Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “knot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Inlet Performance of the NFAC 1/50th-scale 80- by 120- Foot Wind Tunnel

The National Full-Scale Aerodynamics Complex 80- by 120-Foot Wind Tunnel (80x120) was dedicated in 1987 and rated at 100 knots for full-scale aircraft testing at NASA Ames Research Center. The 80x120 is the world’s largest wind tunnel, designed as an open circuit tunnel with a large aerodynamically treated inlet open to the ambient atmospheric air. In 2017, damage was sustained within the wind tunnel drive system, opening a window to do testing using the existing 1/50th-scale model of the 80- by 120-Foot Wind Tunnel within the full-scale 80- by 120-Foot Wind tunnel test section. The objective of the research was to quantify the turbulence levels within the 1/50th-scale test section as a function of onset atmospheric wind direction (± 90 deg from tunnel center-line), variable test section speed (5 – 50 m/s) and purposeful obtrusion of wind flow into the inlet. The model wind tunnel inlet, contraction, and test section are geometrically identical to that of the full-scale wind tunnel and model testing provides aerodynamic performance characteristics under controlled test conditions allowing for insight into the full-scale test section flow quality. The test section turbulence levels are minimally affected by the onset direction of the ambient atmospheric wind, but are dramatically affected by the speed in the tunnel while operated in the presence of winds. Original design specifications were axial/vertical/lateral turbulence ≤ 0.5% at maximum test section speed, though early full scale tunnel testing determined that lateral turbulence would be ≤ 0.6%. For test section speeds ≥ 30 m/s the tunnel is within the design specification limits. Between 5 m/s and 30 m/s, the test section turbulence levels are dependent on the onset wind direction and test section speed where test section turbulence in the axial, vertical and lateral directions was seen to be between 0.5% and 1% and, at times, greater than 1%. Finally, testing was performed with blockage designs at the inlet to disrupt the wind flow quality entering the tunnel contraction zone in an attempt to create higher levels of turbulence for high turbulent test conditions simulating the earth’s boundary layer. The highest turbulence levels measured were 6% in the axial direction by use of large spires designed to obstruct ≈ 50% of the inlet area.

Inlet Performance↗
NASA NTRS1994

Molecular Hydrogen and Excitation in the HH 1-2 System

We present a series of molecular hydrogen images of the Herbig-Haro 1-2 system in the 1-0 S(1) transition at 2.121 microns, with a spatial resolution of ~2 inches. The distribution of H 2 is then compared with that of the excitation, given by the [S II] 6717+6731 to H-alpha line ratio. We find that most optical condensations in the HH 1-2 system, including the VLA 1 jet, have H 2 counterparts. H 2 emission is detected in most low excitation knots, as expected for low velocity shocks (50 km s sup-1 <), but also in high excitation regions, like in HH 1F and HH 2A'.

molecular↗
NASA NTRS2021

Depletion & Recovery of the O3 Layer Observed from Space Over the Past 50 Years of the Anthropocene

This year we are celebrating the 50th anniversary of the launch of the backscatter UV (BUV) instrument on NASA’s Nimbus-4 satellite. Since then 10 more advanced instruments, but based on the same basic measurement principle, have been launched on polar orbiting NASA and NOAA satellites. The datasets produced by these instruments are unique for they have captured the period before the onset of the decline of the ozone layer due to manmade chemicals, the declining period, and the present slow recovery period. This period includes the rapid development of the iconic anthropocene era feature called the “Ozone Hole” . However, stitching together data from 11 separate satellite instruments to create a homogeneous record has presented many challenges. The first two NASA instruments suffered considerable degradation after launch that required the development of novel techniques to characterize their calibration. The next 7 instruments were launched on NOAA’s polar orbiting weather satellites that were not designed for long-term monitoring of climate variables. In particular, they didn’t have the station keeping capabilities needed to maintain a stable equator crossing time. Drifting orbits not only stress the retrieval algorithm and the calibration system of UV instruments but also make the interpretation of data difficult because the upper stratospheric ozone has systematic and complex diurnal variabilities that are comparable to the anthropogenic signal one wants to extract. We will highlight our recent efforts in untangling this knot. Finally, we will discuss the results from the OMPS limb scattering instrument, a recent addition to this constellation, that has been operating on the Suomi NPP satellite since October 2011. It is helping us capture how the ozone layer in the lower stratosphere and troposphere is evolving in response to the climate change and rising chemical pollutants in some parts of the world, while the upper stratosphere slowly recovers due to phaseout of the chemicals that initiated the decline of the ozone layer in the late 70s.

