Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “feature exploration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Mineral target areas in Nevada from geological analysis of LANDSAT-1 imagery

Geological analysis of LANDSAT-1 Scene MSS 1053-17540 suggests that certain known mineral districts in east-central Nevada frequently occur near faults or at faults or lineament intersections and areas of complex deformation and flexures. Seventeen (17) areas of analogous characteristics were identified as favorable targets for mineral exploration. During reconnaissance field trips eleven areas were visited. In three areas evidence was found of mining and/or prospecting not known before the field trips. In four areas favorable structural and alteration features were observed which call for more detailed field studies. In one of the four areas limonitic iron oxide samples were found in the regolith of a brecciated dolomite ridge. This area contains quartz veins, granitic and volcanic rocks and lies near the intersection of two linear fault structures identified in the LANDSAT-1 imagery. Semiquantitative spectroscopic analysis of selected portions of the samples showed abnormal contents of arsenic, molybdenum, copper, lead, zinc, and silver. These limonitic samples found were not in situ and further field studies are required to assess their source and significance.

Abdel-Gawad, M.↗

Empirical model of atomic nitrogen in the upper thermosphere

Atomic nitrogen number densities in the upper thermosphere measured by the open source neutral mass spectrometer (OSS) on Atmosphere Explorer-C during 1974 and part of 1975 have been used to construct a global empirical model at an altitude of 375 km based on a spherical harmonic expansion. The most evident features of the model are large diurnal and seasonal variations of atomic nitrogen and only a moderate and latitude-dependent density increase during periods of geomagnetic activity. Maximum and minimum N number densities at 375 km for periods of low solar activity are 3.6 x 10 to the 6th/cu cm at 1500 LST (local solar time) and low latitude in the summer hemisphere and 1.5 x 10 to the 5th/cu cm at 0200 LST at mid-latitudes in the winter hemisphere.

Engebretson, M. J.↗

Helical screw expander evaluation project

A one MW helical rotary screw expander power system for electric power generation from geothermal brine was evaluated. The technology explored in the testing is simple, potentially very efficient, and ideally suited to wellhead installations in moderate to high enthalpy, liquid dominated field. A functional one MW geothermal electric power plant that featured a helical screw expander was produced and then tested with a demonstrated average performance of approximately 45% machine efficiency over a wide range of test conditions in noncondensing, operation on two-phase geothermal fluids. The Project also produced a computer equipped data system, an instrumentation and control van, and a 1000 kW variable load bank, all integrated into a test array designed for operation at a variety of remote test sites. Data are presented for the Utah testing and for the noncondensing phases of the testing in Mexico. Test time logged was 437 hours during the Utah tests and 1101 hours during the Mexico tests.

Mckay, R.↗

Flight worthy infrared bolometers with high throughput and low NEP

This paper describes the features of flight-worthy IR bolometers that were developed to meet the requirements of the Far Infrared Absolute Spectrometer (FIRAS) and the Diffuse Infrared Background Experiment (DIRBE) on the Cosmic Background Explorer of a short time constant, high throughput, and low noise equivalent power (NEP). The new bolometers use small chips of doped and compensated silicon as sensing elements, and diamond wafers coated with thin layers of Cr and Au as the absorbing substrate. The throughput values for the FIRAS bolometers and for DIRBE are 1.28 sr-sq cm, and 0.21 sr-sq cm, respectively. At 1.6, the time constants range from 3 to 40 ms, and their NEP range from 4 x 10 to the -15th to 1 x 10 to the -14th W/sq rt of Hz.

Serlemitsos, Aristides T.↗

Remotely sensed indicators of habitat heterogeneity and biological diversity: A preliminary report

The relationship between habitat area, spatial dynamics of the landscape, and species diversity is an important theme in population and conservation biology. Of particular interest is how populations of various species are affected by increasing habitat edges due to fragmentation. Over the last decade, assumptions regarding the effects of habitat edges on biodiversity have fluctuated wildly, from the belief that they have a positive effect to the belief that they have a clearly negative effect. This change in viewpoint has been brought about by an increasing recognition of the importance of geographic scale and a reinterpretation of natural history observations. In this preliminary report from an ongoing project, we explore the use of remote sensing technology and geographic information systems to further our understanding of how species diversity and population density are affected by habitat heterogeneity and landscape composition. A primary feature of this study is the investigation of SAR for making more rigorous investigations of habitat structure by exploiting the interaction between radar backscatter and vegetation structure and biomass. A major emphasis will be on the use of SAR data to define relative structural types based on measures of structural consolidation using the vegetation surface area to volume ratio (SA/V). Past research has shown that SAR may be sensitive to this form of structural expression which may affect biodiversity.

