Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface coupling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Purcell-Enhanced Emissions from Diamond Color Centers in Slow Light Photonic Crystal Waveguides

Diamond color centers are promising candidates for optically addressable quantum memories, which motivates the development of efficient photonic interfaces, often using nanophotonic cavities with narrow spectral line widths and small mode volumes. However, they require perfect spectral and spatial overlap between the cavity mode and quantum emitter, which is challenging. This is especially true for solid-state quantum emitters that are often randomly positioned and suffer from inhomogeneous broadening. Another approach to enhance light-matter interaction across large optical bandwidths and areas is using slow light waveguides. Here, in this study, we demonstrate diamond slow light photonic crystal (PhC) waveguides optically coupled to embedded silicon-vacancy (SiV) color centers. We use the recently developed thin-film diamond approach to fabricate fully suspended two-dimensional PhC waveguides. We demonstrate waveguide modes with high group indices up to 70 and observe Purcell-enhanced emissions of the SiVs. Our approach represents a practical diamond platform for robust spin-photon interfaces with color centers.

2D photonic crystal waveguide↗
DOE OSTI2023

Antiferromagnetic Fe Te 2 1 T - phase formation at the Sb 2 Te 3 / Ni 80 Fe 20 interface

Bilayer topological insulator/ferromagnet (TI/FM) heterostructures are promising for spintronic applications due to their low switching energy and therefore power efficiency. Until recently, the reactivity of TI with FM films was overlooked in the spin orbit-torque literature, even though there are reports that it is energetically favorable for TIs to react with transition metals and form interfacial layers. Here, in this study we fabricated a TI/FM heterostructure comprised of molecular beam epitaxy grown Sb 2 Te 3 and DC sputtered Ni 80 Fe 20 . Broadband ferromagnetic resonance revealed spin-pumping evident by the significant enhancement in Gilbert damping, which is likely a signature of the topological surface states or the presence of large spin-orbit-coupling in the adjacent Sb 2 Te 3 . With low-temperature magnetometry, an exchange bias is observed which indicates an exchange interaction between an antiferromagnet (AFM) and an adjacent FM. Cross-section high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) characterization of the Sb 2 Te 3 - Ni 80 Fe 20 bilayer revealed a complex interface showing diffusion of Fe and Ni into the Sb 2 Te 3 film yielding the formation of a FeTe 2 1T-type structural phase. Furthermore, density functional theory calculations revealed that the FeTe 2 1T-phase has an AFM ground state. Due to experimental limitations in the electron energy loss spectroscopy measurements precise chemistry of the interfacial phase could not be determined, therefore it is possible that the FeTe 2 1T and/or an intermixed (Fe 1-x Ni x )Te 2 1T is the AFM interfacial phase contributing to exchange bias in the system. This work emphasizes the chemical complexity of TI/FM interfaces that host novel, metastable magnetic topological phases and require more in-depth studies of other similar interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging - Software and Data

Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging. This project will perform foundational research and testing to accelerate the sector-wide development and deployment of marine energy converters to provide Power-At-Sea. Specifically, we seek to overcome known challenges and knowledge gaps for the successful co-design of coupled Wave Energy Converter (WEC)-Autonomous Underwater Vehicles (AUV) systems; systems designed and tested for WEC array system health and environmental monitoring applications. This project brings together an experienced, multi-institution, and multi-disciplinary team to focus on the co-design of marine energy (ME) technologies and AUV docking systems, including multi-body hydrodynamic modeling, active control, autonomy, and hardware interfaces necessary to enable new WEC-focused understanding, and allow for robust and ubiquitous AUV docking and recharging in real-world conditions.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

Unveiling in-gap states and Majorana zero modes in superconductor-topological insulator bilayer model

