Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Simulations of electron beam excited modes in the high-altitude magnetosphere

Excitation of waves by electron distributions consisting of hot, beam, and cold populations is investigated theoretically and with the help of particle simulations. The main modes excited include the upper hybrid oscillation for nearly perpendicular propagation; the whistler mode at oblique angles, which becomes the plasma two-stream oscillation for parallel propagation; and the electron acoustic mode for nearly parallel propagation. The whistler mode, excited by thermal fluctuation enhancement, has a broad range of wave numbers and quasi-linearly decreases the beam slope, while the electron acoustic mode, which is linearly unstable, has a narrow spread in phase velocities and traps the beam and the warm electrons forming a double humped distribution. Both modes contribute to forming a tail in the cold electron distribution. The resulting wave spectrum is discussed in the context of DE 1 observations.

Roth, I.↗
NASA NTRS1980

Power distribution for electron beam welding

The power distribution of an electron seam is analyzed. Digital computer techniques are used to evaluate the radial distribution of power detected by a wire probe circulating through the beam. Results are reported.

Edwards, E.↗
DOE OSTI2025

Charges on a suspended silicon nitride membrane under a high-energy electron beam

Thin silicon nitride (SiN x ) membranes are widely used in gas and liquid phase transmission electron microscopy (TEM) and as phase plates to enhance imaging contrast. SiN x contains trap sites for both positive and negative charges, which can be manipulated by high-energy electron irradiation, external potential biasing, or light exposure. Charge accumulation on the membrane can significantly affect in situ TEM processes, including chemical and electrochemical reactions, nanoparticle dynamics, and catalytic activity, or introduce unwanted phase shifts when used as a phase plate. Here, in this study, charge accumulation on suspended SiN x membranes was investigated using off-axis electron holography combined with model-free charge analysis, supported by custom finite element analysis (FEA) simulations. An average residual positive charge density of approximately 2.8 × 10 −4 C m −2 was measured. Localized and stable regions of both positive and negative charges were identified on the membrane. The global positive and localized positive/negative charges give rise to strong electric fields and electroosmotic slip velocities at the membrane surface, which are sufficient to induce non-Brownian particle behavior and directional fluid flow, offering a physical explanation for previously observed anomalies in particle dynamics, nucleation, and growth during gas and liquid phase TEM experiments. These results provide a benchmark for understanding charge behavior at SiNx interfaces in gas and liquid phase TEM. Furthermore, the FEA simulations establish a framework for future investigations into charge distribution, electrostatic potentials, and electrical double layers at solid–liquid interfaces, particularly in complex geometries and chemically dynamic environments.

Suspended silicon↗
DOE OSTI2025

Experimental study of energy-dependent angular broadening of MeV electron beams for high-resolution imaging in thick samples

In scanning transmission electron microscopy (STEM), spatial resolution is primarily influenced by the projected size of the electron probe within the specimen. In thin samples, a large semi-convergence angle enables a tightly focused beam and sub-nanometer resolution. However, in thick specimens, resolution is fundamentally limited by transverse beam broadening from multiple large-angle scattering events—for example, a probe with 10 mrad angular divergence can broaden by ∼100 nm over a 10 μm path. Since this broadening scales inversely with beam energy, MeV-STEM offers a promising route for high-resolution imaging in thick materials. To quantitatively assess this effect, we performed high-precision measurements at UCLA’s PEGASUS beamline, characterizing beam divergence and intensity profiles for 3–8 MeV electrons transmitted through a wedged-silicon sample of varying thickness. Our results reconcile discrepancies among analytical models and validate Monte Carlo simulations. Here, we find that increasing beam energy from 3.0 to 5.8 MeV reduces angular broadening by a factor of 2.6, with diminishing returns observed at 7.6 MeV. These findings provide a quantitative framework for optimizing MeV-STEM parameters in high-resolution imaging of thick biological and microelectronic specimens, and for guiding beam energy selection in other advanced imaging modes beyond STEM.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Exploring electron beam induced atomic assembly via reinforcement learning in a molecular dynamics environment

We report atom-by-atom assembly of functional materials and devices is perceived as one of the ultimate targets of nanotechnology. Recently it has been shown that the beam of a scanning transmission electron microscope can be used for targeted manipulation of individual atoms. However, the process is highly dynamic in nature rendering control difficult. One possible solution is to instead train artificial agents to perform the atomic manipulation in an automated manner without need for human intervention. As a first step to realizing this goal, we explore how artificial agents can be trained for atomic manipulation in a simplified molecular dynamics environment of graphene with Si dopants, using reinforcement learning. We find that it is possible to engineer the reward function of the agent in such a way as to encourage formation of local clusters of dopants under different constraints. This study shows the potential for reinforcement learning in nanoscale fabrication, and crucially, that the dynamics learned by agents encode specific elements of important physics that can be learned.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1985

The energization of electrons and ions by electron beams injected in the ionosphere

This paper represents a continuation of an investigation of the nature and origin of the particle populations associated with an electron beam-emitting rocket experiment in the ionosphere. In this investigation, the intense flux of suprathermal electrons created around such a rocket has been studied by several groups. Arnoldy and Winckler (1981) have discussed the vehicle floating potential problem. The present paper is concerned with results which have been obtained from the Echo 4 and 5 experiments considered by Swanson (1983). Attention is given to instrumentation, suprathermal electrons, thermal ions, energetic ions, and ion resonances.

