Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “liquid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Imaging, understanding, and control of nanoscale materials transformations

The development of liquid cells for transmission electron microscopy has enabled breakthroughs in our ability to follow nanoscale structural, morphological, or chemical changes during materials growth and applications. Time-resolved high-resolution imaging and chemical analysis through liquids opened the opportunity to capture nanoscale dynamic processes of materials, including reaction intermediates and the transformation pathways. In this article, a series of work is highlighted with topics ranging from liquid cell developments to in situ studies of nanocrystal growth and transformations, dendrite formation, and suppression of lithium dendrites through in situ characterization of the solid–electrolyte interphase chemistry. The understanding garnered is expected to accelerate the discovery of novel materials for applications in energy storage, catalysis, sensors, and other functional devices.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Cryogenic foil bearing turbopumps

Cryogenic foil bearing turbopumps offer high reliability and low cost. The fundamental cryogenic foil bearing technology has been validated in both liquid hydrogen and liquid oxygen. High load capacity, excellent rotor dynamics, and negligible bearing wear after over 100 starts and stops, and over many hours of testing, were observed in both fluids. An experimental liquid hydrogen foil bearing turbopump was also successfully demonstrated. The results indicate excellent stability, high reliability, wide throttle-ability, low bearing cooling flow, and two-phase bearing operability. A liquid oxygen foil bearing turbopump has been built and is being tested at NASA MSFC.

Gu, Alston L.↗
NASA NTRS1999

A Design Tool for Liquid Rocket Engine Injectors

A practical design tool for the analysis of flowfields near the injector face has been developed and used to analyze the Fastrac engine. The objective was to produce a computational design tool which was detailed enough to predict the interactive effects of injector element impingement angles and points and the momenta of the individual orifice flows. To obtain a model which could be used to simulate a significant number of individual orifices, a homogeneous computational fluid dynamics model was developed. To describe liquid and vapor sub- and super-critical flows, the model included thermal and caloric equations of state which were valid over a wide range of pressures and temperatures. A homogeneous model was constructed such that the local state of the flow was determined directly, i.e. the quality of the flow was calculated. Such a model does not identify drops or their distribution, but it does allow the flow along the injector face and into the acoustic cavity to be predicted. It also allows the film coolant flow to be accurately described. The initial evaluation of the injector code was made by simulating cold flow from an unlike injector element and from a like-on-like overlapping fan (LOL) injector element. The predicted mass flux distributions of these injector elements compared well to cold flow test results. These are the same cold flow tests which serve as the data base for the JANNAF performance prediction codes. The flux distributions 1 inch downstream of the injector face are very similar; the differences were somewhat larger at further distances from the faceplate. Since the cold flow testing did not achieve good mass balances when integrations across the entire fan were made, the CFD simulation appears to be reasonable alternative to future cold flow testing. To simulate the Fastrac, an RP-1/LOX combustion model must be chosen. This submodel must be relatively simple to accomplish three-dimensional, multiphase flow simulations. Single RP-1 pyrolysis and partial oxidation steps were chosen and the combustion was completed with the wet CO mechanism. Soot was also formed with a single global reaction. To validate the combustion submodel, global data from gas generator tests and from subscale motor test were used to predict qualitatively correct mean molecular weights, temperature, and soot levels. Because such tests do not provide general kinetics rates, the methodology is not necessarily appropriate for other than rocket type flows conditions. Soot predictions were made so that radiation heating to the motor walls can be made. These initial studies of the Fastrac were for a small region close to the injector face and chamber wall which included a segment of the acoustic cavity. The region analyzed includes 11 individual orifice holes to represent the LOL elements and the H2 film coolant holes. Typical results of this simulation are shown in Figure 1. At this point the only available test data to verify the predictions are temperatures measured in the acoustic cavity. These temperatures are in reasonable agreement at about 2000R (1111 K). Future work is expected to include improving the computational efficiency or the CFD model and/or using more computer capacity than the single Pentium PC with which these simulations were made.