Interfaces between topological insulators and superconductors (SCs) are promising platforms for realizing Majorana zero modes (MZMs) via the superconducting proximity effect. We introduce a bilayer model consisting of the surface states of a three-dimensional topological insulator (3DTI) coupled to an 𝑠-wave superconductor and systematically study the role of interlayer tunneling strength (𝑡⊥) motivated by the recent growth of the Fe⁡(Te,Se)/Bi 2 ⁢Te 3 heterostructure. We find that increasing 𝑡⊥ shifts the proximity-induced (PrI) gap minimum away from the Γ point, giving rise to momentum-selective interference patterns that manifest as spatial oscillations in the in-gap states. We introduce an antidot with a magnetic vortex in the model and investigate the resulting in-gap states, including MZMs and Caroli–de Gennes–Matricon (CdGM) modes. With increasing hybridization strength, the energy separation between MZMs and CdGM states increases, enhancing the isolation of MZMs. Importantly, in the strong hybridization limit, the leading CdGM separation remains large in spite of the decrease in the PrI gap. Spin- and spatially resolved wavefunction analysis reveals angular momentum asymmetries absent in conventional 𝑠-wave systems. A direct comparison with a standalone 𝑠-wave superconductor confirms the emergence of distinct 𝑝-wave-like features in the bilayer geometry. Our results provide experimentally relevant predictions for tuning the stability of MZMs and their differentiation from the CdGM modes in SC-3DTI heterostructures and offer a theoretical framework for probing unconventional superconductivity in engineered topological systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

River–aquifer interactions enhancing evapotranspiration in a semiarid riparian zone: A modelling study

The hydrologic flows across the river–aquifer interface play an important role in groundwater dynamics and biogeochemical reactions within the subsurface; however, little is known about the effects of river–aquifer interactions on land surface processes. In this study, we developed a fully coupled three-dimensional (3D) land surface and subsurface model at a high resolution (~1 km) that accounts for high-frequency hydrologic exchange flow conditions to investigate how river–aquifer interactions modulate surface water budgets in the Upper Columbia-Priest Rapids watershed, a typical semiarid watershed located in the northwestern United States where river stage fluctuates in response to reservoir releases changing. Our results show that the spatiotemporal dynamics of river–aquifer interactions are highly heterogeneous, driven mainly by river-stage fluctuations. Adding 6.64 × 10 6 m 3 year –1 of water over the watershed from the river to groundwater owing to the lateral flow, river–aquifer interactions led to an increase in soil evaporation and transpiration supplied by higher soil moisture content, particularly in deeper subsurface. In a hypothetic future scenarios where a 5-m rise in river stage was assumed, the hydrologic flow exchange rates were intensified, resulting in higher surface water over the entire watershed. Overall, lateral flow induced by river–aquifer exchanges leads to an increase in evapotranspiration of ~75% in the historical period and of ~83% in the hypothetical future scenario. Finally, our study demonstrates the potential of coupled model as an effective tool for understanding river–aquifer–land surface interactions, and indicates that river–aquifer interactions fundamentally alter the water balance of the riparian zone for the semiarid watershed and will likely become more frequent and intense in the future under the effects of climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Curvature Memory in Electrically Stimulated Lipid Membranes

Here, we demonstrate, using non-equilibrium molecular dynamics simulations, that lipid membrane capacitance varies with surface charge accumulation linked to membrane shape and curvature changes. Specifically, we show that lipid membranes exhibit a hysteretic response when exposed to oscillatory electric fields. The electromechanical coupling in these membranes leads to hysteretic buckling, in which the membrane can spontaneously buckle in one of two distinct directions along the electric field, even for the same ionic charge accumulation at the water–membrane interface. In this regard, these binary buckled membrane states suggest potential applications in neuromorphic computing. Their bistable nature, characterized by two distinct and stable configurations, could serve as a foundation for implementing memory storage systems and logic operations. Furthermore, we introduce a circuit model that captures these dynamic effects, offering insights into emergent memory effects in electrically stimulated lipid membranes. Finally, this work presents lipid bilayers as dynamic, adaptable elements and suggests a new platform for exploring energy storage, information processing, and memory encoding at the lipid membrane level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Uptake of N 2 O 5 by aqueous aerosol unveiled using chemically accurate many-body potentials

The reactive uptake of N 2 O 5 to aqueous aerosol is a major loss channel for nitrogen oxides in the troposphere. Despite its importance, a quantitative picture of the uptake mechanism is missing. Here we use molecular dynamics simulations with a data-driven many-body model of coupled-cluster accuracy to quantify thermodynamics and kinetics of solvation and adsorption of N 2 O 5 in water. The free energy profile highlights that N 2 O 5 is selectively adsorbed to the liquid–vapor interface and weakly solvated. Accommodation into bulk water occurs slowly, competing with evaporation upon adsorption from gas phase. Leveraging the quantitative accuracy of the model, we parameterize and solve a reaction–diffusion equation to determine hydrolysis rates consistent with experimental observations. We find a short reaction–diffusion length, indicating that the uptake is dominated by interfacial features. The parameters deduced here, including solubility, accommodation coefficient, and hydrolysis rate, afford a foundation for which to consider the reactive loss of N 2 O 5 in more complex solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

