SEARCH · Engineering Papers

Results for “measurement data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS2007

An IEEE 1451.1 Architecture for ISHM Applications

The IEEE 1451.1 Standard for a Smart Transducer Interface defines a common network information model for connecting and managing smart elements in control and data acquisition networks using network-capable application processors (NCAPs). The Standard is a network-neutral design model that is easily ported across operating systems and physical networks for implementing complex acquisition and control applications by simply plugging in the appropriate network level drivers. To simplify configuration and tracking of transducer and actuator details, the family of 1451 standards defines a Transducer Electronic Data Sheet (TEDS) that is associated with each physical element. The TEDS contains all of the pertinent information about the physical operations of a transducer (such as operating regions, calibration tables, and manufacturer information), which the NCAP uses to configure the system to support a specific transducer. The Integrated Systems Health Management (ISHM) group at NASA's John C. Stennis Space Center (SSC) has been developing an ISHM architecture that utilizes IEEE 1451.1 as the primary configuration and data acquisition mechanism for managing and collecting information from a network of distributed intelligent sensing elements. This work has involved collaboration with other NASA centers, universities and aerospace industries to develop IEEE 1451.1 compliant sensors and interfaces tailored to support health assessment of complex systems. This paper and presentation describe the development and implementation of an interface for the configuration, management and communication of data, information and knowledge generated by a distributed system of IEEE 1451.1 intelligent elements monitoring a rocket engine test system. In this context, an intelligent element is defined as one incorporating support for the IEEE 1451.x standards and additional ISHM functions. Our implementation supports real-time collection of both measurement data (raw ADC counts and converted engineering units) and health statistics produced by each intelligent element. The handling of configuration, calibration and health information is automated by using the TEDS in combination with other electronic data sheets extensions to convey health parameters. By integrating the IEEE 1451.1 Standard for a Smart Transducer Interface with ISHM technologies, each element within a complex system becomes a highly flexible computation engine capable of self-validation and performing other measures of the quality of information it is producing.

Morris, Jon A.↗

NASA NTRS1982

Results of the VPI&SU Comstar experiment

This paper summarizes annual and cumulative attenuation data, depolarization data, and associated local rain rate distributions obtained with the Comstar family of 19.04- and 28.56-GHz satellite beacons during the years 1977-1981. It discusses the relationships between attenuation and rain rate and between attenuation and depolarization, compares measured data on the joint distribution of attenuation and depolarization, and examines the limitations that propagation effects will impose on future 20/30-GHz satellite communications systems.

Andrews, J. H.↗

NASA NTRS1984

Estimates of the geostrophic stream function in the western North Pacific from XBT surveys

Bernstein and White (1981) have argued that the 300 m temperature field in the western North Pacific reflects the 100/1000 dbar geostrophic stream function of the upper ocean where 100/1000 dbar implies the 100 dbar surface relative to the 1000 dbar surface. The correlation between upper ocean dynamic height and temperature in this region provides the basis for their argument. The involved relationship suggests that it may be possible to monitor the relative upper ocean geostrophic transport, as well as energy relations and heat fluxes with expendable bathythermograph (XBT) surveys. Certain discrepancies between data from different sources are felt to result from problems with the XBT observations. The present investigation is concerned with the determination of the ability of XBT surveys to estimate geostrophic currents, taking into account a comparison of directly measured data with estimated shears. Discrepancies are found to be related to an underestimation of the dynamic height gradients.

Koblinsky, C. J.↗

NASA NTRS1988

Martian regolith geochemistry and sampling techniques

Laboratory study of samples of the intermediate and fine-grained regolith, including duricrust peds, is a fundamental prerequisite for understanding the types of physical and chemical weathering processes on Mars. The extraordinary importance of such samples is their relevance to understanding past changes in climate, availability (and possible physical state) of water, eolian forces, the thermal and chemical influences of volcanic and impact processes, and the inventory and fates of Martian volatiles. Fortunately, this regolith material appears to be ubiquitous over the Martian surface, and should be available at many different landing sites. Viking data has been interpreted to indicate a smectite-rich regolith material, implying extensive weathering involving aqueous activity and geochemical alteration. An all-igneous source of the Martian fines has also been proposed. The X-ray fluorescence measurement data set can now be fully explained in terms of a simple two-component model. The first component is silicate, having strong geochemical similarities with Shergottites, but not other SNC meteorites. The second component is salt. Variations in these components could produce silicate and salt-rich beds, the latter being of high potential importance for microenvironments in which liquid water (brines) could exist. It therefore would be desirable to scan the surface of the regolith for such prospects.

