SEARCH · Engineering Papers

Results for “designed experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1984

A cometary ion mass spectrometer

The development of flight suitable analyzer units for that part of the GIOTTO Ion Mass Spectrometer (IMS) experiment designated the High Energy Range Spectrometer (HERS) is discussed. Topics covered include: design of the total ion-optical system for the HERS analyzer; the preparation of the design of analyzing magnet; the evaluation of microchannel plate detectors and associated two-dimensional anode arrays; and the fabrication and evaluation of two flight-suitable units of the complete ion-optical analyzer system including two-dimensional imaging detectors and associated image encoding electronics.

Shelley, E. G.↗

NASA NTRS1985

Parametric evaluation of ball milling of SiC in water

A statistically designed experiment was conducted to determine optimum conditions for ball milling alpha-SiC in water. The influence of pH adjustment, volume percent solids loading, and mill rotational speed on grinding effectiveness was examined. An equation defining the effect of those milling variables on specific surface area was obtained. The volume percent solids loading of the slurry had the greatest influence on the grinding effectiveness in terms of increase in specific surface area. As grinding effectiveness improved, mill and media wear also increased. Contamination was minimized by use of sintered alpha-SiC milling hardware.

Kiser, J. D.↗

NASA NTRS1985

A new theory aiming to define the mechanisms of material removal in electroerosion

Formulation of an electrohydrodynamic hypothesis to explain the mechanism of material removal in electroerosion, and results of experiments designed to verify the validity of the proposed hypothesis is discussed. A hypothesis is proposed according to which material is removed by a high-power liquid microjet which forms as a result of implosion of a vapor cavity between the two electrodes. Using a model of the implosion of a vapor cavity, a study is made of the energy dissipated in the arc zone as a function of the expended electrical energy.

Chincholle, L.↗

NASA NTRS1983

Spectral, spatial and radiometric factors in cover type discrimination

The influence of spatial, spectral, and radiometric resolutions on the utilization of Thematic Mapper (TM) and Multispectral Scanner (MSS) data is assessed quantitatively using a 2 x 2 x 2 factorial design experiment. Eight possible factor combinations were examined for agricultural, urban, forestry, range, and water types of land covers for three levels of information. Spectral bandwidths were configured to simulate all four Landsat MSS channels and Landsat TM channels 1, 2, 3, 4, and 7. By means of bar charts and tables it is shown that the 8-bit radiometric and 75-meter spatial resolutions provide a higher overall accuracy than the 6-bit radiometric and 25-meter spatial resolutions. Spectrally, the difference between the four MSS channels and five TM channel configurations is noted to be insignificant.

Alexander, D.↗

NASA NTRS1984

Space Shuttle flight test results of the Cosmic Ray Upset Experiment

CRUX is the first engineering flight experiment designed to test for the incidence of upsets in microcircuits by energetic particles. Harris HM 6504 4K x 1 static CMOS RAM's were used as the test device types in a 1.3 megabit memory which flew on two Shuttle flights. Ground (cyclotron) test information led to a prediction of about one error every 1000 days. No errors were experienced in 10 days of flight. While data were not in conflict with the error prediction and do support it, quantitative validation of the modeling for upsets is not statistically possible. Follow-on hardware (CRUX III) incorporates five different state-of-the-art microcircuits, and is scheduled for flight in October 1984.

Adolphsen, J. W.↗

NASA NTRS1984

NASA's plans for life sciences research facilities on a Space Station

A Life Sciences Research Facility on a Space Station will contribute to the health and well-being of humans in space, as well as address many fundamental questions in gravitational and developmental biology. Scientific interests include bone and muscle attrition, fluid and electrolyte shifts, cardiovascular deconditioning, metabolism, neurophysiology, reproduction, behavior, drugs and immunology, radiation biology, and closed life-support system development. The life sciences module will include a laboratory and a vivarium. Trade-offs currently being evaluated include (1) the need for and size of a 1-g control centrifuge; (2) specimen quantities and species for research; (3) degree of on-board analysis versus sample return and ground analysis; (4) type and extent of equipment automation; (5) facility return versus on-orbit refurbishment; (6) facility modularity, isolation, and system independence; and (7) selection of experiments, design, autonomy, sharing, compatibility, and integration.

