Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Aerosol effect on Umkehr ozone profiles using Stratospheric Aerosol and Gas Experiment II measurements

This study examines 1211 cases of coincident ozone profiles derived from 1164 Umkehrs and 928 Stratospheric Aerosol and Gas Experiment II (SAGE II) profiles within 1000 km and 12 hours between October 1984 and April 1989 to study the stratospheric-aerosol effect on Umkehr ozone profiles. Because of the close correspondence of stratospheric aerosol optical depth at the SAGE II-measured 0.525-micrometer wavelength and the extrapolated 0.32 Umkehr wavelength determined in this study we use the 0.525-micrometer data to determine the aerosol effect on Umkehr profiles. At the 95% confidence level, we find the following errors to the Umkehr ozone amounts: in Umkehr layer 9 (-2.9 +/- 2.1), layer 8 (-2.3 +/- 1.1), layer 7 (0.1 +/- 1.1), layer 6 (2.2 +/- 1.0), layer 5 (-1.5 +/- 0.8), and layer 4 (-2.4 +/- 1.7) in percent ozone amount per 0.01 stratospheric aerosol optical depth. These results agree with previous theoretical and empirical studies within their respective error bounds in layers 9, 8, and 7. The results in layers 6, 5, and 4 differ significantly from those in previous works. Using only those eight stations with more than 47 coincidences results in mean aerosol effects that are not significantly different from the 14-station results. Because SAGE II and Umkehr produce different ozone retrievals in layer 9 and because the intralayer correlation of SAGE II ozone and aerosol in layer 9 is nonzero, one must exercise some caution in attributing the entire SAGE II-Umkehr difference in this layer to an aerosol effect.

Newchurch, M. J.↗
NASA NTRS1997

A Comparison of Sea Ice Type, Sea Ice Temperature, and Snow Thickness Distributions in the Arctic Seasonal Ice Zones with the DMSP SSM/I

Global climate studies have shown that sea ice is a critical component in the global climate system through its effect on the ocean and atmosphere, and on the earth's radiation balance. Polar energy studies have further shown that the distribution of thin ice and open water largely controls the distribution of surface heat exchange between the ocean and atmosphere within the winter Arctic ice pack. The thickness of the ice, the depth of snow on the ice, and the temperature profile of the snow/ice composite are all important parameters in calculating surface heat fluxes. In recent years, researchers have used various combinations of DMSP SSMI channels to independently estimate the thin ice type (which is related to ice thickness), the thin ice temperature, and the depth of snow on the ice. In each case validation efforts provided encouraging results, but taken individually each algorithm gives only one piece of the information necessary to compute the energy fluxes through the ice and snow. In this paper we present a comparison of the results from each of these algorithms to provide a more comprehensive picture of the seasonal ice zone using passive microwave observations.

St.Germain, Karen↗
NASA NTRS1979

Asymmetries of the emission lines of QSOs, Seyfert galaxies, and novae

Calculations of the anisotropy of line emission from photoionized clouds, and the resulting asymmetry in the line profiles are discussed. The permitted emission-line profiles of Seyfert galaxies and QSO's often contain more light in the red than in the violet wing, and this asymmetry can arise from self-absorption of the line radiation in an expanding system of optically thick clouds. It is shown that the Balmer line optical depths are large enough to give strongly asymmetric line profiles for pure expansion, but the observed lack of strong asymmetry in the Balmer lines of most Seyfert galaxies suggests that the broad-line widths may result from random motions, or that clouds radiate isotropically. It is concluded that the frequently observed absorption of the violet wing of Lyman-alpha must occur in a surrounding region undergoing systematic outflow, or that the weakness of the Balmer line asymmetries is explained by the Balmer line emission resulting from collisional excitation from n=2.