Clark, B. C.↗

NASA NTRS1991

Computational modeling of the pressurization process in a NASP vehicle propellant tank experimental simulation

A multidimensional computational model of the pressurization process in a slush hydrogen propellant storage tank was developed and its accuracy evaluated by comparison to experimental data measured for a 5 ft diameter spherical tank. The fluid mechanic, thermodynamic, and heat transfer processes within the ullage are represented by a finite-volume model. The model was shown to be in reasonable agreement with the experiment data. A parameter study was undertaken to examine the dependence of the pressurization process on initial ullage temperature distribution and pressurant mass flow rate. It is shown that for a given heat flux rate at the ullage boundary, the pressurization process is nearly independent of initial temperature distribution. Significant differences were identified between the ullage temperature and velocity fields predicted for pressurization of slush and those predicted for pressurization of liquid hydrogen. A simplified model of the pressurization process was constructed in search of a dimensionless characterization of the pressurization process. It is shown that the relationship derived from this simplified model collapses all of the pressure history data generated during this study into a single curve.

Sasmal, G. P.↗

NASA NTRS1994

Dendritic Growth Velocities in Microgravity

We measured dendritic tip velocities in pure succinonitrile (SCN) in microgravity. using a sequence of telemetered binary images sent to Earth from the Space Shuttle Columbia (STS-62). Growth velocities were measured as a function of the supercooling over the range 0.05-1.5 K. Microgravity observations show that buoyancy-induced convection alters the growth kinetics of SCN dendrites at supercooling as high as 1.3 K. Also, the dendrite velocity data measured under microgravity agree well with the Ivantsov paraboloidal diffusion solution when coupled to a scaling constant of sigma(sup *) = 0.0157.

Glicksman, M. E.↗

NASA NTRS2005

Verification of a 2 kWe Closed-Brayton-Cycle Power Conversion System Mechanical Dynamics Model

Vibration test data from an operating 2 kWe closed-Brayton-cycle (CBC) power conversion system (PCS) located at the NASA Glenn Research Center was used for a comparison with a dynamic disturbance model of the same unit. This effort was performed to show that a dynamic disturbance model of a CBC PCS can be developed that can accurately predict the torque and vibration disturbance fields of such class of rotating machinery. The ability to accurately predict these disturbance fields is required before such hardware can be confidently integrated onto a spacecraft mission. Accurate predictions of CBC disturbance fields will be used for spacecraft control/structure interaction analyses and for understanding the vibration disturbances affecting the scientific instrumentation onboard. This paper discusses how test cell data measurements for the 2 kWe CBC PCS were obtained, the development of a dynamic disturbance model used to predict the transient torque and steady state vibration fields of the same unit, and a comparison of the two sets of data.

Ludwiczak, Damian R.↗

NASA NTRSDate not supplied

Inlet Radiated Noise Predictions for the NASA Source Diagnostic Test Fan Using Physics-Based Simulations

Commercial supersonic aircraft are expected to produce considerably more noise during landing and take-off operations than existing subsonic aircraft. Establishing noise regulation is challenging because no examples of this aircraft type are currently flying. Existing aircraft noise prediction tools can be used, but the noise source models for these empirical tools are typically based on data from subsonic aircraft components. The present work documents a procedure for using physics-based computational tools to generate the propagating sound field radiating out the nacelle inlet. Although no analytical source modeling is demonstrated, these tools utilize measured data to compare the complex pressure for various propagating modes. The discrepancies found in applying the propagation tools to the subsonic inlet will be ascribed to calculations of supersonic inlets being used to update current empirical noise prediction tools.

Noise Predictions↗

NASA NTRS2009

Fully Employing Software Inspections Data

Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

Shull, Forrest↗

NASA NTRS1987

Highlights of unsteady pressure tests on a 14 percent supercritical airfoil at high Reynolds number, transonic condition

Steady and unsteady pressures were measured on a two-dimensional supercritical airfoil in the Langley 0.3-m Transonic Cryogenic Tunnel at Reynolds numbers (6-35) x 10 to the 6th. The airfoil was oscillated in pitch at amplitudes from + or - .25 degrees to + or - 1.0 degrees at frequencies from 5 Hz to 60 Hz. The special requirements of testing an unsteady pressure model in a pressurized cryogenic tunnel are discussed. Selected steady measured data are presented and are compared with GRUMFOIL calculations at Reynolds number 6 x 10 to the 6th and 30 x 10 to the 6th. Experimental unsteady results at the same Reynolds numbers are examined for Reynolds-number effects. Measured unsteady results at two mean angles of attack at Reynolds number of 30 x 10 to the 6th are also examined.

