Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light pulses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Survey of spatio-temporal couplings throughout high-power ultrashort lasers

The investigation of spatio-temporal couplings (STCs) of broadband light beams is becoming a key topic for the optimization as well as applications of ultrashort laser systems. This calls for accurate measurements of STCs. Yet, it is only recently that such complete spatio-temporal or spatio-spectral characterization has become possible, and it has so far mostly been implemented at the output of the laser systems, where experiments take place. In this survey, we present for the first time STC measurements at different stages of a collection of high-power ultrashort laser systems, all based on the chirped-pulse amplification (CPA) technique, but with very different output characteristics. This measurement campaign reveals spatio-temporal effects with various sources, and motivates the expanded use of STC characterization throughout CPA laser chains, as well as in a wider range of types of ultrafast laser systems. In this way knowledge will be gained not only about potential defects, but also about the fundamental dynamics and operating regimes of advanced ultrashort laser systems.

Jeandet, Antoine (ORCID:0000000345493067)↗
DOE OSTI2021

Searching for Interstellar Quantum Communications

The modern search for extraterrestrial intelligence began with the seminal publications of Cocconi & Morrison and Schwartz & Townes, who proposed searching for narrowband signals in the radio spectrum and optical laser pulses. Over the last six decades, more than 100 dedicated search programs have targeted these wavelengths, all with null results. All of these campaigns searched for classical communications, that is, for a significant number of photons above a noise threshold, with the assumption of a pattern encoded in time and/or frequency space. I argue that future searches should also target quantum communications. They are preferred over classical communications with regard to security and information efficiency, and they would have escaped detection in all previous searches. The measurement of Fock state photons or squeezed light would indicate the artificiality of a signal. I show that quantum coherence is feasible over interstellar distances and explain for the first time how astronomers can search for quantum transmissions sent by ETI to Earth using commercially available telescopes and receiver equipment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Optically Addressable Light Valve Based on a GaN:Mn Photoconductor

Semi-insulating manganese-doped gallium nitride (GaN:Mn) layers epitaxially grown on unintentionally doped GaN substrates were used as photoconductors in optically addressable light valves (OALVs) to withstand higher operational laser fluences compared to current state-of-the-art OALVs where bismuth silicon oxide (BSO; Bi 12 SiO 20 ) layers are used as photoconductors. GaN:Mn promises to be an exciting material for optoelectronic operations due to its large laser fluence handling capability and photoresponsivity near the band edge. The laser damage thresholds for the semi-insulating epitaxial GaN:Mn layer and the n-type substrate layer were measured to be 2.4 and 4.2 J/cm 2 , respectively. These are 6–10 times higher than that of BSO (0.4 J/cm 2 ). These measurements were performed by exposing ~200 sites on the samples to increasing fluence levels from a Gaussian pulsed Nd:YAG laser system (1064 nm) operating at a 5 Hz repetition rate with a 3 ns pulse width. Photoresponsivity of the GaN:Mn material was investigated at discrete wavelengths of 447, 405, and 380 nm. Further, the peak photoresponsivity was observed under an illumination wavelength of 380 nm and is attributed to stronger absorption. The OALV was fabricated by attaching a 110-μm-thick GaN:Mn layer grown on a 280-μm-thick n-GaN layer to a 3-mm-thick BK7 optical window. A twisted nematic E7 liquid crystal was introduced to the 5 μm gap between the two components. Transmission levels of >90% were achieved for the fabricated OALVs for a peak voltage of 40 V, constrained by transmission “bleed-through”.

36 MATERIALS SCIENCE↗
DOE OSTI2022

System and method for determining absolute carrier-envelope phase of ultrashort laser pulses

A system for determining an absolute carrier-envelope phase (CEP) of ultrashort laser pulses includes a laser system for generating a laser beam including ultrashort optical pulses of a duration of less than 10 fs, an ultrabroadband quarter-wave plate configured to polarize the laser beam, and a gas jet emitting a continuous jet stream into the laser beam. The system includes focusing optics to adjust a focal spot of the laser beam to the gas jet, and a detector arrangement including a beam block and a microchannel plate (MCP) imaging detector, wherein the laser beam is directed to the detector arrangement. The method involves using angular streaking to determine the absolute CEP of both elliptically and linearly polarized light.