Ferland, G. J.↗
NASA NTRS2002

The Micro-Pulse Lidar Network (MPL-Net)

In the early 1990s, the first small, eye-safe, and autonomous lidar system was developed, the Micro-pulse Lidar (MPL). The MPL has proven to be useful in the field because it can be automated, runs continuously (day and night), is eye-safe, can easily be transported and set up, and has a small field-of-view which limits multiple scattering concerns. The MPL acquires signal profiles of backscattered laser light from aerosols and clouds. The signals are analyzed to yield multiple layer heights, optical depths of each layer, average extinction-to-backscatter ratio of each layer, and profiles of extinction in each layer. The MPL has been used in a wide variety of field studies over the past 10 years, leading to nearly 20 papers and many conference presentations. In 2000, a new project using MPL systems was started at NASA Goddard Space Flight Center. The MPL-Net project is currently working to establish a worldwide network of MPL systems, all co-located with NASA's AERONET sunphotometers for joint measurements of optical depth and sky radiance. Automated processing algorithms have been developed to produce data products on a next day basis for all sites and some field experiments. Initial results from the first several sites are shown, along with aerosol data collected during several major field campaigns. Measurements of the aerosol extinction-to-backscatter ratio at several different geographic regions, and for various aerosol types are shown. This information is used to improve the construction of look up tables of the ratio, needed to process aerosol profiles acquired with satellite based lidars.

Welton, Ellsworth J.↗
NASA NTRS1985

Field Measurements of the 1983 Royal Gardens Lava Flows, Kilauea Volcano, and 1984 Mauna Loa Lava Flow, Hawaii

Theoretical models used in the remote determination of lava flow rheology and compositions rely on estimates of such geometric and flow parameters as volume flow rates, levee heights, and channel dimensions, as well as morphologic and structural patterns on the flow surfaces. Quantitative measures of these variables are difficult to obtain, even under optimum conditions. Detailed topographic profiles across several Hawaiian lava flows that were carefully monitored by the U.S. Geological Survey during their emplacement in 1983 were surveyed in order to test various flow emplacement models. Twenty two accurate channel cross sections were constructed by combining these profiles with digitized pre-flow topographic measurements. Levee heights, shear zone widths, and flow depths could then be read directly from the cross sections and input into the models. The profiles were also compared with ones constructed for some Martian lava flows.

Fink, J.↗
NASA NTRS1980

Remote sensing of subsurface water temperature by laser Raman spectroscopy

This paper describes experimental remote sensing of subsurface water temperature using the Raman spectroscopic technique. By the use of a pulsed laser and range gating detection techniques, Raman scattering is analyzed as a function of depth in a radar-like echo mode, and thus subsurface profiles of temperature and transmission are obtained. Experiments are described in which Raman data using polarization spectroscopy has been obtained from a ship as a function of depth in ocean water near Grand Bahama Island. A spectral temperature accuracy of + or - 1 C has been obtained from this data in the first two optical attenuation lengths. Raman data obtained from ocean water using the NASA airborne oceanographic lidar is also presented.

Leonard, D. A.↗
DOE OSTI2020

Algebraic expressions for estimating the impact depths of a surface barrier over a homogeneous soil

Engineered surface barriers are used to isolate subsurface contaminants for effective long-term containment of municipal solid waste, other nonhazardous solid and liquid waste, hazardous and toxic wastes, and radioactive waste. The impact depths of a surface barrier are affected by the pre-barrier recharge rate and the properties of the soil beneath the barrier. In this paper, the pore-size-specific (PSS) water velocity is defined and an algebraic expression of PSS velocity is derived based on the stream tube concept and the Brooks and Corey hydraulic retention model. Algebraic expressions are developed to estimate drainage velocities and barrier impact depths after the emplacement of a surface barrier. Four impact depth terms are used to convey the protective effect: drainage front, average drainage, the location with 50% impact, and drainage tail. The drainage front depth is the deepest point at which the barrier has a detectable impact at a specific time (also called the near zero-impact depth). The average-impact depth is the depth at which average drainage occurs. At the 50% impact depth, the water flux rate is reduced by half because of the surface barrier. Lastly, the drainage tail depth (also called the full-impact depth) is the deepest depth at which the water conditions above it are in equilibrium with the barrier. The algebraic expressions show that the average-impact depth is no more than 1/3 of near zero-impact depth, while the 50% impact depth is slightly larger than 1/2 of the near zero-impact depth. The full-impact depth, depending on the final recharge rate from the surface barrier, is usually much smaller than the other impact depths. These differences lead to a very large transition zone beneath a surface barrier. Numerical simulations were conducted to replicate the same conditions. The numerical results corroborated the analytical models by predicting very similar water content profiles and near zero-, average-, 50%, and full-impact depths. The algebraic expressions provided in this paper are useful for quickly identifying sites where the depth of the existing contaminants could be beyond the protection of a surface barrier.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

