Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “forms services forms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

NASA’s and ESA’s Tracking Networks, A Decade of Strategic Partnership for Solar System Exploration

Planetary missions travel vast distances in the Solar System for valuable scientific exploration. Spacecraft return data to Earth via radio links that suffer power losses inversely proportional to the square of the distance, which forms a tremendous engineering challenge compounded by relatively low onboard transmitter power, typically 20 Watts at X-band (~8 GHz). Deep space missions are enabled only because leading space agencies invested in developing very large communications antennas as well as provided a sophisticated suite of tracking, telemetry and command standard services. NASA’s Deep Space Network and ESA’s ESTRACK network are distributed geographically to provide global coverage and utilize stations ranging in size from 34 meters to 70 meters in diameter. Over time, the expanding number of missions, increased requirements for redundancy during critical events as well as the drive for improved navigation accuracy via long-baseline interferometric techniques, increased the networks’ loading and strongly motivated collaboration between the two agencies. Ten years ago, NASA and ESA established a cross-support agreement in addition to multiple on-going mission-specific agreements to meet this need. This strategic partnership was enabled by the development of international inter-operability technical standards and compatible spectrum usage. Over recent years, many critical events were supported via these agreements and some scientific breakthroughs were enabled. A multi-nation tracking contention period envisioned in the near future will also benefit from this partnership. Due to its success over the last decade, the DSN-ESTRACK partnership is serving as a model for other agencies with deep space communication facilities and similar interest. This paper reviews the benefits and lessons learned from collaborative deep space exploration, especially via communications networks, and discusses the potential implementation of similar NASA agreements with other space agencies.

Costrell, Jim↗

Coupled CFD-DEM Analysis of Molten Salt-Cooled Pebble-Bed Reactor Experiment

The development of new nuclear reactor designs is an area of ongoing investigation, and a focus of dedicated work for various laboratories around the world. Despite the steadfast and reliable service of Light Water Reactors (LWR), the ideal power reactor, with a combination of high operational temperature, passive safety, proliferation resistance, economic build and waste minimization remains elusive. One promising design that might address these diverse, and at times contradictory requirements, is the Molten Salt Reactor (MSR). In its most radical form, a liquid fueled (LF) MSR has the nuclear fuel dissolved in the molten-salt primary coolant itself, as demonstrated by Oak Ridge National Lab (ORNL) in 1965 to 1969. An alternative fuel arrangement is to retain conventional, solid fuel elements. A proposed method is to implement pebble fuel elements, as have been used in previous gas-cooled reactors, with the gas coolant being replaced with a molten salt. This is referred to as pebble-bed, molten-salt reactor (PB-MSR). The spherical fuel pebbles used within PB-MSRs contain TRISO particles dispersed throughout the pebble's graphite matrix. Many pebbles are constrained to form a porous bed within the core region of a reactor. Coolant molten-salt passes through the pebble bed to remove heat produced due to the nuclear fission taking place within the fuel pebbles' TRISO particles. Various benefits are apparent with the PB-MSR design. When considering the choice of fuel elements, they are a geometry that has been produced and utilized in a similar way in the past, within gas-cooled reactors. The fuel pebbles are also able to be added to, and removed from, the core during operation, enabling on-line refueling. When considering the coolant choice, molten-salts have much higher boiling points (1703 K at 1 atm. for FLiBe) than conventional coolants such as water (630 K at 150 atm.), and are capable of reaching these temperatures at atmospheric pressure. This in turn removes the need for high pressure containment that is present in light water reactors and gas-cooled reactors. The future implementation of new reactors, and the search for improvements in efficiency and safety in current designs, require the advancement of simulation tools, which this work ultimately aims to address.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of mechanical properties and deformation behavior of highly irradiated 316L stainless steel from target modules at the Spallation Neutron Source using digital image correlation analysis

