Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dominator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Common Cause Failures Dominate and Defeat Redundancy

Common cause failures occur when several malfunctions are produced by a single event or process. They are especially damaging when they eliminate an entire set of redundant systems and disable their intended function. Redundancy is used when the individual system failure probability is unacceptably high. Redundancy can improve the overall system failure probability if the failures are independent, but the reliability gain is limited if there are dependent failures having a common cause. No amount of redundancy can reduce the total failure probability below the common cause failure probability. Common cause failures defeat redundancy. Systems with high reliability requirements often use extensive redundancy. These highly redundant systems rarely fail unless all the redundant components providing a particular function fail. Complete failures of such highly redundant systems are then usually common cause failures. Common cause failures are prevalent in highly redundant, high reliability systems. Common cause failures dominate redundancy. Redundant systems may fail due to specification, design, manufacturing, operations, or maintenance problems that disable all the identical redundant systems. Common cause failures typically account for one tenth of all failures. If the failure probability is relatively low and common cause failures are significant, adding more than two or three redundant identical units usually gives little added reliability improvement. Common cause failures can be reduced by using diverse components with different technologies and manufacturers, by separating and shielding subsystems, and by avoiding shared control, power, or location. External events and shared vulnerabilities may still cause common cause failures.

common cause failures↗

The Evolution in Coma Molecular Composition of Comet C/2017 K2 (PanSTARRS) Across the H 2 O Sublimation Zone: ALMA Imaging of an H 2 O-Dominated Coma

We report a survey of molecular emission from cometary volatiles using the Atacama Large Millimeter/Submillimeter Array (ALMA) toward comet C/2017 K2 (PanSTARRS) carried out on UT 2022 September 21, 22, and 23 at a heliocentric distance r H 3 OH, and H 2 CO (along with continuum emission from dust) sampled molecular chemistry in C/2017 K2 at the inner edge of the H 2 O sublimation zone, the region from r H 2 O begins vigorously subliming and increasingly dominating comet activity, discerning parent from daughter or extended source species. This work presents spectrally integrated flux maps, production rates, and parent scale lengths for each molecule. CH 3 OH, CO, and HCN were produced within ~250 km of the nucleus, potentially including contributions from sublimation of icy grains. CS was consistent with production from CS 2 photolysis, and H 2 CO required production from extended sources in the coma. An ortho-to-para ratio of 2.9 ± 0.4 for H 2 CO was derived from simultaneously measured transitions of each spin species. The continuum was extended and spatially resolved, consistent with thermal emission from dust in the coma. Analysis of the continuum visibilities provided an upper limit on the nucleus diameter d <6.6 km and coma dust masses of (1.2-2.4) times10 11 kg.

Nathan X Roth↗

Time-Dependent Phase-Space Mapping of Space-Charge-Dominated Beams

In this paper we report on a proof of principle experiment for demonstrating the possibility of reconstructing the time resolved-phase-space distribution of a space-charge dominated beam by a tomographic technique which provides us with far more information than a time-sliced emittance. We emphasize that this work describes and demonstrates a new methodology which can be applicable to any beam pulse using imaging methods with the appropriate time resolution for the pulse duration. The combination of a high precision tomographic diagnostic with fast imaging screens and a gated camera are used to produce phase space maps of two beams: one with a parabolic current profile and another with a short perturbation atop a rectangular pulse. The correlations between longitudinal and transverse phase spaces are apparent and their impact on the dynamics is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonthermally Dominated Electron Acceleration during Magnetic Reconnection in a Low-beta Plasma

This work was motivated by electron acceleration during solar flares. After some introductory remarks on proposed particle acceleration mechanisms and questions needing answers, dynamic simulations and simulation results are presented including energy spectra and the formation of the power law distribution. In summary, magnetic reconnection is highly efficient at converting the free magnetic energy stored in a magnetic shear and accelerating electrons to nonthermal energies in low-β regime. The nonthermal electrons have a dominant fraction and form power-law energy spectra with spectral index p ~ 1 in low-β regime. Electrons are preferentially accelerated along the curvature drift direction along the electric field induced by the reconnection outflow. The results can be applied to explain the observations of electron acceleration during solar flares.

