Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed data structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A method for predicting failure statistics for steady state elevated temperature structural components

This paper presents the initial development of a high temperature life prediction method that accounts for the variability in the material properties of Grade 91 steel. The method accounts for material variability by fitting a variable 3-parameter Weibull distribution to experimental rupture data and accounts for the variability of creep deformation on the steady-state stresses via a Monte Carlo approach. To ensure reasonable computational times, the model represents the material as an extremely viscous Stokes fluid with a non-Newtonian viscosity, therefore solving the stress relaxation problem with a steady, static, instead of transient, analysis. Furthermore, the complete statistical analysis combines this model for creep deformation with a probabilistic model for creep rupture to evaluate the probability of premature failure for a set of sample problems, comparing the predicted failure statistics to the design life predicted by the ASME Boiler and Pressure Vessel Code rules.

42 ENGINEERING↗
DOE OSTI2018

Survival function analysis of planet size distribution with Gaia Data Release 2 updates

Applying the survival function analysis to the planet radius distribution of the Kepler confirmed/candidate planets, we have identified two natural divisions of planet radius at 4 Earth radii (R ⊕ ) and 10 R ⊕ . These divisions place constraints on planet formation and interior structure model. The division at 4 R ⊕ separates small exoplanets from large exoplanets above. When combined with the recently discovered radius gap at 2 R ⊕ , it supports the treatment of planets in between 2 and 4 R ⊕ as a separate group, likely water worlds. For planets around solar-type FGK main-sequence stars, we argue that 2 R ⊕ is the separation between water-poor and water-rich planets, and 4 R ⊕ is the separation between gas-poor and gas-rich planets. Here, we confirm the slope of the survival function in between 4 and 10 R ⊕ to be shallower compared to either ends, indicating a relative paucity of planets in between 4 and 10 R ⊕ , namely the sub-Saturnian desert there. We name them transitional planets, as they form a bridge between the gas-poor small planets and gas giants. Accordingly, we propose the following classification scheme: (<2 R ⊕ ) rocky planets, (2–4 R ⊕ ) water worlds, (4–10 R ⊕ ) transitional planets, and (>10 R ⊕ ) gas giants.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Signatures of Light Massive Relics on non-linear structure formation

ABSTRACT Cosmologies with Light Massive Relics (LiMRs) as a subdominant component of the dark sector are well-motivated from a particle physics perspective, and can also have implications for the σ8 tension between early and late time probes of clustering. The effects of LiMRs on the cosmic microwave background (CMB) and structure formation on large (linear) scales have been investigated extensively. In this paper, we initiate a systematic study of the effects of LiMRs on smaller, non-linear scales using cosmological N-body simulations; focusing on quantities relevant for photometric galaxy surveys. For most of our study, we use a particular model of non-thermal LiMRs but the methods developed generalizing to a large class of LiMR models – we explicitly demonstrate this by considering the Dodelson–Widrow velocity distribution. We find that, in general, the effects of LiMR on small scales are distinct from those of a ΛCDM universe, even when the value of σ8 is matched between the models. We show that weak lensing measurements around massive clusters, between ∼0.1 h−1Mpc and ∼10 h−1Mpc, should have sufficient signal-to-noise in future surveys to distinguish between ΛCDM and LiMR models that are tuned to fit both CMB data and linear scale clustering data at late times. Furthermore, we find that different LiMR cosmologies indistinguishable by conventional linear probes can be distinguished by non-linear probes if their velocity distributions are sufficiently different. LiMR models can, therefore, be best tested by jointly analyzing the CMB and late-time structure formation on both large and small scales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Elucidating the geometric and electronic structure of a fully sulfided analog of an Anderson polyoxomolybdate cluster