Arno, R.↗

NASA NTRS1985

Seasonal simulations of the planetary boundary layer and boundary-layer stratocumulus clouds with a general circulation model

The formulation of the planetary boundary layer (PBL) and stratocumulus parametrizations in the UCLA general circulation model (GCM) are briefly summarized, and extensive new results are presented illustrating some aspects of the simulated seasonal changes of the global distributions of PBL depth, stratocumulus cloudiness, cloud-top entrainment instability, the cumulus mass flux, and related fields. Results from three experiments designed to reveal the sensitivity of the GCM results to aspects of the PBL and stratocumulus parametrizations are presented. The GCM results show that the layer cloud instability appears to limit the extent of the marine subtropical stratocumulus regimes, and that instability frequently occurs in association with cumulus convection over land. Cumulus convection acts as a very significant sink of PBL mass throughout the tropics and over the midlatitude continents in winter.

Randall, D. A.↗

NASA NTRS1986

Decluttering Methods for Computer-Generated Graphic Displays

Symbol simplification and contrasting enhance viewer's ability to detect particular symbol. Report describes experiments designed to indicate how various decluttering methods affect viewer's abilities to distinguish essential from nonessential features on computer-generated graphic displays. Results indicate partial removal of nonessential graphic features through symbol simplification effective in decluttering as total removal of nonessential graphic features.

Schultz, E. Eugene, Jr.↗

NASA NTRS1985

Particle Cloud Combustion Experiment

Preparation of flight experiment designs is supported by experimental studies of acoustically induced mixing process, optical transmissivities of particle cloud distributions, wall saturation effects and their control through the use of electrically neutral flame tube materials and surfaces, and the pyrolysis-vaporization kinetics of selected organic particulates. Drop tower tests of stabilized particle cloud flames have allowed valuable comparison of g = 0 and g = 1 (upwards and downwards) stabilized flame propagation. These stabilized flame data will be valuable assists in dealing with the freely propagating particle cloud flame data anticipated through Space Shuttle experimentation. Supporting theoretical studies emphasize comprehensive flame propagation and extinction relations among premixed single phase (gaseous) flames and premixed particle cloud flames, for both stabilized and freely propagating flames.

Berlad, A. L.↗

NASA NTRS1985

Parametric evaluation of ball milling of SiC in water

Kiser, J. D.↗

NASA NTRS1985

Tone excited jets. IV - Acoustic measurements

Attention is given to acoustic results from an experiment designed to deepen insight into the noise generated by a tone-excited jet, with emphasis on the mechanism of broadband jet noise amplification. Results are presented for both heated and unheated jets, with and without the effect of forward flight simulation over a range of excitation frequencies and levels, and for zero-order and first-order spinning modes. Broadband jet noise amplifications of up to 5 dB have been observed in this study. Relative velocity effects are the same for both excited and unexcited jets. It is concluded that small scale turbulence generates the additional broadband noise upon excitation of the jet by an upstream-injected discrete tone acoustic wave.

Ahuja, K. K.↗

NASA NTRS1985

An experimental investigation of agglutinate melting mechanisms - Shocked mixtures of sodium and potassium feldspars

The results of an experiment designed to test the validity of the model for agglutinate formation involving fusion of the finest fraction or F3 are reported. Impact glasses were formed from various mixes of orthoclase and albite powders, which were used as analogs for soils with chemically constrasting coarse and fine fractions. The results showed that the single most important factor displacing the composition of a small-scale impact melt from the bulk composition of the source regolith is the fractionated composition of the finest soil fraction. Volatile loss and the amount of melting, which in turn are determined by the degree of shock, are also important. As predicted by the model, the lower pressure melts are the most fractionated, and higher pressure is accompanied by increased melting causing glass compositions to approach the bulk. In general, the systematics predicted by the model are observed; the model appears to be valid.