Li, Wen↗
DOE OSTI2025

Spatio-spectral optical fission in time-varying subwavelength layers

Transparent conducting oxides are highly doped semiconductors that exhibit favourable optical features compared with metals, including reduced material losses, tuneable electronic and optical properties, and enhanced damage thresholds. Recently, the photonic community has renewed its attention towards these materials, recognizing their remarkable nonlinear optical properties in the near-infrared spectrum. The exceptionally large and ultrafast change in the refractive index, which can be optically induced in these compounds, extends beyond the boundaries of conventional perturbative analysis and makes this class of materials the closest approximation to a time-varying system. Here we report the spatio-spectral fission of an ultrafast pulse trespassing a thin film of aluminium zinc oxide with a non-stationary refractive index. By applying phase conservation to this time-varying layer, our model can account for both space and time refraction and explain, in quantitative terms, the spatial separation of both spectrum and energy. Our findings represent an example of extreme nonlinear phenomena on subwavelength propagation distances, which provides new insights into transparent conducting oxides’ transient optical properties. This can be critical for the ongoing research on photonic time crystals, on-chip generation of non-classical states of light, integrated optical neural networks, ultrafast beam steering and frequency-division multiplexing.

integrated optics↗
DOE OSTI2021

Epitaxial Thin Films of a Chalcogenide Perovskite

Chalcogenide perovskites have emerged as a new class of optoelectronic materials, especially for photovoltaic applications, but fundamental properties and applications of chalcogenide perovskites remain limited due to the lack of high-quality thin films. In this paper, we report direct epitaxial thin film growth of BaZrS 3 , a prototypical chalcogenide, by pulsed laser deposition. X-ray diffraction studies show that the films are strongly textured out-of-plane and have a clear in-plane epitaxial relationship with the substrate. Electron microscopy studies confirm the presence of epitaxy for the first few layers of the film at the interface, even though away from the interface, the films are polycrystalline with many extended defects, suggesting the potential for further improvement in growth. X-ray reflectivity and atomic force microscopy show smooth film surfaces and interfaces between the substrate and the film. The films show strong light absorption near the band edge and photoluminescence in the visible region, validating BaZrS 3 as a suitable candidate for ultrathin front absorbers in tandem solar cells. The photodetector devices show fast and efficient photo response with the highest ON/OFF ratio reported for BaZrS 3 films thus far. Our study opens up opportunities to use high quality thin films of chalcogenide perovskites to probe fundamental physical phenomena in thin films and heterostructures and also in photovoltaic and optoelectronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Relativistic flying laser focus by a laser-produced parabolic plasma mirror

Here, the question of electromagnetic field intensification towards the values typical for strong field quantum electrodynamics is of fundamental importance. One of the most promising intensification schemes is based on the relativistic-flying mirror concept, which shows that the electromagnetic radiation reflected by the mirror will be frequency upshifted by a factor of 4γ 2 (γ is the Lorentz factor of the mirror). In laser-plasma interactions, such a mirror travels with relativistic velocities through plasma and typically has a parabolic form, which is advantageous for light intensification. Thus, a relativistic-flying parabolic mirror reflects the counterpropagating radiation in the form of a focused and flying electromagnetic wave with a high frequency. The relativistic-flying motion of the laser focus makes the electric and magnetic field distributions of the focus complicated, and the mathematical expressions describing the field distributions of the focus become of fundamental interest. We present analytical expressions describing the field distribution formed by an ideal flying mirror which has a perfect reflectance over the entire surface and wavelength range. The peak field strength of an incident laser pulse with a center wavelength of λ 0 and an effective beam radius of w e is enhanced by a factor proportional to γ 3 (w e /λ 0 ) in the relativistic limit. Electron-positron pair production is investigated in the context of invariant fields based on the enhanced electromagnetic field. The pair production rate under the relativistic-flying laser focus is modified by the Lorentz γ-factor and the beam radius-wavelength ratio (w e /λ 0 ). We show that the electron-positron pairs can be created by colliding two counterpropagating relativistic-flying laser focuses in vacuum, each of which is formed when a 180 TW laser pulse is reflected by a relativistic-flying parabolic mirror with γ=12.2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Spectral broadening and pulse shaping in the deep ultraviolet

Here, we report the generation and shaping of ∼20 femtosecond pulses in the deep ultraviolet (DUV). Our approach combines spectral broadening in a stretched hollow-core fiber with compression and shaping via an acousto-optic modulator-based pulse shaper. The pulse shaper allows for automatic compression, useful for in-air delivery of pulses to two-dimensional (2D) spectroscopy and other time-resolved experiments. Unlike previous DUV pulse generation schemes that lack phase stability, our method enables programmable generation of phase-locked pulse-pairs with attosecond-level stability. We demonstrate pulse characterization via self-diffraction frequency-resolved optical gating and dispersion scan methods in the DUV and validate performance through a pump-probe experiment resolving electronic dynamics on attosecond timescales.

