Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Cation Site Occupancy in Natural Ferroan Double Carbonates via Mössbauer and Fe K-Edge X-ray Absorption Spectroscopy

Double carbonates are minerals with a calcite type structure with alternating cation layers composed of Ca and Mg/Fe coordinated by carbonate groups. While the perfectly ordered AB-stacked crystal is the thermodynamically most stable configuration, natural mineral formation pathways can leave signatures through kinetically trapped disorder such as AB antisite cation substitutions. This study probes the degree of cation ordering in naturally occurring double carbonate samples.in particular, the distribution of Fe A and B crystallographic sites (A site is Ca layer and B site is Mg/Fe layer). Mössbauer, X-ray diffraction, X-ray absorption fine structure (both X-ray absorption near edge structure, XANES, and extended x-ray absorption fine structure, EXAFS), and energy dispersive X-ray spectroscopies were used to collect a comprehensive experimental data set, which we interpret using density functional theory to elucidate the structural effects of cation disorder. Our results show that the A (nominally Ca) site can host a relatively high Fe fraction. We discuss the implications in terms of mineral formation.

Boglaienko, Daria (ORCID:0000000160943877)↗
DOE OSTI2025

Toward Quality Control in Perovskite Solar Cell Fabrication: Spot-Like Processing Defects Disrupt Charge Transport Layers and Promote Ag Metal Electrode Intrusion

Metal halide perovskite (MHP) photovoltaics provide high efficiencies with less stringent processing requirements than traditional photovoltaic materials. However, processing related defects must be suppressed as they can lead to decreases in initial device efficiency and potentially compromise long-term device operation. In this work we investigate morphological defects in MHP devices using luminescence imaging followed by in-depth structural and composition analysis using electron microscopy-based methods. We identify several different classes of spot-like processing-related defects and observe that a single device structure may contain multiple types of these defects. The presence of these defects in devices with different layer structures and absorber chemistries makes them relevant to the perovskite photovoltaic community as a whole. The defects are associated with voids in the perovskite layer, inclusions (glass, migrated Ag, dust), thickness variations, hole transport layer disruption with anomalous crystal growth, and electron transport layer disruptions that could allow Ag intrusion and lead to local shunts. As perovskite photovoltaic technology matures, mitigation of such defects is critical to improving not only initial performance but also the long-term stability required for industrial applications.

14 SOLAR ENERGY↗
DOE OSTI2024

Control of work functions of nanophotonic components

Work function is an essential material’s property playing important roles in electronics, photovoltaics, and more recently, in nanophotonics. We have studied effects of organic, and inorganic dielectric materials on work functions of Au films in single layered, and multilayered structures. We found that measured work function of metallic surfaces can be affected by dielectric materials situated 10–100 nm away from the metallic surface. We have found that, (i) the glass underneath ~ 50 nm gold slab reduces the work function of gold, (ii) Rh590:PMMA increases the work function of a gold film deposited on top of the polymer, and (iii) reduces it if Rh590:PMMA is deposited on top of Au. (iv) With increase of the Rh590 concentration in PMMA, n, the work function first decreases (at n < 64 g/l), and then increases (at n > 64 g/l). (v) The work function of a Fabry–Perot cavity or an MIM waveguide is almost the same as that of single Au films of comparable thickness. The experimental results can be qualitatively explained in terms of a simple model taking into account adhesion of charged molecules to a metallic surface, and formation of a double layer of charges accelerating or decelerating electrons exiting the metal and decreasing or increasing the work function.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phonon Spectroscopy in Antimony and Tellurium Oxides