Tensile specimens with irradiation doses ranging from approximately 0.7 to 7.6 displacements per atom (dpa) were fabricated from 316L samples removed from Spallation Neutron Source (SNS) target vessels after service. Tensile tests were performed in conjunction with digital image correlation (DIC) characterization, which permitted detailed analysis of the strain distribution and deformation behavior of the specimen gauge sections during testing. The results show, while considerable hardening (500–700 MPa increase in yield strength) occurred in the 316L SNS target material with increasing dose, appreciable ductility (19–23% total elongation) remained in the material after irradiation to 7.6 dpa in the mixed neutron/proton environment of the SNS target region. The DIC data showed the strain distribution and deformation behavior of all irradiated specimens were nonuniform during testing. Strain localization in the form of deformation bands or “hotspots” was observed during testing, and in some specimens, the bands propagated as deformation waves along the gauge section. The “traveling wave” deformation behavior affected the amount of elongation each specimen achieved, and the scatter in the elongation data was attributed to the large variation in deformation behavior observed among different specimens. Bands of localized strain, or deformation bands, oriented at specific angles were observed in two-dimensional plots of the strain distribution in the gauge sections of some specimens. Overall, this paper describes the experimental procedures, results, and deformation behavior of tensile specimens from SNS targets after service and illustrates the value of DIC characterization during tensile testing of irradiated materials.

36 MATERIALS SCIENCE↗

Eleven Countries, an Integrated Spacecraft: the Story of International Collaboration that Built the Orion Spacecraft and Powered the Success of the Artemis I Mission

The quest to return humans to the Moon in the next step towards humanity's exploration of space is more alive than ever. After a great deal of achievements, failures, and lessons learned, the Artemis I mission set o to the Moon on November 16, 2022, with the goal of testing a new rocket, the Space Launch System, and a new spacecraft, Orion: designed, assembled, and tested across two continents, and 11 countries. Behind this mission, decades of experience with the International Space Station, Autonomous Transfer Vehicle operations, and many other program collaborations built the know-how on how to succeed together in the toughest environment | deep space. The Artemis I mission proved to be an incredible success, meeting 161 total mission objectives, including 21 developed during the flight based on outperforming spacecraft. It was also a case-study in international collaboration, given that ESA, NASA, and industry partners Airbus and Lockheed Martin for the first time had to design, build, test, and fly a fully integrated human-rated spacecraft, with most critical functions dependent and interconnected across U.S. and European systems. The U.S.-built Orion Crew Module and Crew Module Adapter and European-built European Service Module (ESM) shared critical interfaces and commodities, from propulsion, avionics, active/passive thermal, electrical power generation, storage and distribution to the software that managed it all. In this paper, we will describe relevant aspects of the integrated spacecraft design, providing context for the challenges that the team faced in all phases required to get Orion ready to fly, and provide a direct account of how the joint team formed, trained, and supported the operations of the successful Artemis I mission. We will also explore the evolution of the partnerships, given that these allow a multi-national e ort to sustain the program production, share costs, leverage a broader base of engineering expertise, and build more diverse capabilities over the long haul to support the Artemis goals and objectives. Lastly, we will cover critical lessons learned and how the Orion Program has implemented these in preparation of the next Artemis missions to repeat the success of Artemis I. The purpose of this paper is to document knowledge we gained and lessons we learned through the development of an integrated Orion spacecraft, since it is imperative we build on this now, at the dawn of the Artemis Program, an international endeavor to push human space exploration.

Deep Space Exploration↗

Trade-offs of forest management scenarios on forest carbon exchange and threatened and endangered species habitat

Management of forest lands under climate warming poses challenges to managers, some of which are difficult to predict. Examining the trade-offs associated with forest stewardship choices is essential to avoid consequences with loss of natural capital. We utilized LANDIS-II process model simulations for three forested sites located in disparate parts of the United States with the purpose of understanding the trade-offs imposed by management choices under climate warming and associated wildfire. There were only small trade-offs that emerged from the simulations, between habitat area for threatened and endangered species (TES), net ecosystem exchange for CO2 (NEE), and risk of wildfire. Stand management in the form of thinning and prescribed burning typically increased NEE while simultaneously increasing habitat for TES, while reducing the risk of wildfire. These benefits were also observed under a climate warming scenario; however, the benefits were greatly outweighed by the negative impacts f warming on both TES habitat and NEE. Balancing these ecosystem services via thinning and burning treatments is a strategic approach to mitigate risks of wildfire both currently and under a warming future climate.

