Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Facile Ionothermal Synthesis of Microporous and Mesoporous Carbons from Task Specific Ionic Liquids

An expedient, template-free, high-yield, and solventless route to nitrogen-rich micro- and mesoporous carbons is reported based on direct, atmospheric-pressure carbonization of task-specific ionic liquids bearing one or more nitrile side chains. The resulting textural properties (pore regime, surface area) are highly dependent upon the structural motifs of the ions comprising the corresponding parent ionic liquid, and uniform carbon films are routinely deposited with this novel methodology, highlighting excited new opportunities in the development of advanced functional carbon composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced visible-light absorption of mesoporous TiO2 by co-doping with transition-metal/nitrogen ions

Titanium (IV) oxide, TiO2, has been the object of intense scrutiny for energy applications. TiO2 is inexpensive, non-toxic, and has excellent corrosion resistance when exposed to electrolytes. A major drawback preventing the widespread use TiO2 for photolysis is its relatively large band gap of ~3eV. Only light with wavelengths shorter than 400 nm, which is in the ultraviolet portion of the spectrum, has sufficient energy to be absorbed. Less than 14 percent of the solar irradiation reaching the earth s surface has energy exceeding this band gap. Adding dopants such as transition metals has long been used to reduce the gap and increase photocatalytic activity by accessing the visible part of the solar spectrum. The degree to which the band gap is reduced using transition metals depends in part on the overlap of the d-orbitals of the transition metals with the oxygen p-orbitals. Therefore, doping with anions such as nitrogen to modify the cation-anion orbital overlap is another approach to reduce the gap. Recent studies suggest that using a combination of transition metals and nitrogen as dopants is more effective at introducing intermediate states within the band gap, effectively narrowing it. Here we report the synthesis of mesoporous TiO2 spheres, co-doped with transition metals and nitrogen that exhibit a nearly flat absorbance response across the visible spectrum extending into the near infrared.

Mathis, John↗

Mesoporous Carbon Membranes for Selective Gas Separations

This factsheet describes a study whose focus is on translating a novel class of material developed at Oak Ridge National Laboratory—selfassembled mesoporous carbon—into robust, efficient membrane systems for selective industrial gas separations.

Fact Sheet↗

Mesoporous nanocrystalline film architecture for capacitive storage devices

A mesoporous, nanocrystalline, metal oxide construct particularly suited for capacitive energy storage that has an architecture with short diffusion path lengths and large surface areas and a method for production are provided. Energy density is substantially increased without compromising the capacitive charge storage kinetics and electrode demonstrates long term cycling stability. Charge storage devices with electrodes using the construct can use three different charge storage mechanisms immersed in an electrolyte: (1) cations can be stored in a thin double layer at the electrode/electrolyte interface (non-faradaic mechanism); (2) cations can interact with the bulk of an electroactive material which then undergoes a redox reaction or phase change, as in conventional batteries (faradaic mechanism); or (3) cations can electrochemically adsorb onto the surface of a material through charge transfer processes (faradaic mechanism).

25 ENERGY STORAGE↗

Mesoporous silicon synthesis and applications in Li-ion batteries and solar hydrogen fuel cells

We provide a mesoporous silicon material (PSi) prepared via a template-free and HF-free process. The production process is facile and scalable, and it may be conducted under mild reaction conditions. The silicon may be produced directly by the reduction of a silicon-halogenide precursor (for example, SiCl.sub.4) with an alkaline alloy (for example, NaK alloy). The resulting Si-salt matrix is then annealed for the pore formation and crystallite growth. Final product is obtained by removal of the salt by-products with water.

25 ENERGY STORAGE↗

Direct polymer templating synthesis of mesoporous carbon

The invention is directed to a method for fabricating a mesoporous carbon composite material. The method comprises providing a precursor composition and subjecting the precursor material to a curing step followed by carbonization step. The precursor composition comprises (i) a templating component comprised of a linear homopolymer material, (ii) a phenolic compound or material, (iii) a crosslinkable aldehyde component, and (iv) an acid catalyst.

