Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “drawing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Quantifying Dynamic Signal Spread in Real-Time High-Energy X-ray Diffraction

Abstract Measured intensity in high-energy monochromatic X-ray diffraction (HEXD) experiments provides information regarding the microstructure of the crystalline material under study. The location of intensity on an areal detector is determined by the lattice spacing and orientation of crystals so that changes in the heterogeneity of these quantities are reflected in the spreading of diffraction peaks over time. High temporal resolution of such dynamics can now be experimentally observed using technologies such as the mixed-mode pixel array detector (MM-PAD) which facilitates in situ dynamic HEXD experiments to study plasticity and its underlying mechanisms. In this paper, we define and demonstrate a feature computed directly from such diffraction time series data quantifying signal spread in a manner that is correlated with plastic deformation of the sample. A distinguishing characteristic of the analysis is the capability to describe the evolution from the distinct diffraction peaks of an undeformed alloy sample through to the non-uniform Debye–Scherrer rings developed upon significant plastic deformation. We build on our previous work modeling data using an overcomplete dictionary by treating temporal measurements jointly to improve signal spread recovery. We demonstrate our approach in simulations and on experimental HEXD measurements captured using the MM-PAD. Our method for characterizing the temporal evolution of signal spread is shown to provide an informative means of data analysis that adds to the capabilities of existing methods. Our work draws on ideas from convolutional sparse coding and requires solving a coupled convex optimization problem based on the alternating direction method of multipliers.

Engineering↗

A two-grid penalty method for American options

In this paper we consider the pricing of American options, governed by a partial differential complementarity problem. The differential problem is first approximated by a semi-linear PDE using two distinct penalty approaches which are well known in computational finance. We then initiate the two-grid algorithm by solving the nonlinear problem on a coarse grid and further the linearized in the interpolated coarse-grid solution problem on a fine grid. By means of the maximum principle the algorithm is shown to be of fourth order convergence rate in space. Numerical experiments verify the presented two-grid approach where we draw some interesting conclusions.

97 MATHEMATICS AND COMPUTING↗

Change Agent: Energy Storage as a Driver of Regulatory Evolution

Purpose of Review Dividing the electric grid into the functions of generation, transmission, anddistribution enabled the drawing of jurisdictional lines and the application of the U.S.Constitution’s federalist system to energy regulation. Energy storage technologies,which can be placed throughout the grid to increase flexibility, can provide serviceacross all three of those functions. But the jurisdictional boundaries that have beendrawn around those functions have created barriers that restrict energy storagetechnologies from achieving their full potential. This review analyzes regulatory changes made to reduce barriers to storage deployment and their broader impacts on energy regulation in the U.S. Recent Findings Major energy regulations promulgated at the state and federal levels have generally focused on liberalizing the U.S. electric system through deregulation and increased competition. Paradoxically, however, these efforts have erected strict regulatory barriers that prevent energy storage technologies from providing service across multiple functions. A new wave of regulations in recent years has endeavored to reduce and remove those barriers. Summary Energy regulations adopted in recent years to reduce barriers to energy storage functionality in recent years have had deep and far-reaching impacts on U.S. electric regulation. These impacts go beyond storage and affect all energy technologies. This paper traces the development of energy regulation in U.S., the functional barriers that they created that impede energy storage functionality, recent efforts to remove those barriers, and the broader effects of those efforts. It concludes with a brief discussion of remaining barriers that prevent energy storage from reaching their full potential on the U.S. electric grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A Common Tracking Software Project

Abstract The reconstruction of the trajectories of charged particles, or track reconstruction, is a key computational challenge for particle and nuclear physics experiments. While the tuning of track reconstruction algorithms can depend strongly on details of the detector geometry, the algorithms currently in use by experiments share many common features. At the same time, the intense environment of the High-Luminosity LHC accelerator and other future experiments is expected to put even greater computational stress on track reconstruction software, motivating the development of more performant algorithms. We present here A Common Tracking Software (ACTS) toolkit, which draws on the experience with track reconstruction algorithms in the ATLAS experiment and presents them in an experiment-independent and framework-independent toolkit. It provides a set of high-level track reconstruction tools which are agnostic to the details of the detection technologies and magnetic field configuration and tested for strict thread-safety to support multi-threaded event processing. We discuss the conceptual design and technical implementation of ACTS, selected applications and performance of ACTS, and the lessons learned.

