Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “melt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

The reduction of chlorine on carbon in AlCl3-KCl-NaCl melts

Using a rotating vitreous carbon disk electrode, the kinetic parameters for chlorine reduction in an AlCl3-KCl-NaCl (57.5-12.5-30 mol percent) melt were determined. It was found that the reduction of chlorine occurs according to two paths, with the first step probably being rate-determining.

Holleck, G. L.↗
NASA NTRS1972

Shock melting and vaporization of metals.

The effect of initial porosity on shock induction of melting and vaporization is investigated for Ba, Sr, Li, Fe, Al, U, and Th. For the less compressible of these metals, it is found that for a given strong shock-generation system (explosive in contact, or flyer-plate impact) an optimum initial specific volume exists such that the total entropy production, and hence the amount of metal liquid or vapor, is a maximum. Initial volumes from 1.4 to 2.0 times crystal volumes, depending on the metal sample and shock-inducing system, will result in optimum post-shock entropies.

Ahrens, T. J.↗
NASA NTRS1972

The effect of gravity induced free convection upon the melting phenomena of a finite paraffin slab for thermal control

Two theoretical models were developed to predict the thermal response of the phase change material to a given hot plate temperature. A two-dimensional pure conduction model was developed to predict the melting of the phase change material when heat transfer was a function of conduction. A combined conduction-convection model, also two-dimensional, was developed to predict the phase change phenomena when heat transfer was a function of conduction and gravity-induced free convection. Both models were solved using explicit finite difference approximations on a digital computer. The experimental equipment consisted of a rectangular cell utilizing a heat chamber, an expansion chamber, and a test chamber; a sixteen channel multipoint recorder, and a fluid flow system. The recorder monitered hot and cold plate temperatures and interior node temperatures at two second intervals. A comparison of theoretical temperature profiles and experimental temperature profiles is presented for six runs at various angles of inclination of the test cell with respect to the horizontal direction. A detailed discussion of results is presented.

Bain, R. L.↗
NASA NTRS1972

Purfication kinetics of beryllium during vacuum induction melting

The kinetics of evaporation in binary alloys were quantitatively treated. The formalism so developed works well for several systems studied. The kinetics of purification of beryllium was studied through evaporation data actually acquired during vacuum induction melting. Normal evaporation equations are shown to be generally valid and useful for understanding the kinetics of beryllium purification. The normal evaporation analysis has been extended to cover cases of limited liquid diffusion. It was shown that under steady-state evaporation, the solute concentration near the surface may be up to six orders of magnitude different from the bulk concentration. Corrections for limited liquid diffusion are definitely needed for the highly evaporative solute elements, such as Zn, Mg, and Na, for which the computed evaporation times are improved by five orders of magnitude. The commonly observed logarithmic relation between evaporation time and final concentration further supports the validity of the normal evaporation equations.

Mukherjee, J. L.↗
NASA NTRS1972

Partitioning of potassium between silicates and sulphide melts - Experiments relevant to the earth's core.

The partitioning of potassium between roedderite, K2Mg5Si12O30 and an Fe-FeS melt was investigated at temperatures about 40 C above the Fe-FeS eutectic. Roedderite was considered a prime candidate for one of the potassium-bearing phases in the primitive earth because roedderite and merrihueite are the only two silicates containing essential potassium which have been identified in stony meteorites. Application of the results to a primitive chondritic earth is discussed, and it is concluded that extraction of most of the earth's potassium into the Fe-FeS core would occur under the conditions in the early earth.-

Goettel, K. A.↗
NASA NTRS1973

Basaltic vitrophyre 15597 - An undifferentiated melt sample.

The vitrophyric nature and textural appearance of the Apollo 15 sample 15597, and the unusual compositions of its pigeonite centers and chromites, as well as the extreme chemical zonation of its pyroxenes, give strong evidence that this rock arrived on the lunar surface in an entirely liquid state. It may represent a 'primitive melt,' or at least a precursor from which mare lavas were derived.

Weigand, P. W.↗
NASA NTRS1972

Partitioning of potassium between silicates and sulphide melts: Experiements relevant to the earth's core

The partitioning of potassium between roedderite, K2Mg5Si12O30 and an Fe-FeS melt was investigaged at temperatures about 40 C above the Fe-FeS eutectic. Roedderite was considered a prime candidate for one of the potassium-bearing phases in the primitive earth because roedderite and merrihueite are the only two silicates containing essential potassium which have been identified in stony meteorites. A mean K2S/FeS weight ratio of (3.340 + or - 0.015) x 0.001 was determined in these experiments; a K2S/FeS weight ratio of about 0.01 would be sufficient to extract all potassium in a chondritic earth into the core. Application of these results to a primitive chondritic earth is discussed and it is concluded that extraction of most of the earth's potassium into the Fe-FeS core would occur under the conditions in the early earth.

Goettel, K. A.↗
NASA NTRS1974

Beading and spiking phenomena in the M551 metals melting experiment

A study was made regarding the beading and spiking phenomena observed in the M551 metals melting experiment conducted during the Skylab I mission in June 1973. An analysis was made of the beading phenomenon based on the Karman vortex shedding theory. The results tend to support the hypothesis that beading which occurred in the stainless and tantalum samples was a Karman vortex street formation. A dynamic model of cavity oscillation is discussed to explain the spiking phenomenon which was observed in the stainless steel and tantalum samples. Calculations of spiking frequency indicate that the intensity of spiking depends primarily on the vapor pressure and surface tension properties of the material, and is only slightly affected by the level of gravitation acceleration.

Fan, C.↗
NASA NTRS1974

Calculations of the moon's heat history at different concentrations of radioactive elements taking account of the material differentiation with melting

A mathematical procedure for analyzing the heat conductivity of the lunar surface is discussed. The solution is based on homogeneous and laminated moon models and considers the effects of radioactive elements conveyed to the lunar surface by melting. The various parameters which introduce uncertainties into the numerical analysis are identified. The application of data obtained from radio astronomy and from analyses of lunar samples returned by the Apollo flights is explained. Tables of data are included to show the types and amounts of radioactive materials which have been identified.

Arnatskaya, O. I.↗
NASA NTRS1975

Melting behavior and phase relations of lunar samples

Cooling rate studies of 12002 were conducted and the results interpreted in terms of the crystallization history of this rock and certain other picritic Apollo 12 samples. Calculations of liquid densities and viscosities during crystallization, crystal settling velocities, and heat loss by the parent rock body are discussed, as are petrographic studies of other Apollo 12 samples. The process of magmatic differentiation that must have accompanied the early melting and chemical fractionation of the moon's outer layers was investigated. The source of regions of both high- and low-titanium mare basalts were also studied.

Hays, J. F.↗
NASA NTRS1975

Chemical, mineralogical and textural systematics of non-mare melt rocks: Implications for lunar impact and volcanic processes

Based on a synthesis of chemical data for over 200 samples, the nonmare rocks with fine grained melt textures can be classified into 7 major groups: anorthositic basalts, troctolitic basalts, VHA basalts, Apollo 14-type KREEP basalts, Apollo 15-type KREEP basalts, Apollo 17-type KREEP basalts, and aluminous mare basalts. Review of chemical, mineralogical, textural and experimental evidence leads to preferred hypotheses for the origins of these rocks; those hypotheses are discussed in detail.

Irving, A. J.↗