36 MATERIALS SCIENCE↗

Mesoporous nanocrystalline film architecture for capacitive storage devices

A mesoporous, nanocrystalline, metal oxide construct particularly suited for capacitive energy storage that has an architecture with short diffusion path lengths and large surface areas and a method for production are provided. Energy density is substantially increased without compromising the capacitive charge storage kinetics and electrode demonstrates long term cycling stability. Charge storage devices with electrodes using the construct can use three different charge storage mechanisms immersed in an electrolyte: (1) cations can be stored in a thin double layer at the electrode/electrolyte interface (non-faradaic mechanism); (2) cations can interact with the bulk of an electroactive material which then undergoes a redox reaction or phase change, as in conventional batteries (faradaic mechanism); or (3) cations can electrochemically adsorb onto the surface of a material through charge transfer processes (faradaic mechanism).

25 ENERGY STORAGE↗

Mesoporous nanocrystalline film architecture for capacitive storage devices

A mesoporous, nanocrystalline, metal oxide construct particularly suited for capacitive energy storage that has an architecture with short diffusion path lengths and large surface areas and a method for production are provided. Energy density is substantially increased without compromising the capacitive charge storage kinetics and electrode demonstrates long term cycling stability. Charge storage devices with electrodes using the construct can use three different charge storage mechanisms immersed in an electrolyte: (1) cations can be stored in a thin double layer at the electrode/electrolyte interface (non-faradaic mechanism); (2) cations can interact with the bulk of an electroactive material which then undergoes a redox reaction or phase change, as in conventional batteries (faradaic mechanism); or (3) cations can electrochemically adsorb onto the surface of a material through charge transfer processes (faradaic mechanism).

25 ENERGY STORAGE↗

Mesoporous metal doped cerium oxide catalyst

A mesoporous metal doped cerium oxide catalyst is provided. The catalyst can contain nanotextured cerium oxide (CeO2) which can be utilized for hydrogen production or reformate gas purification in a water gas shift reaction. The catalyst may be advantageously used to remove CO from a gas containing CO. The catalyst may also be incorporated into a fuel processor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultramicro to mesopore frameworks for selective separation and storage of noble gases

Methods and materials for the selective capture and storage of preselected materials from gas streams using metal organic framework (MOF) materials are described. In various embodiments preselected target material gases could include noble gasses such as Kr, Xe, Rn, Arultramicro to mesopore frameworks for selective separation and storage of noble gases, other gasses such as I2 or other particular isotopes either naturally occurring or man-made, or another preselected gas capture material such as a target material for legal, regulatory or treaty compliance, or a preselected material from a particular process such as a cleaning or etching agent from semiconducting or microelectronic manufacture, or a portion of an anesthetic gas such as nitrous oxide, isoflurane, sevoflurane or a fluorinated ethers.

Thallapally, Praveen K.↗

Mesoporous tungsten oxide composition

The present disclosure relates to tungsten oxide composition. Specifically, the present disclosure relates to mesoporous tungsten oxide composition that is active for multiple reactions, including aromatic alkylation, alkene coupling, alkene cyclization, alkyne oxidation, alcohol dehydrogenation reactions.

Suib, Steven L.↗

Enhanced accumulation and visible light-assisted degradation of azo dyes in poly(allylamine hydrochloride)-modified mesoporous silica spheres

A new route for the economic and efficient treatment of azo dye pollutants is reported, in which surface-modified organic-inorganic hybrid mesoporous silica (MS) spheres were chosen as microreactors for the accumulation and subsequent photodegradation of pollutants in defined regions. The surface-modified silica materials were prepared by anchoring the polycationic species such as poly(allylamine hydrochloride) on MS spheres via a simple wet impregnation method. The as-synthesized spheres with well-defined porous structures exhibited 15 times of accumulating capacity for orange II and Congo red compared to that of the pure MS spheres. Diffuse reflectance UV-vis spectroscopy and confocal laser scanning microscopy demonstrated that the accumulated orange II and CR in defined MS spheres were rapidly degraded in the presence of Fenton reagent under visible radiation. Kinetics analysis in recycling degradation showed that the as-synthesized materials might be utilized as environment-friendly preconcentrators/microreactors for the remediation of dye wastewater.