79 ASTRONOMY AND ASTROPHYSICS↗

System and method for extracting dominant orientations from a scene

In one embodiment, a method of identifying the dominant orientations of a scene comprises representing a scene as a plurality of directional vectors. The scene may comprise a three-dimensional representation of a scene, and the plurality of directional vectors may comprise a plurality of surface normals. The method further comprises determining, based on the plurality of directional vectors, a plurality of orientations describing the scene. The determined plurality of orientations explains the directionality of the plurality of directional vectors. In certain embodiments, the plurality of orientations may have independent axes of rotation. The plurality of orientations may be determined by representing the plurality of directional vectors as lying on a mathematical representation of a sphere, and inferring the parameters of a statistical model to adapt the plurality of orientations to explain the positioning of the plurality of directional vectors lying on the mathematical representation of the sphere.

97 MATHEMATICS AND COMPUTING↗

Evidence of a Sandy Suspended-Load Dominated River from the Mississippian Cypress Formation, Illinois, USA

Describes how diagnostic sedimentary facies and textures have been identfied by integrating new core and outcrop data, which enabled a new interpretation for the thick sandstones within the Cypress Formation as meandering or anastomosing fluvial deposits. The results provide new insight into the preservation of mesoforms and macroforms under the influence of suspended-load dominated transport as well as implications for the dynamics of Carboniferous continental scale river systems in the Illinois Basin.

Howell, Kalin↗

A new approach to enforcing discrete maximum principles in continuous Galerkin methods for convection-dominated transport equations

This work introduces a set of design principles and new algorithmic tools for enforcing maximum principles and/or positivity preservation in continuous finite element approximations to convection-dominated transport problems. Enabling a linear first-order advection equation as a model problem, we address the design of first-order artificial diffusion operators and their higherorder counterparts at the element matrix level. The proposed methodology leads to a nonlinear high-resolution scheme capable of resolving moving fronts and internal/boundary layers as sharp localized nonoscillatory features. The amount of numerical dissipation depends on the difference between the solution value at a given node and a local maximum or minimum. The shockcapturing numerical diffusion coefficient is designed to vanish as the nodal values approach a mass-weighted or linearity-preserving average. The universal applicability and simplicity of the element-based limiting procedure makes it an attractive alternative to edge-based algebraic flux correction.

Kuzmin, D.↗

Mutant xylan biosynthetic enzymes capable of dominant suppression of xylan biosynthesis

The present invention provides for a polypeptide capable of dominant suppression of a first naturally occurring IRX10, wherein the polypeptide comprises an amino acid sequence having at least 70% identity as compared to a second naturally occurring IRX10 wherein the polypeptide comprises one or more of the conserved amino acid indicated in FIG. 2 substituted with a different amino acid residue.

Brandon, Andrew↗

First Observation of Large Missing-Momentum (e,e&#x27;p) Cross-Section Scaling and the onset of Correlated-Pair Dominance in Nuclei

We report the first measurement of $x_B$-scaling in $(e,e'p)$ cross-section ratios off nuclei relative to deuterium at large missing-momentum of $350 \leq p_{miss} \leq 600$ MeV/c. The observed scaling extends over a kinematic range of $0.7 \leq x_B \leq 1.8$, which is significantly wider than $1.4 \leq x_B \leq 1.8$ previously observed for inclusive $(e,e')$ cross-section ratios. The $x_B$-integrated cross-section ratios become constant (i.e., scale) beginning at $p_{miss}\approx k_F$, the nuclear Fermi momentum. Comparing with theoretical calculations we find good agreement with Generalized Contact Formalism calculations for high missing-momentum ($> 375$ MeV/c), suggesting the observed scaling results from interacting with nucleons in short-range correlated (SRC) pairs. For low missing-momenta, mean-field calculations show good agreement with the data for $p_{miss}\le k_F$, and suggest that contributions to the measured cross-section ratios from scattering off single, un-correlated, nucleons are non-negligible up to $p_{miss}\approx 350$ MeV/c. Therefore, SRCs become dominant in nuclei at $p_{miss}\approx 350$ MeV/c, well above the nuclear Fermi Surface of $k_F \approx 250$ MeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Unitarity Triangle Angles from Penguin-Dominated B Meson Decays