Farmer, Richard C.↗
DOE OSTI2022

Thiocyanate Ions Form Antiparallel Populations at the Concentrated Electrolyte/Charged Surfactant Interface

Anions play significant roles in the separation of lanthanides and actinides. The molecular-scale details of how these anions behave at aqueous interfaces are not well understood, especially at high ionic strengths. Here, we describe the interfacial structure of thiocyanate anions at a soft charged interface up to 5 M bulk concentration with combined classical and phase-sensitive and molecular dynamics (MD) simulations. At low concentrations thiocyanate ions are mostly oriented with their sulfur end pointing toward the charged surfactants. In this work, the VSFG signal reaches a plateau at around 100 mM bulk concentration, followed by significant changes above 1 M. At high concentrations a new thiocyanate population emerges with their sulfur end pointing toward the bulk liquid. The –CN stretch frequency is different for up and down oriented SCN – ions, indicating different coordination environments. These results provide key molecular-level insights for the interfacial behavior of complex anions in highly concentrated solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

EELS Studies of Cerium Electrolyte Reveal Substantial Solute Concentration Effects in Graphene Liquid Cells

Graphene liquid cell transmission electron microscopy is a powerful technique to visualize nanoscale dynamics and transformations at atomic resolution. However, the solution in liquid cells is known to be affected by radiolysis, and the stochastic formation of graphene liquid cells raises questions about the solution chemistry in individual pockets. In this study, electron energy loss spectroscopy (EELS) was used to evaluate a model encapsulated solution, aqueous CeCl 3 . First, the ratio between the O K-edge and Ce M-edge was used to approximate the concentration of cerium salt in the graphene liquid cell. It was determined that the ratio between oxygen and cerium was orders of magnitude lower than what is expected for a dilute solution, indicating that the encapsulated solution is highly concentrated. To probe how this affects the chemistry within graphene liquid cells, the oxidation of Ce 3+ was measured using time-resolved parallel EELS. Here, it was determined that Ce 3+ oxidizes faster under high electron fluxes, but reaches the same steady-state Ce 4+ concentration regardless of flux. The time-resolved concentration profiles enabled direct comparison to radiolysis models, which indicate rate constants and g-values of certain molecular species are substantially different in the highly concentrated environment. Finally, electron flux-dependent gold nanocrystal etching trajectories showed that gold nanocrystals etch faster at higher electron fluxes, correlating well with the Ce 3+ oxidation kinetics. Understanding the effects of the highly concentrated solution in graphene liquid cells will provide new insight on previous studies and may open up opportunities to systematically study systems in highly concentrated solutions at high resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impact of disorder on dynamics and ordering in the honeycomb-lattice iridate Na 2 IrO 3

Kitaev's honeycomb spin-liquid model and its proposed realization in materials such as α-RuCl 3 , Li 2 IrO 3 , and Na 2 IrO 3 continue to present open questions about how the dynamics of a spin liquid are modified in the presence of non-Kitaev interactions as well as the presence of inhomogeneities. Here we use 23 Na nuclear magnetic resonance to probe both static and dynamical magnetic properties in single-crystal Na 2 IrO 3 . We find that the NMR shift follows the bulk susceptibility above 30 K but deviates from it below; moreover below T N the spectra show a broad distribution of internal magnetic fields. Both of these results provide evidence for inequivalent magnetic sites at low temperature, suggesting inhomogeneities are important for the magnetism. The spin-lattice relaxation rate is isotropic and diverges at T N , suggesting that the Kitaev cubic axes may control the critical quantum spin fluctuations. Finally, in the ordered state, we observe gapless excitations, which may arise from site substitution, emergent defects from milder disorder, or possibly be associated with nearby quantum paramagnetic states distinct from the Kitaev spin liquid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Colloidal Nafion Particles: Are Cylinders Ubiquitous?

