Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geologic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Geologic-magnetic correlations on the moon - Apollo subsatellite results

Comparison of the magnetic-field measurements of the Apollo subsatellite magnetometers with USGS geologic maps suggests that the ancient lunar field may have been greater during the Imbrian Period than the earlier Pre-Nectarian and Nectarian periods. Further, the field seems to have varied in direction. These data are consistent with a model in which the ancient lunar magnetizing field arises from a core dynamo which does not form until the Imbrian Period. Impacts during this period then result in magnetized crater melt and ejecta blankets. It is emphasized, however, that the area sampled by the subsatellite magnetometers is but a small fraction of the lunar surface. These results must be confirmed with studies of independent regions of the lunar surface before they can be considered conclusive.

Russell, C. T.↗

Geology of the Imbrium Basin Apennine Mountains and relation to the Apollo 15 landing site

Detailed mapping of the Imbrium Basin Apennine Mountains has emphasized several important factors in the geologic evolution of this region. Pre-Imbrian topography was composed of two types of landforms: (1) the nearby Serenitatis, South Imbrium, Aestuum, and Vaporum basins which produced widely spaced regional lows and a sequence of basin deposits; (2) pre-Imbrian craters that reworked existing basin deposits and produced local topographic lows. The sequence of events during the Imbrium impact can be summarized as follows: intensive structural uplift along the Apennine Front occurred prior to the emplacement of ballistic ejecta. Ejecta became more discontinuous toward the backslope and produced radial texture by sedimentary erosional and depositional processes. Post-ejecta-emplacement downfaulting exposed pre-Imbrian deposits along the front and caused severe seismic disturbances that reworked many of the previous units and accentuated pre-basin structures. Tectonic mapping and orbital geophysical data support the idea that little structural modification has occurred in the Apennines since their formation 3.9 b.y. ago.

Spudis, P.↗

Geology of the Luna 24 landing site

The Soviet spacecraft Luna 24 landed at the southeast edge of Mare Crisium on the moon on August 18, 1976. A 160 cm core with a diameter of 8 mm was drilled, extracted, and returned to earth by the spacecraft. A description is presented of the geologic setting at the Luna 24 landing site to provide background information for the study of Luna 24 samples. Interpretations of spectral reflectance data suggest that the Luna 24 landing area is similar in TiO2 content to Oceanus Procellarum. Mare Crisium fills the interior of a circular multiringed impact structure in the eastern hemisphere of the moon. Stratigraphic units within Mare Crisium consist of mare materials and postmare deposits. Aspects of local stratigraphy are discussed, taking into account ray material and mare material. In the vicinity of the Luna 24 landing site, the terrain may be divided into four areas on the basis of topography.

Butler, P., Jr.↗

Impact cratering phenomenon for the Ries multiring structure based on constraints of geological, geophysical, and petrological studies and the nature of the impacting body

In the present paper, an attempt is made to delineate, on the basis of field and laboratory data, the phenomenon of formation of the Ries multiring basin - the best preserved very large terrestrial impact structure. The model proposed conforms to constraints imposed by geological, geophysical, and petrological studies and by the nature of the postulated impacting body. It is also based on the impact features of a stony meteorite measuring 3 km in diameter at an impact velocity of 15 km/sec. The schematic reconstruction shows that critical to the production of a shallow crater is shallow impact penetration (shallow depth of burst). This and the nonballistic ejection of excavated material appear to be genetically related, i.e., if extensive nonballistic transport is recognized, then the associated crater must be a shallow structure and vice versa. This also means the shallow configuration of a crater may not have anything to do with postcratering readjustment.

Chao, E. C. T.↗

Geology of the Taurus-Littrow valley floor

The paper surveys the geology of the Taurus-Littrow valley which is located in a graben that is radial to Mare Serenitatis. The basalt fill is characterized; basalt extrusion in the valley continued until about 3.7 b.y. ago and was quickly followed by deposition of glass beads that formed a mantling unit of probable pyroclastic origin. The glass-bead unit in combination with the overlying regolith forms an unconsolidated surficial deposit with an average thickness of about 14 m. The components of the regolith are described. It is thought that most of the craters are part of a secondary cluster formed by projectiles from Tycho. Age estimates for the central cluster and the light mantle are presented.

Wolfe, E. W.↗

Remote-sensing applications to geology

Results of two day workshop on applications of remote sensing to geology are summarized in report. Topics discussed are environmental analysis, crop classification, plant epidemics and diseases, irrigation reform, and soil surveys.

Source record↗

HCMM: Soil moisture in relation to geologic structure and lithology, northern California

The author has identified the following significant results. First-look qualitative geologic evaluation of day- and night-IR images discloses several en echelon linear features extending throughout the central part of the northern coast range in California, across the Mendocino triple junction and into southern Oregon. Preliminary examination of these features with respect to topographic expression, vegetation, sun angle and azimuth, and atmospheric conditions suggests that they may be related to the intracontinental plate boundary (Lake Mountain Fault zone of Herd) of the Humbolt Plate. The linear features, which cut across several climatic zones and differently vegetated regions are not confined to topographic valleys, but cross the ridges and valleys at varying angles. Lithology within the Great Valley Sequence can be detected on a few of the images; however, preliminary evaluation suggests that the thermal banding observed may be a function of sun azimuth or late-day sun angle. Soil moisture, related to lithologic composition cannot be ruled out at this time.

Rich, E. I.↗

Application of remote sensing to reconnaissance geologic mapping and mineral exploration

A method of mapping geology at a reconnaissance scale and locating zones of possible hydrothermal alteration has been developed. This method is based on principal component analysis of Landsat digital data and is applied to the desert area of the Chagai Hills, Baluchistan, Pakistan. A method for airborne spectrometric detection of geobotanical anomalies associated with prophyry Cu-Mo mineralization at Heddleston, Montana has also been developed. This method is based on discriminants in the 0.67 micron and 0.79 micron region of the spectrum.