α-Sb 2 O 3 (senarmontite), β-Sb 2 O 3 (valentinite), and α-TeO 2 (paratellurite) are compounds with pronounced stereochemically active Sb and Te lone pairs. The vibrational and lattice properties of each have been previously studied but often lead to incomplete or unreliable results due to modes being inactive in infrared or Raman spectroscopy. Here in this paper, we present a study of the relationship between bonding and lattice dynamics of these compounds. Mössbauer spectroscopy is used to study the structure of Sb in α-Sb 2 O 3 and β-Sb 2 O 3 , whereas the vibrational modes of Sb and Te for each oxide are investigated using nuclear inelastic scattering, and further information on O vibrational modes is obtained using inelastic neutron scattering. Additionally, vibrational frequencies obtained by density functional theory (DFT) calculations are compared with experimental results in order to assess the validity of the utilized functional. Good agreement was found between DFT-calculated and experimental density of phonon states with a 7% scaling factor. The Sb–O–Sb wagging mode of α-Sb 2 O 3 whose frequency was not clear in most previous studies is experimentally observed for the first time at ~340 cm -1 . Softer lattice vibrational modes occur in orthorhombic β-Sb 2 O 3 compared to cubic α-Sb 2 O 3 , indicating that the antimony bonds are weakened upon transforming from the molecular α phase to the layer-chained β structure. The resulting vibrational entropy increase of 0.45 ± 0.1 kB/Sb 2 O 3 at 880 K accounts for about half of the α–β transition entropy. The comparison of experimental and theoretical approaches presented here provides a detailed picture of the lattice dynamics in these oxides beyond the zone center and shows that the accuracy of DFT is sufficient for future calculations of similar material structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanostructures for Electrical Energy Storage (NEES) (2020 Final Technical Report)

Nanostructures for Electrical Energy Storage (NEES, www.efrc.umd.edu) was an Energy Frontier Research Center supported by the DOE Office of Science, Basic Energy Sciences, from 8/1/2009 to 7/31/2020. Led by the University of Maryland, NEES enjoyed extensive collaborations with its funded partners, including two DOE Laboratories and six universities. The NEES vision has been to reveal a set of scientific insights and design principles that can underpin a next-generation electrical energy storage approach, building on advances in nanoscale science and technology to achieve simultaneous high power and high energy over extended charge/discharge cycling. The vision is motivated by the recognition that scaling into the nano regime opens the door to new physical phenomena and that the tools enlisted in nanoscale research provide major new opportunities for the synthesis not only of materials at molecular scale but for structures at nano scale and above. NEES has translated this vision into its research program based on two observations. First, while the behavior of ions and electrons in electrolytes and in electrode materials is crucial to electrical energy storage (or more appropriately electrochemical energy storage), it is the transport of ion and electron charge between different structural components of a storage device that ultimately determine its performance. With it well recognized that the choice of electrode materials typically constrain ion transport kinetics as well as maximum ion concentration, the search for better electrode materials has been a primary driver of battery research. At the same time the synthesis of electrodes is typically based on aggregation of particles with varying size, shape, and orientation in the electrode. Together with the presence of additional materials to impart electrical conductivity and cohesion to the composite electrode, change in electrode materials is necessarily accompanied by structural changes at the nano/micro scale that are difficult to categorize and manage. From the beginning, NEES’ vision has been to create and study simpler, highly controlled spatial arrangements of known materials as battery components (electrodes, current collectors, and electrolyte) and to understand how design and structure above the molecular scale determines the energy storage performance available from known materials. Second, advances in nanoscience dramatically expanded the portfolio of synthesis methods, structural motifs, and new phenomena available for research. Some of these gave rapid access to new building blocks at the deep nanoscale (e.g., carbon nanotubes grown by self-assembly, nanoscale arrays formed by electrochemical self-alignment, monolayer films controlled by self-limiting reaction). Such advances served as the enabler for the NEES vision to be pursued experimentally through study of 3D structures created and controlled at the nano, micro, and meso scales. Here, we use meso as in the BES MESO Report, implying not only intermediate or varying length scales, but very much the way behavior is influenced by other factors including aggregation of nanocomponents at different densities and spatial configurations, statistical variations in the aggregates, hierarchical architectures in which they can be assembled, or local 3D configurations that result from the architectures. Over its life cycle, NEES has pursued two overarching goals: (1) to understand the scientific fundamentals of electrochemical storage from the nanoscale to the mesoscale; and (2) to create and learn from innovative, controlled, heterogeneous nanostructures, where such nanostructures can enable the first goal and serve as models for future paradigms in energy storage. Specific goals have included: Synthesize heterogeneous nanostructures comprised of multiple materials arranged in controlled fashion and characterize their behavior; Demonstrate and elucidate design principles for achieving simultaneous high power and high energy; Develop materials processes which enable precision control of thin layers and 3D structures; Investigate the impact of artificial interphases on electrode stability during ion insertion/deinsertion; Create dense arrays of nanostructures to understand how the architecture of these assemblies, along with nanostructure design, influences energy storage behavior at the mesoscale; Identify and understand the consequences of nanoconfinement and local inhomogeneities in 3D mesoscale arrays; Develop and apply computational models to stimulate, guide and interpret experiments.