Codere, Julia [Stony Brook Univ., NY (United State↗
DOE OSTI2022

Active Cancellation of Servo-Induced Noise on Stabilized Lasers via Feedforward

Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large “servo bumps” that can have deleterious effects for certain applications. The prevailing approach to filtering this noise is to pass the laser through a high-finesse optical cavity, which places constraints on the system design. Here, we propose and demonstrate a different approach where a frequency error signal is derived from a beat note between the laser and the light that passes through the reference cavity. The phase noise derived from this beat note is fed forward to an electro-optic modulator after the laser, carefully accounting for relative delay, for real-time frequency correction. With a hertz-line-width laser, we show ≳20 dB noise suppression at the peak of the servo bump (approximately 250 kHz) and a noise-suppression bandwidth of approximately 5 MHz—well beyond the servo bump. By simulating the Rabi dynamics of a two-level atom with our measured data, we demonstrate substantial improvements to the pulse fidelity over a wide range of Rabi frequencies. Here, our approach offers a simple and versatile method for obtaining a clean spectrum of a narrow-line-width laser, as required in many emerging applications of cold atoms, and is readily compatible with commercial systems that may even include wavelength conversion.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Ultrafast snapshots of terahertz electric potentials across ring-shaped quantum barriers

Probing the time evolution of the terahertz electric field within subwavelength dimensions plays a crucial role in observing the nanoscale lightwave interactions with fundamental excitations in condensed-matter systems and in artificial structures, such as metamaterials. Here, we propose a novel probing method for measuring terahertz electric potentials across nanogaps using a combination of optical and terahertz pulse excitations. To achieve this, we employ ring-shaped nanogaps that enclose a metallic island, allowing us to capture tunneling charges when subjected to terahertz electromagnetic pulse illumination. By controlling and manipulating the terahertz tunneling charges through a focused optical gate pulse, we can obtain the terahertz potential strength as a function of spatial coordinates and time delays between pulses. To accurately quantify the time evolution of terahertz electric potential across quantum barriers, we carefully calibrate the recorded nonlinear tunneling current. Its on-resonance and off-resonance behaviors are also discussed, providing valuable insights into the antenna’s characteristics and performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Fast photodiode arrays for high frequency fluctuation measurements of reconnecting flux ropes

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1–5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented.

Instruments & Instrumentation↗
DOE OSTI2020

Refractive Guide Switching a Regenerative Amplifier Free-Electron Laser for High Peak and Average Power Hard X Rays

In this work, we present an x-ray regenerative amplifier free-electron laser design capable of producing fully coherent hard x-ray pulses across a broad tuning range at a high steady state repetition rate. The scheme leverages a strong undulator taper and an apertured diamond output-coupling cavity crystal to produce both high peak and average spectral brightness radiation that is 2 to 3 orders of magnitude greater than conventional single-pass self-amplified spontaneous emission free-electron laser amplifiers. Refractive guiding in the postsaturation regime is found to play a key role in passively controlling the stored cavity power. The scheme is explored both analytically and numerically in the context of the Linac Coherent Light Source II High Energy upgrade.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Spatiotemporal control of two-color terahertz generation

A laser pulse composed of a fundamental and properly phased second harmonic exhibits an asymmetric electric field that can drive a time-dependent current of photoionized electrons. The current produces an ultrashort burst of terahertz (THz) radiation. When driven by a conventional laser pulse, the THz radiation is emitted into a cone with an angle determined by the dispersion of the medium. Here we demonstrate that the programmable-velocity intensity peak of a spatiotemporally structured, two-color laser pulse can be used to control the emission angle, focal spot, and spectrum of the THz radiation. Of particular interest for applications, a structured pulse with a subluminal intensity peak can drive highly focusable, on-axis THz radiation. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Increased phase precision of spatial light modulators using irrational slopes: application to attosecond metrology

The ability of spatial light modulators (SLMs) to modify the amplitude and phase of light has proved them invaluable to the optics and photonics community. In many applications, the bit-depth of SLMs is a major limiting factor dictated by a digital processor. As a result, there is usually a compromise between refresh speed and bit-depth. Here, we present a method to increase the effective bit-depth of SLMs, which utilizes a linear slope, as is commonly applied to deal with the zeroth-order effect. This technique was tested using two interferometric transient absorption spectroscopy setups. Through the high harmonic generation in gases producing a train of attosecond pulses and harmonics from solids in the ultraviolet, two pulses are generated that interfere in the far field providing a measurement of the optical phase. An increase in the precision far beyond the limit dictated by the digital processor in the bit-depth was found.