All-silicon quantum light source by embedding an atomic emissive center in a nanophotonic cavity

Silicon is the most scalable optoelectronic material but has suffered from its inability to generate directly and efficiently classical or quantum light on-chip. Scaling and integration are the most fundamental challenges facing quantum science and technology. We report an all-silicon quantum light source based on a single atomic emissive center embedded in a silicon-based nanophotonic cavity. We observe a more than 30-fold enhancement of luminescence, a near-unity atom-cavity coupling efficiency, and an 8-fold acceleration of the emission from the all-silicon quantum emissive center. Our work opens immediate avenues for large-scale integrated cavity quantum electrodynamics and quantum light-matter interfaces with applications in quantum communication and networking, sensing, imaging, and computing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of self-magnetic pinch (SMP) radiographic diode performance on RITS-6 at Sandia National Laboratories. I. Diode dynamics, DC heating to extend radiation pulse

Radiographic diodes focus on an intense electron beam to a small spot size to minimize the source area of energetic photons for radiographic interrogation. The self-magnetic pinch (SMP) diode has been developed as such a source and operated as a load for the six-cavity radiographic integrated test stand (RITS-6) inductive voltage adder driver. While experiments support the generally accepted conclusion that a 1:1 aspect diode (cathode diameter equals anode–cathode gap) delivers optimum SMP performance, such experiments also show that reducing the cathode diameter, while reducing spot size, also results in reduced radiation dose, by as much as 50%, and degraded shot reproducibility. Analysis of the effective electron impingement angle on the anode converter with time made possible by a newly developed dose-rate array diagnostic indicates that fast-developing oscillations of the angle are correlated with early termination of the radiation pulse on many of the smaller-diameter SMP shots. This behavior as a function of relative cathode size persists through experiments with output voltages and currents up to 11.5 MV and 225 kA, respectively, and with spot sizes below approximately few millimeters. Since simulations to date have not predicted such oscillatory behavior, considerable discussion of the angle behavior of SMP shots is made to lend credence to the inference. We report there is clear anecdotal evidence that DC heating of the SMP diode region leads to stabilization of this oscillatory behavior. This is the first of two papers on the performance of the SMP diode on the RITS-6 accelerator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Simple coplanar waveguide resonator mask targeting metal-substrate interface

This white paper presents a single-layer mask, found at https://github.com/Boulder-Cryogenic-Quantum-Testbed/simple-resonator-mask. It is designed for fabrication of superconducting microwave resonators towards 1:1 comparisons of dielectric losses from the metal-substrate interface. Finite-element electromagnetic simulations are used to determine participation ratios of the four major regions of the on-chip devices, as well as to confirm lack of crosstalk between neighboring devices and demonstrate coupling tunability over three orders of magnitude. This mask is intended as an open-source community resource for facilitating precise and accurate comparisons of materials in the single-photon, millikelvin regime.

Kopas, Cameron J.↗
DOE OSTI2024

Antiferromagnetic V 2 ⁢O 3 based exchange coupling

Vanadium sesquioxide (V 2 ⁢O 3 ) is a strongly correlated electronic material that famously undergoes a triple coupled first-order transition where it transitions from a paramagnetic metal with a rhombohedral structure at high temperature to an antiferromagnetic insulator with a monoclinic structure. While several studies have used one of both electronic and structural transitions to control the properties of a heterostructure, evidence of magnetic coupling has notoriously yet to be found. In this paper, we report on a robust magnetic coupling between the antiferromagnetic (AFM) V 2 ⁢O 3 and ferromagnetic (FM) Permalloy (Py) layers that results in a significant exchange bias and strain-induced coercivity enhancement. We provide a temperature and angle-dependent study of magnetic properties, which clearly indicates exchange bias at the AFM/FM interface that appears at the onset of the metal-insulator transition. The magnitude of the exchange bias is strongest when the field is applied along the [001] V 2 ⁢O 3 crystallographic orientation which corresponds to an AFM spin configuration on the [110] surface. Here, this opens the door to designing and implementing novel functionalities in transition metal oxide-based computing using the connection between magnetism and the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

New Insights into the Charge-Transfer-to-Solvent Spectrum of Aqueous Iodide: Surface versus Bulk

