Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

EUV emission from a sample of Active Galactic Nuclei

Active Galactic Nuclei (AGN) emit a substantial fraction of their total radiated power in the EUV passband, because spectroscopically this band is situated at or near the peak of the 'big blue bump,' which is bounded on either side by the UV and soft X-ray excesses. Owing to the lack of observational data, the shape of AGN spectra in the EUV is not well known. This paper presents broad band (65-190 eV) count rates of 11 AGN detected by the Extreme Ultraviolet Explorer (EUVE). Assuming a power law spectral shape for the EUV and soft X-ray energies, we demonstrate that the photon indices of the sources are considerably steeper than typical AGN indices. For 6 sources where ROSAT data are available to provide a more precise determination of their spectral parameters in the 0.1-2.5 keV range, we have used these parameters to compute predicted EUVE count rates and compared them with the observed values. The two sets of quantities agree to within experimental error. We conclude that there is no evidence of spectral steepening or turn-over of the soft X-ray excess at EUV wavelengths for a sample of AGN which covers a wide range of brightness.

Lieu, R.↗
DOE OSTI2020

Deterministic incident-wave elevation prediction in intermediate water depth

Potential performance gains from optimal (non-causal) impedance-matching control of wave energy devices in irregular ocean waves are dependent on deterministic wave elevation prediction techniques that work well in practical applications. Although a number of devices are designed for operation in intermediate water depths, little work has been reported on deterministic wave prediction in such depths. Here, we investigated a deterministic wave-prediction technique based on an approximate propagation model that leads to an analytical formulation, which may be convenient to implement in practice. To improve accuracy, an approach to combine predictions based on multiple up-wave measurement points is evaluated. The overall method is tested using experimental time-series measurements recorded in the U.S. Navy MASK basin in Carderock, MD, USA. For comparison, an alternative prediction approach based on Fourier coefficients is also tested with the same data. Comparison of prediction approaches with direct measurements suggest room for improvement. Possible sources of error including tank reflections are estimated, and potential mitigation approaches are discussed.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Machine learning of high dimensional data on a noisy quantum processor

Abstract Quantum kernel methods show promise for accelerating data analysis by efficiently learning relationships between input data points that have been encoded into an exponentially large Hilbert space. While this technique has been used successfully in small-scale experiments on synthetic datasets, the practical challenges of scaling to large circuits on noisy hardware have not been thoroughly addressed. Here, we present our findings from experimentally implementing a quantum kernel classifier on real high-dimensional data taken from the domain of cosmology using Google’s universal quantum processor, Sycamore. We construct a circuit ansatz that preserves kernel magnitudes that typically otherwise vanish due to an exponentially growing Hilbert space, and implement error mitigation specific to the task of computing quantum kernels on near-term hardware. Our experiment utilizes 17 qubits to classify uncompressed 67 dimensional data resulting in classification accuracy on a test set that is comparable to noiseless simulation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Digital autofocusing of a coded-aperture Laue diffraction microscope

To provide optimal depth resolution with a coded-aperture Laue diffraction microscope, an accurate position of the coded-aperture and its scanning geometry need to be known. However, finding the geometry by trial and error is a time-consuming and often challenging process because of the large number of parameters involved. In this paper, we propose an optimization approach to automate the focusing process after data is collected. Here we demonstrate the robustness and efficiency of the proposed approach with experimental data taken at a synchrotron facility.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Predicting secondary organic aerosol phase state and viscosity and its effect on multiphase chemistry in a regional-scale air quality model