54 ENVIRONMENTAL SCIENCES↗

On Delamination Toughening of a 14YWT Nanostructured Ferritic Alloy

The FCRD NFA-1 is a high strength, irradiation tolerant nanostructured ferritic alloy (NFA) produced by ball milling argon atomized Fe-14Cr-3W-0.35Ti-0.25Y (wt.%) and FeO powders, followed by hot extrusion at 850 °C, and subsequent annealing and cross-rolling at 1000 °C. The microstructure of the resulting ≈10 mm thick NFA-1 plate is dominated by ultrafine sub-micron pancake shaped grains, and a large population of microcracks lying on planes parallel to the plate faces. Pre-cracked fracture toughness tests in four different orientations (L-T, T-L, L-S and T-S) show stable crack growth by ductile tearing, with peak load K Jc from ≈ 88 to 154 MPa√m at ambient temperature. Stable crack tearing persists down to ≈ -175 °C and is accompanied by extensive delamination due to the propagation of the microcracks. Depending on the specimen orientation, this unusual toughening mechanism is either due to a reduction of crack tip stresses in thin ligaments formed by the delaminations (L-T and T-L), or 90° deflection of cracks initially running normal to the delaminations (L-S and T-S), thereby suppressing cleavage in both cases. Lastly, understanding the fracture processes in NFA-1 is also important to its irradiation tolerance in nuclear service as well as its fabricability in making defect-free components such as thin-walled tubing.

36 MATERIALS SCIENCE↗

Financial Relationships With Industry of Editorial Board Members of the Three Journals of the American Society for Radiation Oncology

Purpose: To quantitate financial conflicts of interest (FCOIs) among radiation oncology peer-reviewers, specifically editorial board members of the 3 American Society for Radiation Oncology journals. Methods and Materials: The public Centers for Medicare and Medicaid Services Open Payments database delineates payments in 3 categories (general payments, research funding, and company ownership). After excluding non-US and non-MDs, names of board members were searched. Values of each FCOI were extracted for 2013 to 2015 and compiled. Results: Of 85 board members, 65 (76%) received any form of payment during the overall period. The majority of delivered payments were general payments: 59 (69%) received at least 1 general payment during these 3 years. In each year, 9 board members (11%) received research funding, and 3 board members (4%) reported company ownership. Over the studied period, all board members received a sum total of $5,387,985; this was composed of $665,801 (12%) in general payments, $3,758,968 (70%) in research funding, and $963,216 (18%) in company ownership. The mean general payment and research funding amounts (all members) were $2,621 and $14,741, respectively. Median (interquartile range) general payments and research funding only in board members receiving payments were $419 ($91-$5072) and $56,250 ($13,345-$200,000), respectively. When assessing general payments according to amount, the vast majority of editorial board members received lower-quantity or no such payments, along with a smaller proportion that received higher-volume payments. The most frequent sources of general payments were Varian, Elekta, and Bristol-Myers Squibb. Merck and Varian were the most frequent funding sources for research payments. Conclusions: In this population, the majority of FCOIs were general payments, but research funding comprised the highest monetary sums. Large-volume FCOIs do not apply to the vast majority of editorial board members, implying that the maintained integrity of academic peer-review is likely not influenced to a large extent by FCOIs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Promotional effect of surface hydroxyls on electrochemical reduction of CO2 over SnOx/Sn electrode

