Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Transport and mechanical property evaluation of (AgSbTe){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87, 0.90)

(AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (known collectively by the acronym of their constituent elements as TAGS-x, where x designates the mole fraction of GeTe) materials, despite being described over 40 years ago, have only recently been studied in greater detail from a fundamental standpoint. We have prepared a series of samples with composition (AgSbTe{sub 2}){sub 1-x}(GeTe){sub x} (x=0.80, 0.82, 0.85, 0.87 and 0.90). Cast ingots of the above compositions were ground and consolidated by spark plasma sintering (SPS). Sintering conditions, specifically high applied pressures of 65 MPa and slow heating rates, were identified as important variables that lead to samples with low porosity and good mechanical strength. The resulting ingots were cut for high temperature electrical, thermal transport and mechanical property evaluation. TAGS-85 was found to have the highest ZT of all samples investigated (ZT=1.36 at 700 K) as a result of its very low value of thermal conductivity. Hall effect measurements performed from 5 to 300 K found these materials to have complex multi-band transport characteristics. - Graphical Abstract: Powder X-ray diffraction of TAGS-x (x=0.80, 0.82, 0.85, 0.87 and 0.90) showing characteristic bifurcation indicative of rhombohedral structure.

36 MATERIALS SCIENCE↗

Anisotropy of effective electron masses in highly doped nonpolar GaN

The anisotropic effective electron masses in wurtzite GaN are determined by generalized infrared spectroscopic ellipsometry. Nonpolar (112{sup ¯}0) oriented thin films allow accessing both effective masses, m{sub ⊥}{sup *} and m{sub ∥}{sup *}, by determining the screened plasma frequencies. A n-type doping range up to 1.7 × 10{sup 20} cm{sup −3} is investigated. The effective mass ratio m{sub ⊥}{sup *}/m{sub ∥}{sup *} is obtained with highest accuracy and is found to be 1.11 independent on electron concentration up to 1.2 × 10{sup 20} cm{sup −3}. For higher electron concentrations, the conduction band non-parabolicity is mirrored in changes. Absolute values for effective electron masses depend on additional input of carrier concentrations determined by Hall effect measurements. We obtain m{sub ⊥}{sup *}=(0.239±0.004)m{sub 0} and m{sub ∥}{sup *}=(0.216±0.003)m{sub 0} for the parabolic range of the GaN conduction band. Our data are indication of a parabolic GaN conduction band up to an energy of approximately 400 meV above the conduction band minimum.

36 MATERIALS SCIENCE↗

Composite binder, processing, and particle size effects on mechanical properties of non-hazardous high explosive surrogates

Plastic-bonded explosives (PBX) are polymer matrix composites that are highly loaded with micron-scale explosive crystals. The thermal and mechanical properties of these materials must be well-understood so that appropriate engineering models can be developed, but testing such properties under many scenarios can be hazardous and expensive. A non-hazardous PBX surrogate (“mock”) may be used in place of a PBX in many experiments if the thermomechanical properties are well-matched. Our previous research has shown that 5-iodo-2'-deoxyuridine (IDOX) is a promising crystalline filler material for the explosive cyclotetramethylene-tetranitramine (HMX). In this study, we investigate how the binder composition, variations in the IDOX particle size distribution, and pressing temperature affect the compressive strength and elastic modulus. We observe that while the binder system used in the composite dominates the mechanical response, the particle size distribution and pressing conditions do have a measurable effect on the material compliance and strength.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Fundamental Properties of O-Type Stars