36 MATERIALS SCIENCE↗

Synthesis and visible light photocatalysis of Fe-doped TiO{sub 2} mesoporous layers deposited on hollow glass microbeads

Nano-composite of Fe-doped anatase TiO{sub 2} nanocrystals loaded on the hollow glass microbeads was prepared by co-thermal hydrolysis deposition and calcining treatment. The adherence of TiO{sub 2} mesoporous layers to the surfaces of hollow glass microbeads prevented the aggregation of TiO{sub 2} nanoparticles and benefited to their catalytic activity. The doping of Fe ions makes the absorption edge of the TiO{sub 2} based nano-composite red-shifted into the visible region. An effective photodegradation of the methyl orange aqueous solution was achieved under visible light (lambda>420 nm) irradiation, revealing the potential applicability of such nano-composite in some industry fields, such as air and water purifications. - Graphical abstract: Nano-composite of Fe-doped anatase TiO{sub 2} nanocrystals loaded on the hollow glass microbeads was prepared by co-thermal hydrolysis deposition. Photodegradation of the methyl orange was achieved under visible light irradiation, revealing the potential applicability of such nano-composite in some industry fields.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, photophysical and oxygen-sensing properties of a novel Eu{sup 3+} complex incorporated in mesoporous MCM-41

A novel Eu{sup 3+} complex of Eu(DPIQ)(TTA){sub 3} (DPIQ=10H-dipyrido [f,h] indolo [3,2-b] quinoxaline, TTA=2-thenoyltrifluoroacetonate) was synthesized and encapsulated in the mesoporous MCM-41, hoping to explore an oxygen-sensing system based on the long-lived Eu{sup 3+} emitter. The Eu(DPIQ)(TTA){sub 3}/MCM-41 composites were characterized by infrared spectra (IR), ultraviolet-visible (UV-vis) absorption spectra, small-angle X-ray diffraction (SAXRD), luminescence intensity quenching upon various oxygen concentrations, and fluorescence decay analysis. The results indicated that the composites exhibited the characteristic emission of the Eu{sup 3+} ion and the fluorescence intensity of {sup 5}D{sub 0}-{sup 7}F{sub 2} obviously decreased with increasing oxygen concentrations. The oxygen sensing properties of the composites with different loading levels of Eu(DPIQ)(TTA){sub 3} complex were investigated. A sensitivity of 3.04, a short response time of 7 s, and good linearity were obtained for the composites with a loading level of 20 mg/g. These results are the best reported values for optical oxygen-sensing materials based on Eu{sup 3+} complexes so far. - Graphical abstract: Novel optical oxygen-sensing composites are prepared by incorporating a novel Eu{sup 3+} complex Eu(DPIQ)(TTA){sub 3} into MCM-41. The emission intensity of Eu(DPIQ)(TTA){sub 3}/MCM-41 composites exhibits a strong oxygen dependent characteristic and the composite with a loading level of 20 mg/g possesses better fluorescence quenching with increasing oxygen concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZnO-based hollow microspheres with mesoporous shells: Polyoxometalate-assisted fabrication, growth mechanism and photocatalytic properties