Tin oxide (SnOx) formation on tin-based electrode surfaces during CO2 electrochemical reduction can have a significant impact on the activity and selectivity of the reaction. In the present study, density functional theory (DFT) calculations have been performed to understand the role of SnOx in CO2 reduction using a SnO monolayer on the Sn(112) surface as a model for SnOx. Water molecules have been treated explicitly and considered actively participating in the reaction. The results showed that H2O dissociates on the perfect SnO monolayer into two hydroxyl groups symmetrically on the surface. CO2 energetically prefers to react with the hydroxyl, forming a bicarbonate (HCO3(t)*) intermediate, which can then be reduced to either formate (HCOO*) by hydrogenating the carbon atom or carboxyl (COOH*) by protonating the oxygen atom. Both steps involve a simultaneous C-O bond breaking. Further reduction of HCOO* species leads to the formation of formic acid in the acidic solution at pH < 4, while the COOH* will decompose to CO and H2O via protonation. Whereas the oxygen vacancy (VO) in the monolayer maybe formed by the reduction of the monolayer, it can be recovered by H2O dissociation, resulting in two embedded hydroxyl groups. However, the hydroxylated surface with two symmetric hydroxyls is energetically more favorable for CO2 reduction than the hydroxylated VO surface with two embedded hydroxyls. The reduction potential for the former has a limiting-potential of -0.20 V (RHE), lower than that for the latter (-0.74 V (RHE)). Compared to the pure Sn electrode, the formation of SnOx monolayer on the electrode under the operating conditions promotes CO2 reduction more effectively by forming surface hydroxyls, thereby, providing a new channel via COOH* to the CO formation, although formic acid is still the major reduction product. The work was supported in part by National Natural Sciences Foundation of China (Grant #21373148 and #21206117). The High Performance Computing Center of Tianjin University is acknowledged for providing services to the computing cluster. CC acknowledges the support of 24 China Scholarship Council (CSC). QG acknowledges the support of NSF-CBET program (Award no. CBET-1438440). DM was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. The computations were performed in part using the Molecular Science Computing Facility in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), which is a U.S. Department of Energy national scientific user facility located at Pacific Northwest National Laboratory (PNNL) in Richland, Washington.

bicarbonate↗

Model-based, in-situ, non-destructive qualification and certification of parts made by autonomous additive manufacturing

To address the significant productivity challenges associated with the qualification and certification (Q&C) tasks of additively manufactured (AM) parts, which have traditionally relied on rigorous post‐build inspection and testing, we propose an integrated framework that combines model‐based qualification and certification (MBQ&C) with autonomous additive manufacturing (AAM). MBQ&C employs high‐fidelity predictive models, developed within the Integrated Computational Materials Engineering (ICME) paradigm, to simulate process–structure–property–performance relationships for assessing a part’s fitness for use. Since predictive models are commonly machine learning (ML)-based or reduced-order surrogates of validated physics models, they run efficiently, enabling timely inference. In parallel, the self-driving AAM utilises ML-based adaptive, closed‐loop control strategies to avoid, mitigate, or repair defects and anomalies during fabrication, thereby increasing the likelihood of producing acceptable parts. A key feature of the combined AAM-MBQ&C framework is that predictive models explicitly incorporate defects or anomalies that persist after the build, using instance-specific data captured via in-situ sensing. This customisation enables a build‐specific assessment of fitness for use, rather than relying on nominal or generic parameters. Such individualised evaluation provides a robust basis for Q&C-related acceptance decisions relating to each build. Additionally, the rapid solution capabilities of ML or reduced-order models enable the determination of a part’s suitability for service shortly after build completion. As the framework matures, it has the potential to substantially reduce reliance on conventional point‐design approaches—such as time‐consuming post‐build computed tomography scanning and costly destructive testing. Thus, the AAM-MBQ&C framework represents a transformative, scalable strategy for quality assurance of AM components, as parts produced within a stable, validated, and certified envelope can be certified with reduced testing. Key benefits include: (1) significant gains in Q&C productivity through efficient, model-centric assessment; (2) performance-based classification of defects into critical and non-critical categories; (3) the ability to predict potential deviations in the performance of parts affected by real-time, adaptive process control interventions relative to those produced under a certified process, and (4) the enabling of virtual Q&C for service environments that are difficult, hazardous, or impractical to access or reproduce experimentally. Collectively, these capabilities strengthen the business case for AM, particularly for high‐consequence and mission‐critical applications. Finally, although this work focuses on powder-based AM, the proposed techniques could be extended to AM processes employing alternative feedstock forms.