97 MATHEMATICS AND COMPUTING↗

Synchrotron high energy X-ray diffraction study of microstructure evolution of severely cold drawn NiTi wire during annealing

Microstructure evolution of a cold-drawn NiTi shape memory alloy wire was investigated by means of in-situ synchrotron high-energy X-ray diffraction during continuous heating. The cold-drawn wire contained amorphous regions and nano-crystalline domains in its microstructure. Pair distribution function analysis revealed that the amorphous regions underwent structural relaxation via atomic rearrangement when heated above 100 °C. The nano-crystalline domains were found to exhibit a strong cold work induced lattice strain anisotropy having a preferential <111> fiber orientation along the wire axial direction. The lattice strain anisotropy systematically decreased upon heating above 200 °C, implying a structural recovery. A broad conical texture was formed in the wire specimen after crystallization similar in detail to the initial <111> texture axial orientation of the nano-crystalline domains produced by the severe cold wire drawing deformation.

crystallization↗

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study evaluates the magnetic properties and microstructures of an isotropic 32.4Fe-38.1Co-12.9Ni-7.3Al-6.4Ti-3.0Cu (wt.%) alloy in terms of processing parameters such as annealing temperature, annealing time, application of an external magnetic field, as well as low-temperature “draw” annealing. Optimal spinodal morphology and spacing is formed within a narrow temperature and time range (~840 °C and 10 min) during thermal-magnetic annealing (MA). The ideal morphology is a mosaic structure consisting of periodically arrayed ~40 nm diameter (Fe-Co)-rich rods (α 1 phase) embedded in an (Al-Ni)-rich (α 2 phase) matrix. A Cu-enriched phase with a size of ~3–5 nm is located at the corners of two adjacent {110} facets of the α 1 phase. The MA process significantly increased remanence (B r ) (~40–70%) of the alloy due to biased elongation of the α 1 phase along the <100> crystallographic direction, which is closest in orientation to the applied magnetic field. As a result, the optimum magnetic properties of the alloy with an intrinsic coercivity (H cj ) of 1845 Oe and a maximum energy product (BH max ) of 5.9 MGOe were attributed to the uniformity of the mosaic structure.

36 MATERIALS SCIENCE↗

Designing shape-memory-like microstructures in intercalation materials

During the reversible insertion of ions, lattices in intercalation materials undergo structural transformations. These lattice transformations generate misfit strains and volume changes that, in turn, contribute to the structural decay of intercalation materials and limit their reversible cycling. In this paper, we draw on insights from shape-memory alloys, another class of phase transformation materials, that also undergo large lattice transformations but do so with negligible macroscopic volume changes and internal stresses. We develop a theoretical framework to predict structural transformations in intercalation compounds and identify crystallographic design rules necessary for forming shape-memory-like microstructures in intercalation materials. We use our approach to systematically screen open-source structural databases comprising $n$ > 5000 pairs of intercalation compounds. We identify candidate compounds, such as Li x Mn 2 O 4 (Spinel), Li x Ti 2 (PO 4 ) 3 (NASICON), that approximately satisfy the crystallographic design rules and can be precisely doped to form shape-memory-like microstructures. Throughout, we compare our analytical results with experimental measurements of intercalation compounds. We find a direct correlation between structural transformations, microstructures, and increased capacity retention in these materials. These results, more generally, show that crystallographic designing of intercalation materials could be a novel route to discovering compounds that do not decay with continuous usage.

