Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Holistic comparison of environmental barrier coating material candidates through design of a figure of merit

The first figure of merit for environmental barrier coating (EBC) materials was designed through a ranking system for material properties pertaining to established EBC failure modes in service. Seven past, present, and novel EBC candidate materials were used in the figure of merit design: SiO 2 , Ba 0.75 Sr 0.25 Al 2 Si 2 O 8 (BSAS), HfSiO 4 , Yb 2 Si 2 O 7 , Yb 2 SiO 5 , Yb 2 O 3 , and YbPO 4 . Utilizing compiled data from the literature, the presented figure of merit verified Yb 2 Si 2 O 7 as the state-of-the-art candidate with optimal EBC properties and inferred that YbPO 4 should be considered as a potentially viable EBC material candidate. Further, the figure of merit allows for a holistic comparison of EBC candidates and informs experimental and computational search efforts for next-generation complex EBCs. Clear knowledge gaps found through this work include CaO–MgO–Al 2 O 3 –SiO 2 (CMAS)-resistant coatings, EBC lifetimes before delamination, and oxidant diffusion rates in relevant EBC microstructures. It was shown that while some materials show promise for solving a single key failure mode for EBCs (i.e., CMAS reactivity), a community-wide goal should be placed on materials development to achieve acceptable resistance against all major failure modes, which are interconnected. Novel compositionally complex EBC materials, in addition to layered EBC architectures, show promise for the optimization of material properties for long-lifetime EBCs in combustion environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Design rules for 316H nuclear components cladded with nickel or tungsten

The existing Class A metallic materials qualified in the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules for high temperature nuclear reactors are not ideally suited for long term molten salt corrosion resistance in high temperature molten salt reactors. Potentially, corrosion or corrosion driven environmentally assisted cracking could limit the design life of structural components in molten salt reactors. A solution to this limitation is the use of cladded components – overlay the Class A material with a thin layer of some non-qualified, corrosion-resistant material. However, this necessitates the development of design methods for cladded components that do not require long-term testing of clad materials in order to support the near-term deployment of molten salt reactors. This report develops such a methodology along with a complete set of rules presented in a format compatible with an ASME nuclear Code Case. These design rules are for 316H Class A components cladded with either nickel or tungsten. The report also discusses the development of a set of general criteria for selecting clad materials beyond the specific 316H/tungsten and 316H/nickel systems and general acceptance tests for checking the mechanical integrity of the clad/base metal interface. Finally, the report includes a set of fully-documented sample problems detailing the application of the rules to high temperature cladded components

36 MATERIALS SCIENCE↗
DOE OSTI2023

Commissioning of new CVD/ALD Furnace at Fermilab

The new CVD/ALD furnace that we are commissioning at Fermilab will allow us to deposit thin films of superconducting materials on RF cavities on different shapes, 1 cell and 9 cells 1.3GHz and 1 cell and 5 cells 650MHz. This furnace is capable to perform two different types of deposition: chemical vapor deposition and atomic layer deposition. Different materials are under investigation to push accelerating superconducting RF cavities to support higher accelerating fields and to operate with lower power loss. The first tests are focusing on the alternative A15 superconductors as: Nb3Ge, Nd3Ga, Nb3Sn, V3Si. The furnace has two different sources of precursors: 1) chlorine furnace, where we can produce the precursors in-situ, so we can build our own precursors and test how the deposited material is affecting the cavity performance, 2) 6 different bubblers, 3 low temperature bubblers and 3 high temperature bubblers. The deposition chamber is a versatile chamber with two independ ent vacuum volumes, to ensure a higher cleanliness of the deposited material. The furnace is designed to have two different configurations: High temperature, up to 1400 C, and low temperature, up to 400 C.