Imhoff, Marc↗

Searching for Radial Velocity Variations in eta Carinae

A hot companion of eta Carinae has been detected using high resolution spectra (905 - 1180 A) obtained with the Far Ultraviolet Spectroscopic Explorer (FUSE) satellite (see poster by Sonneborn et al.). Analysis of the far-UV spectrum shows that eta Car B is a luminous hot star. The N II 1084-86 emission feature indicates that the star may be nitrogen rich. The FUV continuum and the S IV 1073 P-Cygni wind line suggest that the effective temperature of eta Car B is at least 25,000 K. FUV spectra of eta Carinae were obtained with the FUSE satellite at 9 epochs between 2000 February and 2005 July. The data consists of 12 observations taken with the LWRS aperture (30x30 arcsec), three with the HIRS aperture (1.25x20 arcsec), and one MRDS aperture (4x20 arcsec). In this paper we discuss the analysis of these spectra to search for radial velocity variations associated with the 5.54-year binary orbit of Eta Car AB.

Iping, R. C.↗

Parallel, Gradient-Based Anisotropic Mesh Adaptation for Re-entry Vehicle Configurations

Two gradient-based adaptation methodologies have been implemented into the Fun3d refine GridEx infrastructure. A spring-analogy adaptation which provides for nodal movement to cluster mesh nodes in the vicinity of strong shocks has been extended for general use within Fun3d, and is demonstrated for a 70 sphere cone at Mach 2. A more general feature-based adaptation metric has been developed for use with the adaptation mechanics available in Fun3d, and is applicable to any unstructured, tetrahedral, flow solver. The basic functionality of general adaptation is explored through a case of flow over the forebody of a 70 sphere cone at Mach 6. A practical application of Mach 10 flow over an Apollo capsule, computed with the Felisa flow solver, is given to compare the adaptive mesh refinement with uniform mesh refinement. The examples of the paper demonstrate that the gradient-based adaptation capability as implemented can give an improvement in solution quality.

Bibb, Karen L.↗

Mars Exploration Rover: thermal design is a system engineering activity

The Mars Exploration Rovers (MER), were launched in June and July of 2003, repsectively and successfully landed on Mars in early and late January of 2004, repectively. The flight system architecture implemented many successful features of the Mars Pathfinder (MPF) system: A cruise stage that transported an entry vehicle that housed the Lander, which in turn, used airbags to cushion the Rover during the landing event.

lessons learned↗

NASA's Lunar Robotic Program

Before returning humans to the Moon for mankind s seventh lunar landing, NASA will embark upon a series of robotic missions with International partnership, executed within the construct of an integrated program, designed specifically to prepare the way for this further human exploration. The Lunar Precursors Robotic Exploration Program (LPRP) will acquire knowledge about the moon and its environment, as well as to develop operational experience and infrastructure, all needed to bring about sustained human exploration in the lunar environment. This paper presents an overview of the program in its early stages, a review of the currently planned missions, highlights of several of the program s important features and objectives, and a discussion of the challenges faced as we move forward to prepare for a return of people to the Moon.

McGrath, Melissa A.↗

An Overview of Communications Technology and Development Efforts for 2015 SBIR Phase I

This report highlights innovative SBIR 2015 Phase I projects specifically addressing areas in Communications Technology and Development which is one of six core competencies at NASA Glenn Research Center. There are fifteen technologies featured with emphasis on a wide spectrum of applications such as novel solid state lasers for space-based water vapor dial; wide temperature, high voltage and energy density capacitors for aerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser for methane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites; a SIC-based microcontroller for high-temperature in-situ instruments and systems; improved yield, performance and reliability of high-actuator-count deformable mirrors; embedded multifunctional optical sensor system; switching electronics for space-based telescopes with advanced AO systems; integrated miniature DBR laser module for Lidar instruments; and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. space-based water vapor dial; wide temperature, high voltage and energy density capacitors foraerospace exploration; instrument for airborne measurement of carbonyl sulfide; high-power tunable seed laser formethane Lidar transmitter; ROC-rib deployable ka-band antenna for nanosatellites.

