBSD) was used to investigate the effect of microstructure on thermal conductivity. Findings The highest through-plane thermal conductivity (136 ± 2 W/m-K) was achieved at 59 J/mm 3 and exceeded the values reported previously. The in-plane thermal conductivity peaked at 117 ± 2 W/m-K at 50 J/mm 3 . The trend of thermal conductivity reducing with energy density at similar porosity was primarily due to the reduced grain size producing more Al-Si interfaces that pose thermal resistance. At these interfaces, thermal energy must convert from electrons in the aluminum to phonons in the silicon. The co-located thermal conductivity and crystallographic grain orientation maps confirmed that larger colonies of columnar grains have higher thermal conductivity compared to smaller columnar grains. Practical implications The thermal properties of AlSi10Mg are crucial to heat transfer applications including additively manufactured heatsinks, cold plates, vapor chambers, heat pipes, enclosures and heat exchangers. Additionally, thermal-based nondestructive testing methods require these properties for applications such as defect detection and simulation of L-PBF processes. Industrial standards for L-PBF processes and components can use the data for thermal applications. Originality/value To the best of the authors’ knowledge, this paper is the first to make coupled thermal conductivity maps that were matched to microstructure for L-PBF AlSi10Mg aluminum alloy. This was achieved by a unique in-house thermal conductivity mapping setup and relating the data to local SEM EBSD maps. This provides the first conclusive proof that larger grain sizes can achieve higher thermal conductivity for this processing method and material system. This study also shows that control of the solidification can result in higher thermal conductivity. It was also the first to find that the build substrate (with or without support) has a large effect on thermal conductivity.

Engineering↗

DOE OSTI2012

Fabrication of Very-High-Aspect-Ratio Microstructures in Complex Patterns by Photoelectrochemical Etching

We have fabricated very-high-aspect-ratio (VHAR) silicon and metal microstructures in complex geometric patterns. The recently developed surfactant-added tetramethylammonium hydroxide etching allows the formation of V-grooves in any pattern, i.e., not limited by the crystal direction, on a silicon surface. As the resulting sharp pits allow very deep photoelectrochemical etching, VHAR silicon microstructures (4-mu m-wide and over-300-mu m-deep trenches) are successfully fabricated in complex patterns (spiral and zigzag demonstrated), overcoming the prevailing limitations of simple pores and straight trenches. Furthermore, by filling the VHAR silicon mold with nickel and removing the silicon, high-aspect-ratio metal microstructures of complex patterns are also obtained. These VHAR microstructures in complex patterns, which are structurally much stronger than the simple posts and straight plates, overcome the stiction problem even when densely populated. [2012-0042]

Sun, GY↗

DOE OSTI2021

Crack tip microplasticity mediated by microstructure gradients

Abstract Traditional fracture theories infer damage at cracks (local field) by surveying loading conditions away from cracks (far field). This approach has been successful in predicting ductile fracture, but it normally assumes isotropic and homogeneous materials. However, myriads of manufacturing procedures induce heterogeneous microstructural gradients that can affect the accuracy of traditional fracture models. This work presents a microstructure‐sensitive finite element approach to explore the shielding effects of grain size and crystallographic orientation gradients on crack tip microplasticity and blunting. A dislocation density‐based crystal plasticity model conveys texture evolution, grain size effects, and directional hardening by computing the constraint from dislocation structures. The results demonstrate that the microstructure can act as a buffer between the local and far fields that affects the crack tip microplasticity variability. For nominal opening loading, grain size and texture affect the local ductility and induce a non‐negligible multiaxial plastic deformation. Furthermore, driving forces based on measuring displacements away from the crack tip are less affected by the microstructure, which suggests that traditional experimental methods smear out important crack tip variability.

Castelluccio, Gustavo M.↗

DOE OSTI2023

Predicting microstructurally sensitive fatigue‐crack path in WE43 magnesium using high‐fidelity numerical modeling and three‐dimensional experimental characterization

Abstract Microstructurally small fatigue‐crack growth in polycrystalline materials is highly three‐dimensional due to sensitivity to local microstructural features (e.g., grains). One requirement for modeling microstructurally sensitive crack propagation is establishing the criteria that govern crack evolution, including crack deflection. Here, a high‐fidelity finite‐element modeling framework is used to assess the performance and validity of various crack‐growth criteria, including slip‐based metrics (e.g., fatigue‐indicator parameters), as potential criteria for predicting three‐dimensional crack paths in polycrystalline materials. The modeling framework represents cracks as geometrically explicit discontinuities and involves voxel‐based remeshing, mesh‐gradation control, and a crystal‐plasticity constitutive model. The predictions are compared to experimental measurements of WE43 magnesium samples subject to fatigue loading, for which three‐dimensional grain structures and fatigue‐crack surfaces were measured post‐mortem using near‐field high‐energy x‐ray diffraction microscopy and x‐ray computed tomography. Findings from this work are expected to improve the predictive capabilities of simulations involving microstructurally small fatigue‐crack growth in polycrystalline materials.