Hess, Robert W.↗

NASA NTRS1989

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross section

Calculation methods for turbulent duct flows are generalized for ducts with arbitrary cross-sections. The irregular physical geometry is transformed into a regular one in computational space, and the flow equations are solved with a finite-volume numerical procedure. The turbulent stresses are calculated with an algebraic stress model derived by simplifying model transport equations for the individual Reynolds stresses. Two variants of such a model are considered. These procedures enable the prediction of both the turbulence-driven secondary flow and the anisotropy of the Reynolds stresses, in contrast to some of the earlier calculation methods. Model predictions are compared to experimental data for developed flow in triangular duct, trapezoidal duct and a rod-bundle geometry. The correct trends are predicted, and the quantitative agreement is mostly fair. The simpler variant of the algebraic stress model procured better agreement with the measured data.

Demuren, A. O.↗

NASA NTRS1990

Calculation of turbulence-driven secondary motion in ducts with arbitrary cross-section

Demuren, A. O.↗

NASA NTRS1995

Photoproduction of carbonyl sulfide in south Pacific Ocean waters as a function of irradiation wavelength

Carbonly sulfide (OCS) photoproduction rates were measured at selected wavelengths of ultraviolet light between 297 and 405 nm in sea water samples from the southern Pacific Ocean. Near-surface and column production rate spectra for natural sunlit waters were calculated using sea-surface sunlight data measured near the austral summer solstice. These plots show that photoproduction rates are at a maximum at 313 nm in tropical waters and at 336 nm in Antarctic waters. Tropical surface and column rates were found to be 68 pM/day and 360 nmol/sq m/day, respectively, and Antarctic surface and column rates were found to be 101 pM/day and 620 nmol/sq m/day, respectively. A high degree of variability was observed between photoproduction rates from different ocean regions, with coastal rates being the highest, suggesting that natural environmental variability is an important factor. Photoproduction rates at 297 nm were found to be constant at individual locations with increasing irradiation time. Relative photoproduction rates from this work are compared to previously measured rates from coastal sea water.

Weiss, Peter S.↗

NASA NTRS2012

Prediction of BVI Noise for an Active Twist Rotor Using a Loosely Coupled CFD/CSD Method and Comparison to Experimental Data

Numerical predictions of the acoustic characteristics of an Active Twist Rotor (ATR), using two methods to compute the rotor blade aerodynamics and elastic blade motion are compared to experimental data from a wind tunnel test in the NASA Langley Transonic Dynamics Tunnel (TDT) in 2000. The first method, a loosely coupled iterative method, utilizes the Computational Fluid Dynamics (CFD) code OVERFLOW 2 and the Computational Structural Dynamics (CSD) code CAMRAD II. The second method utilizes the CAMRAD II free-wake model only. The harmonic active-twist control to the main rotor blade system is identified with three parameters - harmonic actuation frequency, actuation amplitude, and control phase angle. The resulting aerodynamics and blade motion data from the two methods are then used in the acoustics code PSU-WOPWOP to predict acoustic pressure on a spherical array of equally spaced observers surrounding the rotor. This spherical distribution of pressure is used to compute the sound power level representing baseline and actuated conditions. Sound power levels for three categories of noise are defined as - blade-vortex interaction sound power level (BVIPWL), low frequency sound power level (LFPWL), and overall sound power level, OAPWL. Comparisons with measured data indicate the CFD/CSD analysis successfully captures the trends in sound power levels and the effects of active-twist control at advance ratios of 0.14 and 0.17. The free-wake model predictions show inconsistent sound power levels relative to the trends in the experimental and CFD data. This paper presents the first ever comparison between CFD/CSD acoustic predictions for an active-twist rotor and experimental measurements.

Fogarty, David E.↗

NASA NTRS2004

Advanced Signal Conditioners for Data-Acquisition Systems

Signal conditioners embodying advanced concepts in analog and digital electronic circuitry and software have been developed for use in data-acquisition systems that are required to be compact and lightweight, to utilize electric energy efficiently, and to operate with high reliability, high accuracy, and high power efficiency, without intervention by human technicians. These signal conditioners were originally intended for use aboard spacecraft. There are also numerous potential terrestrial uses - especially in the fields of aeronautics and medicine, wherein it is necessary to monitor critical functions. Going beyond the usual analog and digital signal-processing functions of prior signal conditioners, the new signal conditioner performs the following additional functions: It continuously diagnoses its own electronic circuitry, so that it can detect failures and repair itself (as described below) within seconds. It continuously calibrates itself on the basis of a highly accurate and stable voltage reference, so that it can continue to generate accurate measurement data, even under extreme environmental conditions. It repairs itself in the sense that it contains a micro-controller that reroutes signals among redundant components as needed to maintain the ability to perform accurate and stable measurements. It detects deterioration of components, predicts future failures, and/or detects imminent failures by means of a real-time analysis in which, among other things, data on its present state are continuously compared with locally stored historical data. It minimizes unnecessary consumption of electric energy. The design architecture divides the signal conditioner into three main sections: an analog signal section, a digital module, and a power-management section. The design of the analog signal section does not follow the traditional approach of ensuring reliability through total redundancy of hardware: Instead, following an approach called spare parts tool box, the reliability of each component is assessed in terms of such considerations as risks of damage, mean times between failures, and the effects of certain failures on the performance of the signal conditioner as a whole system. Then, fewer or more spares are assigned for each affected component, pursuant to the results of this analysis, in order to obtain the required degree of reliability of the signal conditioner as a whole system. The digital module comprises one or more processors and field-programmable gate arrays, the number of each depending on the results of the aforementioned analysis. The digital module provides redundant control, monitoring, and processing of several analog signals. It is designed to minimize unnecessary consumption of electric energy, including, when possible, going into a low-power "sleep" mode that is implemented in firmware. The digital module communicates with external equipment via a personal-computer serial port. The digital module monitors the "health" of the rest of the signal conditioner by processing defined measurements and/or trends. It automatically makes adjustments to respond to channel failures, compensate for effects of temperature, and maintain calibration.