36 MATERIALS SCIENCE↗

Controlling solute channel formation using magnetic fields

Solute channel formation introduces compositional and microstructural variations in a range of processes, from metallic alloy solidification, to salt fingers in ocean and water reservoir flows. Applying an external magnetic field interacts with thermoelectric currents at solid/liquid interfaces generating additional flow fields. This thermoelectric (TE) magnetohydrodynamic (TEMHD) effect can impact on solute channel formation, via a mechanism recently drawing increasing attention. To investigate this phenomenon, we combined in situ synchrotron X-ray imaging and Parallel-Cellular-Automata-Lattice-Boltzmann based numerical simulations to study the characteristics of flow and solute transport under TEMHD. Observations suggest the macroscopic TEMHD flow appearing ahead of the solidification front, coupled with the microscopic TEMHD flow arising within the mushy zone are the primary mechanisms controlling plume migration and channel bias. Two TE regimes were revealed, each with distinctive mechanisms that dominate the flow. Further, we show that grain orientation modifies solute flow through anisotropic permeability. These insights led to a proposed strategy for producing solute channel-free solidification using a time-modulated magnetic field.

36 MATERIALS SCIENCE↗

Sensor impact evaluation and verification for fault detection and diagnostics in building energy systems: A review

Sensors are the key information source for fault detection and diagnostics (FDD) in buildings. However, sensors are often not properly designed, installed, calibrated, located, and maintained, which negatively impacts FDD performance. Several sensor-related FDD topics have been widely studied, covering a wide range of fault types and applications. However, it is difficult to get a clear picture of the technical development of sensor-related topics in FDD. A systematic review of sensor topics is needed to summarize the existing research in a logical way, draw conclusions on the current development, and predict the future development of sensors in building FDD. To address this gap, we conducted a comprehensive literature review of more than 100 FDD-sensor-related papers. In this article, we subdivide the FDD tasks into building-level, system-level, and component-level FDD, and review sensor-related topics in each category. Our major conclusions are: (a) current data-driven FDD research focuses more on FDD algorithms than sensors, (b) sensor “hardware” research topics are less studied than sensor “software” topics, (c) very few papers focus on sensor engineering as an integral aspect of FDD development, and (d) some important sensor topics, such as sensor cost-effectiveness and sensor schema/layout/location, are not well studied. Finally, we discuss the need for a systematic framework of FDD sensors and models to integrate sensor design/selection, sensor data analysis/mining, feature selection, physics-based or data-driven algorithm development, sensor fault detection, sensor calibration, and sensor maintenance. Finally, expert interviews are conducted to validate the above findings and conclusions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The design of an additive manufactured dual arm manipulator system

Additive manufacturing (AM), commonly referred to as 3D printing, was originally used for rapid prototyping. However, research into new technologies has allowed AM to become applicable far beyond prototype fabrication. Oak Ridge National Laboratory (ORNL), sponsored by the Office of Naval Research, has designed and developed an anthropomorphic seven degree-of-freedom (DOF) dual arm hydraulic manipulator using metal AM technologies. The titanium manipulators were designed for subsea use. All electrical and fluidic passageways are printed into each arm. The novel, cam-based design uses low-flow, energy efficient valves. The hydraulic power unit is built into the base of the hydraulic arms’ mount. This article will detail the novel AM design of the hydraulic manipulator system. It will cover the manipulators’ pitch and rotary link designs, custom valves, hydraulic power unit, and the motivation for a dual arm design. This article will also describe lessons learned throughout the project and draw conclusions for future applications.

36 MATERIALS SCIENCE↗

Karhunen–Loève deep learning method for surrogate modeling and approximate Bayesian parameter estimation

We evaluate the performance of the Karhunen-Loève Deep Neural Network (KL-DNN) framework for surrogate modeling and approximate Bayesian parameter estimation in partial differential equation models. In the surrogate model, the Karhunen-Loève (KL) expansions are used for the dimensionality reduction of the number of unknown parameters and variables, and a deep neural network is employed to relate the reduced space of parameters to that of the state variables. The KL-DNN surrogate model is used to formulate a maximum-a-posteriori-like least-squares problem, which is randomized to draw samples of the posterior distribution of the parameters. We test the proposed framework for a hypothetical unconfined aquifer via comparison with the forward MODFLOW and inverse PEST++ iterative ensemble smoother (IES) solutions as well as the state-of-the-art Fourier neural operator (FNO) and deep operator networks (DeepONets) operator learning surrogate models. Our results show that the KL-DNN surrogate model outperforms FNO and DeepONet for forward predictions. For solving inverse problems, the randomized algorithm provides the same or more accurate Bayesian predictions of the parameters than IES as evidenced by the higher log-predictive probability of both the estimated parameter field and the forecast hydraulic head. The posterior mean obtained from the randomized algorithm is closer to the reference parameter field than that obtained with FNO as the maximum a posteriori estimate.