The catalytic activity of transition metal sulfide (TMS) clusters in small molecule activation, redox transformations, and charge transfer has inspired the design of novel TMS-based materials for energy-related catalysis and chemical applications. Polyoxometalates (POMs), known for their structural diversity, can in principle be transformed into TMS clusters; however, fully sulfided analogs are rarely isolated, likely due to the strong tendency of uncapped TMS clusters to agglomerate. Here, we report the geometric and electronic structure of a capping ligand-free fully sulfided analog of heptamolybdate Anderson POM [Mo VI 7 O 24 ] 6− , synthesized through the sulfidation of a nanoconfined POM secured within a porous Zr-metal organic framework (NU-1000). A combined computational and experimental analysis indicates that the sulfided counterpart of the Anderson POM is geometrically and electronically more sophisticated than the parent POM. Comparison of experimental pair distribution function (PDF) data with computational simulations confirms that, unlike the oxygen-only [Mo VI 7 O 24 ] 6− cluster, the [Mo IV 7 (μ 3 -S) 6 (μ 2 -SH) 6 (S 2 ) 6 ] 2− polythiometalate (PTM) exhibits diverse sulfur anions (S 2− , HS − , S 2 2− ). DFT calculations indicate that H 2 S acts as a reducing agent, and together with terminal disulfide (S 2 2− ) ligands in the PTM structure, facilitates the complete reduction of all seven Mo VI centers in the parent POM to Mo IV . These findings are supported by X-ray photoelectron spectroscopy (XPS), which confirms exclusive Mo IV , and elemental analysis, which shows quantitative sulfur incorporation. Difference envelope density (DED) mapping further reveals that the PTM clusters are spatially confined within the MOF pores, preventing agglomeration and preserving molecular integrity.

Rabbani, S. M. Gulam [The Ohio State University, C↗
DOE OSTI2026

Visualization of the surface distribution of photocatalytic activity at the anatase/rutile TiO2 interface using X-ray photoelectron emission microscopy

We applied X-ray photoelectron emission microscopy (XPEEM) to visualize the surface distribution of photocatalytic activity at the anatase/rutile (A/R) interface of titanium dioxide. Acetic acid was adsorbed on the surface, and its decomposition and desorption reactions under ultraviolet light irradiation were monitored by observing C 1s spectra, enabling direct observation of the spatial distribution of photocatalytic activity. Complementary crystal structure information was obtained using spatially resolved low-energy electron diffraction, low-energy electron microscopy, X-ray absorption spectroscopy, and micro-focused Raman spectroscopy. Comparison with these structural data allowed for the evaluation of the photocatalytic activity as a function of the distance from the A/R interface. The activity is enhanced in the vicinity of the interface and gradually decreases toward both the anatase and rutile regions. These results demonstrate that XPEEM is an effective technique for spatially resolved mapping of photocatalytic activity, which has\\r\\npreviously been inaccessible using conventional characterization techniques.

25 ENERGY STORAGE↗
DOE OSTI2022

High-throughput investigation of structural evolution upon solid-state in Cu–Cr–Co combinatorial multilayer thin-film

Cu-Cr-Co combinatorial multilayer thin-films were prepared by a high-throughput ion beam sputtering system. Based on the thickness ratio among the individual nanoscale monolayers (Cu, Cr, Co), the resulting stoichiometry covered the entire phase diagram. The chemical composition and structure of Cu-Cr-Co combinatorial chip upon solid-state reaction were studied by lab-based micro-X-ray fluorescence (mu-XRF) and high-throughput synchrotron X-ray diffraction (XRD), respectively. A composition-structure map for Cu-Cr-Co combinatorial chip was developed through automated data analysis employing hierarchical clustering techniques. The structural evolution of Cu-Cr-Co combinatorial chip as a function of heat-treatment temperature, time, and modulation period were studied systematically. Furthermore, the effect of the elemental distribution in-depth direction was investigated to gain more insights regarding phase transformation. This work provides an efficient method and new perspectives for the design and optimization of the composition and structure of high-performance thin-films.