Lucena, Angel↗

NASA NTRSDate not supplied

Broadband Noise Prediction of Two Small Hovering Rotors using FUN3D-ANOPP2

A computational study was performed on two small hovering rotors, the ideally twisted rotor and the optimum hovering 2-bladed rotor, using FUN3D-ANOPP2. The effects of different inviscid upwinding techniques and temporal resolutions on aerodynamic performance and acoustic prediction were compared against experimental data obtained in the Small Hover Anechoic Chamber facility at the NASA Langley Research Center. Decreasing the numerical dissipation with 𝜅 tuning or by using a higher-order inviscid flux reconstruction scheme was shown to improve aerodynamic performance predictions when compared to measured data for most cases. The effect of dissipation on the vorticity field was also seen to influence the amount of turbulence surrounding the vortex core of the first blade-vortex interaction (BVI), the coherence of the second and higher BVI vortex cores, and the downstream breakdown of the rotor wake for both rotor geometries. Tonal and broadband noise predictions from simulation cases with lower dissipation were seen to agree better with the experiment for the ideally twisted rotor, whereas temporal resolution differences had negligible impact on the broadband noise results. Similar fundamental BPF directivity patterns were obtained by all simulation cases for the optimum hovering 2-bladed rotor, while the most accurate 2*BPF directivity trend, compared to the experiment, was predicted by the lower-dissipation case at the coarse temporal resolution, albeit with an amplitude underprediction. Broadband noise spectral roll-off behavior was seen to occur at a higher frequency when using a finer temporal resolution for the optimum hovering 2-bladed rotor, unlike for the ideally twisted rotor geometry. The broadband noise prediction for the optimum hovering 2-bladed rotor from the higher-dissipation case at the coarse temporal resolution was also seen to predict a tone centered around approximately 8.5 kHz, which was similar in amplitude to the measured tone around 16.5 kHz.

Christopher S. Thurman↗

NASA NTRS1985

Structural load challenges during space shuttle development

The challenges that resulted from the unique configuration of the space shuttle and capabilities developed to meet these challenges are described. The methods and the organization that were developed to perform dynamic loads analyses on the space shuttle configuration and to assess dynamic data developed after design are discussed. Examples are presented from the dynamic loads analysis of the lift-off and maximum dynamic pressure portion of ascent. Also shown are orbital flight test results, for which selected predicted responses are compared to measured data for the lift-off and high-dynamic-pressure times of ascent. These results have generally verified the design analysis. However, subscale testing was found to be deficient in predicting full-scale results in two areas: the ignition overpressure at lift-off and the aerodynamics/plume interactions at high-q boost. In these areas, the results of the flight test program were accommodated with no impact to the vehicle design.

Mackey, A. C.↗

NASA NTRS1988

The spectral bidirectional reflectance of snow

A radiative transfer model for the bidirectional reflectance-distribution function (BRDF) shows that snow is moderately anisotropic in the near-infrared wavelengths. Although the directional-hemispherical albedo of snow decreases as the grains become larger, the forward scattering also increases, with the result that the illumination and viewing geometry must be considered when interpreting physical properties of the surface layer of the snow pack from remote sensing data. Measurements of the BRDF for a variety of snow conditions were made throughout the winter and spring seasons with a spectroradiometer, for wavelengths from 0.38 to 1.11 microns. Coincident with these the surface grain properties were analyzed by stereological methods. The data show that Mie scattering calculations using an equivalent spherical radius match the directional-hemispherical reflectance, but the BRDF usually shows a small peak in the backscattered direction that would not occur from spherical grains. The sphere with the same surface-to-volume ratio as the ice grains is used as the equivalent sphere.

Dozier, J.↗