Al-26 production profile and model comparisons in Canyon Diablo

The large preatmospheric size of the Canyon Diablo meteorite, a radius of about 15 m, makes it especially suitable for systematic studies of cosmogenic nuclide production rates of iron objects in a 2 pi geometry. To reconstruct the exposure history of the meteoroid, Heymann et al. investigated several fragments recovered from known geographic locations around the crater for their shock features and cosmogenic nobel gases. They applied the Signer-Nier noble gas production rate model to establish the preatmospheric depth of the specimens in the meteoroid. Cosmic ray exposure ages suggested a multi-episodic irradiation, with 170 or 540 Ma being inferred for most of the samples studied while two anomalous specimens indicated a possible third exposure age at 940 Ma. Be-10 and Cl-36 have been measured in a number of these same samples by accelerator mass spectrometry (AMS), with use being made of the preatmospheric depths determined in Heymann et al. to construct production profiles. The present study extends the cosmogenic radionuclide data to Al-26 and compares the results with both the production rate model of Reedy and Arnold and production rates determined from the cross sections used by the Reedy-Arnold model (for the major nuclear reactions making Al-26) in combination with differential fluxes calculated using the Los Alamos High Energy Transport (LAHET) Code System. Model calculations for Be-10 and Cl-36 have also been obtained.

Michlovich, E.↗
NASA NTRS1979

The extent of lunar regolith mixing

The activity of solar cosmic-ray-produced Mn-53 measured as a function of depth in the upper 100 g/sq cm of lunar cores 60009-60010 and 12025-12028 is discussed. Analyses of samples from the Apollo 15 and 16 drill stems together with authors' previously published results (1974, 1976), and the Battelle Na-22 and Al-26 data, indicate that in three of the four cases studied the regolith was measurably disturbed within the last 10 m.y. Activities measured in the uppermost 2 g/sq cm indicate frequent mixing within this depth range. The Monte Carlo gardening model of Arnold (1975) was used to derive profiles for the gardened moon-wide average of Mn-53 and Al-26 as a function of depth. The Mn-53 and Al-26 experimental results agreed with theoretical predictions, but the calculated depths of disturbance appeared too low.

Nishiizumi, K.↗
NASA NTRS2021

A Semi-Empirical Scheme for Bathymetric Mapping in Shallow Water by ICESat-2 and Sentinel-2: A Case Study in the South China Sea

To derive shallow water bathymetry for coastal areas, a common approach is to deploy a scanning airborne bathymetric light detection and ranging (LiDAR) system or a shipborne echosounder for ground surveys. However, recent advancements in satellite remote sensing, including the Ice, Cloud and land Elevation Satellite-2 (ICESat-2) offer new tools for generating satellite derived bathymetry (SDB). The key payload onboard ICESat-2 is the Advanced Topographic Laser Altimeter System (ATLAS), a micro-pulse, photon-counting LiDAR system, simultaneously emitting six separate 532 nm beams at 10 kHz pulse rate. However, despite its high resolution, the major limitation for bathymetry is that ICESat-2 only provides along-track height profiles, leaving observation gaps between the parallel ground tracks. Merging ICESat-2 observations with optical multispectral imagery, as demonstrated herein, provides an effective solution for deriving a full scene of water depth in light of the spectral attenuation behavior. This study aims to combine ICESat-2 and Sentinel-2 optical data to derive shallow water bathymetry (depth <20 m) at six islands and reefs in the South China Sea. ICESat-2 ATL03 point clouds of georeferenced photons are first filtered to determine the seafloor elevation along the ground track. Results indicate a root-mean-square error (RMSE) of 0.26–0.61 m as compared with independent observations from an airborne LiDAR campaign. Next, three semi-empirical functions, namely the Modified Linear/Polynomial/Exponential Ratio Models with its kernel formed by the log ratio between Sentinel-2′s green and blue bands, are used to fit the spectral data with ICESat-2 height profiles. After water depth mapping using the trained model, independent ICESat-2 point clouds are used to validate the Sentinel-2 derived bathymetry. The RMSE values of the three models using the weighted average of multiple images for these six islands are within 0.50–0.90 m in 0–15 m deep. We also demonstrate that a synthesis of satellite laser altimetry and optical remote sensing can produce SDB results that potentially meet the requirement of category C in Zones of Confidence (ZOC) of the Electronic Navigational Chart (ENC) in 0–8 m deep. It is foreseen that ICESat-2 will be a helpful tool for mapping coastal and shallow waters around the world especially where bathymetric data are unavailable.