Approximate Bayesian inference↗

The contributions of microclimatic information in advancing ecosystem science

Drawing upon over 100 years of scholarly work on microclimate, we first present an overview of the history, key references, and critical issues surrounding the collection and utilization of microclimate records in ecosystem studies. We place particular emphasis on addressing specific and pressing issues related to the applications of microclimate at the community-ecosystem-landscape level, excluding those of controlled experiment such as growth chambers and greenhouses. Specifically, we: (1) highlight some key issues concerning the collection, quality assurance/quality control (QA/QC), and utilization of microclimatic data in ecosystem studies; (2) revisit microclimatic responses to the structural changes of ecosystems and landscapes; and (3) emphasize the significance of microclimate in understanding major ecosystem/landscape processes and functions. Vapor pressure deficit (VPD) is particularly emphasized for its calculation and use because of its burgeoning applications in the literature. Case studies for each of the three thematic topics are provided with selected references to demonstrate challenges and solutions. As the scientific community gears up to enhance microclimatic stations, we envision significant increases in the use of smart sensors, wireless access, networking, open databases, and computational capabilities. Understanding and addressing some of the issues raised in this synthesis paper may help advance microclimate research and foster collaboration with other relevant disciplines, such as ecosystem science.

54 ENVIRONMENTAL SCIENCES↗

Simulation of Thermal Stratification in BWR Suppression Pools with One Dimensional Modeling Method

The suppression pool in a boiling water reactor (BWR) plant not only is the major heat sink within the containment system, but also provides the major emergency cooling water for the reactor core. In several accident scenarios, such as a loss-of-coolant accident and extended station blackout, thermal stratification tends to form in the pool after the initial rapid venting stage. Accurately predicting the pool stratification phenomenon is important because it affects the peak containment pressure; the pool temperature distribution also affects the NPSHa (available net positive suction head) and therefore the performance of the Emergency Core Cooling System and Reactor Core Isolation Cooling System pumps that draw cooling water back to the core. Current safety analysis codes use zero dimensional (0-D) lumped parameter models to calculate the energy and mass balance in the pool; therefore, they have large uncertainties in the prediction of scenarios in which stratification and mixing are important. While three-dimensional (3-D) computational fluid dynamics (CFD) methods can be used to analyze realistic 3-D configurations, these methods normally require very fine grid resolution to resolve thin substructures such as jets and wall boundaries, resulting in a long simulation time. For mixing in stably stratified large enclosures, the BMIX++ code (Berkeley mechanistic MIXing code in C++) has been developed to implement a highly efficient analysis method for stratification where the ambient fluid volume is represented by one-dimensional (1-D) transient partial differential equations and substructures (such as free or wall jets) are modeled with 1-D integral models. This allows very large reductions in computational effort compared to multi-dimensional CFD modeling. One heat-up experiment performed at the Finland POOLEX facility, which was designed to study phenomena relevant to Nordic design BWR suppression pool including thermal stratification and mixing, is used for validation. Comparisons between the BMIX++, GOTHIC, and CFD calculations against the POOLEX experimental data are discussed in detail.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Low-Enriched Uranium (LEU) option for the conversion of FRM II

The Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II) is Germany’s most powerful research reactor and uses Highly Enriched Uranium (HEU) fuel enriched at 93 %. The Technical University of Munich (TUM) operates the reactor and has been mandated to convert the FRM II to a lower-enrichment fuel. In preparation for the lower-enrichment fuel downselection, planned for 2023, TUM is evaluating multiple conversion scenarios. In this paper, it is demonstrated that a conversion of FRM II to Low-Enriched Uranium (LEU) is scientifically possible when using the novel monolithic U-10Mo fuel system, which is currently in the qualification process. As a research reactor, safety criteria, neutron flux distribution and cycle length are key metrics. To begin, neutronic and thermal-hydraulic models were created based on current technical drawings and relevant material properties. Specifically tailored computational methods and coupling schemes have also been developed to properly evaluate all relevant characteristics for the conversion of the FRM II reactor. Using these models and methods, a systematic parameter study was performed to explore the defined design space. The results of that study indicate that many LEU designs using monolithic U-10Mo appear to be viable to convert FRM II to LEU. One example of an LEU solution for the FRM II reactor that fulfills the stated safety, compatibility and scientific performance requirements is discussed in more detail.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Eigenfunction statistics on quantum graphs

We investigate the spatial statistics of the energy eigenfunctions on large quantum graphs. It has previously been conjectured that these should be described by a Gaussian Random Wave Model, by analogy with quantum chaotic systems, for which such a model was proposed by Berry in 1977. The autocorrelation functions we calculate for an individual quantum graph exhibit a universal component, which completely determines a Gaussian Random Wave Model, and a system-dependent deviation. This deviation depends on the graph only through its underlying classical dynamics. Classical criteria for quantum universality to be met asymptotically in the large graph limit (i.e. for the non-universal deviation to vanish) are then extracted. We use an exact field theoretic expression in terms of a variant of a supersymmetric {sigma} model. A saddle-point analysis of this expression leads to the estimates. In particular, intensity correlations are used to discuss the possible equidistribution of the energy eigenfunctions in the large graph limit. When equidistribution is asymptotically realized, our theory predicts a rate of convergence that is a significant refinement of previous estimates. The universal and system-dependent components of intensity correlation functions are recovered by means of an exact trace formula which we analyse in the diagonal approximation, drawing in this way a parallel between the field theory and semiclassics. Our results provide the first instance where an asymptotic Gaussian Random Wave Model has been established microscopically for eigenfunctions in a system with no disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multi-instantons and exact results IV: Path integral formalism

Highlights: > O(N) anharmonic oscillators are considered in the path integral formalism. > Higher-order corrections to instantons are obtained using Feynman diagram calculations. > Generalized Bender-Wu formulas are confirmed. > The O(N) functional determinant describing the zero modes leads to higher-order terms. > Surprising cancellations are observed for the sextic oscillator. - Abstract: This is the fourth paper in a series devoted to the large-order properties of anharmonic oscillators. We attempt to draw a connection of anharmonic oscillators to field theory, by investigating the partition function in the path integral representation around both the Gaussian saddle point, which determines the perturbative expansion of the eigenvalues, as well as the nontrivial instanton saddle point. The value of the classical action at the saddle point is the instanton action which determines the large-order properties of perturbation theory by a dispersion relation. In order to treat the perturbations about the instanton, one has to take into account the continuous symmetries broken by the instanton solution because they lead to zero-modes of the fluctuation operator of the instanton configuration. The problem is solved by changing variables in the path integral, taking the instanton parameters as integration variables (collective coordinates). The functional determinant (Faddeev-Popov determinant) of the change of variables implies nontrivial modifications of the one-loop and higher-loop corrections about the instanton configuration. These are evaluated and compared to exact WKB calculations. A specific cancellation mechanism for the first perturbation about the instanton, which has been conjectured for the sextic oscillator based on a nonperturbative generalized Bohr-Sommerfeld quantization condition, is verified by an analytic Feynman diagram calculation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A thermodynamic cycle for the solar cell

A solar cell is a heat engine, but textbook treatments are not wholly satisfactory from a thermodynamic standpoint, since they present solar cells as directly converting the energy of light into electricity, and the current in the circuit as maintained by an electrostatic potential. Here we propose a thermodynamic cycle in which the gas of electrons in the ρ phase serves as the working substance. The interface between the ρ and n phases acts as a self-oscillating piston that modulates the absorption of heat from the photons so that it may perform a net positive work during a complete cycle of its motion, in accordance with the laws of thermodynamics. We draw a simple hydrodynamical analogy between this model and the “putt-putt” engine of toy boats, in which the interface between the water’s liquid and gas phases serves as the piston. We point out some testable consequences of this model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