In this time of transition to a new generation of quark flavor experiments we review both the theoretical and the experimental progress on the determination of unitarity triangle angles from penguin-dominated B decays. This summarizes the activities of the Working Group VI at the CKM2010 workshop.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Online Tracking of Two Dominant Inter-Area Modes of Oscillation in the Eastern Interconnection

Reliable power system operation requires that small-signal stability be maintained at all times. Mode meters are measurement-based tools that provide operators with situational awareness of the system's stability margin. They operate by continually tracking the inter-area modes of oscillation that govern small-signal stability. This paper reports on the deployment of mode meters for online monitoring of two dominant modes of oscillation in the United States' Eastern Interconnection (EI). The use of measurements from system operators across the interconnection to provide continuous tracking is novel in the EI. Results from over four months of analysis reveal diurnal patterns in the modes and demonstrate that they can be tracked through a variety of system conditions. The results from this study continue to build an understanding of the EI's modes that will inform future modeling and monitoring efforts.

Follum, James D.↗

Is the 80 - 20 Principle a Friend or a Foe? Critical Remarks on the Dominant Flat Gradient - 17206

The well-known 80 - 20 principle, also known as the Pareto principle, describes the fact that usually 80 % of the result is achieved by 20 % of the effort, because many probability distributions are caused by a power-law. This principle is valued in the realm of project management and management in general because of the fast progress which generally takes place in the first fifth of the process. If the final result is not exactly specified or resources are spent wisely, 100 % of the planned result will be reached easily. However, in nuclear business safety is a principal parameter. Therefore precision is inevitable. In long-lasting projects the bad end of the Pareto-distribution is dominant: The very shallowly-inclined gradient at the end of the graph means that results at that point come at a very high effort and cost. The graph reaches the 100% only asymptomatically, meaning the initially projected results are never met. Especially if in earlier project phases the Pareto principle is applied very successfully, a lot of work is transferred to the future. For example, in decommissioning projects the waste often is badly characterized causing an enormous effort in the process of characterization and qualification. Especially if funding or time are limited, it is important to be aware of the asymmetric distribution of applied work and result. The 80 - 20 principle is a great advantage, if you start a project and respect the asymmetric distribution of applied resources and results in your project plan. Especially in long-lasting projects with changing perspectives, this asymmetric distribution may cause massive delays and expansion of costs, because small changes near the end cause large/big effort due to consequences on the existing data. If the proper goal of a project is not entirely known in the beginning, it is very probable that the last 5 - 10 % of the result will cause major financial threat and extensions of the estimated time frame. If funding or time are limited, it is almost impossible to readjust a project in the estimated frame of resources. In this case a complete restart of the project may be more reasonable than a long-lasting change management with uncertain results. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigation of methods for targeted search of dominant higher modes in subcritical systems

The reactor physics modeling of subcritical systems requires a substantially different approach from that of a critical reactor due to the presence of the so-called higher modes. Earlier investigations showed that the dominant higher modes lie in the inner part of the eigenvalue spectrum, making the conventional eigenvalue searches unfeasible and calling for a targeted search. This paper investigates the possibility of targeted and multitudinous eigenvalue calculation by testing the Krylov-Schur and the Dynamic Modes Decomposition (DMD) method for simple, analytically tractable problems. While the DMD method clearly showed its efficiency in a one-group homogeneous problem, modal analysis of a three-dimensional reflected reactor in two-groups approximation demonstrated that the increasing complexity poses challenges for both methods. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Probing the matter-dominated expansion with multi-redshift Lyman-$α$ BAO from DESI DR2

