Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Fluid Dynamics of Bubbly Liquids

Experiments have been performed to study the average flow properties of inertially dominated bubbly liquids which may be described by a novel analysis. Bubbles with high Reynolds number and low Weber number may produce a fluid velocity disturbance that can be approximated by a potential flow. We studied the behavior of suspensions of bubbles of about 1.5 mm diameter in vertical and inclined channels. The suspension was produced using a bank of 900 glass capillaries with inner diameter of about 100 microns in a quasi-steady fashion. In addition, salt was added to the suspension to prevent bubble-bubble coalescence. As a result, a nearly monodisperse suspension of bubble was produced. By increasing the inclination angle, we were able to explore an increasing amount of shear to buoyancy motion. A pipe flow experiment with the liquid being recirculated is under construction. This will provide an even larger range of shear to buoyancy motion. We are planning a microgravity experiment in which a bubble suspension is subjected to shearing in a couette cell in the absence of a buoyancy-driven relative motion of the two phases. By employing a single-wire, hot film anemometer, we were able to obtain the liquid velocity fluctuations. The shear stress at the wall was measured using a hot film probe flush mounted on the wall. The gas volume fraction, bubble velocity, and bubble velocity fluctuations were measured using a homemade, dual impedance probe. In addition, we also employed a high-speed camera to obtain the bubble size distribution and bubble shape in a dilute suspension. A rapid decrease in bubble velocity for a dilute bubble suspension is attributed to the effects of bubble-wall collisions. The more gradual decrease of bubble velocity as gas volume fraction increases, due to subsequent hindering of bubble motion, is in qualitative agreement with the predictions of Spelt and Sangani for the effects of potential-flow bubble-bubble interactions on the mean velocity. The ratio of the bubble velocity variance to the square of the mean is 0(0.1). For these conditions Spelt and Sangani predicted that the homogeneous suspension would be unstable and clustering into horizontal rafts will take place. Evidence for bubble clustering is obtained by analysis of video images. The liquid velocity variance is larger than would be expected for a homogeneous suspension and the liquid velocity frequency spectrum indicates the presence of velocity fluctuations that are slow compared with the time for the passage of an individual bubble. These observations provide further evidence for bubble clustering.

Tsang, Y. H.↗

Computational Fluid Dynamics (CFD): Future role and requirements as viewed by an applied aerodynamicist

The problem of designing the wing-fuselage configuration of an advanced transonic commercial airliner and the optimization of a supercruiser fighter are sketched, pointing out the essential fluid mechanical phenomena that play an important role. Such problems suggest that for a numerical method to be useful, it must be able to treat highly three dimensional turbulent separations, flows with jet engine exhausts, and complex vehicle configurations. Weaknesses of the two principal tools of the aerodynamicist, the wind tunnel and the computer, suggest a complementing combined use of these tools, which is illustrated by the case of the transonic wing-fuselage design. The anticipated difficulties in developing an adequate turbulent transport model suggest that such an approach may have to suffice for an extended period. On a longer term, experimentation of turbulent transport in meaningful cases must be intensified to provide a data base for both modeling and theory validation purposes.

Yoshihara, H.↗

Numerical and analytical study of fluid dynamic forces in seals and bearings

Study results for rotor/bearing/seal system models are compared with both a numerical model based on a transformed, conservative version of the three-dimensional Navier-Stokes equation, and an analytical model based on 'lumped' fluid parameters. Rotor-destabilizing factors are related to flow field rotation; it is shown that these factors can be reduced through a decrease in the fluid average circumferential velocity. A transformation of the Navier-Stokes equations to those for a rotating observer and a numerical code with a nonorthogonal body-fitted grid are used to carry out numerical experiments demonstrating the character of the complex flow field.