36 MATERIALS SCIENCE↗
DOE OSTI2016

The nature of the CO{sub 2}{sup −} radical anion in water

The reductive conversion of CO{sub 2} into industrial products (e.g., oxalic acid, formic acid, methanol) can occur via aqueous CO{sub 2}{sup −} as a transient intermediate. While the formation, structure, and reaction pathways of this radical anion have been modelled for decades using various spectroscopic and theoretical approaches, we present here, for the first time, a vibrational spectroscopic investigation in liquid water, using pulse radiolysis time-resolved resonance Raman spectroscopy for its preparation and observation. Excitation of the radical in resonance with its 235 nm absorption displays a transient Raman band at 1298 cm{sup −1}, attributed to the symmetric CO stretch, which is at ∼45 cm{sup −1} higher frequency than in inert matrices. Isotopic substitution at C ({sup 13}CO{sub 2}{sup −}) shifts the frequency downwards by 22 cm{sup −1}, which confirms its origin and the assignment. A Raman band of moderate intensity compared to the stronger 1298 cm{sup −1} band also appears at 742 cm{sup −1} and is assignable to the OCO bending mode. A reasonable resonance enhancement of this mode is possible only in a bent CO{sub 2}{sup −}(C{sub 2v}/C{sub s}) geometry. These resonance Raman features suggest a strong solute-solvent interaction, the water molecules acting as constituents of the radical structure, rather than exerting a minor solvent perturbation. However, there is no evidence of the non-equivalence (C{sub s}) of the two CO bonds. A surprising resonance Raman feature is the lack of overtones of the symmetric CO stretch, which we interpret due to the detachment of the electron from the CO{sub 2}{sup −} moiety towards the solvation shell. Electron detachment occurs at the energies of 0.28 ± 0.03 eV or higher with respect to the zero point energy of the ground electronic state. The issue of acid-base equilibrium of the radical, which has been in contention for decades, as reflected in a wide variation in the reported pK{sub a} (−0.2 to 3.9), has been resolved. A value of 3.4 ± 0.2 measured in this work is consistent with the vibrational properties, bond structure, and charge distribution in aqueous CO{sub 2}{sup −}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Quantitative analysis of total reflection X-ray fluorescence from finely layered structures using XeRay

Total reflection x-ray fluorescence (TXRF) is a widely applicable experimental technique for studying chemical element distributions across finely layered structures at extremely high sensitivity. To promote and facilitate scientific discovery using TXRF, we developed a MATLAB-based software package with a graphical user interface, named XeRay, for quick, accurate, and intuitive data analysis. XeRay lets the user model any layered system, each layer with its independent chemical composition and thickness, and enables fine-tuned data fitting. The accuracy of XeRay has been tested in the analysis of TXRF data from both air/liquid interface and liquid/liquid interfacial studies and has been compared to literature results. In an air/liquid interface study, Ca 2+ sequestration was measured at a Langmuir monolayer of 1-stearoyl-2-oleoyl-sn-glycero-3-phosphatidic acid (SOPA) on a buffer solution of 1 mM CaCl2 at pH 7.5. Data analysis with XeRay reveals that each 1 nm2 of interfacial area contains 2.38 ± 0.06 Ca 2+ ions, which corresponds to a 1:1 ratio between SOPA headgroups and Ca 2+ ions, consistent with several earlier reports. For the liquid/liquid interface study of Sr 2+ enrichment at the dodecane/surfactant/water interface, analysis using XeRay gives a surface enrichment of Sr 2+ at $68^{+6}_{-5}$ Å 2 per ion, consistent with the result published for the same dataset.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Lattice vibrations and energy landscape of the isoelectronic semiconductor series CuBr, ZnSe, GaAs, and Ge: The special case of CuBr and its $\mathcal{d}$-level chemistry

Here we have examined the lattice vibrations and the energy landscape of the isoelectronic diamond and zincblende semiconductor series CuBr, ZnSe, GaAs, and Ge. Vibrations are found to be an increasing function of ionicity, with the cation sublattice always vibrating more strongly than the anion sublattice. These findings are consistent with density functional theory (DFT) calculations of the energy landscape and temperature-dependent molecular dynamics simulations of the atomic-position fluctuations. For CuBr, inclusion of the Cu 3d Hubbard U term is found necessary to stabilize the zincblende structure and to bring its vibrational amplitudes into agreement with experiment. In addition, vibrations are found to strongly affect the CuBr near-edge x-ray absorption fine structure that we have successfully modeled by including displacements in our theoretical Bethe-Salpeter equation calculations. Reverse Monte Carlo structural refinements using large atomic configurations to simultaneously fit x-ray absorption and x-ray total-scattering data support these conclusions, and they reveal strong Cu-Br first-neighbor correlations and asymmetric distributions of interatomic distances in the temperature ranges of both negative and positive thermal expansion. Delineation of the CuBr valence band photoelectron spectrum into its Cu 3d and Br 4p states uniquely reveals their covalent mixing and further supports the DFT results.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Preliminary Characterization and Mechanical Performance of Additively Manufactured HT9