space-based water vapor dial; wide temperature↗

Optical Diagnostic Imaging of Multi-Rocket Plume-Induced Base Flow Environments

Non-intrusive optical diagnostic imaging was used for the first time to visualize multi-rocket plume-induced reacting base flows to simulate launch vehicle ascent from sea-level to 250,000 ft. In particular, planar laser induced florescence (PLIF) and infrared (IR) imaging were implemented for the first time to visualize and quantify base flow and rocket plume environments from sub-scale, short-duration propulsion models within a shock tunnel facility. This report discusses the successful imaging diagnostic methods for capturing base flow features and dynamics as a function of altitude. Important base flow and plume features were captured with PLIF and IR diagnostics to develop a conceptual base flow physics model. This imaging data specifically provides insight into the Space Launch System vehicle core-stage and Exploration Upper Stage base environments and further validates short-duration ground test techniques and computational modeling.

Mehta, Manish↗

An estimation algorithm for vision-based exploration of small bodies in space

This paper summarizes a methodology for designing on-board state estimators in support of spacecraft exploration of small bodies such as asteroids and comets. This paper will focus on an estimation algorithm that incorporates two basic computer-vision measurement types: a Landmark Table and a Paired Feature Table. Several innovations are developed to incorporate these measurement types into the onboard state estimation algorithm. Simulations are provided to demonstrate the feasibility of the approach.

Brugarolas, Paul B.↗

xPLSS Structural Backplate Design, Manufacture, and Test Overview

NASA Johnson Space Center (JSC) has been developing and building a new detailed design of the Exploration Extravehicular Mobility Unit (xEMU) space suit to support future International Space Station (ISS) and Lunar Artemis missions. The Exploration Portable Life Support System (xPLSS) of the xEMU contains some clever new technologies to meet the requirements to provide Extra Vehicular Activity (EVA) capability on the ISS and the Moon. The suit must interface with and fit through ports and airlocks of at least three vehicles: ISS, Human Landing System (HLS), and Gateway. The first partial xPLSS experimental flight unit called SWME EXPRESS Rack Flight Experiment (SERFE) that was a rack-deployed thermal control system payload on the ISS for two years (2020-2022). The first complete assembly of the xEMU was built as a Design Verification Test (DVT) unit (2022); similar to but more extensive than an Engineering Development Unit (EDU). The xPLSS Backplate serves not only as the structural backbone of the xPLSS and SERFE systems but also contains innovative design features to reduce the: mass, complexity, parts count, number ofseals (and therefore leak potential), and outer dimensions of the entire assembly. This paper provides an overview of these new design features, manufacturing processes, system interfaces, and SERFE/DVT test results of the Backplate as part of the xPLSS/xEMU.

xPLSS↗

A statistical study of the subauroral electron temperature enhancement using dynamics Explorer 2 Langmuir probe observations

A statistical study of the subauroral electron temperature enhancement was undertaken using Langmuir probe observations during 488 traversals of the midlatitude plasmapause region by the DE-2 satellite. The subauroral electron temperature enhancement on the nightside is a quasi-permanent feature at all altitudes between 350 and 1000 km with an occurrence frequency that depends on altitude. The occurrence frequency of the subauroral electron temperature peak has a strong altitude dependence on the dayside. The position of the subauroral Te peak decreases with increasing magnetic activity in a manner similar to that of the equatorial plasmapause and other midlatitude plasmapause signatures.

Kozyra, J. U.↗

What is the Value of Space Exploration? A Prairie Perspective

Within the span of a single generation the purpose, form and mission of the United States civil space program has changed radically. Demonstrating technological superiority through a lunar landing has given way to an, as yet unclear agenda. Although hazy, the rough features of a 21st century program are discernable: it must be cost effective; economically, as well as, politically driven; and, international. Less clear are the missions. Will they include human habitation of cislunar space and the solar system? Earth observations? Planetary discovery? A Mars settlement? Perhaps, some of each? And if so, in what balance?