Gunasegaram, Dayalan↗

Final Technical Report: Amicus O&M Cooperative

Despite the maturation of the broader solar PV industry, the operations and maintenance (O&M) market segment is still relatively under developed. The lack of industry coherence jeopardizes the long-term performance of multiple gigawatts of installed capacity, and thus, the legitimacy of solar PV as a dependable source of electricity generation in the U.S. To address these challenges, the project team formed a new company, the Amicus Operations and Maintenance (O&M) Cooperative, whose mission is to ensure that solar PV fulfills its promise as a responsible and reliable energy source, for generations to come. Amicus O&M Cooperative created solutions to the market gaps by establishing a consistent level of O&M service offerings; standardizing scopes of work and legal agreements; training and certifying technicians; minimizing transaction costs for asset owners; and mitigating risk by creating redundancy in the companies who are able to perform work to these standards. We attracted double the number of member-companies originally forecast (goal: 10, actual: 20), broadening the reach of the service area, minimizing travel costs, and reducing response times for O&M services. We built a professional website and a software platform for managing work orders. Lastly, we have established multiple channels for communication among members, including monthly calls for sales topics and for technical/operational topics, an intranet for announcements/ questions/articles, and regular in-person meetings in association with the meetings of our sister cooperative, Amicus Solar. Throughout the project, participants sought feedback, input, and insights from stakeholders in the O&M market segment, including current and potential member-companies and potential clients. The problem statement above was confirmed many times over, with additional insight on the need for more workforce development, driving efficiency and lowering cost through better data analysis and remote diagnostics, and finding ways to reduce the cost of secondary and ancillary services as well (including items such as vegetation management and module cleaning). For solar to maintain its status as a reliable energy source – and for it to continue attracting investment – it must perform to expectation. This is where solar PV O&M technicians come into play. The cooperative helps them perform their work more cost effectively by streamlining “soft costs” including legal costs and work management, as well as reducing travel time and expenses. The new cooperative has demonstrated significant price reductions for O&M services relative to reported industry averages, which benefits clients directly and the public indirectly through cleaner air, economic development, and job growth.

14 SOLAR ENERGY↗

Implementation of a feature selection algorithm in FARM to identify important state variables and time-invariant matrices

The FARM (Feasible Actuator Range Modifier) software module is a component of the RAVEN-based FORCE framework for analysis of Integrated Energy Systems (IES). FARM aids the HERON software module in the evaluation of the optimal dispatch for the different IES components. Set-point trajectories are required to meet limits on both production variables (i.e., the variables to be optimized such as the electrical power, the hydrogen production rate, etc.) and process variables tied to the service life of equipment (e.g., steam flowrate, vessel pressure, turbine firing temperature, etc.). To evaluate the feasibility of HERON generated set-points and to do so in an acceptable time, FARM employs reduced order models to represent the dynamic behavior of the systems to be dispatched. These surrogate models take the form of a linear dynamic system with sets of Linear Parameter Varying (LPV) matrices that are mapped to the system operating space. These matrices are derived from the trajectories of system state variables and system output variables during transients. The accuracy of LPV matrices depends on the selection of state variables. In previous reports, state variables were selected by adopting a complicated workflow requiring multiple software licenses and an advanced level of user expertise. In this report, a new workflow that automates the state variable selection process is presented. It significantly reduces the frequency of user interventions and does not require multiple software licenses. Each module in the new workflow is described in detail, and the input / output examples in each step of the workflow are provided. It was demonstrated that this workflow can greatly reduce the complexity of the state variable selection process, and that the updated FARM-Gamma and FARM-Delta validators can benefit from this workflow when solving the power dispatch problem of a representative IES test case. Finally, some code improvements that can further enhance the efficiency are suggested.

42 ENGINEERING↗

High Temperature Oxidation Behavior of gamma-Ni+gamma'-Ni3Al Alloys and Coatings Modified with Pt and Reactive Elements