Tam, L. T.↗

Superfluid {sup 3}He, a two-fluid system, with the normal-fluid dynamics dominated by Andreev reflection

As a specific offering towards his festschrift, we present a review the various properties of the excitation gas in superfluid {sup 3}He, which depend on Andreev reflection. This phenomenon dominates many of the properties of the normal fluid, especially at the lowest temperatures. We outline the ideas behind this dominance and describe a sample of the many experiments in this system which the operation of Andreev reflection has made possible, from temperature measurement, particle detection, vortex imaging to cosmological analogues.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Agent-Based Chemical Plume Tracing Using Fluid Dynamics

This paper presents a rigorous evaluation of a novel, distributed chemical plume tracing algorithm. The algorithm is a combination of the best aspects of the two most popular predecessors for this task. Furthermore, it is based on solid, formal principles from the field of fluid mechanics. The algorithm is applied by a network of mobile sensing agents (e.g., robots or micro-air vehicles) that sense the ambient fluid velocity and chemical concentration, and calculate derivatives. The algorithm drives the robotic network to the source of the toxic plume, where measures can be taken to disable the source emitter. This work is part of a much larger effort in research and development of a physics-based approach to developing networks of mobile sensing agents for monitoring, tracking, reporting and responding to hazardous conditions.

Zarzhitsky, Dimitri↗

Coupled Fluid Dynamics and Material Response Simulations for Nitrogen High Enthalpy Flows

The study focuses on the interaction of nitrogen flows with thermal protection systems during atmospheric re-entry for NASA flight missions. The Ares multiphysics coupling tool is employed to investigate the coupling between the fluid (US3D) and material response (Icarus) solvers using various modeling approaches. These approaches include the equilibrium thin-film coefficients approach, a weakly coupled approach with temperature coupling, and an approach considering the full chemical composition of the surface and the transfer of pyrolysis gases. The objective is to understand and accurately represent the mechanisms of nitrogen interaction with the surface, such as nitridation and catalytic recombination. The study aims to assess the accuracy of the different approaches by comparing them to experimental results obtained from NASA arc-jet facilities. By addressing these challenges and improving the understanding of nitrogen-surface interactions, it is expected to enhance the design and performance analysis of thermal protection systems for future missions.

Ablation↗

Technical evaluation report, AGARD Fluid Dynamics Panel Symposium on Effects of Adverse Weather on Aerodynamics

The purpose of the meeting on Effects of Adverse Weather on Aerodynamics was to provide an update of the stae-of-the-art with respect to the prediction, simulation, and measurement of the effects of icing, anti-icing fluids, and various precipitation on the aerodynamic characteristics of flight vehicles. Sessions were devoted to introductory and survey papers and icing certification issues, to analytical and experimental simulation of ice frost contamination and its effects of aerodynamics, and to the effects of heavy rain and deicing/anti-icing fluids.

Reinmann, J. J.↗

Capturing the 3D motion of an infalling galaxy via fluid dynamics

The Fornax Cluster is the nearest (⩽20 Mpc) galaxy cluster in the southern sky. NGC 1404 is a bright elliptical galaxy falling through the intracluster medium (ICM) of the Fornax Cluster. The sharp leading edge of NGC 1404 forms a classical “cold front” that separates 0.6 keV dense interstellar medium and 1.5 keV diffuse ICM. We measure the angular pressure variation along the cold front using a very deep (670 ks) Chandra X-ray observation. We are taking the classical approach—using stagnation pressure to determine a substructure’s speed—to the next level by not only deriving a general speed but also directionality, which yields the complete velocity field as well as the distance of the substructure directly from the pressure distribution. We find a hydrodynamic model consistent with the pressure jump along NGC 1404's atmosphere measured in multiple directions. The best-fit model gives an inclination of 33° and a Mach number of 1.3 for the infall of NGC 1404, in agreement with complementary measurements of the motion of NGC 1404. Our study demonstrates the successful treatment of a highly ionized ICM as ideal fluid flow, in support of the hypothesis that magnetic pressure is not dynamically important over most of the virial region of galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

New developments in adaptive methods for computational fluid dynamics

New developments in a posteriori error estimates, smart algorithms, and h- and h-p adaptive finite element methods are discussed in the context of two- and three-dimensional compressible and incompressible flow simulations. Applications to rotor-stator interaction, rotorcraft aerodynamics, shock and viscous boundary layer interaction and fluid-structure interaction problems are discussed.