Grassellino, Laura↗
DOE OSTI2022

Anomalous Redox Features Induced by Strong Covalency in Layered NaTi 1-y V y S 2 Cathodes for Na-Ion Batteries

The rising demand for energy density of cathodes means the need to raise the voltage or capacity of cathodes. Transition metal (TM) doping has been employed to enhance the electrochemical properties in multiple aspects. The redox voltage of doped cathodes usually falls in between the voltage of undoped layered cathodes. However, in this study, we found anomalous redox features in NaTi 1-y V y S 2 . The first discharge platform potential (2.4 V) is significantly higher than that of undoped NaTiS 2 and NaVS 2 (both around 2.2 V), and the energy density is raised by 15%. We speculate that the anomalous voltage is mainly attributed to the strong hybridization in the Ti-V-S system. Ti 3+ and V 3+ undergo charge transfer and form a more stable Ti (t 2g 0 e g 0 ) and V (t 2g 3 e g 0 ) electronic configuration. Our results indicate that higher voltage of cathode materials could be achieved by strong TM-ligand covalency, and this conclusion provides possible opportunities to explore high voltage materials for future layered cathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Full Device Evaluation of Metal Halide Perovskite Solar Cells in Low Earth Orbit Aboard the International Space Station

This study investigates how sustained low Earth orbit (LEO) exposure affects metal halide perovskite (MHP) thin films and perovskite solar cells (PSCs). It examines samples deployed on the Materials International Space Station Experiment (MISSE) 15 and 16 missions. Five methylammonium lead iodide (MAPI) thin films are deployed on MISSE-16, each with distinct UV filters to selectively attenuate AM0 spectral bands. While post-flight optical analysis reveals that the least UV-exposed film exhibits the highest emission and lowest non-radiative recombination rate, no clear correlation is observed among the rest, and all MAPI films maintained excellent integrity throughout the mission. MISSE-15 deployed eight PSCs with diverse structures, MHP compositions, and contact materials. Post-flight analysis reveals stable, highly emissive MHPs, but damaged contacts due to ion migration, which caused loss of electrical response. The MISSE missions demonstrate MHPs' suitability for space applications, while highlighting the need for improved interfacial layers and contact materials to enhance charge carrier mobility, prevent ion migration, and improve charge carrier extraction efficiency.

14 SOLAR ENERGY↗
DOE OSTI2021

Stromataxic Stabilization of a Metastable Layered ScFeO3 Polymorph

Metastable polymorphs--materials with the same stoichiometry as the ground state but a different crystal structure--enable many critical technologies. This work describes the development of a stabilization approach for metastable polymorphs that are difficult to achieve through other stabilization techniques (such as epitaxy or quenching) called stromataxy. Stromataxy is a method based on controlling the precursor structure during the initial stages of material growth to dictate phase formation. To illustrate this approach, we controlled the atomic layering of the precursors of ScFeO3 and stabilized the metastable P63cm phase, under conditions that previously led to the ground-state Ia3¯ bixbyite phase. Ab initio mechanistic calculations highlight the importance of the variable oxidation state of Fe and the layer stability during layer-by-layer growth. The broad applicability of a stromataxy approach was demonstrated by stabilizing this metastable phase on substrates that have previously been shown to stabilize other polymorphs under continuous growth. Stromataxy is shown as a viable option for accessing polymorphs that are close in energy, difficult to differentiate by strain, or that lack a well epitaxially matched substrate.

calculations↗
DOE OSTI2024

Unique optical excitations in topological insulators (Final Technical Report)

The overall objective of this research is to understand how light interacts with topological insulator (TI) films and layered structures. Unlike normal materials, the electrons in TI films are trapped at the top and bottom surfaces of the film. These electrons have unusual properties, including low mass and high velocity. Light shining on these trapped electrons will excite electron density waves, called plasmons, which inherit the unusual properties of the electrons. This project aims to understand how these plasmons interact with each other and how the plasmon properties change as the film dimensions change. By controlling the physical properties of the films, the optical response of the film can also be controlled. In addition to single TI films, the project will also investigate the properties of stacks of TI films layered with normal insulating films. Stacking these materials results in multiple layers of trapped electrons whose plasmons can interact in ever more complex ways. After these interactions are understood, we can begin to engineer complex TI structures to obtain designer optical phenomena in the far-infrared and THz, wavelength ranges of interest for environmental monitoring and chemical sensing. This research directly addresses DOE Grand Challenges, including understanding how properties of matter emerge from complex electronic correlations and learning how to control these properties as well as the mission of the Basic Energy Sciences program to understand and control matter at the electronic/atomic level.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomistic Positioning of Defects in Helium Ion Treated Single-Layer MoS 2