Atmospheric aerosols are a significant public health hazard and have substantial impacts on the climate. Secondary organic aerosols (SOAs) have been shown to phase separate into a highly viscous organic outer layer surrounding an aqueous core. This phase separation can decrease the partitioning of semi-volatile and low-volatile species to the organic phase and alter the extent of acid-catalyzed reactions in the aqueous core. A new algorithm that can determine SOA phase separation based on their glass transition temperature (T g ), oxygen to carbon (O:C) ratio and organic mass to sulfate ratio, and meteorological conditions was implemented into the Community Multiscale Air Quality Modeling (CMAQ) system version 5.2.1 and was used to simulate the conditions in the continental United States for the summer of 2013. SOA formed at the ground/surface level was predicted to be phase separated with core–shell morphology, i.e., aqueous inorganic core surrounded by organic coating 65.4 % of the time during the 2013 Southern Oxidant and Aerosol Study (SOAS) on average in the isoprene-rich southeastern United States. Our estimate is in proximity to the previously reported ~70 % in literature. The phase states of organic coatings switched between semi-solid and liquid states, depending on the environmental conditions. The semi-solid shell occurring with lower aerosol liquid water content (western United States and at higher altitudes) has a viscosity that was predicted to be 10 2 –10 12 Pa s, which resulted in organic mass being decreased due to diffusion limitation. Organic aerosol was primarily liquid where aerosol liquid water was dominant (eastern United States and at the surface), with a viscosity <10 2 Pa s. Phase separation while in a liquid phase state, i.e., liquid–liquid phase separation (LLPS), also reduces reactive uptake rates relative to homogeneous internally mixed liquid morphology but was lower than aerosols with a thick viscous organic shell. The sensitivity cases performed with different phase-separation parameterization and dissolution rate of isoprene epoxydiol (IEPOX) into the particle phase in CMAQ can have varying impact on fine particulate matter (PM 2.5 ) organic mass, in terms of bias and error compared to field data collected during the 2013 SOAS. This highlights the need to better constrain the parameters that govern phase state and morphology of SOA, as well as expand mechanistic representation of multiphase chemistry for non-IEPOX SOA formation in models aided by novel experimental insights.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1979

Analysis of misalignment in the tension test

Many experimenters fail to appreciate the significance of test system alignment during a tensile test. Poor alignment can increase data scatter and significantly influence some of the test results. In this paper a comprehensive analytical study of the misalignment problem in the plastic strain range is presented and errors caused by misalignment estimated. The results show that the stress-strain curve is not significantly affected by misalignment. However, the strains at the outermost fibers of the specimen cross-section are strongly affected by misalignment. Therefore, the effect of misalignment is most important when properties sensitive to local strain concentrations are being investigated.

Wu, H. C.↗
NASA NTRS1982

Spectrum of the microwave background radiation

A review is given of the present status of measurements of the spectrum of the microwave background. Factors that limit experimental accuracy are discussed with particular reference to high-frequency measurements. A selection of the available measurements yields a data set that is reasonably consistent with the black-body spectrum for a temperature of 2.9 K. A simple statistical analysis suggests either that there are errors in the data set, or that deviations from a black-body spectrum exist. The difficulties inherent in properly averaging the results from different observers are described. Prospects for improved measurements are summarized.

Richards, P. L.↗
NASA NTRS1991

Extension of and improvements to the ERDC low frequency magnetic direction finding system

In 1985, a three station direction finding lightning location system was established in the United Kingdom. A description of its evolution from an experimental system to a five station commercial system providing both on-line and historical location information is presented. A method of error reduction which enables simultaneous optimization of strike location and calculation of aerial twist error is described, together with results of the analysis of four station data from 1989. It is demonstrated that one station with a twist error can produce an apparent bearing dependent error in a station without errors. Application of the bearing corrections has significantly improved the accuracy of the system. Average location errors of better that 1 km can be achieved at a distance of 200 km from the stations.