Coastal Bathymetry↗
NASA NTRS1992

SAGE II stratospheric density and temperature retrieval experiment

This paper describes a stratospheric density and temperature retrieval experiment based on the solar occultation measurement of the Stratospheric Aerosol and Gas Experiment (SAGE II). The entire retrieval analysis involves two inversion steps: the vertical structure inversion, which derives the profile of local atmospheric extinction from SAGE II limb optical depth data, and the species inversion, which inverts the concentration of air molecules, aerosols, ozone, and nitrogen dioxide from the derived atmospheric extinction at five SAGE II short wavelengths (0.385, 0.448, 0.453, 0.525, and 0.600 microns). The derived density profile is then used to infer the temperature distribution, assuming that the atmosphere is in hydrostatic equilibrium and obeys the ideal gas law. The temperature profiles retrieved from the SAGE II observations are compared with near-coincident, in both time and space, French Rayleigh lidar and NASA Wallops Flight Facility rocket datasonde soundings as well as the National Meteorological Center (NMC) data analyses. The results indicate that the mean SAGE II temperature agrees with the mean lidar measurements to within 2 C at altitudes from 30.5 to 52.5 km. The SAGE II and datasonde observations agree to within about 4 C in approximately the same altitude region.

Wang, Pi-Huan↗
DOE OSTI2022

Seismic monitoring of CO 2 geosequestration using multi-well 4D DAS VSP: Stage 3 of the CO2CRC Otway project

An important part of any CO 2 geosequestration project is to ensure CO 2 containment and conformance in the subsurface. This is generally done by implementing a comprehensive, risk-based Measurement, Monitoring and Verification plan, a key element of which is active time-lapse seismic monitoring. However, high cost and environmental impact of the standard surface seismic monitoring dictate the need for a cost-effective and environmentally friendly alternative. An opportunity to develop such method emerges with advances in distributed acoustic sensing (DAS) technology, which turns an optical fibre into a seismic sensor with dense spatial sampling. DAS can be permanently deployed in multiple wells across the geosequestration site providing a robust and non-intrusive network of seismic receivers. This approach was developed and tested in the CO2CRC Otway project, where injection of 15 kt of CO 2 at 1.5 km depth was monitored with a 4D vertical seismic profiling (VSP) using five borehole DAS arrays and mobile vibroseis sources. The 4D DAS VSP in each of the five wells provides broadly consistent images of the CO 2 plume with some differences due to different illumination of the target horizon, lateral variation of velocities, and seismic anisotropy. When the newly injected CO 2 reaches a CO 2 plume created as a result of an earlier injection into the same formation ~600 m updip, 4D DAS VSP shows a change in reflectivity in that area and beyond. Furthermore, this shows a potential of 4D DAS VSP for monitoring gas injection into gas-saturated reservoirs.