Liquid phase charge-transfer-to-solvent (CTTS) transitions are important, as they serve as photochemical routes to solvated electrons. Here in this work, broadband deep-ultraviolet electronic sum frequency generation (DUV-ESFG) and two-photon absorption (2PA) spectroscopic techniques were used to assign and compare the nature of the aqueous iodide CTTS excitations at the air/water interface and in bulk solution. In the one-photon absorption (1PA) spectrum, excitation to the 6s Rydberg-like orbital (5p → 6s) gives rise to a pair of spin–orbit split iodine states, 2 P 3/2 and 2 P 1/2 . In the 2PA spectra, the lower-energy 2 P 3/2 peak is absent and the observed 2PA peak, which is ~0.14 eV blue-shifted relative to the upper 2 P 1/2 CTTS peak seen in 1PA, arises from 5p → 6p electronic promotion. The band observed in the ESFG spectrum is attributed to mixing of excited states involving 5p → 6p and 5p → 6s promotions caused by both vibronic coupling and the external electric field generated by asymmetric interfacial solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

An interface-aware sub-scale dynamics multi-material cell model for solids with void closure and opening at all speeds

Here, we present a multi-material cell model (closure model) for demanding arbitrary Lagrangian-Eulerian (ALE) simulations of fluids and solids. It is based on the interface-aware sub-scale dynamics (IASSD) approach which utilizes the exact material interface geometry within the computational cell to calculate internal material interactions. Our formulation of the closure model also aims to improve the accuracy in low-speed impact events. Voids are used to represent ambient vacuum and internal free boundaries of the distinct materials. Void regions can close and open at contact surfaces, allowing a transition from contact physics to free motion in vacuum. The coupling of void closure and opening with a new formulation of the IASSD model for solids is tested on several one- and two-dimensional numerical examples, ranging from gas expansion in vacuum to planar and round object impacts at various speeds.

42 ENGINEERING↗
DOE OSTI2024

Grand canonically optimized grain boundary phases in hexagonal close-packed titanium

Grain boundaries (GBs) profoundly influence the properties and performance of materials, emphasizing the importance of understanding the GB structure and phase behavior. As recent computational studies have demonstrated the existence of multiple GB phases associated with varying the atomic density at the interface, we introduce a validated, open-source GRand canonical Interface Predictor (GRIP) tool that automates high-throughput, grand canonical optimization of GB structures. While previous studies of GB phases have almost exclusively focused on cubic systems, we demonstrate the utility of GRIP in an application to hexagonal close-packed titanium. We perform a systematic high-throughput exploration of tilt GBs in titanium and discover previously unreported structures and phase transitions. In low-angle boundaries, we demonstrate a coupling between point defect absorption and the change in the GB dislocation network topology due to GB phase transformations, which has important implications for the accommodation of radiation-induced defects.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Coupled Roles of Surface Chemistry and Hydrogen-Assisted Cycling in Ruthenium Atomic Layer Deposition on Silicon Oxides

Ruthenium (Ru) is a promising interconnect material for advanced semiconductor technologies due to its favorable scaling characteristics, including a short electron mean free path and strong electromigration resistance. In semiconductor integration, silicon oxide-based dielectrics serve as dominant insulating materials and constitute ubiquitous interfaces for metallization; however, their formation-dependent surface chemistry and its impact on Ru growth remain insufficiently explored. Here, we investigate Ru ALD on native oxide SiO x (N-SiO x ) and thermally grown SiO 2 (T-SiO 2 ) as model substrates using bis(ethylcyclopentadienyl)ruthenium(II) [Ru(EtCp) 2 ] under two distinct reactant-sequence environments: AB-type (Ru(EtCp) 2 /O 2 ) and hydrogenassisted ABC-type (Ru(EtCp) 2 /O 2 /H 2 ). Under the AB-type process, both N-SiO x and T-SiO 2 exhibit pronounced nucleation delay. N-SiO x shows earlier nucleation and higher nucleation density than T-SiO 2 , plausibly attributed to differences in surface hydroxyl populations. Similar temperature-dependent phase evolution is observed on both substrates, with mixed Ru and RuO 2 phases at 250 °C and predominantly metallic Ru at 300 °C accompanied by increased morphological roughening. In contrast, incorporating an H 2 subpulse (ABC-type) mitigates nucleation delay, particularly on hydroxyl-deficient T-SiO 2 , thereby reducing the substratedependent disparity observed under AB cycling. Moreover, RuO 2 formation is suppressed even at 250 °C on both substrates, shifting growth toward more metallic Ru with reduced resistivity (∼20 μΩ·cm at ∼ 20 nm on N-SiO x ). These trends suggest that H 2 influences the surface reaction pathway, contributing to enhanced metallic stabilization and altered early stage growth kinetics. Overall, this work clarifies the coupled roles of substrate chemistry and reactant-sequence design in governing Ru nucleation and early stage film evolution, providing insight relevant to next-generation interconnect integration and future area-selective deposition strategies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Magnetic Response of Excitons and Excitonic Complexes in Defective Hexyl Ammonium Lead Iodide Self-Assembled Quantum Wells