Materials for high-pressure turbine blades must be able to operate in the high-temperature gases (above 1000 C) emerging from the combustion chamber. Accordingly, the development of nickel-based superalloys has been constantly motivated by the need to have improved engine efficiency, reliability and service lifetime under the harsh conditions imposed by the turbine environment. However, the melting point of nickel (1455 C) provides a natural ceiling for the temperature capability of nickel-based superalloys. Thus, surface-engineered turbine components with modified diffusion coatings and overlay coatings are used. Theses coatings are capable of forming a compact and adherent oxide scale, which greatly impedes the further transport of reactants between the high-temperature gases and the underlying metal and thus reducing attack by the atmosphere. Typically, these coatings contain β-NiAl as a principal constituent phase in order to have sufficient aluminum content to form an Al 2 O 3 scale at elevated temperatures. The drawbacks to the currently-used {beta}-based coatings, such as phase instabilities, associated stresses induced by such phase instabilities, and extensive coating/substrate interdiffusion, are major motivations in this study to seek next-generation coatings. The high-temperature oxidation resistance of novel Pt + Hf-modified γ-Ni + γ-Ni 3 Al-based alloys and coatings were investigated in this study. Both early-stage and 4-days isothermal oxidation behavior of single-phase γ-Ni and γ'-Ni 3 Al alloys were assessed by examining the weight changes, oxide-scale structures, and elemental concentration profiles through the scales and subsurface alloy regions. It was found that Pt promotes Al 2 O 3 formation by suppressing the NiO growth on both γ-Ni and γ'Ni 3 Al single-phase alloys. This effect increases with increasing Pt content. Moreover, Pt exhibits this effect even at lower temperatures (~970 C) in the very early stage of oxidation. It was also inferred that Pt enhances the diffusive flux of aluminum from the substrate to the scale/alloy interface. Relatively low levels of hafnium addition to Pt-free γ'-Ni 3 Al increased the extent of external NiO formation due to non-protective HfO 2 formation. Accordingly, this effect intensified with increasing Hf content from 0.2 to 0.5 at.%.

36 MATERIALS SCIENCE↗

NASA's technology plans - Will technology be ready when we are

Recent low NASA science and technology budgets impacted unfavorably on trade balances of aerospace products and lags in several technological areas impinged on other areas already in application which could not be exploited or did not achieve desired performance levels. NASA has formed a Civil Space Technology Initiative, for 1988 start, to foster research on safe and efficient access to space, earth orbiting operations, and science support technologies. R&D programs for fully reusable launch systems, aerobraking concepts, and a multi-arm, highly autonomous capability for space-based remote assembly, repair and servicing of space vehicles are described. Regarding science, emphasis will be placed on large flexible structures and the associated control programs, sensors and data handling and analysis equipment and programs. Finally, technologies common to human activities in regions beyond the Space Station are to be explored in the second phase of the NASA initiative, Pathfinder.

Colladay, Raymond S.↗

Presentation planning using an integrated knowledge base

A description is given of user interface research aimed at bringing together multiple input and output modes in a way that handles mixed mode input (commands, menus, forms, natural language), interacts with a diverse collection of underlying software utilities in a uniform way, and presents the results through a combination of output modes including natural language text, maps, charts and graphs. The system, Integrated Interfaces, derives much of its ability to interact uniformly with the user and the underlying services and to build its presentations, from the information present in a central knowledge base. This knowledge base integrates models of the application domain (Navy ships in the Pacific region, in the current demonstration version); the structure of visual displays and their graphical features; the underlying services (data bases and expert systems); and interface functions. The emphasis is on a presentation planner that uses the knowledge base to produce multi-modal output. There has been a flurry of recent work in user interface management systems. (Several recent examples are listed in the references). Existing work is characterized by an attempt to relieve the software designer of the burden of handcrafting an interface for each application. The work has generally focused on intelligently handling input. This paper deals with the other end of the pipeline - presentations.

Arens, Yigal↗

Intern Summary Reports

Topics covered include: Probe Station Antenna Range; LERCIP 2004 Summary; L.E.R.C.I.P. Internship Summary; Hubble Space Telescope Bi-Stem Thermal Shield Analyses; GRABER - the Duct Tape of Space and JIMO Heat Conducting Foam; CDF and PDF Comparison Between Humacao, Puerto Rico and Florida; Development of the On-board Aircraft Network; Development of the Planar Inlet Design and Analysis Process (PINDAP); An Overview of My 2004 Summer Internship [Non-destructive Evaluation]; My Summer Experience as an Administrative Officer Assistant [in the Safety and Assurance Directorate Office]; Programming an Experiment Control System; Reducing the Cation Exchange Capacity of Lithium Clay to Form Better Dispersed; Polymer-Clay Nanocomposites; Feasibility of EB Welded Hastelloy X and Combination of Refractory Metals; My Work in the NASA Glenn History Office and Records Management Office; Education, Technology, and Media: A Peak into My Summer Internship at NASA Glenn Research Center in Cleveland, Ohio; [The Engineering and Technical Services Directorate at the Glenn Research Center]; Drinking Water Database; Design of an EXB Probe; and Texturing Carbon-carbon Composite Radiator Surfaces Utilizing Atomic Oxygen.