We present a comprehensive analysis of high-resolution, far-ultraviolet HST STIS, FUSE, and optical spectra of 18 O stars in the Small Magellanic Cloud. Our analysis is based on the OSTAR2002 grid of NLTE metal-line-blanketed model atmospheres calculated with our code TLUSTY. We systematically explore and present the sensitivity of various UV and optical lines to different stellar parameters. We have obtained consistent fits of the UV and the optical spectrum to derive the effective temperature, surface gravity, surface composition, and microturbulent velocity of each star. Stellar radii, masses, and luminosities follow directly. For stars of the same spectral subtype, we find a general good agreement between effective temperature determinations obtained with TLUSTY, CMFGEN, and FASTWIND models, which are all lower than the standard T(sub eff) calibration of O stars. We propose a new calibration between the spectral type and effective temperature based on our results from UV metal lines, as well as optical hydrogen and helium lines. The lower effective temperatures translate into ionizing luminosities that are smaller by a factor of 3 compared to luminosities inferred from previous standard calibrations. The chemical composition analysis reveals that the surface of about 80% of the program stars is moderately to strongly enriched in nitrogen, while showing the original helium, carbon, and oxygen abundances. Our results support the new stellar evolution models that predict that the surface of fast rotating stars becomes nitrogen-rich during the main-sequence phase because of rotationally induced mixing. Enrichment factors are, however, larger than predicted by stellar evolution models. Most stars exhibit the "mass discrepancy" problem, which we interpret as a result of fast rotation that lowers the measured effective gravity. Nitrogen enrichment and low spectroscopic masses are therefore two manifestations of fast rotation. Our study thus emphasizes the importance of rotation in our understanding of the properties of massive stars and provides a framework for investigating populations of low-metallicity massive stars at low and high redshifts.

Heap, Sara R.↗

Grassland disturbance increases monarch butterfly oviposition and decreases arthropod predator abundance

Many species of conservation concern depend on disturbance to create or maintain suitable habitat. We evaluated effects of disturbance on the eastern migratory monarch butterfly (Danaus plexippus L.), which has declined markedly in recent decades, primarily attributed to the loss of milkweed host plants from annual crop fields in the US Midwest. Currently, remaining milkweeds in this region primarily occur in perennial grasslands, where disturbance is infrequent, predatory arthropods are abundant, and seasonal patterns of plant phenology differ from crop fields. In a two-year study in Michigan, USA, we applied three treatments to 23 patches of common milkweed (Asclepias syriaca L.); one-third of each patch was left undisturbed, while the remaining thirds were mowed in either mid-June or mid-July, respectively, and allowed to regenerate. We subsequently measured effects on monarch oviposition, predator abundance, survival of sentinel eggs and larvae, and tested how milkweed phenology and aphid colonization—both of which are reset by disturbance—structure predation risk for immature monarchs. Monarchs laid more eggs on regenerating versus undisturbed stems under both mowing regimes. Predators were strongly suppressed by mowing treatments, requiring 2–4 weeks to recolonize milkweed after disturbance, and were more abundant on flowering or aphid-infested stems. We found no significant differences in monarch egg/larval survival, although it tended to be higher in mowed plots. Overall, monarchs laid more eggs on regenerating stems where their offspring may also experience enemy-free space. Future work should focus on testing grassland disturbance as a management tool to improve productivity of existing monarch breeding habitat.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of two-dimensional bolus effect of immobilization/support devices on skin doses: A radiochromic EBT film dosimetry study in phantom

Purpose: In this study, the authors have quantified the two-dimensional (2D) perspective of skin dose increase using EBT film dosimetry in phantom in the presence of patient immobilization devices during conventional and IMRT treatments. Methods: For 6 MV conventional photon field, the authors evaluated and quantified the 2D bolus effect on skin doses for six different common patient immobilization/support devices, including carbon fiber grid with Mylar sheet, Orfit carbon fiber base plate, balsa wood board, Styrofoam, perforated AquaPlast sheet, and alpha-cradle. For 6 and 15 MV IMRT fields, a stack of two film layers positioned above a solid phantom was exposed at the air interface or in the presence of a patient alpha-cradle. All the films were scanned and the pixel values were converted to doses based on an established calibration curve. The authors determined the 2D skin dose distributions, isodose curves, and cross-sectional profiles at the surface layers with or without the immobilization/support device. The authors also generated and compared the dose area histograms (DAHs) and dose area products from the 2D skin dose distributions. Results: In contrast with 20% relative dose [(RD) dose relative to d{sub max} on central axis] at 0.0153 cm in the film layer for 6 MV 10x10 cm{sup 2} open field, the average RDs at the same depth in the film layer were 71%, 69%, 55%, and 57% for Orfit, balsa wood, Styrofoam, and alpha-cradle, respectively. At the same depth, the RDs were 54% under a strut and 26% between neighboring struts of a carbon fiber grid with Mylar sheet, and between 34% and 56% for stretched perforated AquaPlast sheet. In the presence of the alpha-cradle for the 6 MV (15 MV) IMRT fields, the hot spot doses at the effective measurement depths of 0.0153 and 0.0459 cm were 140% and 150% (83% and 89%), respectively, of the isocenter dose. The enhancement factor was defined as the ratio of a given DAH parameter (minimum dose received in a given area) with and without the support device. For 6 MV conventional 10x10 cm{sup 2} field, the enhancement factor was the highest (3.4) for the Orfit carbon fiber plate. As for the IMRT field, the enhancement factors varied with the size of the area of interest and were as high as 3.8 (4.3) at the hot spot of 5 cm{sup 2} area in the top film layer (0.0153 cm) for 6 MV (15 MV) beams. Conclusions: Significant 2D bolus effect on skin dose in the presence of patient support and immobilization devices was confirmed and quantified with EBT film dosimetry. Furthermore, the EBT film has potential application for in vivo monitoring of the 2D skin dose distributions during patient treatments.