Laser-blown powder deposition of HT9 was performed to evaluate the feasibility of using advanced manufacturing to fabricate creep strength enhanced ferritic steels. The as-printed materials were tensile tested at room temperature, 330°C, and 550°C to provide a baseline value for the strength levels. The as-fabricated strengths are then compared with wrought materials in the published literature. The strength parameters for the as-fabricated HT9 was found to be significantly higher than that of wrought HT9 without sacrifice in ductility. Two different heat treatment cycles, deemed ACO3 and FCRD, involving two different austentizing temperatures (1065°C and 1040°C) and tempering temperatures (750°C and 760°C) were then evaluated. The heat-treated samples were also tensile tested and were found to show strength and ductility parameters which closely mimicked that of the wrought HT9 literature data. Detailed multi-scale characterization was performed at various length scales. The as-fabricated structure showed a refined martensitic structure with a significant fraction of δ-ferrite present. Closer examination using TEM showed a refined distribution of carbides (predominantly M 23 C 6 and MX or M2X), which would have precipitated during the deposition process. Upon heat treatment, it was seen that the precipitates were more homogenous and refined in the case of the specimens heat treated according to the ACO 3 cycle although there was no significant difference in the strength or the hardness results. However, the specimens heat-treated per the FCRD cycle showed significantly smaller prior austenite grains (measure and give quantitative numbers), which could result in better Charpy toughness. However, the toughness was not evaluated and will be performed in the future. In addition, possible thermos-mechanical treatments (TMT) to refine the grain structure and improve the toughness without compromising the ductility will also be evaluated in the future.

36 MATERIALS SCIENCE↗
DOE OSTI2016

SciDAC-Data, A Project to Enabling Data Driven Modeling of Exascale Computing

The SciDAC-Data project is a DOE funded initiative to analyze and exploit two decades of information and analytics that have been collected by the Fermilab Data Center on the organization, movement, and consumption of High Energy Physics data. The project will analyze the analysis patterns and data organization that have been used by the NOvA, MicroBooNE, MINERvA and other experiments, to develop realistic models of HEP analysis workflows and data processing. The SciDAC-Data project aims to provide both realistic input vectors and corresponding output data that can be used to optimize and validate simulations of HEP analysis. These simulations are designed to address questions of data handling, cache optimization and workflow structures that are the prerequisites for modern HEP analysis chains to be mapped and optimized to run on the next generation of leadership class exascale computing facilities. We will address the use of the SciDAC-Data distributions acquired from Fermilab Data Center’s analysis workflows and corresponding to around 71,000 HEP jobs, as the input to detailed queuing simulations that model the expected data consumption and caching behaviors of the work running in HPC environments. In particular we describe in detail how the Sequential Access via Metadata (SAM) data handling system in combination with the dCache/Enstore based data archive facilities have been analyzed to develop the radically different models of the analysis of HEP data. We present how the simulation may be used to analyze the impact of design choices in archive facilities.

Mubarak, M.↗
DOE OSTI2023

Trends of Neutron Skins and Radii of Mirror Nuclei from First Principles

The neutron skin of atomic nuclei impacts the structure of neutron-rich nuclei, the equation of state of nucleonic matter, and the size of neutron stars. Here we predict the neutron skin of selected light- and medium-mass nuclei using coupled-cluster theory and the auxiliary field diffusion Monte Carlo method with two- and three-nucleon forces from chiral effective field theory. We find a linear correlation between the neutron skin and the isospin asymmetry in agreement with the liquid-drop model and compare with data. We also extract the linear relationship that describes the difference between neutron and proton radii of mirror nuclei and quantify the effect of charge symmetry breaking terms in the nuclear Hamiltonian. In conclusion, our results for the mirror-difference charge radii and binding energies per nucleon agree with existing data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Scalable PETSc Implementation of the Three-Phase Unbalanced AC Power Flow Solver