Source record↗

Austere Human Missions to Mars

The Design Reference Architecture 5 (DRA 5) is the most recent concept developed by NASA to send humans to Mars in the 2030 time frame using Constellation Program elements. DRA 5 is optimized to meet a specific set of requirements that would provide for a robust exploration program to deliver a new six-person crew at each biennial Mars opportunity and provide for power and infrastructure to maintain a highly capable continuing human presence on Mars. This paper examines an alternate architecture that is scaled back from DRA 5 and might offer lower development cost, lower flight cost, and lower development risk. It is recognized that a mission set using this approach would not meet all the current Constellation Mars mission requirements; however, this 'austere' architecture may represent a minimum mission set that would be acceptable from a science and exploration standpoint. The austere approach is driven by a philosophy of minimizing high risk or high cost technology development and maximizing development and production commonality in order to achieve a program that could be sustained in a flat-funded budget environment. Key features that would enable a lower technology implementation are as follows: using a blunt-body entry vehicle having no deployable decelerators, utilizing aerobraking rather than aerocapture for placing the crewed element into low Mars orbit, avoiding the use of liquid hydrogen with its low temperature and large volume issues, using standard bipropellant propulsion for the landers and ascent vehicle, and using radioisotope surface power systems rather than a nuclear reactor or large area deployable solar arrays. Flat funding within the expected NASA budget for a sustained program could be facilitated by alternating cargo and crew launches for the biennial Mars opportunities. This would result in two assembled vehicles leaving Earth orbit for Mars per Mars opportunity. The first opportunity would send two cargo landers to the Mars surface to preposition a habitat, supplies, and exploration equipment. The next opportunity, two years later, would send to Mars orbit 1) a lander with a Mars Ascent Vehicle (MAV) and 2) a crewed Mars Transit Habitat with an Orion CEV for Earth return. The following opportunity, two years after the first crew, would go back to cargo-only launches. This alternation of cargo and crew opportunities results in a sustainable launch rate of six Ares V launches every two years. It is notable that four of the six launches per Mars opportunity are identical, build-to-print, Tran-Mars Injection stages. This type of production rate could lend itself well to a COTStype service provider, and would make it feasible to have a live spare in place in the event of a single launch failure.

landers↗

Topographic Evidence for Eruptive Style Changes and Magma Evolution of Small Plains-style Volcanoes on Earth and Mars

Topographic profiles and surface characteristics of small (5 - 25 km diameter) plains-style shield volcanoes on the eastern Snake River Plain (ESRP) provide a method to evaluate eruptive processes and magmatic evolution on Martian volcanic plains. The ESRP is an ideal place to observe Mars-like volcanic features where hundreds of small monogenetic basaltic shields dominate the volcanic-sedimentary depositional sequence, and numerous planetary analogues are evident: coalescent mafic shields, hydromagmatic explosive eruptions, the interaction of lava flows with surficial water and glacial ice, and abundant eolian sand and loess. Single flows cannot be correlated over great distances, and are spatially restricted. These relations are useful for planetary exploration when inferring volcanic evolutionary patterns in lava plains represented by numerous eruptive vents. High spatial resolution imagery and digital topographic data for Mars from MOC, MOLA, and THEMIS is allowing for improvements in the level of detail of stratigraphic mapping of fields of small (< 25 km in diameter) volcanoes as well as studies of the morphological characteristics of individual volcanoes. In order to compare Mars and Earth volcanic features, elevation data from U.S.G.S. 10-meter digital elevation models (DEMs) and high-precision GPS field measurements are used in this study to generate approx. 20m spacing topographic profiles from which slope and surface morphology can be extracted. Average ESRP flank and crater slopes are calculated using 100 - 200 m spacing for optimum comparison to MOLA data, and to reduce the effects of surface irregularities.

Hughes, S. S.↗

On-orbit attitude control of the Cosmic Background Explorer (COBE)

The way in which COBE (launched by the SS in late 1982) performs its attitude control is described, along with the design of its on-orbit system. COBE, to be situated in a 900 km high, sun-synchronous orbit, contains two unique control features: (1) the orientation of the spinning satellite is controlled to a sun-normal attitude in the sun/local vertical plane; and (2) pitch and roll control is maintained by a unique triaxial arrangement of reaction wheels, magnetic torque bars and sensors, located in the body's tranverse plane. Inherent in this triaxial configuration concept is a built-in redundancy that will maintain attitude control in the event of any single-point sensor/actuator component failure. Each of the three control drive electronics operates independently and directly of a system of dedicated sensors. This system functions independently of a computer or an ephemeris communication link, leading to greater reliability.

Bramberg, B.↗