Birnie, R. W.↗

Regional stratigraphy and geologic history of Mare Crisium

Remote sensing and Luna 24 sample data are used to develop a summary of the regional stratigraphy and geologic history of Mare Crisium. Laboratory spectra of Luna 24 samples, telescopic reflectance spectra in the 0.3 to 1.1 micron range and orbital X-ray data have identified three major basalt groups in the region. Group I soil is derived from iron- and magnesium-rich titaniferous basalts and was apparently emplaced over the majority of the basin, however is presently exposed as a shelf in the southwest part. Group II soils, derived from very low titanium ferrobasalts, were emplaced in two stages subsequent to Group I emplacement and now appear as part of the outer shelf and topographic annulus. Subsidence of the basin interior preceded and continued after the emplacement of the third basalt group, a soil derived from a low titanium ferrobasalt. The Luna 24 site is found to be within a patch of Group II material.

Head, J. W., III↗

Tharsis Province of Mars - Geologic sequence, geometry, and a deformation mechanism

Tharsis development apparently involved two stages: (1) an initial rapid topographic rise accompanied by the development of a vast radial fault system and (2) an extremely long-lived volcanic stage apparently continuing to the geological present. A deformation model is proposed in which a first-order mantle convection cell caused early subcrustal erosion and foundering of the low third of the planet. Underplating and deep intrusion by the eroded materials beneath Tharsis caused isostatic doming. Minor radial gravity motions of surficial layers off the dome produced the radial fault system. The hot underplate eventually affected the surface to cause the very long-lived volcanic second stage.

Wise, D. U.↗

Lunar KREEP volcanism - Geologic evidence for history and mode of emplacement

The history of KREEP basalt emplacement in the Fra Mauro and Imbrium basin regions was investigated on the basis of the petrologic and geochemical characteristics of Apollo 14 and 15 samples and data from photogeologic, site geology and remote sensing studies. Results suggest that KREEP emplacement began after the excavation of the South Imbrium basin more than 4.0 to 4.1 billion years ago, continued into early to mid-Imbrium, and was in part sychronous with mare volcanism. Surface KREEP activity appears to be concentrated in a triangular area bounded by the Apollo 15 site, southern Procellarum and the Aristarchus region. Most of the Apollo 15 igneous KREEP basalts are products of post-Imbrium KREEP volcanism within the Imbrium basis, whereas the Apollo 14 KREEP-rich breccias represent extensively reworked KREEP volcanics extruded prior to about 4.0 to 4.1 billion years ago.

Hawke, B. R.↗

Geologic interpretation from composited radar and Landsat imagery

Dual polarization L-band (lambda = 25 cm) radar imagery and Landsat multispectral scanner (MSS) data from central Death Valley have been computer processed and combined digitally in order to utilize the complementary information contained in multisensor data sets. Physically, like-polarized radar data gives roughness information on a scale proportional to radar wavelength. Cross-polarized data adds information on the overall roughness, particle shape, and packing density. Visible and near IR reflectivities pertain to surface chemistry. Surficial geologic units in Death Valley are defined on the basis of compositional and textural differences: optical and microwave scattering properties encoded in the multisensor image are sufficient to discriminate most of the units. This synergistic effect is most pronounced for the alluvial fans. Using radar scattering data and measured sun angle, passively-sensed (passive microwave, visible, near IR) images can be corrected for shadowing effects.

Daily, M. I.↗

Borehole geological assessment

A method and apparatus are discussed for performing geological assessments of a formation located along a borehole, and a boring tool that bores a pair of holes into the walls of the borehole and into the surrounding strata along with a pair of probes which are installed in the holes. One of the probes applies an input such as a current or pressured fluid, and the other probe senses a corresponding input which it receives from the strata.

Spuck, W. H., III↗

Processing of multispectral thermal IR data for geologic applications

Multispectral thermal IR data were acquired with a 24-channel scanner flown in an aircraft over the E. Tintic Utah mining district. These digital image data required extensive computer processing in order to put the information into a format useful for a geologic photointerpreter. Simple enhancement procedures were not sufficient to reveal the total information content because the data were highly correlated in all channels. The data were shown to be dominated by temperature variations across the scene, while the much more subtle spectral variations between the different rock types were of interest. The image processing techniques employed to analyze these data are described.

Kahle, A. B.↗

HCMM and LANDSAT imagery for geological mapping in northwest Queensland

The author has identified the following significant results. Photographic prints made from negatives of day-visible and day-IR cover of selected areas were compared with enhanced color composites generated from LANDSAT computer compatible tapes and films. For geological mapping purposes, HCMM imagery is of limited value. While large scale features like the Mikadoodi anticlinorium, contrasting lithological units, and major structures may be distinguished on day-visible and day-IR cover, the spectral bands are too broad and the resolution too coarse even for regional mapping purposes. The imagery appears to be most useful for drainage studies. Where drainage is seasonal, sequential imagery permits monitoring of broad scale water movement while the day-IR imagery yields valuable information on former channels. In plains areas subject to periodic change of stream courses, comparable IR cover at a larger scale would offer considerable potential for reconstruction of former drainage patterns essential for the correct interpretation of geochemical data relative to mineral exploration.

Cole, M. M.↗

Advances in planetary geology

Research reports concerning the planetary geology of Mars are presented. Topics covered include the geomorphology of Martian valleys and various aspects of Martian volcanology.

Woronow, A.↗