Correlating the magnetic behavior of low-dimensional semiconductors with the chemistry used to form these excitonic materials remains crucial to the development of devices applied to quantum technologies. In this study, we apply large magnetic fields during the collection of low-temperature photoluminescence (PL) to assess the magnetic properties of excitons in hexyl ammonium lead iodide (HA 2 PbI 4 ) self-assembled quantum wells (SAQWs) formed at liquid−liquid interfaces. The effect of incident laser power and temperature was used to assign lower energy features in these samples’ PL spectra to both excitons trapped at defect sites and trions. Measured peaks shifts allow us to estimate coupling between the applied magnetic fields and the charged defect excitons. Our conclusions are supported by density functional theory calculations on supercells of the proposed defective HA 2 PbI 4 SAQW structure. Additionally, we find an anomalous magnetic response from trion states that resembles the behavior of interacting excitonic complexes in similar, quantum-confined materials at low temperatures. These results highlight the crucial role that chemical conditions can play in the magnetic response of 2D semiconductors applied in quantum technologies.

defect chemistry↗
DOE OSTI2023

A new approach for simulating inhomogeneous chemical kinetics

Abstract In this paper, inhomogeneous chemical kinetics are simulated by describing the concentrations of interacting chemical species by a linear expansion of basis functions in such a manner that the coupled reaction and diffusion processes are propagated through time efficiently by tailor-made numerical methods. The approach is illustrated through modelling $$\alpha$$ α - and $$\gamma$$ γ -radiolysis in thin layers of water and at their solid interfaces from the start of the chemical phase until equilibrium was established. The method’s efficiency is such that hundreds of such systems can be modelled in a few hours using a single core of a typical laptop, allowing the investigation of the effects of the underlying parameter space. Illustrative calculations showing the effects of changing dose-rate and water-layer thickness are presented. Other simulations are presented which show the approach’s capability to solve problems with spherical symmetry (an approximation to an isolated radiolytic spur), where the hollowing out of an initial Gaussian distribution is observed, in line with previous calculations. These illustrative simulations show the generality and the computational efficiency of this approach to solving reaction-diffusion problems. Furthermore, these example simulations illustrate the method’s suitability for simulating solid-fluid interfaces, which have received a lot of experimental attention in contrast to the lack of computational studies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Multifidelity validation of digital surrogates using variable-density turbulent mixing models

In this study, ensembles of experimental data are presented and utilized to compare and validate two models used in the simulation of variable-density (Atwood = 0.22), compressible turbulent mixing. Though models of this kind (Reynolds averaged NavierStokes and large-eddy simulations) have been validated extensively with more canonical flows in previous studies, here the present approach offers novelty in the complexity of the geometry, the ensemble-based validation, and the uniformity of the computational framework on which the models are tested. Moreover, all experimental and computational tasks were completed by the authors which has led to a tightly coupled experimental configuration with its “digital twin.” The experimental divergent-shock-tube facility and its data acquisition methods are described and replicated in simulation space. A 2D Euler model which neglects the turbulent mixing at the interface is optimized to experimental data using a Gaussian process. This model then serves as the basis for both the 2D RANS and 3D LES studies that make comparisons to the mixing-layer data from the experiment. A relatively simple RANS model is shown to produce good agreement with experimental data only at late flow development times. The LES ensembles generally show good agreement with experimental data but display sensitivity to the characterization of initial conditions. Resolution-dependent behavior is also observed for certain higher-order statistics of interest. Overall, the LES model successfully captures the effects of divergent geometry, compressibility, and combined nonlinear instabilities inherent to the problem. The successful prediction of mixing width and its growth rate highlight the existence of three distinct regimes in the development of the instability, each with similarities to previously studied instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