Simon, S. B.↗

NASA NTRS1985

Changes in classification accuracy due to varying Thematic Mapper and multispectral scanner spatial, spectral, and radiometric resolution

The present paper provides the results of a factorial experiment designed to study the classification differences resulting from varying TM and MSS sensor resolution. Eight simulated data sets of various TM and MSS spatial, spectral, and radiometric resolutions were generated on the basis of Daedalus aircraft scanner data. It is pointed out that the current study provides more precise results than previous work, because more exact methods of data simulation with regard to the three factors were emphasized. Two methods of analysis are considered in the paper. To improve on earlier studies, efforts were made to collect an extensive amount of ground reference data. The summaries of classification accuracies for the training sites in the factorial analysis are presented in a table.

Acevedo, W.↗

NASA NTRS1986

In situ stratospheric ozone measurements by long path UV absorption - Developments and interpretation

A high-sensitivity, in situ UV absorption ozone sensor has been developed for use in the stratosphere. The instrument couples 254-nm radiation from a low-pressure mercury discharge lamp into a 40-pass White cell to attain a high-sensitivity ozone absorption measurement. Preflight/postflight laboratory tests utilizing an ozone source coupled to a laboratory UV ozone photometer in a fast-flow system as well as in-flight diagnostics verify the successful operation of the instrument. Evidence is presented to verify that in situ UV absorption ozone photometers can measure stratospheric ozone with better than 3 percent precision and 5 percent accuracy, provided proper attention is given to both the thermal field surrounding the gondola and the ambient pressure measurements. Ozone data are compared with modeled profiles in the 28- to 40-km region. An assessment of the disagreement between observations and modeled profiles is given along with suggestions for future experiments designed to constrain photochemical models.

Weinstock, E. M.↗

NASA NTRS1986

Determining the influence and effects of manufacturing variables on sulfur dioxide cells

A survey of the Li/SO2 manufacturing community was conducted to determine where variability exists in processing. The upper and lower limits of these processing variables might, by themselves or by interacting with other variables, influence safety, performance, and reliability. A number of important variables were identified and a comprehensive design experiment is being proposed to make the proper determinations.

Zajac, W. V.↗

NASA NTRS1986

New experiments to constrain the coefficients of the Robertson transformations for inertial systems

A feasibility study was conducted to evaluate a measurement of the variability in the one-way speed of light by a direct-time-of-flight approach. The proposed experiment design was successfully completed and the initial tests indicated that the approach is viable.

Torr, D. G.↗

NASA NTRS1987

Development of wind tunnel techniques for the solution of problems in planetary Aeolian processes

Kutzbach reports wind profiles over a series of roughness elements on a frozen lake and how the wind profile changed as the surface roughness was varied. The approach of the current study was to duplicate Kutzbach's roughness arrays in the wind tunnel at 1/20 and 1/40 scales, and to compare the wind profiles over these scale models to those derived by Kutzbach at full scale in the field. The effects of scale differences and data reduction techniques are discussed. Although the study suggests that wind tunnel scale models can predict parameters measured in the field, the development of more definitive guidelines requires a field experiment designed specifically for comparison with wind tunnel results.

Sullivan, Robert↗

NASA NTRS1987

Material interactions with the Low Earth Orbital (LEO) environment: Accurate reaction rate measurements

To resolve uncertainties in estimated LEO atomic oxygen fluence and provide reaction product composition data for comparison to data obtained in ground-based simulation laboratories, a flight experiment has been proposed for the space shuttle which utilizes an ion-neutral mass spectrometer to obtain in-situ ambient density measurements and identify reaction products from modeled polymers exposed to the atomic oxygen environment. An overview of this experiment is presented and the methodology of calibrating the flight mass spectrometer in a neutral beam facility prior to its use on the space shuttle is established. The experiment, designated EOIM-3 (Evaluation of Oxygen Interactions with Materials, third series), will provide a reliable materials interaction data base for future spacecraft design and will furnish insight into the basic chemical mechanisms leading to atomic oxygen interactions with surfaces.

Visentine, James T.↗