Lees, M. I.↗
NASA NTRS1983

Transient responses of phosphoric acid fuel cell power plant system

An analytical and computerized study of the steady state and transient response of a phosphoric acid fuel cell (PAFC) system was completed. Parametric studies and sensitivity analyses of the PAFC system's operation were accomplished. Four non-linear dynamic models of the fuel cell stack, reformer, shift converters, and heat exchangers were developed based on nonhomogeneous non-linear partial differential equations, which include the material, component, energy balance, and electrochemical kinetic features. Due to a lack of experimental data for the dynamic response of the components only the steady state results were compared with data from other sources, indicating reasonably good agreement. A steady state simulation of the entire system was developed using, nonlinear ordinary differential equations. The finite difference method and trial-and-error procedures were used to obtain a solution. Using the model, a PAFC system, that was developed under NASA Grant, NCC3-17, was improved through the optimization of the heat exchanger network. Three types of cooling configurations for cell plates were evaluated to obtain the best current density and temperature distributions. The steady state solutions were used as the initial conditions in the dynamic model. The transient response of a simplified PAFC system, which included all of the major components, subjected to a load change was obtained. Due to the length of the computation time for the transient response calculations, analysis on a real-time computer was not possible. A simulation of the real-time calculations was developed on a batch type computer. The transient response characteristics are needed for the optimization of the design and control of the whole PAFC system. All of the models, procedures and simulations were programmed in Fortran and run on IBM 370 computers at Cleveland State University and the NASA Lewis Research Center.

Lu, Cheng-Yi↗
NASA NTRS1997

Experimental Assessment and Enhancement of Planar Laser-Induced Fluorescence Measurements of Nitric Oxide in an Inverse Diffusion Flame

We have experimentally assessed the quantitative nature of planar laser-induced fluorescence (PLIF) measurements of NO concentration in a unique atmospheric pressure, laminar, axial inverse diffusion flame (IDF). The PLIF measurements were assessed relative to a two-dimensional array of separate laser saturated fluorescence (LSF) measurements. We demonstrated and evaluated several experimentally-based procedures for enhancing the quantitative nature of PLIF concentration images. Because these experimentally-based PLIF correction schemes require only the ability to make PLIF and LSF measurements, they produce a more broadly applicable PLIF diagnostic compared to numerically-based correction schemes. We experimentally assessed the influence of interferences on both narrow-band and broad-band fluorescence measurements at atmospheric and high pressures. Optimum excitation and detection schemes were determined for the LSF and PLIF measurements. Single-input and multiple-input, experimentally-based PLIF enhancement procedures were developed for application in test environments with both negligible and significant quench-dependent error gradients. Each experimentally-based procedure provides an enhancement of approximately 50% in the quantitative nature of the PLIF measurements, and results in concentration images nominally as quantitative as LSF point measurements. These correction procedures can be applied to other species, including radicals, for which no experimental data are available from which to implement numerically-based PLIF enhancement procedures.

Partridge, William P.↗
NASA NTRS2012

Development of a Dual-Pump CARS System for Measurements in a Supersonic Combusting Free Jet

This work describes the development of a dual-pump CARS system for simultaneous measurements of temperature and absolute mole fraction of N2, O2 and H2 in a laboratory scale supersonic combusting free jet. Changes to the experimental set-up and the data analysis to improve the quality of the measurements in this turbulent, high-temperature reacting flow are described. The accuracy and precision of the instrument have been determined using data collected in a Hencken burner flame. For temperature above 800 K, errors in absolute mole fraction are within 1.5, 0.5, and 1% of the total composition for N2, O2 and H2, respectively. Estimated standard deviations based on 500 single shots are between 10 and 65 K for the temperature, between 0.5 and 1.7% of the total composition for O2, and between 1.5 and 3.4% for N2. The standard deviation of H2 is ~10% of the average measured mole fraction. Results obtained in the jet with and without combustion are illustrated, and the capabilities and limitations of the dual-pump CARS instrument discussed.