Colloidal Nafion morphology plays a critical role in determining the performance of fuel cells and electrolyzers. While small-angle neutron scattering (SANS) studies previously described Nafion in liquid media as dispersed cylinders, the analysis remains nonunique with multiple possible morphological descriptions of the data. Here, using SANS and all-atomistic molecular dynamics, we confirm that Nafion morphology in liquid media differs substantially depending on dispersing agent and dispersion method. H + Nafion dispersed in N-methyl pyrrolidone forms swollen cluster particles with physically cross-linked ionic groups. Scattering profiles from dispersed Nafion membrane have a large structure factor feature not observed for redispersed Nafion D-521. H + Nafion dispersed in water has a highly elongated cylindrical morphology (radius = 10 ± 1.5 Å, height = 358 ± 4.7 Å) with fully dissociated and solvated sulfonic acid groups on the particle wall. In conclusion, these results highlight an important discrepancy between the methods of preparing Nafion dispersions and the use of simplified analysis techniques to describe Nafion morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Impact of fragment formation on shear viscosity in the nuclear liquid-gas phase transition region

Within the improved quantum molecular dynamics (ImQMD) model we follow the evolution of nuclear matter for planar Couette flow in a periodic box. We focus on the region of liquid-gas phase transition and extract the shear viscosity coefficient from the local stress tensor, directly following the viscosity definition. Here, by switching on and off the mean field and thus inducing the phase transition, we are able to observe the impact of clumping in the phase transition region on the viscosity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Leakoff assessment of nanoparticle-stabilized CO 2 foams for fracturing applications

The leakoff of multiphase systems through porous media is a complicated process. In this study, we have designed an experimental setup that is used to assess the leakoff of the liquid and gas phase under pressurized conditions. The novelty of this study is that while most previous studies utilized fluid/gas in the aqueous phase, nanoparticles are introduced in this study, which formed a solid/fluid/gas multiphase system to boost foam performance and reduce leakoff. In the parametric experimental analysis, the effects of foam quality, core permeability, surfactant concentration, and polymer concentration on the dynamic and static leakoff rates of liquid and gas are evaluated. It was found that core permeability affects the leakoff of foam the most with a leakoff coefficient of up to 1.37015 $ft/\sqrt{min}$ for gas and up to 0.1056 $ft/\sqrt{min}$ for liquid under the experiment settings herein. The leakoff rate of gas is generally several magnitudes higher than that of the liquid. When CO 2 gas is present in the foam, the leakoff coefficient falls in the range between 0 and 1.37015 $ft/\sqrt{min}$ for gas, and between 0.0005 and 0.1056 $ft/\sqrt{min}$ for liquid. Finally, the methodology and results of this study shed light on the mechanistic understanding of the leakoff properties of multiphase systems and could be used to assist the design of foam fracturing for reservoir stimulation.

03 NATURAL GAS↗
DOE OSTI2020

Topology control of human fibroblast cells monolayer by liquid crystal elastomer

Eukaryotic cells in living tissues form dynamic patterns with spatially varying orientational order that affects important physiological processes such as apoptosis and cell migration. The challenge is how to impart a predesigned map of orientational order onto a growing tissue. Here, we demonstrate an approach to produce cell monolayers of human dermal fibroblasts with predesigned orientational patterns and topological defects using a photoaligned liquid crystal elastomer (LCE) that swells anisotropically in an aqueous medium. The patterns inscribed into the LCE are replicated by the tissue monolayer and cause a strong spatial variation of cells phenotype, their surface density, and number density fluctuations. Unbinding dynamics of defect pairs intrinsic to active matter is suppressed by anisotropic surface anchoring allowing the estimation of the elastic characteristics of the tissues. The demonstrated patterned LCE approach has potential to control the collective behavior of cells in living tissues, cell differentiation, and tissue morphogenesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Phenomenology of Intermediate Molecular Dynamics at Metal-Oxide Interfaces

Reaction intermediates buried within a solid-liquid interface are difficult targets for physiochemical measurements. They are inherently molecular and locally dynamic, while their surroundings are extended by a periodic lattice on one side and the solvent dielectric on the other. Challenges compound on a metal-oxide surface of varied sites and especially so at its aqueous interface of many prominent reactions. Recently, phenomenological theory coupled with optical spectroscopy has become a more prominent tool for isolating the intermediates and their molecular dynamics. The following article reviews three examples of the SrTiO3-aqueous interface subject to the oxygen evolution from water: reaction-dependent component analyses of time-resolved intermediates, a Fano resonance of a mode at the metal-oxide–water interface, and reaction isotherms of metastable intermediates. The phenomenology uses parameters to encase what is unknown at a microscopic level to then circumscribe the clear and macroscopically tuned trends seen in the spectroscopic data.