25 ENERGY STORAGE↗
DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Sucrose‐Based Dense, Pure, and Highly‐Crystalline Graphitic Materials for Lithium‐Ion Batteries

At present, most synthetic graphite materials commonly used as anode active ingredients in lithium-ion cells are produced by graphitization of petroleum cokes. The carbon footprint associated with synthetic graphite production is significant. Thus, bio-derived and cheap precursors, such as saccharides, would be an attractive alternative for the sustainable production of graphitic carbons. However, they are non-graphitizing at temperatures as high as 3000 °C, preserving the curved, fullerene-like structure of graphene layers and microporosity. Consequently, many lithium ions are consumed during the formation of solid electrolyte interphase films and passivated in the nanovoids. Here, a method for the production of pure, crystalline, graphitic materials based on sucrose disposed of microporosity is presented, which also works with a variety of saccharides and other organic precursors of hard carbons—generally considered incapable of such transformation. This process employs catalytic graphitization by Si particles at high temperatures. Finally, the electrochemical response of such derived sucrose-based graphite in Li-ion half-cells demonstrated its feasibility to serve as an anode active material for rechargeable Li-ion batteries.

Si particles↗
DOE OSTI2021

Electronic structure of van der Waals ferromagnet CrI 3 from self-consistent vertex corrected GW approaches

Electronic structure of the layered van der Waals ferromagnet CrI 3 is studied with self consistent diagrammatic approaches beyond the GW approximation. Considerable improvement in the calculated band gap as compared to the non-self-consistent G0W0 results has been found. Certain spectral features in the valence bands discovered recently by the angle resolved photoemission spectroscopy, are reproduced better when we use full frequency dependent self energy. Density functional theory and the quasiparticle self-consistent GW method which are based on the frequency-independent self energy are unable to resolve these features. The non-locality effects in the diagrams beyond the GW approximation are large for both polarizability and self energy. This finding can potentially have an impact on the development of methods like the GW+DMFT (dynamical mean field theory).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Pioneering Microporous Layers for Proton-Exchange-Membrane Water Electrolyzers via Tape Casting

The imperative shift towards decarbonization necessitates the production of clean hydrogen through water electrolysis, powered by renewable energy sources. Among electrolyzer technologies, proton-exchange-membrane (PEM) systems emerge as a promising option for large-scale hydrogen generation due to their modular design and rapid response, aligning well with the intermittency of renewable energy. In this study, we employ a tape casting method to fabricate microporous layers (MPLs), both as a single layer and as a bilayer over commercial porous transport layers (PTLs), to further enhance performance of water electrolyzers. We demonstrate that microporous layers require adequate pore sizes to facilitate gas removal, preventing gas flooding and preserving electrolyzer performance. Our single layer microporous layers exhibit lower overpotentials compared to commercial sintered Ti PTLs by 142 mV at 4 A·cm ⁻2 . Moreover, we show that having an effective microporous layer enhances electrolyzer performance irrespective of the substrate used, offering avenues for cost reduction. We also investigate novel PTL structures with reduced tortuosity and integrated MPL fabricated via phase inversion tape casting, resulting in a performance enhancement of 92 mV. Our findings unravel the critical role of microporous layer structures and their impact on electrolyzer performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Solder hermetic sealing for OLEDs

An OLED device comprising a substrate with a top surface; a first electrode covering the top surface of the substrate; a first insulating structure patterned over a portion of the first electrode where the pattern defines an inside area of the first electrode that is completely surrounded by the insulating structure, and an outside area of the first electrode not covered by the insulating structure; at least one organic layer for light emission within the inside area defined by the insulating structure; a second electrode over the at least one organic layer within the inside area defined by the insulating structure and at least partially over the first insulating structure; a cover slip located at least over the second electrode in the inside area defined by the insulating structure; and an electrically conductive solder seal making a hermetic seal between the insulating structure and the cover slip where the solder seal is in electrical contact with the second electrode. The insulating structure is desirably made of glass frit.