A revolutionary transition of energy infrastructure, spanning across supply and demand sectors, is happening all around the world. Integration of renewable energy sources into our ever-complex power distribution networks is central to the infrastructure planning of the future. One step towards achieving this goal is to solve unbalanced transmission and distribution systems. Traditional approaches and software tools are not suitable because they assume a completely balanced 3-phase system, hence a single-phase equivalent can be solved. Renewable energy such as wind and solar power are intermittent and can pose a challenge when integrating into an already unbalanced power grid. Furthermore, these power grids can be quite large at scale consisting of potentially thousands of buses, which can be computationally demanding. This poster presents preliminary work on designing a robust and scalable 3-phase unbalanced AC power flow solver. The proposed power flow solver will eventually be built on top of the PETSc library and utilizes state-of-the-art parallel data structures like the DMNetwork as well as iterative solvers and preconditioners.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

National Modeling of Geothermal District Energy Systems with Ambient-Temperature Loops Using dGeo: Preprint

Geothermal district energy systems (DES) with ambient-temperature loops, also known as thermal energy networks, are one option for decarbonizing space heating and cooling loads. Geothermal fifth-generation DES include an "ambient" temperature thermal loop that connects heat pumps at each building with thermal balancing sources such as geothermal borehole fields. Heating and cooling are provided via a water-source heat pump at each end-user. This project seeks to analyze the nationwide potential for ambient-temperature loop districts by creating a new module within the Distributed Geothermal Market Demand Model (dGeo). dGeo is an agent-based modeling tool for distributed geothermal resources; it can investigate potential on a nationwide or statewide scale using geospatial data for all 50 states and thermal demands for existing buildings. This process allows for high-level estimates of technical and economic potential for ambient-temperature loop districts across the United States. Using GHEDesigner, a lookup table was created to size borehole fields for different thermal loads and ground conditions experienced across the country. A cost and financing structure, along with incentives, were applied. Cost estimates include costs for the distribution network, borehole field installation and operation, and circulation pump operation, while savings are calculated based on agent energy bills. This newly developed module can be used for assessing which areas of the country have the highest potential for agent benefits from ambient-temperature loop installation and assess the impact of different costing and pricing future scenarios. While the code is still under development and nationwide simulations are ongoing, initial results for two states are provided. Future work includes expanding the module to consider mixed residential and commercial districts and considering multiple costing scenarios.

ambient temperature loop↗
DOE OSTI2025

National Modeling of Geothermal District Energy Systems with Ambient-Temperature Loops Using dGeo

Geothermal district energy systems (DES) with ambient-temperature loops, also known as thermal energy networks, are one option for decarbonizing space heating and cooling loads. Geothermal fifth-generation DES include an "ambient" temperature thermal loop that connects heat pumps at each building with thermal balancing sources such as geothermal borehole fields. Heating and cooling are provided via a water-source heat pump at each end-user. This project seeks to analyze the nationwide potential for ambient-temperature loop districts by creating a new module within the Distributed Geothermal Market Demand Model (dGeo). dGeo is an agent-based modeling tool for distributed geothermal resources; it can investigate potential on a nationwide or statewide scale using geospatial data for all 50 states and thermal demands for existing buildings. This process allows for high-level estimates of technical and economic potential for ambient-temperature loop districts across the United States. A lookup table was created using GHEDesigner to size borehole fields for different thermal loads and ground conditions experienced across the country. A cost and financing structure, along with incentives, were applied. Cost estimates include costs for the distribution network, borehole field installation and operation, and circulation pump operation, while savings are calculated based on energy bills for building owners (agents). This newly developed module can be used for assessing which areas of the country have the highest potential for agent benefits from ambient-temperature loop installation and assess the impact of future cost and price scenarios. Initial results for statewide analysis (for Vermont) and nationwide (for United States) are provided. Future work includes expanding the module to consider mixed residential and commercial districts as well as evaluating multiple cost scenarios.