Chemistry↗
DOE OSTI2020

Investigating Liquid Water Transport in Different Pore Structure of Gas Diffusion Layers for PEMFC Using Lattice Boltzmann Method

Proton exchange membrane fuel cells (PEMFC) require a gas diffusion layer (GDL) to aid in the transport of liquid fuel to the catalyst layer. In this work, direct modeling using the Lattice Boltzmann Method (LBM) was applied to X-ray CT scans of four different carbon gas diffusion layers to understand the mass transport properties through the samples. Three injection orientations were used to study local saturation levels, water evolution through the sample, and mass transport behavior at breakthrough conditions. The LBM, combined with computational fluid dynamic modeling techniques, can accurately predict liquid saturation at the macro and micro scale, which provides more insight into the mass transport phenomena through the GDL. The change of pore structure and orientation in both the in-plane and through-plane determines the path that liquid water must take, which could aid or impact PEMFC performance. The outcomes from this work will also benefit any research that needs knowledge of internal mass transport qualities of gas diffusion media.

Sepe, M.↗
NASA NTRS2023

Solidification Furnace for In Situ Observation of Bulk Transparent Systems and Image Analysis Methods

This paper aims to describe the experimental framework of the Directional Solidification Insert (DSI), installed onboard the International Space Station (ISS), dedicated to the in situ and real-time characterization of the dynamic selection of the solid-liquid interface morphology in bulk samples of transparent materials under diffusive growth conditions. The in situ observation of the solid-liquid interface is an invaluable tool for gaining knowledge on the time-evolution of the interface pattern because the initial morphological instability evolves nonlinearly and undergoes a reorganization process. The result of each experiment, characterized by the sample concentration, a thermal gradient and a pulling rate, is a large number of images. Interpretation of these images necessitates a robust identification of each cell/dendrite position and size during the entire solidification. Several image analysis methods have been developed to achieve this goal reliably despite varying contrast and noise levels, and are described in details. Typical solidification experiments are presented and the dynamics of the pattern formation are analyzed to illustrate the application of the image analysis methods.

Programming languages↗
DOE OSTI2025

Thermodynamics of Liquid Uranium from Atomistic and Ab Initio Modeling

We present thermodynamic properties for liquid uranium obtained from classical molecular dynamics (MD) simulations and the first-principles theory. The coexisting phases method incorporated within MD modeling defines the melting temperature of uranium in good agreement with the experiment. The calculated melting enthalpy is in agreement with the experimental range. Classical MD simulations show that ionic contribution to the total specific heat of uranium does not depend on temperature. The density of states at the Fermi level, which is a crucial parameter in the determination of the electronic contribution to the total specific heat of liquid uranium, is calculated by ab initio all electron density functional theory (DFT) formalism applied to the atomic configurations generated by classical MD. The calculated specific heat of liquid uranium is compared with the previously calculated specific heat of solid γ-uranium at high temperatures. The liquid uranium cannot be supercooled below T sc ≈ 800 K or approximately about 645 K below the calculated melting point, although, the self-diffusion coefficient approaches zero at T D ≈ 700 K. Uranium metal can be supercooled about 1.5 times more than it can be overheated. The features of the temperature hysteresis are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Liquid ToF-SIMS revealing the oil, water, and surfactant interface evolution