Magnotti, Gaetano↗
NASA NTRS2001

Updated Electronic Testbed System

As we continue to advance in exploring space frontiers, technology must also advance. The need for faster data recovery and data processing is crucial. In this, the less equipment used, and lighter that equipment is, the better. Because integrated circuits become more sensitive in high altitude, experimental verification and quantification is required. The Center for Applied Radiation Research (CARR) at Prairie View A&M University was awarded a grant by NASA to participate in the NASA ER-2 Flight Program, the APEX balloon flight program, and the Student Launch Program. These programs are to test anomalous errors in integrated circuits due to single event effects (SEE). CARR had already begun experiments characterizing the SEE behavior of high speed and high density SRAM's. The research center built a error testing system using a PC-104 computer unit, an Iomega Zip drive for storage, a test board with the components under test, and a latchup detection and reset unit. A test program was written to continuously monitor a stored data pattern in the SRAM chip and record errors. The devices under test were eight 4Mbit memory chips totaling 4Mbytes of memory. CARR was successful at obtaining data using the Electronic TestBed System (EBS) in various NASA ER-2 test flights. These series of high altitude flights of up to 70,000 feet, were effective at yielding the conditions which single event effects usually occur. However, the data received from the series of flights indicated one error per twenty-four hours. Because flight test time is very expensive, the initial design proved not to be cost effective. The need for orders of magnitude with more memory became essential. Therefore, a project which could test more memory within a given time was created. The goal of this project was not only to test more memory within a given time, but also to have a system with a faster processing speed, and which used less peripherals. This paper will describe procedures used to build an updated Electronic Testbed System.

Brewer, Kevin L.↗
DOE OSTI2023

Nuclear Criticality Safety Integral Experiment Covariance Determination

Integral benchmarks for criticality safety and nuclear data validation require expensive uncertainty quantification studies. Commonly, the uncertainty quantification ignores correlations between experiments that share components. Experiments such as the TEX (Thermal/Epithermal eXperiments) campaigns consist of many shared parts between experiments, such as fuel, which creates a strong correlation in their errors. While these correlations are known to exist, they are often not estimated due to the complexity of such calculations. This paper describes a software package that uses an intuitive method of determining the covariance for each of the experimental components, providing a correlation matrix for each family of parts across the multiple cases examined within a benchmark. The code uses the TEX-HEU campaign as a proof of concept, and we show that the correlations can be calculated with information commonly found in ICSBEP (International Criticality Safety Benchmark Evaluation Project) benchmarks. The estimated covariances are used in χ 2 trending studies to evaluate their impact on nuclear data validation. The covariance determination code can be easily integrated into current benchmark evaluations as well as reevaluating legacy benchmark uncertainties. Uncertainty correlation calculations should become the baseline for criticality safety integral experiment benchmarks and can now be easily calculated with the described software package.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Temperature dependence of magnetic anisotropy and magnetoelasticity from classical spin-lattice calculations

Here we present a classical molecular-spin dynamics (MSD) methodology that enables accurate computations of the temperature dependence of the magnetocrystalline anisotropy as well as magnetoelastic properties of magnetic materials. The nonmagnetic interactions are accounted for by a spectral neighbor analysis potential (SNAP) machine-learned interatomic potential, whereas the magnetoelastic contributions are accounted for using a combination of an extended Heisenberg Hamiltonian and a Néel pair interaction model, representing both the exchange interaction and spin-orbit-coupling effects, respectively. All magnetoelastic potential components are parameterized using a combination of first-principles and experimental data. Our framework is applied to the α phase of iron. Initial testing of our MSD model is done using a 0 K parametrization of the Néel interaction model. After this, we examine how individual Néel parameters impact the $B$ 1 and $B$ 2 magnetostrictive coefficients using a moment-independent δ sensitivity analysis. The results from this study are then used to initialize a genetic algorithm optimization which explores the Néel parameter phase space and tries to minimize the error in the B 1 and B 2 magnetostrictive coefficients in the range of 0–1200 K. Our results show that while both the 0 K and genetic algorithm optimized parametrization provide good experimental agreement for $B$ 1 and $B$ 2 , only the genetic algorithm optimized results can capture the second peak in the $B$ 1 magnetostrictive coefficient which occurs near approximately 800 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Coexistent quantum channel characterization using quantum process tomography with spectrally resolved detection

The coexistence of classical and quantum signals over the same optical fiber is critical for quantum networks operating within the existing communications infrastructure. Here, we characterize the quantum channel that results from distributing approximate single-photon polarization-encoded qubits simultaneously with classical light of varying intensities through a 25 km fiber-optic channel. We use spectrally resolved quantum process tomography with a newly developed Bayesian reconstruction method to estimate the quantum channel from experimental data, both with and without classical noise. Furthermore, we show that the coexistent fiber-based quantum channel has high process fidelity with an ideal depolarizing channel if the noise is dominated by Raman scattering. These results aid future development of quantum repeater designs and quantum error-correcting codes which benefit from realistic channel error models.