60 APPLIED LIFE SCIENCES↗

Perpendicular magnetic tunnel junction with tunneling magnetoresistance ratio of 64% using MgO (100) barrier layer prepared at room temperature

MgO (100) textured films can be prepared by reactive facing targets sputtering at room temperature without postdeposition annealing process when they were deposited on (100) oriented Fe buffer layers. This method allows fabrication of perpendicular magnetic tunnel junction (p-MTJ) with MgO (100) tunneling barrier layer and rare-earth transition metal (RE-TM) alloy thin films as perpendicularly magnetized free and pinned layers. The 3-nm-thick MgO tunneling barrier layer in p-MTJ multilayer prepared on glass substrate revealed (100) crystalline orientation. Extraordinary Hall effect measurement clarified that the perpendicular magnetic components of 3-nm-thick Fe buffer layers on the two ends of MgO tunneling barrier layer were increased by exchange coupling with RE-TM alloy layers. The RA of 35 k{omega} {mu}m{sup 2} and tunneling magnetoresistance ratio of 64% was observed in the multilayered p-MTJ element by current-in-plane-tunneling.

36 MATERIALS SCIENCE↗

Effect of Rare Earth Elements (Er, Ho) on Semi-Metallic Materials (ScN) in an Applied Electric Field

The development of materials and fabrication technology for field-controlled spectrally active optics is essential for applications such as membrane optics, filters for LIDARs, windows for sensors, telescopes, spectroscopes, cameras and flat-panel displays. The dopants of rare earth elements, in a host of optical systems, create a number of absorption and emission band structures and can easily be incorporated into many high quality crystalline and amorphous hosts. In wide band-gap semiconductors like ScN, the existing deep levels can capture or emit the mobile charges, and can be ionized with the loss or capture of the carriers which are the fundamental basis of concept for smart optic materials. The band gap shrinkage or splitting with dopants supports the possibility of this concept. In the present work, a semi-metallic material (ScN) was doped with rare earth elements (Er, Ho) and tested under an applied electric field to characterize spectral and refractive index shifts by either Stark or Zeeman Effect. These effects can be verified using the UV-Vis spectroscopy, the Hall Effect measurement and the ellipsometric spectroscopy. The optical band gaps of ScN doped with Er and doped with Ho were experimentally estimated as 2.33eV and 2.24eV ( 0.2eV) respectively. This is less than that of undoped ScN (2.5 0.2eV). The red-shifted absorption onset is a direct evidence for the decrease of band gap energy (Eg), and the broadening of valence band states is attributable to the doping cases. A decrease in refractive index with an applied field was observed as a small shift in absorption coefficient using a variable angle spectroscopic ellipsometer. In the presence of an electric field, mobile carriers are redistributed within the space charge region (SCR) to produce this electro-refractive effect. The shift in refractive index is also affected by the density and location of deep potential wells within the SCR. In addition, the microstructure change was observed by a TEM analysis. These results give an insight for future applications for the field-controlled spectrally active material systems.