P Bhartia↗
NASA NTRS2021

Evidence of Warm Core Structure Maintenance Over Land: A Case Study Analysis of Cyclone Kelvin

Cyclone Kelvin made landfall in northwest Australia as a category 1 storm on 18 February 2018. After landfall, tropical cyclones typically weaken due to the exhaustion of a moisture supply. Cyclone Kelvin continued to intensify with winds gusting to 100 knots and significant flooding well inland. A distinct eye feature also formed well after landfall. An analysis of meteorological satellite, MERRA2reanalysis, and Global Data Assimilation System (GDAS) data was employedin a case study of Cyclone Kelvin. Using a cyclone phase diagram, it is confirmed that a warm core structure was maintained as Cyclone Kelvin continued to move inland, even through a period of brief inland intensification.

Cyclone Kelvin↗
NASA NTRS2022

Wind Tunnel Performance Tests of a Full-Scale Proprotor on the Tiltrotor Test Rig

The Tiltrotor Test Rig (TTR) is a new, large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The TTR was jointly developed by NASA, the U. S. Army and the U. S. Air Force. The first wind-tunnel entry was completed in November 2018 with a modern, 26-ft diameter proprotor. The primary purpose was to complete the development of the TTR, including systems integration with the NFAC. The TTR and rotor were tested up to 273 knots in axial flow, which is the highest airspeed ever achieved by a full-scale proprotor in any wind tunnel. The entry constitutes the first full-scale wind-tunnel test of a gimballed, coning-flexure rotor. Extensive conversion-mode data were also acquired, and hover/climb conditions were explored. Additional testing included aerodynamic tares, motor tests, thermal tests, modal vibration tests, and other checkout activities. This report summarizes the results of the test, including examples of the most significant data.

Tiltrotor Test Rig↗
NASA NTRS2021

NASA-NOAA Feasibility Report

The western stock of Steller sea lions and the Aleutian stock of harbor seals both experienced dramatic declines in abundance during the past few decades, particularly in the central and western Aleutian Islands. Both stocks have continued to decline in recent years, thus are a high priority for routine monitoring. NOAA’s Marine Mammal laboratory (MML) has conducted aerial surveys of marine mammals throughout coastal Alaska to monitor trends in population abundance and distribution for more than 20 years. These surveys have typically been conducted from a twinengine aircraft, such as a DHC-6 Twin Otter, operated by NOAA pilots and crewmembers. Aerial surveys in the Aleutian Islands present significant challenges and higher risks due to their remoteness, rugged terrain, and extreme weather. To evaluate the feasibility of transitioning from manned to unmanned aerial surveys in this region, thereby reducing risks to NOAA personnel and high-value aircraft, we propose to conduct test survey flights in the Near Islands of Alaska using a medium-sized, fixed-wing UAV (NASA’s SIERRA-B aircraft) with a nadir-aimed imaging payload. Survey flights are planned to be conducted during daylight hours on days with VFR conditions and less than ~20 knot winds at altitudes of 800-1200 feet. Survey imagery, including thermal video and high-resolution color photos, would be collected at known Steller sea lion and harbor seal sites along the coastlines of Shemya, Nizki, Alaid, Agattu, and Attu Islands. The planning team will request approval and support from the US Air Force to conduct this project at Eareckson Air Station (Shemya Island, AK) during the month of September 2022 when weather conditions in the western Aleutian Islands are expected to be optimal.