Chapman, Joseph↗
DOE OSTI2025

The GREEN ‘omics of Nutrient Feedbacks to Soil Warming

The GREEN ‘omics of Nutrient Feedbacks in Soil project advanced the DOE Biological and Environmental Research (BER) mission by developing and applying isotope-enabled ’omics tools to understand how soil microbes regulate carbon and nutrient cycling. Guided by the Growth Rate, growth Efficiency, and stoichiometry of Essential Nutrients (GREEN ’omics) framework, the project aimed to build a predictive, systems-level understanding of microbial traits that control ecosystem biogeochemistry. In a collaboration among Northern Arizona University (lead), West Virginia University, Lawrence Livermore National Laboratory, and Pacific Northwest National Laboratory, we combined quantitative stable isotope probing (qSIP), Chip-SIP, NanoSIMS, and genome-resolved metagenomics across long-term experiments in Arctic, boreal, temperate, and tropical ecosystems. The project produced three key outcomes: 1) We showed that community-weighted temperature sensitivities of bacterial growth (Q10) can predict ecosystem-scale soil respiration responses across diverse soils. 2) We provided the first in situ evidence for density-dependent population dynamics in soil bacteria and demonstrated that nutrient additions intensify competition, concentrating carbon use into fewer taxa. 3) We improved and extended isotope-enabled ’omics methods by quantifying qSIP measurement error to guide experimental design and coupling SIP with genome-resolved metagenomics to reveal cross-kingdom interactions among bacteria, fungi, and viruses. Together, these results show that a small number of microbial traits and taxa exert disproportionate control over soil carbon and nutrient cycling, providing critical data and methods to improve representation of microbial processes in Earth system models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Dynamic analysis of multimesh-gear helicopter transmissions

A dynamic analysis of multimesh-gear helicopter transmission systems was performed by correlating analytical simulations with experimental investigations. The two computer programs used in this study, GRDYNMLT and PGT, were developed under NASA/Army sponsorship. Parametric studies of the numerical model with variations on mesh damping ratios, operating speeds, tip-relief tooth modifications, and tooth-spacing errors were performed to investigate the accuracy, application, and limitations of the two computer programs. Although similar levels of dynamic loading were predicted by both programs, the computer code GRDYNMLT was found to be superior and broader in scope. Results from analytical work were also compared with experimental data obtained from the U.S. Army's UH-60A Black Hawk 2240-kW (3000-hp) class, twin-engine helicopter transmission tested at the NASA Lewis Research Center. Good correlation in gear stresses was obtained between the analytical model simulated by GRDYNMLT and the experimental measurements. More realistic mesh damping can be predicted through experimental data correlation.

Choy, Fred K.↗
NASA NTRS1993

An efficient nonlinear relaxation technique for the three-dimensional, Reynolds-averaged Navier-Stokes equations

An efficient implicit method for the computation of steady, three-dimensional, compressible Navier-Stokes flowfields is presented. A nonlinear iteration strategy based on planar Gauss-Seidel sweeps is used to drive the solution toward a steady state, with approximate factorization errors within a crossflow plane reduced by the application of a quasi-Newton technique. A hybrid discretization approach is employed, with flux-vector splitting utilized in the streamwise direction and central differences with artificial dissipation used for the transverse fluxes. Convergence histories and comparisons with experimental data are presented for several 3-D shock-boundary layer interactions. Both laminar and turbulent cases are considered, with turbulent closure provided by a modification of the Baldwin-Barth one-equation model. For the problems considered (175,000-325,000 mesh points), the algorithm provides steady-state convergence in 900-2000 CPU seconds on a single processor of a Cray Y-MP.

Edwards, Jack R.↗