58 GEOSCIENCES↗
DOE OSTI2026

UV–Vis–NIR Reflectance Spectroscopy and Chemometrics for Monitoring Pu Directly on an Ion Exchange Column

Here, we present a fiber-optic UV–vis–NIR reflectance spectroscopy method for direct, noninvasive monitoring of Pu(IV) in a glass ion exchange column during dynamic loading and elution in a glovebox. A movable probe enables spatially resolved spectral acquisition along the column axis, capturing distinct features associated with Pu(IV) nitrate complexes during loading and free ions during elution. Principal component analysis was applied to extract the dominant spectral variance and resolve relative concentration profiles without requiring precise knowledge of optical penetration depth or species identity. This in situ approach reveals spatial gradients and speciation dynamics in real time, which provides actionable insight into Pu(IV) ion migration, resin saturation, and breakthrough behavior under evolving flow conditions. The method offers a practical, fiber-compatible strategy to monitor glass column–based separations for Pu and other lanthanides or actinides and to characterize metal–resin interactions in flow-through systems.

actinide↗
DOE OSTI2023

Linking Stream Chemistry to Subsurface Redox Architecture

As drinking-water scarcity grows worldwide, we need to improve predictions of the quantity and quality of our water resources. An overarching problem for model improvement is that we do not know the geological structure of aquifers in sufficient detail. In this work, we demonstrate that mineral-water reactions imprint structure in the subsurface that impacts the flow and transport of some chemical species. Specifically, pyrite, a ubiquitous mineral, commonly oxidizes and depletes in the upper layers of the weathering profile in most humid watersheds, only remaining at depths of meters. We hypothesize that variations in concentrations (C) of pyrite-derived sulfate released into rivers as a function of discharge (q) reflect the rate-limiting step and depth of pyrite-oxidizing layers. We found that log C - log q behaviors thus differ in small and large watersheds in the Susquehanna River Basin as well as in selected watersheds in the Western United States. Although coal mining changes pyrite oxidation from closed to open system with respect to O 2 , patterns in stream chemistry as a function of discharge are consistent with deep and shallow pyrite oxidation zones in small and large watersheds respectively. Therefore, understanding the subsurface patterns of mineral reactions and how they affect the architecture of aquifers will elucidate patterns of changing river chemistry and our ability to manage water resources in the future under accelerated land use and climate change.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1973

Contact thermal conductivity in lunar aggregates.

The contribution of the contact conductivity to the thermal conductivity in aggregates is found to depend on pressure with an exponent greater than 1/3 and, for a specific model with an exponent of 3/5, when the particle packing is irregular. A lunar thermal conductivity profile near the surface, including a term involving depth to the 3/5 power, is considered.

Pilbeam, C. C.↗
NASA NTRS1974

Identification characteristics of certain lunar relief forms on pictures obtained from spacecraft

This investigation was restricted to the determination of recognitional characteristics of a single type of relief form, dimple craters on the surface of maria. These craters were arbitrarily considered as closed, negative relief forms, circular in plan-view, and symmetric relative to the center. Two techniques were used to determine the shadow configuration in the craters: (1) experimental determination of the shadow edge by illuminating the models of different profile shapes with a parallel light beam; and (2) geometric construction of the shadow edge using a vertical section of the formation in the direction of the solar rays. A morphological map of the surface which includes the following factors can be compiled using the proposed identification technique: crater profile nature, crater diameter, ratio of diameter and depth, sharpness of the lip, and distribution density of the forms.

Kravtsova, V. I.↗
NASA NTRS1980

Depositional and irradiational history of the Hadley Rille core 15010/11

Soils from the 15010/11 double drive tube collected at the edge of Hadley Rille have been analyzed for FeO concentrations, I(s)/FeO maturity index values, and noble gas isotopic abundances. Cosmogenic noble gases indicate a total cosmic ray exposure age of less than about 300 million years for the core soils, and it is found that while the production profile of these gases as a function of depth is not consistent with single-stage, in situ irradiation, it is in keeping with pre-irradiated soils deposited or exposed within the past 100 million years. Although significant isotopic differences due to mass fractionation exist on the lunar surface, the solar noble gases in most core soils show little or no evidence of long-term isotopic changes.

Bogard, D. D.↗