42 ENGINEERING↗
DOE OSTI2020

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

The intrinsic poor thermal stability of layered LiNi x Co y Mn 1-x-y O 2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathode, we demonstrate that, the chemical and structural stability of the deep delithiated NCM cathodes are significantly affected by Co, rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co 4+ reduces prior to the reduction of Ni 4+ , and could thus prolong the Ni migration by occupying the tetrahedra sites, and hence postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni 4+ . Our results highlight the importance of evaluating the intrinsic role of compositional tuning on Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Dimensional Control of Octahedral Tilt in SrRuO 3 via Infinite-Layered Oxides

Manipulation of octahedral distortion at atomic scale is an effective means to tune the ground states of functional oxides. Previous work demonstrates that strain and film thickness are variable parameters to modify the octahedral parameters. However, selective control of bonding geometry by structural propagation from adjacent layers is rarely studied. Here we propose a new route to tune the ferromagnetism in SrRuO 3 (SRO) ultrathin layers by oxygen coordination of adjacent SrCuO 2 (SCO) layers. The infinite-layered CuO 2 exhibits a structural transformation from “planar-type” to “chain-type” with reduced film thickness. Two orientations dramatically modify the polyhedral connectivity at the interface, thus altering the octahedral distortion of SRO. The local structural variation changes the spin state of Ru and orbital hybridization strength, leading to a significant change in the magnetoresistance and anomalous Hall resistivity. Furthermore, these findings could launch investigations into adaptive control of functionalities in quantum oxide heterostructures using oxygen coordination.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Designing Moderately‐Solvating Electrolytes for High‐Performance Lithium–Sulfur Batteries

New electrolytes are critical for high‐energy lithium (Li)–sulfur (S) batteries (LSBs) to ensure their stability against Li metal anode and polysulfides (PSs) shuttling which hinder the large‐scale application of LSBs. In this study, the design principle of moderately solvating electrolytes (MSEs) for LSBs is demonstrated by using a multiple‐solvent system comprising of a highly solvating solvent, a weakly solvating solvent, and a non‐solvating solvent to create a well‐balanced electrolyte system. This resulting electrolyte significantly improves the cycle life of LSBs, achieving 300 cycles, which is twice as long as that of similar cells with the conventional electrolyte and it also ensures stable calendar life for at least seven months. The optimal MSE forms robust passivation layers enhancing the structural integrity of both S and Li metal electrodes after cycling. These virtues effectively hinder parasitic side reactions and self‐discharge behavior of LSBs. This electrolyte design principle is versatile and can be applied to other battery chemistries, providing a potential path toward the development of a more efficient and stable battery system. By addressing key challenges such as the instability of electrodes and shuttling of polysulfides, this electrolyte approach offers promising solutions for advancing LSB technology.

25 ENERGY STORAGE↗
DOE OSTI2024

Enhancing Chiroptoelectronic Activity in Chiral 2D Perovskites via Chiral–Achiral Cation Mixing

Rational design of chiral two-dimensional hybrid organic–inorganic perovskites is crucial to achieve chiroptoelecronic, spintronic, and ferroelectric applications. Here, in this study, an efficient way to manipulate the chiroptoelectronic activity of 2D lead iodide perovskites is reported by forming mixed chiral (R- or S-methylbenzylammonium (R-MBA + or S-MBA + )) and achiral (n-butylammonium (nBA + )) cations in the organic layer. The strongest and flipped circular dichroism signals are observed in (R/S-MBA 0.5 nBA 0.5 ) 2 PbI 4 films compared to (R/S-MBA) 2 PbI 4 . Moreover, the (R/S-MBA 0.5 nBA 0.5 ) 2 PbI 4 films exhibit pseudo-symmetric, unchanged circularly polarized photoluminescence peak as temperature increases. First-principles calculations reveal that mixed chiral–achiral cations enhance the asymmetric hydrogen-bonding interaction between the organic and inorganic layers, causing more structural distortion, thus, larger spin-polarized band-splitting than pure chiral cations. Temperature-dependent powder X-ray diffraction and pair distribution function structure studies show the compressed intralayer lattice with enlarged interlayer spacing and increased local ordering. Overall, this work demonstrates a new method to tune chiral and chiroptoelectronic properties and reveals their atomic scale structural origins.

2D perovskites↗
DOE OSTI2020

3D printing of metal-based materials for renewable energy applications

Large-scale renewable energy must overcome conversion and storage challenges before it can replace fossil fuels due to its intermittent nature. However, current sustainable energy devices still suffer from high cost, low efficiency, and poor service life problems. Recently, porous metal-based materials have been widely used as desirable cross-functional platforms for electrochemical and photochemical energy systems for their unique electrical conductivity, catalytic activity, and chemical stability. To tailor the porosity length scale, ordering, and compositions, 3D printing has been applied as a disruptive manufacturing revolution to create complex architected components by directly joining sequential layers into designed structures. In conclusion, this article intends to summarize cutting-edge advances of metal-based materials for renewable energy devices (e.g., fuel cells, solar cells, supercapacitors, and batteries) over the past decade.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Demonstration and analysis of volumetric additive manufacturing via sub-orbital spaceflight testing