Source record↗

Hail Size Distribution Mapping

A 3-D weather radar visualization software program was developed and implemented as part of an experimental Launch Pad 39 Hail Monitor System. 3DRadPlot, a radar plotting program, is one of several software modules that form building blocks of the hail data processing and analysis system (the complete software processing system under development). The spatial and temporal mapping algorithms were originally developed through research at the University of Central Florida, funded by NASA s Tropical Rainfall Measurement Mission (TRMM), where the goal was to merge National Weather Service (NWS) Next-Generation Weather Radar (NEXRAD) volume reflectivity data with drop size distribution data acquired from a cluster of raindrop disdrometers. In this current work, we adapted these algorithms to process data from a cluster of hail disdrometers positioned around Launch Pads 39A or 39B, along with the corresponding NWS radar data. Radar data from all NWS NEXRAD sites is archived at the National Climatic Data Center (NCDC). That data can be readily accessed at . 3DRadPlot plots Level III reflectivity data at four scan elevations (this software is available at Open Channel Software, ). By using spatial and temporal interpolation/extrapolation based on hydrometeor fall dynamics, we can merge the hail disdrometer array data coupled with local Weather Surveillance Radar-1988, Doppler (WSR-88D) radial velocity and reflectivity data into a 4-D (3-D space and time) picture of hail size distributions. Hail flux maps can then be generated and used for damage prediction and assessment over specific surfaces corresponding to structures within the disdrometer array volume. Immediately following a hail storm, specific damage areas and degree of damage can be identified for inspection crews.

Source record↗

A System to Provide Real-Time Collaborative Situational Awareness by Web Enabling a Distributed Sensor Network

In this paper, we describe the architecture of both the PATS and SAP systems and how these two systems interoperate with each other forming a unified capability for deploying intelligence in hostile environments with the objective of providing actionable situational awareness of individuals. The SAP system works in concert with the UICDS information sharing middleware to provide data fusion from multiple sources. UICDS can then publish the sensor data using the OGC's Web Mapping Service, Web Feature Service, and Sensor Observation Service standards. The system described in the paper is able to integrate a spatially distributed sensor system, operating without the benefit of the Web infrastructure, with a remote monitoring and control system that is equipped to take advantage of SWE.

Visualization↗

The Importance of User Feedback in Sustaining Trusted Repositories

The NASA Earth Observation System Data and Information System (EOSDIS) has been operating since 1994 and is serving a global user community with well-managed Earth science data in a variety of scientific disciplines. EOSDIS processes, archives and distributes data and information products resulting from spaceborne and airborne instruments as well as in situ measurements from field campaigns. The Earth Science Data and Information System (ESDIS) Project at the NASA Goddard Space Flight Center manages EOSDIS with its 12 Distributed Active Archive Centers (DAACs) located across the United States. During the entire life of EOSDIS, the ESDIS Project and the DAACs have deployed many different mechanisms for user feedback, which have proven extremely valuable to their evolution and performance in their service to user communities. Some of the inputs from our user groups have resulted in fundamental changes in the architecture, design and operations of EOSDIS, while others have provided novel ideas for incremental changes. The EOSDIS DAACs have User Working Groups (UWGs) that represent broad user communities in the Earth science disciplines served by the DAACs. The UWGs meet periodically to assess and provide feedback on dataset and service priorities. As regular users of the data and services of the DAAC and experts in the scientific disciplines, the UWG members provide valuable inputs for planning and prioritizing the services, as well as addition of new datasets, for the benefit of the community. The EOSDIS is evaluated annually through an independently administered survey of its users resulting in the American Customer Satisfaction Index (ACSI). The survey provides an ACSI score as well as free-text suggestions from users, which are also helpful in making specific system improvements. In addition, each of the DAACs has a user services group that address on-going requests for help and other comments from users. The ESDIS Project has established a mechanism through the "earthdata" website (http://earthdata.nasa.gov) for users to provide feedback of any kind and these questions/comments are routed to the appropriate individuals in the Project or the DAACs. These various forms of receiving user feedback and responding to them continue to be extremely valuable in evolving and sustaining our Earth Science repository.

Behnke, Jeanne↗