Structuring materials with atomic precision is the ultimate goal of nanotechnology and is becoming increasingly relevant as an enabling technology for quantum electronics/spintronics and quantum photonics. Here, we create atomic defects in monolayer MoS 2 by helium ion (He-ion) beam lithography with a spatial fidelity approaching the single-atom limit in all three dimensions. Using low-temperature scanning tunneling microscopy (STM), we confirm the formation of individual point defects in MoS 2 upon He-ion bombardment and show that defects are generated within 9 nm of the incident helium ions. Atom-specific sputtering yields are determined by analyzing the type and occurrence of defects observed in high-resolution STM images and compared with Monte Carlo simulations. Both theory and experiment indicate that the He-ion bombardment predominantly generates sulfur vacancies.

Two-dimensional materials↗
DOE OSTI2020

Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials

Ni-rich layered transition metal oxide (NMC, LiNi1-x-yMxCoyO2, 1 – x – y = 0.6) is promising for high-energy-density lithium-ion batteries, but its large-scale application is still hindered by several technical challenges, including secondary particle cracking, interfacial instability, and cell degassing during cycling. Here, we report a facile wet-chemical method to modify both the surface and the bulk of the LiNi0.76Mn0.14Co0.10O2 (NMC76) cathode with Al doping to effectively improve the structural/interfacial stability of the cathode, and hence its long-term cycling capability. With only 1 mol% Al doping, the Al-NMC76 electrode delivers a good capacity retention of 79.2% after 500 cycles at a high voltage limit of 4.5 V, which is far better than those of undoped NMC76 under the similar condition. The enhanced performance can be attributed to the Al doping in the NMC76, which not only strengthens the bulk structural stability through doping into the lattice, but also suppresses acidic attack from the electrolyte through altered surface structure of NMC76.

Al doping, capacity retention, high voltage, elect↗
DOE OSTI2025

Erratum: Review—Materials Science Predictions of Thermal Runaway in Layered Metal-Oxide Cathodes: A Review of Thermodynamics [ J. Electrochem. Soc. , 167, 090543 (2020)]

It was found that corrections are required for the published article cited in the title of this document. A revised Table VII is shown below, in which the values for S (entropy of the liquid solvents) have been corrected for consistency with the original sources. No corrections were required for the enthalpies, but they are included for completeness. The cited references and table footnotes found in the originally published version of Table VII remain applicable.

Shurtz, Randy C. [Sandia National Laboratories (SN↗
DOE OSTI2024

Building Artificial Layered Solids from the Bottom-up: Materials by Design to Enable New Energy Technologies

This final technical report summarizes the key accomplishments on this DOE Early Career Program award received by PI Guihua Yu at the University of Texas at Austin. The main goal of this ECP award was to develop synthetic methodologies, self-assembly approaches towards structurally controlled nanosheets-like solids from the bottom up, and to understand and characterize their chemical/physical characteristics for the design of future-generation energy devices with novel functions and properties, that will have direct implications for energy science and technologies such as energy storage and conversion, and catalysis. The project accomplished these goals by completing the following objectives: • Rational design, synthesis, and self-assembly of structurally-controlled molecular ‘nanosheets’ materials. Moving beyond conventional van der Waals two-dimensional crystals, this project enables new synthesis and processing strategies to develop ultrathin nanosheets materials, from inorganic transition-metal oxides-based, to hybrid organic-inorganic nanomaterials, with structural factors such as facet, thickness and pore structure being well controlled during synthesis or assembly processes. • Fundamental understanding and electrochemical characterization of these assembled molecular ‘nanosheets’ materials via charge/mass transport studies through electrochemical intercalation of different metal ions for next-generation energy storage, as well as electrocatalytic studies using this new material platform for understanding catalytic reaction kinetics and the roles of surface functionalization and interface interactions owing to atomic thickness, nanoscale porosity, and other structural factors.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chiral Topological Surface States on a Finite Square Photonic Crystal Bounded by Air