Oden, J. T.↗

A dissipation-based method for improving the accuracy of computational fluid dynamics simulations of high level non-Newtonian wastes

Here this paper investigates a new viscosity model for laminar, transitional, and turbulent pipe flow simulations of a non-Newtonian slurry using the Star-CCM+ software. Herschel-Bulkley (HB) rheology equation was used in its original and modified forms to model the fluid viscosity. The realizable k-ε model was used for modeling of turbulence. It was observed that simulations using the HB model predicted inaccurate profiles of U (mean velocity) and U + (mean velocity in wall units). Therefore, we developed alternative values of viscosity obtained directly from non-linearity of stress–strain variation (α) in each iteration. The developed method, “Alpha method”, applied changes in places where dissipation rate of turbulent kinetic energy occurred and was designed based on local or global dissipation rate values. Inverse values of α were used to test effects of more viscosity reduction for all flow regimes. In prediction of the mean velocities, significant improvements were obtained through global adjustment of viscosity in inverse form during simulation of the laminar and turbulent flow cases. For the transitional flow, obtaining improvements in prediction of U and U + from the same model version faced challenges. While the global adjustments in direct form were found significantly effective in improving the prediction of U, they failed to predict the U + accurately. For this purpose, Local viscosity adjustments were found significantly effective.

42 ENGINEERING↗

Strongly hyperbolic quasilinear systems revisited, with applications to relativistic fluid dynamics

We revisit the theory of first-order quasilinear systems with diagonalizable principal part and only real eigenvalues, what is commonly referred to as strongly hyperbolic systems. We provide a self-contained and simple proof of local well-posedness, in the Hadamard sense, of the Cauchy problem. Our regularity assumptions are very minimal. As an application, we apply our results to systems of ideal and viscous relativistic fluids, where the theory of strongly hyperbolic equations has been systematically used to study several systems of physical interest.

Mathematics↗

A Computational Fluid Dynamic and Heat Transfer Model for Gaseous Core and Gas Cooled Space Power and Propulsion Reactors

A computational model based on the axisymmetric, thin-layer Navier-Stokes equations is developed to predict the convective, radiation and conductive heat transfer in high temperature space nuclear reactors. An implicit-explicit, finite volume, MacCormack method in conjunction with the Gauss-Seidel line iteration procedure is utilized to solve the thermal and fluid governing equations. Simulation of coolant and propellant flows in these reactors involves the subsonic and supersonic flows of hydrogen, helium and uranium tetrafluoride under variable boundary conditions. An enthalpy-rebalancing scheme is developed and implemented to enhance and accelerate the rate of convergence when a wall heat flux boundary condition is used. The model also incorporated the Baldwin and Lomax two-layer algebraic turbulence scheme for the calculation of the turbulent kinetic energy and eddy diffusivity of energy. The Rosseland diffusion approximation is used to simulate the radiative energy transfer in the optically thick environment of gas core reactors. The computational model is benchmarked with experimental data on flow separation angle and drag force acting on a suspended sphere in a cylindrical tube. The heat transfer is validated by comparing the computed results with the standard heat transfer correlations predictions. The model is used to simulate flow and heat transfer under a variety of design conditions. The effect of internal heat generation on the heat transfer in the gas core reactors is examined for a variety of power densities, 100 W/cc, 500 W/cc and 1000 W/cc. The maximum temperature, corresponding with the heat generation rates, are 2150 K, 2750 K and 3550 K, respectively. This analysis shows that the maximum temperature is strongly dependent on the value of heat generation rate. It also indicates that a heat generation rate higher than 1000 W/cc is necessary to maintain the gas temperature at about 3500 K, which is typical design temperature required to achieve high efficiency in the gas core reactors. The model is also used to predict the convective and radiation heat fluxes for the gas core reactors. The maximum value of heat flux occurs at the exit of the reactor core. Radiation heat flux increases with higher wall temperature. This behavior is due to the fact that the radiative heat flux is strongly dependent on wall temperature. This study also found that at temperature close to 3500 K the radiative heat flux is comparable with the convective heat flux in a uranium fluoride failed gas core reactor.