NOAA↗
NASA NTRS2022

Evidence for a Dense, Inhomogeneous Circumstellar Medium in the Type Ia SNR 0519-69.0

We perform an expansion study of the Balmer dominated outer shock of the SNR0519−69.0 in the LMC by using a combination of newHSTWFC3 imagery obtained in 2020 and archival ACS images from 2010 and 2011. Thanks to the very long time baseline, our proper motion measurements are of unprecedented accuracy. We find a wide range of shock velocities, with the fastest shocks averaging 5280 km s−1and the slowest grouping of shocks averaging just 1670 km s−1. We compare the Hα images from HST with X-ray images from Chandra and mid-IR images from Spitzer, finding a clear anti-correlation between the brightness of the remnant in a particular location and the velocity of the blast wave at that location, supporting the idea that the bright knots of X-ray and IR emission result from an interaction with a dense inhomogeneous circumstellar medium. We find no evidence for X-ray emission, thermal or nonthermal, associated with the fastest shocks, as expected if the fastest velocities are the result of the blast wave encountering the lower density ambient medium of the LMC. We derive an age of the remnant of≤670±70 yr, consistent with results derived from previous investigations.

Brian J Williams↗
NASA NTRS2022

Validation and Interpretation of a Three-dimensional Configuration of a Magnetic Cloud Flux Rope

One strong magnetic cloud (MC)with a magnetic field magnitude reaching∼40 nT at 1 au during 2012 June16–17 is examined in association with a preexisting magnetic flux rope (MFR)identified on the Sun. The MC is characterized by a quasi-three-dimensional(3D) flux rope model based on in situ measurements from the Wind spacecraft. The contents of the magnetic flux and other parameters are quantified. In addition, a correlative study with the corresponding measurements of the same structure crossed by the Venus Express (VEX)spacecraft at a heliocentric distance of 0.7 au and with an angular separation of∼6°in longitude is performed to validate the MC modeling results. The spatial variation between the Wind and VEX magnetic field measurements is attributed to the3D configuration of the structure appearing as a knotted bundle of flux. A comparison of the magnetic flux contents between the MC and the preexisting MFR on the Sun indicates that the 3D reconnection process accompanying anM1.9flare may correspond to the magnetic reconnection between the field lines of the preexisting MFR rooted in the opposite polarity foot points. Such a process reduces the amount of the axial magnetic flux in the erupted flux rope, by approximately 50%, in this case.

Qiang Hu↗
NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper presents the analysis of the supercooled liquid icing data subset from tests conducted in 2022 at the NASA Icing Research Tunnel that studied both supercooled water and ice-crystal icing. The test article that was utilized replicated 3D geometrical features of an inter-compressor duct and strut region of a turbofan engine. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic testing and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location (icing extent), characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost effective way.

supercooled liquid icing↗
NASA NTRSDate not supplied

Icing Physics Studies Using the 3D SIDRM Test Article: Aerodynamic and Supercooled Liquid Icing Analysis

In-flight icing is an important safety issue and is a factor that affects aircraft design and performance. Newer regulations are driving a need for improvements in airframe and engine icing simulation capability. Experimental data is required for development of icing physics models and simulation validation. To that end, this paper discusses analyzed data from icing tests conducted with a 3D test article in 2022 at the NASA Icing Research Tunnel. The test article, whose geometry is representative of an inter-compressor duct and strut region of a turbofan engine, has been designed and constructed to study the physics of supercooled water icing and ice crystal icing. The surfaces of the Simulated Inter-compressor Duct Research Model (SIDRM) can be heated to simulate the warm surfaces of the turbofan inter-compressor duct. The test article is instrumented with pressure taps, heaters, heat flux gauges, and thermocouples, while a 3D laser scanner, cameras, and a scale to measure ice mass were utilized to characterize the icing behavior. The aim of these tests was to generate ice accretions on the SIDRM test article under well-characterized supercooled liquid icing and ice crystal icing conditions. This paper discusses measurements related to aerodynamic tests and supercooled liquid icing tests that were conducted. Aerodynamic measurements were analyzed and compared to computational simulations and were found to be in good agreement for the range of airspeeds (50 to 230 knots) and angles of attack (0 to 4°) tested. Various parametric sweeps were conducted during the supercooled liquid icing portion of the test entry (cloud median volumetric diameter ranged from 15 to 90 µm, total air temperature from -3 to -17 °C, angle of attack from 0 to 4°, and accretion time from 5 to 20 min). These sweeps were performed to measure that parameter’s impact on ice accretion size, location, characteristics (such as glaze/rime ice and shedding behavior), and test article surface temperature. Analysis of the test data showed that clouds composed of larger drops, colder air temperatures, smaller angles of attack, and longer spray times were the primary parameters that resulted in accretions with greater ice mass. Test article angle of attack and cloud droplet size influenced the location of ice accretion as these two parameters directly impact collection efficiency. With respect to icing characteristics, total air temperature dictated icing type, and smaller cloud drop size along with warmer air temperatures resulted in greater amounts of ice shedding. Surface temperature increased during ice accretion from the release of latent (fusion) heat, where total air temperature and cloud drop size impacted the amount of surface temperature change. The icing measurements collected during the SIDRM tests will be used to develop and validate 3D computational engine icing tools, such as GlennICE, that predictively assesses the onset and growth of ice. One of the goals of the sponsoring NASA project is to develop simulation models and tools that can assist in the design and certification of engines for flight in icing conditions in a cost‑effective way.