Kim, Hyunjung↗

Conductivity compensation in p-6H-SiC in irradiation with 8-MeV protons

Carrier removal rate (V{sub d}) in p-6H-SiC in its irradiation with 8-MeV protons has been studied. The p-6H-SiC samples were produced by sublimation in vacuum. V{sub d} was determined by analysis of capacitance-voltage characteristics and from results of Hall effect measurements. It was found that complete compensation of samples with initial value of N{sub a} - N{sub d} Almost-Equal-To 1.5 Multiplication-Sign 10{sup 18} cm{sup -3} occurs at an irradiation dose of {approx}1.1 Multiplication-Sign 10{sup 16} cm{sup -2}. In this case, the carrier removal rate was {approx}130 cm{sup -1}.

36 MATERIALS SCIENCE↗

Heteroepitaxial growth of GaN/Si (111) junctions in ammonia-free atmosphere: Charge transport, optoelectronic, and photovoltaic properties

We report the catalyst-free growth of gallium nitride (GaN) nanostructures on n-Si (111) substrates using physical vapor deposition via thermal evaporation of GaN powder at 1150 Degree-Sign C in the absence of NH{sub 3} gas. Scanning electron microscopy and energy dispersive x-ray analysis indicate that the growth rate of GaN nanostructures varies with deposition time. Photoluminescence spectra showed the suppression of the UV emission and the enhancement of the visible band emission with increasing the deposition time. The fabricated GaN nanostructures exhibited p-type behavior at the GaN/Si interface, which can be related to the diffusion of Ga into the Si substrate. The obtained lowest reflection and highest transmittance over a wide wavelength range (450-750 nm) indicate the high quality of the fabricated GaN films. Hall-effect measurements showed that all fabricated films have p-type behavior with decreasing electron concentration from 10{sup 21} to 10{sup 12} cm{sup -3} and increasing the electron mobility from 50 to 225 cm{sup 2}/V s with increasing the growth time. The fabricated solar cell based on the 1 h-deposited GaN nanostructures on n-Si (111) substrate showed a well-defined rectifying behavior with a rectification ratio larger than 8.32 Multiplication-Sign 10{sup 3} in dark. Upon illumination (30 mW/cm{sup 2}), the 1 h-deposited heterojunction solar cell device showed a conversion efficiency of 5.78%. The growth of GaN in the absence of NH{sub 3} gas has strong effect on the morphological, optical, and electrical properties and consequently on the efficiency of the solar cell devices made of such layers.

36 MATERIALS SCIENCE↗

Technical Note: A Monte Carlo study of magnetic-field-induced radiation dose effects in mice

Purpose: Magnetic fields are known to alter radiation dose deposition. Before patients receive treatment using an MRI-linear accelerator (MRI-Linac), preclinical studies are needed to understand the biological consequences of magnetic-field-induced dose effects. In the present study, the authors sought to identify a beam energy and magnetic field strength combination suitable for preclinical murine experiments. Methods: Magnetic field dose effects were simulated in a mouse lung phantom using various beam energies (225 kVp, 350 kVp, 662 keV [Cs-137], 2 MV, and 1.25 MeV [Co-60]) and magnetic field strengths (0.75, 1.5, and 3 T). The resulting dose distributions were compared with those in a simulated human lung phantom irradiated with a 6 or 8 MV beam and orthogonal 1.5 T magnetic field. Results: In the human lung phantom, the authors observed a dose increase of 45% and 54% at the soft-tissue-to-lung interface and a dose decrease of 41% and 48% at the lung-to-soft-tissue interface for the 6 and 8 MV beams, respectively. In the mouse simulations, the magnetic fields had no measurable effect on the 225 or 350 kVp dose distribution. The dose increases with the Cs-137 beam for the 0.75, 1.5, and 3 T magnetic fields were 9%, 29%, and 42%, respectively. The dose decreases were 9%, 21%, and 37%. For the 2 MV beam, the dose increases were 16%, 33%, and 31% and the dose decreases were 9%, 19%, and 30%. For the Co-60 beam, the dose increases were 19%, 54%, and 44%, and the dose decreases were 19%, 42%, and 40%. Conclusions: The magnetic field dose effects in the mouse phantom using a Cs-137, 3 T combination or a Co-60, 1.5 or 3 T combination most closely resemble those in simulated human treatments with a 6 MV, 1.5 T MRI-Linac. The effects with a Co-60, 1.5 T combination most closely resemble those in simulated human treatments with an 8 MV, 1.5 T MRI-Linac.