Harrison, Geoffrey R. (ORCID:0000000152141866)↗
DOE OSTI2023

Optical stark effect on CdSe nanoplatelets with mid-infrared excitation for large amplitude ultrafast modulation

The optical Stark effect is a universal response of the electronic structure to incident light. In semiconductors, particularly nanomaterials, the optical Stark effect achieved with sub-band gap photons can drive large, narrowband, and potentially ultrafast changes in the absorption or reflection at the band gap through excitation of virtual excitons. Rapid optical modulation using the optical Stark effect is ultimately constrained, however, by the generation of long-lived excitons through multiphoton absorption. This work compares the modulation achievable using the optical Stark effect on CdSe nanoplatelets with several different pump photon energies, from the visible to mid-infrared. Despite expected lower efficiencies for spectrally-remote pump energies, infrared pump pulses can ultimately drive larger sub-picosecond optical Stark shifts of virtual excitons without creation of real excitons. Importantly, the CdSe nanoplatelets show subpicosecond shifts of the lowest excitonic resonance of up to 22 meV, resulting in change in absorption as large as 0.32 OD (49% increase in transmission), with a long-lived offset from real excitons less than 1% of the peak signal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Compact in-vacuum gamma-ray spectrometer for high-repetition rate PW-class laser–matter interaction

With the advent of high repetition rate laser facilities, novel diagnostic tools compatible with these advanced specifications are required. This paper presents the design of an active gamma-ray spectrometer intended for these high repetition rate experiments, with particular emphasis on functionality within a PW level laser-plasma interaction chamber’s extreme conditions. The spectrometer uses stacked scintillators to accommodate a broad range of gamma-ray energies, demonstrating its adaptability for various experimental setups. In addition, it has been engineered to maintain compactness, electromagnetic pulse resistance, and ISO-5 cleanliness requirements while ensuring high sensitivity. The spectrometer has been tested in real conditions inside the PW-class level interaction chamber at the BELLA center, LBNL. The paper further details the calibration process, which utilizes a 60 Co radioactive source, and describes the unfolding technique implemented through a stochastic minimization method.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Grayscale projection two-photon lithography using sub-diffraction motifs for ultrafast and precise nanoscale 3D printing

Rapid and high-fidelity nanoscale 3D printing is highly desirable, but it is difficult due to the tradeoff between speed and accuracy. Although optical projection techniques can massively scale up printing, fidelity is compromised due to the difficulty in precisely controlling the light dosage over the entire field. This challenge is typically addressed by using multiple projections, but it slows down printing. Here, we present grayscale projection two-photon lithography to overcome this tradeoff. Despite using a binary mask, it enables projecting more than 15,000 focal spots, each with independently tunable intensity. It advantageously leverages constraints imposed by optical diffraction to achieve grayscale tuning over the entire field at once. By directly tuning the focal spot intensities, we demonstrate suppression of proximity effects, compensation of non-uniform illumination, compensation of stitching artefacts, and rapid 3D printing with a single femtosecond pulse per layer. We demonstrate printing of nanowires as thin as 55 nm and achieve rates of 1.7 billion voxels/s and 215 mm 3 /hr.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Symmetric fielding of the largest diamond capsule implosions on the NIF

We present results for the largest diamond capsule implosions driven symmetrically on the National Ignition Facility (NIF) (inner radius of ~1050 μm) without the use of cross beam transfer in cylindrical Hohlraums. We show that the methodology of designing Hohlraum parameters in a semi-empirical way using an extensive database resulted in a round implosion. In addition, we show that the radiation flux symmetry is well controlled during the foot of the pulse and that swings in P2 symmetry between the inflight dense shell and hot spot are within ±4 μm and that swings around peak compression are also within the symmetry specification of ±4 μm. We observed a stronger dependence of symmetry on the capsule scale than previously observed and also observed enhanced inner beam propagation for experiments using a gas fill density of 0.3 mg/cm 3 and 1000 μm inner radius capsules. We have observed sufficient symmetry and mass remaining at near full NIF power and energy, up to 480 TW and 1.9 MJ, with little laser–plasma interactions (low laser backscattered light) and predict that this design could support extended NIF energy of up to 2.1 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