Anghaie, S.↗

Computational fluid dynamics analysis in support of the simplex turbopump design

Simplex is a turbopump that is being developed at NASA/Marshall Space Flight Center (MSFC) by an in-house team. The turbopump consists of a single-stage centrifugal impeller, vaned-diffuser pump powered by a single-stage, axial, supersonic, partial admission turbine. The turbine is driven by warm gaseous oxygen tapped off of the hybrid motor to which it will be coupled. Rolling element bearings are cooled by the pumping fluid. Details of the configuration and operating conditions are given by Marsh. CFD has been used extensively to verify one-dimensional (1D) predictions, assess aerodynamic and hydrodynamic designs, and to provide flow environments. The complete primary flow path of the pump-end and the hot gas path of the turbine, excluding the inlet torus, have been analyzed. All CFD analyses conducted for the Simplex turbopump employed the pressure based Finite Difference Navier-Stokes (FDNS) code using a standard kappa-epsilon turbulence model with wall functions. More detailed results are presented by Garcia et. al. To support the team, loading and temperature results for the turbine rotor were provided as inputs to structural and thermal analyses, and blade loadings from the inducer were provided for structural analyses.

Garcia, Roberto↗

Boundary value problems in magnetohydrodynamics (and fluid dynamics). I - Radiation boundary condition

In view of the difficulties that emerge in numerical simulations of time-dependent phenomena involving MHD waves due to waves' artificial reflection at numerical boundaries, where time-dependent magnetic fields outside those boundaries are unknown, a method previously developed for the determination of radiative boundary conditions is generalized for the treatment of isothermal MHD waves. The illustrative problem thus treated is that of the magnetic braking of a rigidly rotating disk which is embedded in a differentially-rotating fluid. The analytic results obtained are compared with those from numerical simulations with and without the present boundary treatment.

Vanajakshi, T. C.↗

Demonstration of Fluid Dynamics for Plant Growing Systems in Varied Gravity Environments Through Scaled Capillary Models

The development of reliable and bioregenerative crop growth production systems is vital for human exploration into deep space. As humans prepare for space travel beyond LEO, scientists need to find a way to provide reliable and adequate water delivery for all stages of the plant's life cycle. Past production systems struggled with this and often led to overwatering in the system. To better understand this issue, NASA's Plant Water Management (PWM) experiments were able to model fluid flow through granular substrates, specifically a clay-based material arcilite, in 0-G. The PWM study can help researchers to predict fluid flow through the systems, however their model only works for an arcilite based system and was unable to account for different stages of plant growth. For future missions, payload requirements to support crop production system will need to be limited, leading to the use of in situ resources. This project aims to validate the PWM experiments as well as incorporate various materials into the design for growth systems. To meet these objectives, a series of terrestrial experiments will be deployed to mimic all gravities. By modifying the material, fluid, and size of the test subjects, the effect of Earth's gravity can be minimized. This project will aid researchers in the design of future crop production systems for surface missions by creating a refined model that can be used at all stages of plant growth and utilize in situ resources.

Plant Biology↗

Convergence acceleration for vector sequences and applications to computational fluid dynamics

Some recent developments in acceleration of convergence methods for vector sequences are reviewed. The methods considered are the minimal polynomial extrapolation, the reduced rank extrapolation, and the modified minimal polynomial extrapolation. The vector sequences to be accelerated are those that are obtained from the iterative solution of linear or nonlinear systems of equations. The convergence and stability properties of these methods as well as different ways of numerical implementation are discussed in detail. Based on the convergence and stability results, strategies that are useful in practical applications are suggested. Two applications to computational fluid mechanics involving the three dimensional Euler equations for ducted and external flows are considered. The numerical results demonstrate the usefulness of the methods in accelerating the convergence of the time marching techniques in the solution of steady state problems.

Sidi, Avram↗

Convergence acceleration for vector sequences and applications to computational fluid dynamics

Some recent developments in acceleration of convergence methods for vector sequences are reviewed. The methods considered are the minimal polynomial extrapolation, the reduced rank extrapolation, and the modified minimal polynomial extrapolation. The vector sequences to be accelerated are those that are obtained from the iterative solution of linear or nonlinear systems of equations. The convergence and stability properties of these methods as well as different ways of numerical implementation are discussed in detail. Based on the convergence and stability results, strategies that are useful in practical applications are suggested. Two applications to computational fluid mechanics involving the three dimensional Euler equations for ducted and external flows are considered. The numerical results demonstrate the usefulness of the methods in accelerating the convergence of the time marching techniques in the solution of steady state problems.

Sidi, Avram↗