Chiral, topologically protected, photonic surface states can be found at the boundary between gyrotropic photonic crystals where a changing magnetic field induces different topology across the interface. Typically, photonic crystals with either a suitable band structure on both sides of the interface to provide a band gap and evanescent decay of the surface states away from the interface, or an outer layer with engineered material properties is required. In this paper, we show the emergence of topological, unidirectional surface states at the termination of finite gyrotropic photonic crystals with a simple square lattice and C 4 rotational symmetry bounded by a vacuum, eliminating the need for an outside layer to enable chiral surface modes. Here, we start from an infinite, time-reversal-symmetry-breaking photonic crystal with a band gap associated with bands with nonzero Chern numbers, different from all-zero Chern numbers in air. We then modify the photonic crystal to move this band gap below the light line, while maintaining the Chern-number discontinuities. Band-structure calculations for a supercell approximating a photonic crystal finite in the direction normal to the surface demonstrate the existence, dispersion, and chirality of the surface mode. Extensive direct scattering calculations for a point source and spatial Fourier analysis further reveal a unidirectional free-space topological surface state, which propagates counterclockwise around the surface of a finite photonic crystal, providing a nearly foolproof way to cross-check the surface-mode band structure unaffected by backscattering from local defects. Additionally, scattering simulations allow an independent characterization of the state dispersion and unveil the robustness of the topological plasmonic mode propagation around the 90° bends of the structure, being due to only radiation leakage. In contrast to buried topological surface states, the observed surface modes at the photonic crystal–air interface have the advantage of being accessible to the outside world, allowing one to take advantage of the defect-tolerant backscattering-free surface modes to engineer emission from photonic crystal surfaces into arbitrary free-space beam shapes and directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Multiplexing core & sheath extrusion system development for additive manufacturing for inner-bead multi-material capability

Single-feed polymer extruders are widely used in large-format additive manufacturing (AM) systems; however, the increasing demand for multi-material functionality within a single part has driven significant innovation in this field. One approach involves robotic pick-and-place operations, while another explores mechanical switching of feed lines during extrusion. Although robotic pick-and-drop systems offer flexibility, they introduce longer layer times during material changes, which can negatively affect the structural integrity of the part. On the other hand, mechanical feed switching causes delays in material transitions, as the existing material must be flushed before the new material emerges from the nozzle. This poses particular challenges for smaller or more intricate parts. In this study we are developing a unique multiplexing extrusion system with core & sheath nozzle that combines two extruders via co-extrusion. This allows for a unique inside and outside inner-bead (i.e., within the same bead) multi-material capability. We believe that this technology will allow for combining neat and filled materials, ductile and stronger materials, and many other combinations to address the problems aforementioned above and disrupt the AM technology creating new opportunities and opening application areas.

Tekinalp, Halil [ORNL]↗
DOE OSTI2023

Stochastic generation of electrolyzer anode catalyst layers

Here, we introduce a stochastic methodology to reproduce the complex pore structure observed in commercial iridium catalyst layers. This method preserves the α pore (pores smaller than 250 nm) and β pore (pores greater than or equal to 250 nm) regions of the catalyst layer. The morphology of the generated materials was validated by comparing the pore size distributions of generated materials against those obtained from commercial materials imaged using x-ray nano computed tomography. We further demonstrate that the pore size distributions of the generated materials are statistically indistinguishable from the imaged catalyst layers, indicating that the stochastic methodology is capable of accurately reproducing catalyst layer morphology. Pore network modelling was conducted on the generated catalyst materials to simulate single-phase permeability, electrical conductivity, and ionic conductivity, and these properties were found to be within experimentally measured ranges for electrolyzer catalyst layers. Additionally, simulations were performed on the generated materials with varying ionomer and iridium catalyst loadings. As the ionomer loading is added, proton conductivity increases exponentially, which demonstrates the importance of optimizing ionomer loading, considering that these effects will be exacerbated in the hydration and temperature conditions of operating electrolyzers. The stochastic material generation method presented in this work is a powerful tool for the development of novel low loading catalyst layers, where the effect of various structural parameters on electrolyzer performance characteristics can be explored.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controllable topological insulator phases in litharge-phase InBi monolayer