We present a multi-redshift Baryon Acoustic Oscillations (BAO) analysis of the DESI Data Release 2 (DR2) Lyman-$α$ (Ly$α$) forest, splitting the forest auto-correlation and its cross-correlation with quasars into three redshift bins. We obtain BAO measurements at effective redshifts $z_{\rm eff} = 2.13$, $2.40$, and $2.81$ with $\sim2.0$--$2.5\%$ precision per bin in the radial and transverse directions, corresponding to $\sim1.1$--$1.2\%$ precision for the isotropic BAO measurement. Using the same data products and modeling framework as the DESI DR2 Ly$α$ BAO analysis, we validate the pipeline on $400$ synthetic datasets and find unbiased BAO recovery with well-calibrated uncertainties. The measurements show an increase in the isotropic dilation parameter $D_V/r_d$ from $30.26\pm0.39$ to $32.22\pm0.47$ and in the Alcock-Paczyński parameter $D_M/D_H$ from $3.96\pm0.15$ to $5.63^{+0.22}_{-0.24}$. The Hubble distance $D_H/r_d$ decreases from $9.40\pm0.20$ to $7.22\pm0.17$, providing a direct measurement of the expansion history consistent with $Λ$CDM and the expected matter-dominated scaling, with $H(z)\propto(1+z)^n$ giving $n=1.34\pm0.16$. The redshift split also provides a self-consistent measurement of clustering evolution: the Ly$α$ forest bias evolves as $(1+z)^γ$ with $γ_α=3.05\pm0.16$, the RSD parameter has a redshift evolution described by $γ_β=-0.97\pm0.26$, and the quasar bias evolves with $γ_Q=1.56\pm0.23$, consistent with independent quasar clustering measurements. Combining these three-bin BAO measurements with DESI DR2 galaxy and quasar BAO measurements yields cosmological constraints consistent with the single-bin Ly$α$ BAO analysis in flat $Λ$CDM and $w_0w_a$CDM and improves curvature constraints by $\sim12\%$ in $Λ$CDM$+Ω_\mathrm{K}$.

Herrera-Alcantar, Hiram K. [Paris, Inst. Astrophys↗

Calcite precipitation dominates the electrical signatures of zero valent iron columns under simulated field conditions

Calcium carbonate is a major secondary mineral precipitate that influences PRB reactivity and hydraulic performance. In this study, we conducted column experiments to investigate electrical signatures resulting from concurrent CaCO3 and iron oxides precipitation in two simulated PRB media. Solid phase analysis identified CaCO3 (calcite and aragonite) as a major mineral phase throughout the columns, with magnetite being another major phase present close to the influent. Electrical measurements revealed a consistent decrease in conductivity and polarization magnitude of both columns, suggesting that the electrically insulating CaCO3 dominates the electrical response despite the presence of both electrically conductive iron oxides and CaCO3 precipitates. SEM/EDX imaging suggests that the electrical properties result from the geometrical arrangement of the mineral phases. The CaCO3 forms an insulating film on ZVI/magnetite surfaces, which we assume restricts redox-driven transfer of electric charge between the pore electrolyte and ZVI particles, as well as across interconnected ZVI particles. As surface reactivity also depends on the ability of the surface to engage in redox reactions, electrical measurements may provide a minimally invasive technology for monitoring reactivity loss.

58 GEOSCIENCES↗

A novel design of iron dominated superconducting multipole magnets with circular coils

Linear accelerators based on superconducting magnet technology use a large number of relatively weak superconducting quadrupoles. In this case an iron dominated quadrupole is the most cost effective solution. The field quality in this magnet is defined by iron poles; the magnet air gap is minimal as are coil ampere-turns. Nevertheless, it has long racetrack type coils, which must be rigid and fixed by a mechanical structure to provide the needed mechanical stability. The novel concept of using circular superconducting coils in such a quadrupole type is described, with a discussion of quadrupole parameters, and results of 3D magnetic designs. Variants of short and long sectional quadrupoles and multipoles are presented.

43 PARTICLE ACCELERATORS↗