60 APPLIED LIFE SCIENCES↗

Research concerning the net flux of radiation in the atmosphere of Jupiter

The plan of the NFR (Net Flux of Radiation) team is for the data from the two solar channels (B and E) of NFR to be reduced with the goal of determining the solar heating rate. In order to determine the solar heating rate from the NFR measurements, effects due to the instrument's spatial and spectral response functions, to the temperature variation of the instrument (and associated drift of calibration), to the setting sun, and to the rotation of the probe (initially at a rate comparable to the NFR sampling frequency), all must be well modelled. In the past year, a forward modeling routine was created to simulate NFR data return in the B and E channels. The effects of varying parameters describing the atmospheric model (such as cloud location and thickness) and the descent profile (such as rotation rate) were investigated and an inversion routine was developed. For the forward modeling, existing radiative transfer codes were used to determine intensity fields within the Jovian atmosphere. A routine was developed to determine instantaneous instrument response by integrating the intensity field over the instrument response functions. A second routine was developed to determine the actual output of the NFR by integrating along an arbitrary descent trajectory. Near the top of the atmosphere, the upflux data alone are used to constrain the cloud structure of he atmosphere. To accomplish this, models are used to describe the variation in up flux between consecutive measurements in terms of variations of cloud opacity and variations in known parameters such as the solar zenith angle. This allows us to develop a zero-order model of cloud structure. Lower in the atmosphere, at levels where there is little or no azimuthal structure to the net flux measurements, both the up flux and net flux are used to derive layer transmission and reflection functions, which then determine layer opacity and single scattering albedo. A preliminary analysis of the data began in December 1995. In these data we could see the rapid oscillations expected at the beginning of the data due to probe rotation and the sun passing through the edge of the field of view. In addition, the time when this oscillation stopped was clearly visible. This sets the rough optical depth above the probe at this time.

Tomasko, M. G.↗

Growth and properties of epitaxial GdN

Epitaxial gadolinium nitride films with well-oriented crystallites of up to 30 nm have been grown on yttria-stabilized zirconia substrates using a plasma-assisted pulsed laser deposition technique. We observe that the epitaxial GdN growth proceeds on top of a gadolinium oxide buffer layer that forms via reaction between deposited Gd and mobile oxygen from the substrate. Hall effect measurements show the films are electron doped to degeneracy, with carrier concentrations of 4x10{sup 20} cm{sup -3}. Magnetic measurements establish a T{sub C} of 70 K with a coercive field that can be tuned from 200 Oe to as low as 10 Oe.

36 MATERIALS SCIENCE↗

Extended x-ray absorption fine structure study of arsenic in HgCdTe: p-type doping linked to nonsubstitutional As incorporation in an unknown AsHg{sub 8} structure

An extended x-ray absorption fine structure (EXAFS) investigation has been carried out on arsenic-doped Hg{sub 70}Cd{sub 30}Te samples. The incorporation of atomic arsenic has been achieved using a nonconventional radio-frequency plasma source in a molecular beam epitaxy reactor. Two samples from the same epitaxial wafer have been studied. One underwent a 400 deg. C activation annealing under Hg pressure, leading to n to p-type conversion. In the commonly admitted scenario, this conversion is associated with the annealing-induced migration of As from a Hg site to a Te site. This study shows that this is not the case. Before annealing, As is found to be involved in noncrystalline structures: 50% inside an As{sub 2}Te{sub 3} chalcogenide glass and 50% inside a new AsHg{sub 8} compact structure. After annealing, the As{sub 2}Te{sub 3} chalcogenide glass disappears, 31% of As occupies Hg sites and 69% incorporates inside this new AsHg{sub 8} compact structure that occupies Te sites. The EXAFS results are in excellent agreement with 77 K Hall-effect measurements. The new AsHg{sub 8} structure is found to have an acceptor behavior. Overall, this study provides an entirely new vision of extrinsic p-type doping of HgCdTe as well as the first experimental evidence of As site transfer induced by annealing.