Engineering↗

DOE OSTI2015

Crystal plasticity analysis of stress partitioning mechanisms and their microstructural dependence in advanced steels

Two-phase advanced steels contain an optimized combination of high yield strength and large elongation strain at failure, as a result of stress partitioning between a hard phase (martensite) and a ductile phase (ferrite or austenite). Provided with strong interfaces between the constituent phases, the failure in the brittle martensite phase will be delayed by the surrounding geometric constraints, while the rule of mixture will dictate a large strength of the composite. To this end, the microstructural design of these composites is imperative especially in terms of the stress partitioning mechanisms among the constituent phases. Based on the characteristic microstructures of dual phase and multilayered steels, two polycrystalline aggregate models are constructed to simulate the microscopic lattice strain evolution of these materials during uniaxial tensile tests. By comparing the lattice strain evolution from crystal plasticity finite element simulations with advanced in situ diffraction measurements in literature, this study investigates the correlations between the material microstructure and the micromechanical interactions on the intergranular and interphase levels. Finally, it is found that although the applied stress will be ultimately accommodated by the hard phase and hard grain families, the sequence of the stress partitioning on grain and phase levels can be altered by microstructural designs. Implications of these findings on delaying localized failure are also discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Carbon Support Microstructure Impact on High Current Density Transport Resistances in PEMFC Cathode

Cell voltages at high current densities (HCD) of an operating proton-exchange membrane fuel cell (PEMFC) cathode suffer from losses due to the local-O 2 and bulk-H + transport resistances in the catalyst layer. Particularly, the microstructure of high surface area carbon (HSC) support upon which both the platinum catalyst and ionomer are dispersed play a pivotal role in controlling the reactant transport to the active site in the catalyst layer. In this study, we perform a systematic analysis of the underlying microstructure of platinum-cobalt catalyst dispersed on various HSC supports in terms of their surface area and pore-size distribution. The carbon microstructure was found to strongly influence the PtCo nanoparticle dispersion, catalyst layer ionomer distribution and transport losses governing the performance at HCD. Catalyst layer electrochemical diagnostics carried out to quantify local-O 2 transport resistance and bulk-H + transport resistance in the cathode were found to be directly correlated to the micropore (<2 nm) and macropore (>8 nm) surface areas of the carbon support, respectively. Finally, a 1D-performance model has been developed to assimilate our understanding of the catalyst layer microstructure and transport resistances at HCD.

25 ENERGY STORAGE↗

DOE OSTI2017

Evolution of microstructural disorder in annealed bismuth telluride nanowires

Controlling the distribution of structural defects in nanostructures is important since such defects can strongly affect critical properties, including thermal and electronic transport. However, characterizing the defect arrangements in individual nanostructures is difficult because of the small length scales involved. Here, we investigate the evolution of microstructural disorder with annealing in electrochemically deposited Bi2Te3 nanowires, which are of interest for thermoelectrics. We combine Convergent Beam Electron Diffraction (CBED) and Scanning Transmission Electron Microscopy (STEM) to provide the necessary spatial and orientational resolution. We find that despite their large initial grain sizes and strong Formula crystallographic texturing, the as-deposited nanowires still exhibit significant intragranular orientational disorder. Annealing drives both grain growth and a significant reduction in the intragranular disorder. The results are discussed in the context of the existing understanding of the initial microstructure of electrodeposited materials and the understanding of annealing microstructures in both electrochemically deposited and bulk-deformed materials. Finally, this analysis highlights the importance of assessing both the grain size and intragranular disorder in understanding the microstructural evolution of individual nanostructures.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Modeling Crack Propagation in Polycrystalline Microstructure Using Variational Multiscale Method

Crack propagation in a polycrystalline microstructure is analyzed using a novel multiscale model. The model includes an explicit microstructural representation at critical regions (stress concentrators such as notches and cracks) and a reduced order model that statistically captures the microstructure at regions far away from stress concentrations. Crack propagation is modeled in these critical regions using the variational multiscale method. In this approach, a discontinuous displacement field is added to elements that exceed the critical values of normal or tangential tractions during loading. Compared to traditional cohesive zone modeling approaches, the method does not require the use of any special interface elements in the microstructure and thus can model arbitrary crack paths. The capability of the method in predicting both intergranular and transgranular failure modes in an elastoplastic polycrystal is demonstrated under tensile and three-point bending loads.