ambient-temperature loop↗
DOE OSTI2018

Experimental and Computational Investigation of Subcritical Near-Nozzle Spray Structure and Primary Atomization in the Engine Combustion Network Spray D

In order to improve understanding of the primary atomization process for diesel-like sprays, a collaborative experimental and computational study was focused on the near-nozzle spray structure for the Engine Combustion Network (ECN) Spray D single-hole injector. These results were presented at the 5th Workshop of the ECN in Detroit, Michigan. Application of x-ray diagnostics to the Spray D standard cold condition enabled quantification of distributions of mass, phase interfacial area, and droplet size in the near-nozzle region from 0.1 to 14 mm from the nozzle exit. Using these data, several modeling frameworks, from Lagrangian-Eulerian to Eulerian-Eulerian and from Reynolds-Averaged Navier-Stokes (RANS) to Direct Numerical Simulation (DNS), were assessed in their ability to capture and explain experimentally observed spray details. Due to its computational efficiency, the Lagrangian-Eulerian approach was able to provide spray predictions across a broad range of conditions. In general, this “engineering-level” simulation was able to reproduce the details of the droplet size distribution throughout the spray after calibration of the spray breakup model constants against the experimental data. Complementary to this approach, higher-fidelity modeling techniques were able to provide detailed insight into the experimental trends. For example, interface-capturing multiphase simulations were able to capture the experimentally observed bimodal behavior in the transverse interfacial area distributions in the near-nozzle region. Further analysis of the spray predictions suggests that peaks in the interfacial area distribution may coincide with regions of finely atomized droplets, whereas local minima may coincide with regions of continuous liquid structures. Lastly, the results from this study highlight the potential of x-ray diagnostics to reveal salient details of the near-nozzle spray structure and to guide improvements to existing primary atomization modeling approaches.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Spatial and temporal patterns in age structure of Golden Eagles wintering in eastern North America

The behavior of wildlife varies seasonally, and that variation can have substantial demographic consequences. This is especially true for long-distance migrants where the use of landscapes varies by season and, sometimes, age cohort. In this study, we tested the hypothesis that distributional patterns of Golden Eagles (Aquila chrysaetos) wintering in eastern North America are age-structured (i.e., birds of similar ages winter together) through the analysis of 370,307 images collected by motion-sensitive trail cameras set over bait during the winters of 2012–2013 and 2013–2014. At nine sites with sufficient data for analysis, we documented 145 eagle visits in 2012–2013 and 146 in 2013–2014. We found significant between-year variation in age structure of wintering eastern Golden Eagles, driven largely by annual differences in the proportion of first-winter birds. However, although many other species show spatial structure in wintering behavior, our analysis revealed no latitudinal organization among age cohorts of wintering eastern Golden Eagles. The lack of age-related latitudinal segregation in wintering behavior does not exclude the possibility that these eagles have sex-based or other types of dominance hierarchies that could result in spatial or temporal segregation. Alternatively, other mechanisms such as food availability or habitat structure may determine the distribution and abundance of Golden Eagles in winter.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

Classification of background suppression profiles for low background RPM data

Suppression of the ambient gamma background radiation by traffic structure and cargo is a well-understood and studied effect for deployed radiation portal monitors (RPM). For effective analysis of measured RPM profiles with the objective of inferring the spatial characteristics of radiation sources, it is important to account for the effects of background suppression. In this report we analyze background suppression for a test dataset from vehicle RPMs at a sample port and estimate the distributions of suppression amplitudes and shapes. Cluster analysis of standardized and normalized profiles is used to obtain the dominant suppression shapes in the sample field data. We determine that a large fraction of non-alarm RPM occupancies are represented by a small number of suppression shapes. This fraction increases when the signal-to-noise ratio of an occupancy profile is improved by the addition of signals for multiple RPM detectors located at the same height. The calculated suppression shapes from RPM data can be used along with source models in the process of spatial profile analysis both in the field or offline. This background suppression analysis is an important step in improving the effectiveness of the RPM profile analysis methodology which is currently being investigated and may lead to methods that reduce the number of secondary inspections as well as to decision support tools that aid operators in evaluating RPM data that do not contain spectral information.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