supercooled liquid icing↗
NASA NTRSDate not supplied

Summary of Results from the Third Aeroelastic Prediction Workshop Flight Test Working Group

This paper summarizes results of the Flight Test Working Group presented at the third Aeroelastic Prediction Workshop held in January 2023. The Flight Test Working Group was looking at the application of flutter prediction tools of a complete aircraft and comparing those predictions to flight-test data. The teams generated a total of six different predictions of the body freedom flutter exhibited by the X-56A experimental aircraft with flexible wings. The computational predictions of frequency and damping are compared with the flight-test data. All of the methods gave similar predictions of the flutter speed, but were all about 10 to 20 knots higher than the measured flutter speed. Additionally, the different generalized aerodynamic forces and the aerodynamic work from the computational tools are compared to illustrate the differences in the methods. Looking at the aerodynamic work done by the flutter mode, suggests that the pitch motion is dissipating less energy and the plunge motion is adding more in the methods which better predict the flutter. However, with only six different predictions it was not possible to develop more definitive conclusions.

Jeffrey Ouellette↗
NASA NTRSDate not supplied

Summary of Results from the Third Aeroelastic Prediction Workshop Flight Test Working Group

This paper summarizes results of the Flight Test Working Group presented at the third Aeroelastic Prediction Workshop held in January 2023. The Flight Test Working Group was looking at the application of flutter prediction tools of a complete aircraft and comparing those predictions to flight-test data. The teams generated a total of six different predictions of the body freedom flutter exhibited by the X-56A experimental aircraft with flexible wings. The computational predictions of frequency and damping are compared with the flight-test data. All of the methods gave similar predictions of the flutter speed, but were all about 10 to 20 knots higher than the measured flutter speed. Additionally, the different generalized aerodynamic forces and the aerodynamic work from the computational tools are compared to illustrate the differences in the methods. Looking at the aerodynamic work done by the flutter mode, suggests that the pitch motion is dissipating less energy and the plunge motion is adding more in the methods which better predict the flutter. However, with only six different predictions it was not possible to develop more definitive conclusions.

Jeffrey Ouellette↗
NASA NTRSDate not supplied

Novel Conceptual Designs for Stopped-Rotor Aerial Vehicles and Other High-Speed Rotorcraft

The objective of this paper is to present some novel vertical lift aircraft design concepts that hold potential for high-speed (greater than or equal to 400 knots) flight but still provide for efficient hover and vertical takeoff and landing capabilities. The pursuit of a high-speed rotorcraft has periodically captured the attention of rotorcraft researchers for decades. In the late 1990’s to early 2000’s, NASA sponsored several high-speed rotorcraft studies. A few recent works have begun to outline novel high-speed rotorcraft concepts that have been largely unexplored so far. This paper discusses four such novel concepts: two stopped-rotor concepts and two non-stopped-rotor concepts.