Bilge water from ships is regarded as a major pollutant in the marine environment. Bilge water exists in a stable oil-in-water (O/W) emulsion form. However, little is known about the O/W liquid–liquid (l–l) interface. Traditional bulk characterization approaches are not capable of capturing the chemical changes at the O/W l–l interface. Although surfactants are deemed essential in droplet formation, their roles in bilge water stabilization have not been fully revealed. We have utilized novel in situ chemical imaging tools including in situ scanning electron microscopy (SEM) and in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS) to study the evolving O/W interface using a NAVY bilge model for the first time. The droplet size distribution (DSD) does not change significantly without the addition of X-100 surfactants under static or rocking conditions. Both the oil components and the water clusters are shown to evolve over time at the O/W droplet interface by in situ liquid SIMS imaging. Of particular interest to droplet stabilization, the contribution of surfactants to the aged bilge droplets becomes more significant as the droplet size increases. The higher mass surfactant component does not appear on the droplet surface immediately while many lower mass surfactants are solvated inside the droplet. We have provided the first three-dimensional images of the evolving O/W interface and demonstrated that in situ surface chemical mapping is powerful enough to reveal the complex and dynamic l–l interface in the liquid state. Our observational insights suggest that surfactants are important in mediating droplet growth and facilitating effective separation of bilge water emulsion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Computational Fluid Dynamics (CFD) Simulations of Taylor Bubbles in Vertical and Inclined Pipes with Upward and Downward Liquid Flow

Summary Two-phase flow is a common occurrence in pipes of oil and gas developments. Current predictive tools are based on the mechanistic two-fluid model, which requires the use of closure relations to predict integral flow parameters such as liquid holdup (or void fraction) and pressure gradient. However, these closure relations carry the highest uncertainties in the model. In particular, significant discrepancies have been found between experimental data and closure relations for the Taylor bubble velocity in slug flow, which has been determined to strongly affect the mechanistic model predictions (Lizarraga-García 2016). In this work, we study the behavior of Taylor bubbles in vertical and inclined pipes with upward and downward flow using a validated 3D computational fluid dynamics (CFD) approach with level set method implemented in a commercial code. A total of 56 cases are simulated, covering a wide range of fluid properties, pipe diameters, and inclination angles: Eo ∈ [10, 700]; Mo ∈ [1×10–6, 5×103]; ReSL ∈ [–40, 10]; θ ∈ [5°, 90°]. For bubbles in vertical upward flows, the simulated distribution parameter, C0, is successfully compared with an existing model. However, the C0 values of downward and inclined slug flows where the bubble becomes asymmetric are shown to be significantly different from their respective vertical upward flow values, and no current model exists for the fluids simulated here. The main contributions of this work are (1) the relatively large 3D numerical database generated for this type of flow, (2) the study of the asymmetric nature of inclined and some vertical downward slug flows, and (3) the analysis of its impact on the distribution parameter, C0.

Engineering↗
DOE OSTI2025

On optimal control of hybrid dynamical systems using complementarity constraints

Optimal control for switch-based dynamical systems is a challenging problem in the process control literature. In this study, we model these systems as hybrid dynamical systems with finite number of unknown switching points and reformulate them using non-smooth and non-convex complementarity constraints as a mathematical program with complementarity constraints (MPCC). We utilize a moving finite element based strategy to discretize the differential equation system to accurately locate the unknown switching points at the finite element boundary and achieve high-order accuracy at intermediate non-collocation points. We propose a globalization approach to solve the discretized MPCC problem using a mixed NLP/MILP-based strategy to converge to a non-spurious first-order optimal solution. The method is tested on three dynamic optimization examples, including a gas–liquid tank model and an optimal control problem with a sliding mode solution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Probing chiral Kitaev spin liquids via dangling boundary fermions

Identifying experimental probes capable of diagnosing extreme quantum behavior is widely regarded as one of the foremost challenges in modern condensed matter physics. Here, we propose a novel approach for detecting chiral Kitaev spin-liquid states through measurements of the local dynamical spin structure factor on the boundary using scanning tunneling microscopy (STM). We specifically focus on unpaired (“dangling”) Majorana fermions, which naturally emerge along boundaries of Kitaev spin liquids, and can serve as indicators of chiral boundary modes under broad conditions, thereby offering a clear signature of these exotic quantum states.

Zhang, Shang-Shun [University of Tennessee, Knoxvi↗