36 MATERIALS SCIENCE↗

Generation and transportation mechanisms for two-dimensional hole gases in GaN/AlGaN/GaN double heterostructures

The electrical properties of two-dimensional hole gases (2DHGs) in GaN/AlGaN/GaN double heterostructures were investigated. The layers were grown on sapphire substrates and a high-quality bulk GaN substrate. The coexistence of 2DHG and 2D electron gases on both sides of the AlGaN layer was confirmed by Hall effect measurements at 80–460 K. It was also verified that the 2DHGs were generated by negative polarization at the undoped GaN/AlGaN interface, which did not have a doped Mg acceptor. It was also demonstrated that the 2DHG density could be controlled by varying the AlGaN layer thickness and was inversely related to the 2DHG mobility. The measured relation indicated that the 2DHG mobility is mainly limited by phonon scatterings at around room temperature. As a result, the maximum 2DHG mobility of 16 cm{sup 2}/Vs at 300 K was achieved with a density of 1 × 10{sup 13} cm{sup −2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HOW ENVIRONMENT AFFECTS GALAXY METALLICITY THROUGH STRIPPING AND FORMATION HISTORY: LESSONS FROM THE ILLUSTRIS SIMULATION

Recent studies have found higher galaxy metallicities in richer environments. It is not yet clear, however, whether metallicity-environment dependencies are merely an indirect consequence of environmentally dependent formation histories, or of environmentally related processes directly affecting metallicity. Here, we present a first detailed study of metallicity-environment correlations in a cosmological hydrodynamical simulation, in particular, we focus on the Illustris simulation. Illustris galaxies display similar relations to those observed. Utilizing our knowledge of simulated formation histories, and leveraging the large simulation volume, we construct galaxy samples of satellites and centrals with matching formation histories. This allows us to find that ∼1/3 of the metallicity-environment correlation is due to different formation histories in different environments. This is a combined effect of satellites (in particular, in denser environments) having on average lower z = 0 star formation rates (SFRs), and of their older stellar ages, even at a given z = 0 SFR. Most of the difference, ∼2/3, however, is caused by the higher concentration of star-forming disks of satellite galaxies, as this biases their SFR-weighted metallicities toward their inner, more metal-rich parts. With a newly defined quantity, the “radially averaged” metallicity, which captures the metallicity profile but is independent of the SFR profile, the metallicities of satellites and centrals become environmentally independent once they are matched in formation history. We find that circumgalactic metallicity (defined as rapidly inflowing gas around the virial radius), while sensitive to environment, has no measurable effect on the metallicity of the star-forming gas inside the galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

The effects of spaceflight on the mineralization of rat incisor dentin

Specific effects of space flight on dentin formation on the lower incisors of male rats were determined. Data were Fourier analyzed to determine the spectra of chemical growth rhythms. It was found that Calcium and P were more concentrated in the newly forming dentin of the Flight rats than in comparable regions of control tissues. There was no significant difference in the mean S-concentration between the two groups, but the pattern of S-distribution in the recently formed dentin from the Flight rats was different from that in the control group. Sulfur fluctuations in flight animals periodically peak above the irregular background fluctuations, but there are no comparable sulfur peaks across the dentin in the control. It is indicated that spaceflight has measurable effects on dentinogenesis, and may also bear on the problem of the regulatory role of proteoglycans in mineralization and the maturation of mineral and matrix moieties in skeletal tissue.

Simmons, D. J.↗

Strain-induced modification in the magnetic properties of Mn{sub 5}Ge{sub 3} thin films

Epitaxial ferromagnetic Mn{sub 5}Ge{sub 3} thin films were stabilized on GaSb(001) and GaAs(001) substrates using molecular beam epitaxy. Compared to bulk Mn{sub 5}Ge{sub 3} materials, an enhancement of the Curie temperature above 350 K and about 320 K was observed for Mn{sub 5}Ge{sub 3}/GaAs(001) and Mn{sub 5}Ge{sub 3}/GaSb(001) heterostructures, respectively. The magnetization was found to decrease from 323 to 245 emu/cm{sup 3} for films grown on GaSb(001) and GaAs(001). Anomalous Hall effect measurements provide evidence of the strain-induced large spin polarization from density-functional study. Furthermore, our calculated results in bulk Mn{sub 5}Ge{sub 3} under strain indicate that the strain is the origin of different physical properties of Mn{sub 5}Ge{sub 3} grown on different substrates.

36 MATERIALS SCIENCE↗