Stopped-Rotor↗
NASA NTRSDate not supplied

Objectively Identifying Transverse Cirrus Bands in Tropical Cyclones using a Convolutional Neural Network

Transverse cirrus bands (TCBs) are a phenomenon that occurs in many mesoscale and synoptic weather systems, including tropical cyclones. TCBs are defined as "Bands of clouds oriented perpendicular to the flow in which they are embedded" (NOAA) and can be associated with low static stability and high environmental vertical wind shear in the upper levels (Kawashima 2021). TCBs in tropical cyclones are of particular interest due to their apparent occurrence and potential linkage to the tropical cyclone diurnal cycle, stronger tropical cyclones, and rapid intensification, where rapid intensification is an intensification rate of 30 knots or more in 24 hours (NHC).

John Mark Mayhall↗
NASA NTRSDate not supplied

Identification and Computation of Individual Propeller Acoustics of the Joby Aviation Aircraft

The individual propeller sources of the Joby Aviation aircraft are separated using an order tracking filter on measurement data and computed using high- fidelity computational fluid dynamics (CFD) to quantify the relative contributions to the total noise. Computational results are verified against experimental data for hover and steady level flight at 60 knots and demonstrate very good agreement of both overall sound pressure level magnitude and directivity. The propeller source separation for hover shows good agreement between the methods except for the inboard propellers, and it is expected that the assumptions in the CFD model do not accurately capture the flight test condition. Both methods are able to separate the higher tonal levels generated by the tail propellers due to the aerodynamic interaction. Overall, considering the discrepancies between the CFD model and flight test, the agreement in Vold-Kalman-filtered results and prediction yields confidence that the separation method is successful.

eVTOL↗
NASA NTRS2024

Tiltrotor Test Rig Wind-Tunnel Test Data Catalog

The Tiltrotor Test Rig (TTR) is a large-scale proprotor test system for the National Full-Scale Aerodynamics Complex (NFAC). The first wind-tunnel entry was completed in November 2018 with a modern, 26-ft diameter proprotor. The rotor tested was the Bell Model 699, an AW609 rotor modified specifically for wind-tunnel testing. The primary purpose was to complete the development of the TTR, including systems integration with the NFAC. Testing included axial flow up to 273 knots, conversion mode from 30 to 100 deg nacelle angle, and hover/vertical climb conditions. Additional testing included aerodynamic tares, motor tests, thermal tests, modal vibration tests, and other checkout activities. This report lists the test conditions achieved and the types of data acquired and saved in the database.

NFAC↗
NASA NTRSDate not supplied

Flight Test Evaluation of Autonomous Descending-Decelerating Precision Point-in-Space Approach to the Ground

New forms of highly automated Advanced Air Mobility (AAM) aircraft, such as electric vertical take-off and landing (eVTOL) vehicles, could transform transportation, cargo delivery, and a variety of public services. The National Aeronautics and Space Administration (NASA) conducted a series of flight demonstrations in collaboration with the Defense Advanced Research Projects Agency (DARPA) and Sikorsky Aircraft (a Lockheed Martin company) to progressively evaluate autonomous technologies. The autoland flight test research is a first in series for investigating the world’s first procedural descending-decelerating automated landing with vertical guidance Instrument Flight Procedures (IFP). The Sikorsky Optionally Piloted Vehicle (OPV) experimental UH-60 Black Hawk was used to evaluate a flight path’s four-dimensional trajectory (4DT) management into primitive commands and then follow those commands to a Point-in-Space (PinS) landing to the ground. All flight procedures were manually flown to the ground at 12 degrees with a 20-knot tail wind to ensure flight safety before automation was engaged. New and novel high precision approach procedures could pave the way for all future VTOL operations.

David Zahn↗
DOE OSTI2022

Reinforced preform and method for molding

A reinforced preform includes a sheet of reinforced material having opposed first and second edges, with each edge having a respective first connection point located therealong. The preform also includes first and second tethers, with each tether being attached at a respective first end thereof to a respective one of the first connection points and having a respective second end thereof terminating in at least one of: a respective loop tied at the respective second end, a respective knot tied at the respective second end, a respective graspable member to which the respective second end is connected, and an attachment to a respective second connection point located along a perimeter of the sheet. A method and mold for molding a reinforced preform are also disclosed.

36 MATERIALS SCIENCE↗