Arnoldy, R. L.↗
DOE OSTI2021

Effect of Electron Beam Oscillation Figures on Weld Surface Condition and Cross Sectional Morphology [Slides]

Overview - Problem: Preliminary experiments showed weld depth and surface condition are not consistent among different oscillation figures. Investigation: 1. Study the circle and concentric circle figures, and directional variants of these; 2. Measure the effect of frequency on the figure; 3. Produce beam figures of equal diameter; 4. Produce welds using equal diameter beam figures 5. Correlate weld depth, surface condition, and root defects with the beam figure.

42 ENGINEERING↗
NASA NTRS1975

Performance of 75-millimeter-bore bearings using electron-beam-welded hollow balls with a diameter ratio of 1.26

An experimental investigation was performed to determine the rolling element fatigue life of electron beam-welded hollow balls with a diameter ratio (o.d./i.d.) of 1.26 and to determine the operating characteristics of bearings using these hollow balls. Similar bearings with solid balls were also tested and the data compared. The bearings were operated at shaft speeds up to 28,000 rpm with a thrust load of 2200 N (500 lb). Ball failures during the bearing tests were due to flexure fatigue. The solid and hollow ball bearings tested showed little difference in outer race temperatures and indicated the same bearing torque. The 17.5-mm (0.6875-in.) diameter balls were also tested in the five-ball fatigue tester and showed no significant difference in life when compared with the life of a solid ball.

Coe, H. H.↗
DOE OSTI2020

Runaway electron beam dynamics at low plasma density in DIII-D: energy distribution, current profile, and internal instability

Parameters of the post-disruption runaway electron (RE) beam in the collisionless background plasma achieved after deuterium injection are investigated in DIII-D. The spatially resolved RE energy distribution function is measured for the first time during the RE plateau stage by inverting hard X-ray bremsstrahlung spectra. It has maximum energy up to 20 MeV and a non-monotonous feature at 5{6 MeV observed only in the core of the beam supporting the possibility of kinetic instabilities. The RE current profile is reconstructed for the first time using the spatially resolved RE energy distribution. It is found to be more peaked than the pre-disruption plasma current, with higher internal inductance, suggesting preferential formation of REs in the core plasma or potentially a radially inward motion of the REs. The accessed relatively low-current (180 kA) RE beam is found stable, likely due to its elevated q profile. From this base stable equilibrium, instability is accessed by ramping the solenoid current. Under a large applied accelerating loop voltage an internal kink mode is observed. The kink mode leads to sawtooth-like relaxation of the RE current profile, but drives no RE loss. Under conditions of a large decelerating voltage, chirping Alfvénic instabilities driven by REs during the RE plateau stage are observed for the first time. The low-frequency (0.1{7 MHz) Alfvénic instabilities, supposedly compressional Alfvén eigenmodes, are found to be correlated with a RE loss signal. Finally, this provides novel plasma conditions to study these instabilities and investigate opportunities to utilize them for RE control. Bifurcated electron cyclotron emission (ECE) spectrum is measured during the collisionless RE plateau, with a break point at ≈100 GHz suggesting resonant absorption of the ECE at low frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Electron beam sounding rocket experiments for probing the distant magnetosphere

Electron accelerators on sounding rockets have injected 8-40-keV electrons on closed magnetospheric tail field lines near 250 km altitude in the northern auroral zone. These beams mirrored at the southern conjugate point ad returned as 'echoes' which were detected on the rocket system. The 20 percent of the beam that returned was sufficient to measure field line lengths and verify magnetospheric magnetic models, to measure fluctuating electric fields, and electron pitch angle scattering (6-10) R(E) distant, and to identify 10-100 V field-aligned potentials above the rocket. The experiment gives new insight into the motion of natural electrons in the outer Van Allen radiation belt.

Nemzek, R. J.↗
DOE OSTI2021

Modulating Electron Beam–Sample Interactions in Imaging and Diffraction Modes by Dose Fractionation with Low Dose Rates

Abstract Technological opportunities are explored to enhance detection schemes in transmission electron microscopy (TEM) that build on the detection of single-electron scattering events across the typical spectrum of interdisciplinary applications. They range from imaging with high spatiotemporal resolution to diffraction experiments at the window to quantum mechanics, where the wave-particle dualism of single electrons is evident. At the ultimate detection limit, where isolated electrons are delivered to interact with solids, we find that the beam current dominates damage processes instead of the deposited electron charge, which can be exploited to modify electron beam-induced sample alterations. The results are explained by assuming that all electron scattering are inelastic and include phonon excitation that can hardly be distinguished from elastic electron scattering. Consequently, a coherence length and a related coherence time exist that reflect the interaction of the electron with the sample and change linearly with energy loss. Phonon excitations are of small energy (<100 meV), but they occur frequently and scale with beam current in the irradiated area, which is why we can detect their contribution to beam-induced sample alterations and damage.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Nanopatterned electron beams for temporal coherence and deterministic phase control of x-ray free-electron lasers

A method includes accelerating an electron bunch along a direction of propagation to a relativistic energy and partitioning the electron bunch by transmitting the electron bunch through a grating at the relativistic energy. The grating includes a plurality of alternating narrow portions and wide portions. The narrow portions have a first thickness in a direction substantially parallel to the direction of propagation of the electron bunch, and the wide portions have a second thickness in the direction substantially parallel to the direction of propagation of the electron bunch. The second thickness is greater than the first thickness. The method also includes generating a pulse of light using the partitioned electron bunch.

Graves, William↗