Computed Axial Lithography (CAL) represents a significant advancement in the emerging field of Volumetric Additive Manufacturing (VAM). CAL addresses key limitations of traditional photopolymer additive manufacturing technologies, by eliminating the need for layering and support structures. Unlike conventional methods, CAL prints components by illuminating all points within a desired geometry simultaneously, using tomographic reconstruction to form the object in a single step. This unique approach eliminates the relative motion between the object and the precursor material, enabling faster printing speeds and reducing the waste associated with support structures. However, CAL parts require post-processing steps before they can be utilized. CAL's core attributes make it particularly suited for In-Space Manufacturing (ISM), due to its fast fabrication times, wide breadth of materials it can use, and minimized footprint. CAL has been successfully demonstrated in microgravity during parabolic flight experiments. However to fully validate and understand CAL's behaviour in microgravity, all manufacturing and post-processing steps must be integrated. In June 2024, we conducted SpaceCAL Mission 3, testing this entire workflow on a suborbital flight aboard Virgin Galactic's SpaceShipTwo. During ~140 s of microgravity, the system autonomously manufactured and post-processed four parts using PEGDA700 resin. Post-flight analysis showed that 2/4 parts were recognisable, while others were distorted due to bubble formation from residual water droplets, off-axis optical aberrations, and non-uniform solvent rinsing. Despite these limitations, this study represents the first integrated CAL workflow in space, providing an initial experimental demonstration and analysis for closed-loop in-space manufacturing.

Waddell, Taylor [Department of Mechanical Engineer↗
DOE OSTI2024

QRCODE: Massively parallelized real-time time-dependent density functional theory for periodic systems

We present a new software module, QRCODE (Quantum Research for Calculating Optically Driven Excitations), for massively parallelized real-time time-dependent density functional theory (RT-TDDFT) calculations of periodic systems in the open-source Qbox software package. Our approach utilizes a custom implementation of a fast Fourier transformation scheme that significantly reduces inter-node message passing interface (MPI) communication of the major computational kernel and shows impressive scaling up to 16,344 CPU cores. In addition to improving computational performance, QRCODE contains a suite of various time propagators for accurate RT-TDDFT calculations. As benchmark applications of QRCODE, we calculate the current density and optical absorption spectra of hexagonal boron nitride (h-BN) and photo-driven reaction dynamics of the ozone-oxygen reaction. We also calculate the second and higher harmonic generation of monolayer and multi-layer boron nitride structures as examples of large material systems. Our optimized implementation of RT-TDDFT in QRCODE enables large-scale calculations of real-time electron dynamics of chemical and material systems with enhanced computational performance and impressive scaling across several thousand CPU cores.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Adsorption of Non-Ionic Surfactant and Monoclonal Antibody on Siliconized Surface Studied by Neutron Reflectometry

The adsorption of monoclonal antibodies (mAbs) on hydrophobic surfaces is known to cause protein aggregation and degradation. Therefore, surfactants, such as Poloxamer 188, are widely used in therapeutic formulations to stabilize mAbs and protect mAbs from interacting with liquid-solid interfaces. Here, the adsorption of Poloxamer 188, one mAb and their competitive adsorption on a model hydrophobic siliconized surface is investigated with neutron scattering coupled with contrast variation to determine the molecular structure of adsorbed layers for each case. Small angle neutron scattering measurements of the affinity of Poloxamer 188 to this mAb indicate that there is negligible binding at these solution conditions. Neutron reflectometry measurements of the mAb show irreversible adsorption on the siliconized surface, which cannot be washed off with neat buffer. Poloxamer 188 can be adsorbed on the surface already occupied by mAb, which enables partial removal of some adsorbed mAb by washing with buffer. The adsorption of the surfactant introduces significant conformational changes for mAb molecules that remain on the surface. In contrast, if the siliconized surface is first saturated with the surfactant, no adsorption of mAb is observed. Competitive adsorption of mAb and Poloxamer 188 from solution leads to a surface dominantly occupied with surfactant molecules, whereas only a minor amount of mAb absorbs. These findings clearly indicate that Poloxamer 188 can protect against mAb adsorption as well as modify the adsorbed conformation of previously adsorbed mAb.

36 MATERIALS SCIENCE↗