36 MATERIALS SCIENCE↗

DOE OSTI2020

MEUMAPPS (Microstructure Evolution Using Massively Parallel Phase-field Simulations)

The software “MEUMAPPS” is a h high-performance computing code used to simulate microstructure evolution associated with diffusional solid-state transformations in structural alloys. Understanding microstructure evolution during thermo-mechanical processing of structural alloys is the first step towards designing and processing alloys for specific applications by meeting property requirements demanded by the application. In this instance, the code is an important component in predicting processing-structure linkages during additive manufacturing of structural alloys as a function of processing parameters and alloy composition used in an additive manufacturing process. The code provides a detailed three-dimensional distribution of different types of phases / constituents and their morphologies, as well as the compositions of these phases that make up the microstructure. The microstructure is simulated by solving the governing partial differential equations using a Fourier Spectral Method.

Radhakrishnan, Balasubram↗

DOE OSTI2025

PyCMG-based Simulation of Volumetric Concrete Microstructure

Concrete is a complex, heterogeneous material with a microstructure composed of aggregates, cement paste, and pores spanning multiple length scales. Understanding this microstructure is critical for advancing the performance, durability, and modeling of concrete-based systems. While experimental imaging such as X-ray computed tomography (XCT) provides valuable insights, generating large datasets with detailed ground truth annotations is both costly and labor-intensive due to challenges in segmenting similar phases, such as aggregates and cement paste, that often share similar attenuation properties. To address this, we developed a pipeline to simulate realistic 3D concrete microstructures using the open-source Python package PyCMG. This simulation effort focuses on generating high-fidelity, annotated microstructures that can serve as training or benchmarking datasets for image analysis, segmentation algorithms, and machine learning models, particularly in scenarios where experimental data is scarce.

Ziabari, Amir [Oak Ridge National Laboratory; ORNL↗

DOE OSTI2022

Effects of Microstructural Composition, Porosity, and Microcracks on the Elastic Moduli of Nuclear Graphites

The elastic responses of nuclear graphite not only depend on the graphitic content itself but are largely dictated by the microstructural constitution of the material. The types of raw materials combined with the manufacturing processes used to produce the graphite yield the microstructural content that primarily includes graphite filler, graphitized pitch binder, and voids/defects that typically occupy approximately 20% of the volume. Among these microstructural components, porosity and microcracking (considered to be part of voids/defects) heavily influence the overall properties of the material, including the elastic moduli. It is widely accepted that the primary effect of oxidation is to increase porosity, but the related effect on the moduli cannot be explained satisfactorily by simply noting changes to porosity. Models describing the elastic moduli of porous, polycrystalline graphite materials have been developed to interpret experimental determinations of Young's modulus and shear modulus in oxidized graphites. Beyond porosity, the moduli are heavily influenced by microcracks, and their effects can be assessed using physical property models based on orientation distribution coefficients and microcrack-modified, single-crystal moduli to represent the combined effects of crystallite orientation and microcracking. This work demonstrates how most modulus measurements in nuclear graphites can be understood using relatively simple models that describe the effects of porosity and microcracking. We also present directions to be pursued to account for microstructure-related effects that occur as a result of neutron irradiation.

Spicer, James B.↗

DOE OSTI2014

Thermal Effects on Microstructural Heterogeneity of Inconel 718 Materials Fabricated by Electron Beam Melting

Additive manufacturing (AM) technologies, also known as 3D printing, have demonstrated the potential to fabricate complex geometrical components, but the resulting microstructures and mechanical properties of these materials are not well understood due to unique and complex thermal cycles observed during processing. The electron beam melting (EBM) process is unique because the powder bed temperature can be elevated and maintained at temperatures over 1000 °C for the duration of the process. This results in three specific stages of microstructural phase evolution: (a) rapid cool down from the melting temperature to the process temperature, (b) extended hold at the process temperature, and (c) slow cool down to the room temperature. In this work, the mechanisms for reported microstructural differences in EBM are rationalized for Inconel 718 based on measured thermal cycles, preliminary thermal modeling, and computational thermodynamics models. The relationship between processing parameters, solidification microstructure, interdendritic segregation, and phase precipitation (δ, γ´, and γ´´) are discussed.

36 MATERIALS SCIENCE↗