With the assistance of Keggin-type polyoxometalate, ZnO hollow microspheres with mesoporous shells were synthesized via a simple solvothermal approach without any templates and surfactants. The observations of morphology and structure performed by field emission scanning electronic microscopy and transmission electron microscopy indicated that the shells of the ZnO hollow spheres were built from nanosheets which were composed of nanoparticles. The transformation of structure and composition of samples were investigated by X-ray diffraction, X-ray photoelectron spectrometry and fourier transform infrared absorption spectroscopy. The formation mechanism of the hollow spheres is proposed based on time-dependent experimental results. The ZnO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B under ultraviolet irradiation. - Graphical Abstract: ZnO hollow spheres with mesporous shells were synthesized by an one-pot polyoxometalate-assisted solvothermal route. The ZnO hollow microspheres exhibited a high photocatalytic activity for decolorization of Rhodamine B (RhB) under UV irradiation. Highlights: > ZnO hollow microspheres were synthesized via a solvothermal route with polyoxometalate. > The polyoxometalate was vital for the formation of the hollow microspheres. > The ZnO hollow microspheres exhibited excellent photocatalytic activity of Rhodamine B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mesoporous nanocrystalline film architecture for capacitive storage devices

A mesoporous, nanocrystalline, metal oxide construct particularly suited for capacitive energy storage that has an architecture with short diffusion path lengths and large surface areas and a method for production are provided. Energy density is substantially increased without compromising the capacitive charge storage kinetics and electrode demonstrates long term cycling stability. Charge storage devices with electrodes using the construct can use three different charge storage mechanisms immersed in an electrolyte: (1) cations can be stored in a thin double layer at the electrode/electrolyte interface (non-faradaic mechanism); (2) cations can interact with the bulk of an electroactive material which then undergoes a redox reaction or phase change, as in conventional batteries (faradaic mechanism); or (3) cations can electrochemically adsorb onto the surface of a material through charge transfer processes (faradaic mechanism).

Dunn, Bruce S.↗

Controlled Assembly of Hetero-Binuclear Sites on Mesoporous Silica: Visible Light Charge-Transfer Units With Selectable Redox Properties

Mild synthetic methods are demonstrated for the selective assembly of oxo-bridged heterobinuclear units of the type TiOCr{sup III}, TiOCO{sup II}, and TiOCe{sup III} on mesoporous silica support MCM-41. One method takes advantage of the higher acidity and, hence, higher reactivity of titanol compared to silanol OH groups toward Ce{sup III} or CO{sup II} precursors. The procedure avoids the customary use of a strong base. The controlled assembly of the TiOCr system exploits the selective redox reactivity of one metal toward another (Ti{sup III} precursor reacting with anchored Cr{sup VI} centers). The observed selectivity for linking a metal precursor to an already anchored partner versus formation of isolated centers ranges from a factor of 6 (TiOCe) to complete (TiOCr, TiOCo). Evidence for oxo bridges and determination of the coordination environment of each metal center is based on K-edge extended X-ray absorption fine structure spectroscopy (TiOCr), L-edge absorption spectroscopy (Ce), and X-ray absorption near edge structure measurements (Co, Cr). Electron paramagnetic resonance, optical, Fourier transform Raman, and Fourier transform infrared spectroscopy furnish additional details on oxidation state and coordination environment of donor and acceptor metal centers. In the case of TiOCr, the integrity of the anchored group upon calcination (350 C) and cycling of the Cr oxidation state is demonstrated. The binuclear units possess metal-to-metal charge-transfer transitions that absorb deep in the visible region. The flexible synthetic method for assembling the units opens up the use of visible light charge-transfer pumps featuring donor or acceptor metals with selectable redox potential.

36 MATERIALS SCIENCE↗

Hierarchical Ordered Mesoporous Carbon from Phloroglucinol-Glyoxal and its Application in Capacitive Deionization of Brackish Water

Templated carbon materials have recently received tremendous attention due to energy storage and separations applications. Hierarchical structures are ideal for increased mass-transport throughout the carbon material. A new ordered mesoporous carbon material has been developed using glyoxal which exhibits a hierarchical structure with pore sizes up to 200 nm. The hierarchical structure arises from the cross linking reagent and not from the standard spinodal decomposition of a secondary solvent. The carbon material was studied for potential application as a capacitive deionization (CDI) electrode for brackish water. Results indicate that the hierarchical structure provides a pathway for faster adsorption kinetics when compared to standard resorcinol-formaldehyde CDI electrodes.

36 MATERIALS SCIENCE↗