Despite recent advances of layered square-net topological material models that possess ideal semimetallic electronic structures and promising potential in material applications, the identification of experimentally accessible two-dimensional square-net materials with related topological properties has proven challenging. Due to the highly tunable physical and topological properties of III-V semiconductors, we revisit the class of III-V materials and observe that the litharge-phase InBi is a layered square-net material and can be exfoliated into the InBi monolayer. We present a comprehensive first-principles study of the energy landscape of the InBi monolayer. We identify a paraelastic phase and three ferroelastic phases and study their topological properties. Specifically, we show that the paraelastic InBi monolayer is a trivial insulator due to the orbital-ordering-induced band inversion occurring between states with the same parity. Substituting one Bi atom per cell with another V-group element (N, P, As) or applying an electric field that breaks the inversion symmetry and changes the orbital onsite energy, the paraelastic InBi monolayer can be driven into the topological insulator phase. Furthermore, one of the ferroelastic phases of pure InBi, which can be obtained by gently straining the paraelastic phase, also possesses such topological insulating properties. Furthermore, these results provide several experimentally accessible routes to tune the nontrivial topology in the InBi monolayer, including creating heterostructures with piezoelectric or ferroelectric substrates and applying mechanical strain, making the InBi monolayer an ideal platform to study the interplay of reduced dimensionality, square-net chemical bonding networks, and band topology.

2-dimensional systems↗
DOE OSTI2020

Mixed-dimensional stackable electronics enabled by freestanding 2D/3D materials

2D material-based devices have received great deal of attention as they can be easily stacked to obtain multifunctionality. With their ultrathin thicknesses, such multifunctioning devices become so flexible and conformal that they can be placed onto any 3D featured surfaces. However, 2D heterostructures are typically demonstrated as stacked flakes where single or few devices can be fabricated due to lack of strategies for layer-by-layer stacking of 2D materials at the wafer scale. In this talk, I will discuss about our unique strategy to isolate wafer-scale 2D materials into monolayers and stack them into a heterostructures by using a layer-resolved splitting (LRS) technique. This technique enables my group at MIT to explore unprecedented wafer-scale 2D heterodevices including integrated photonics, 3D neuromorphic computing, and microLEDs, which will be introduced in my talk. While 2D heterostructures promise interesting futuristic devices, the performance of 2D material-based devices is substantially inferior to that of conventional 3D semiconductor materials. However, 3D materials exist as their bulk form, thus it is challenging to stack them together for heterostructures. Obviously, conformal coating of such single-crystalline bulks on 3D features is impossible. My group at MIT has recently invented a 2D materials-based layer transfer (2DLT) technique that can produce single-crystalline freestanding membranes from any compound materials with their excellent semiconducting performance. This technique is based on remote epitaxy of single-crystalline films on graphene followed by peeling from graphene. Stacking of freestanding 3D material membranes will enable unprecedented 3D heterostructures whose performance is expected to be superior to that of 2D heterostructures. I will talk about our group’s effort to apply single-crystalline freestanding membranes for flexible, conformal electronics as well as for 3D heterostructures. Finally, I will conclude my talk by discussing perspectives of coupling 2D-3D freestanding membranes for 2D-3D mixed heterostructured devices that can be enabled by our LRS and 2DLT techniques.

Kim, Jeehwan↗
DOE OSTI2024

Synthesis pathways to thin films of stable layered nitrides

Controlled synthesis of metastable materials away from equilibrium is of interest in materials chemistry. Thin-film deposition methods with rapid condensation of vapour precursors can readily synthesize metastable phases but often struggle to yield the thermodynamic ground state. Growing thermodynamically stable structures using kinetically limited synthesis methods is important for practical applications in electronics and energy conversion. Here, in this study, we reveal a synthesis pathway to thermodynamically stable, ordered layered ternary nitride materials, and discuss why disordered metastable intermediate phases tend to form. We show that starting from elemental vapour precursors leads to a 3D long-range-disordered MgMoN 2 thin-film metastable intermediate structure, with a layered short-range order that has a low-energy transformation barrier to the layered 2D-like stable structure. This synthesis approach is extended to ScTaN 2 , MgWN 2 and MgTa 2 N 3 , and may lead to the synthesis of other layered nitride thin films with unique semiconducting and quantum properties.

36 MATERIALS SCIENCE↗