Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data- limited”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

3D CFD Model Validation Using Benchmark Data of 1/16th Scaled VHTR Upper Plenum and Development of Wall Heat-Transfer Correlation For Laminar Flow

With support from the U.S. Department of Energy-Office of Nuclear Energy’s (DOE-NE’s) Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, an effort has been pursued to support high-temperature gas-cooled reactor (HTGR) technology development and its modeling and simulation needs. There is a particular need for advanced modeling and simulation tools to predict thermal-fluid behavior in the nuclear reactor primary system, especially in the core and the lower and upper plena, during safety-related transients. In this report, two main such activities are presented relevant to the HTGRs: (1) three-dimensional (3D) computational fluid dynamics (CFD) validation using benchmark data from the upper plenum of Texas A&M University’s 1/16th scaled very-high-temperature gas-cooled reactor (VHTR), and (2) development of wall heat-transfer correlation for laminar flow in a wall-heated pipe. The CFD tool validation exercises can be helpful to choose the models and CFD tools to simulate and design specific components of the HTRGs such as upper plenum where jet mixing is a complex phenomenon. In a loss of forced circulation event, the laminar flow can be observed during the development of natural circulation flow. This work includes the development and validation of heat transfer correlations for laminar flow using the Nek5000 CFD code due to limited available experimental data for laminar flow conditions to guide low-order models (1D). In this report, the flow characteristics of a single isothermal jet discharging into the upper plenum was investigated using the Nek5000 Large-Eddy Simulation (LES) CFD tool. Several numerical simulations were performed for various jet-discharged Reynolds numbers ranging from 3,413 to 12,819. A grid-independent study was performed. The numerical results of mean velocity, root-mean-square fluctuating velocity, and Reynolds stress were compared against the benchmark data. Good agreement was obtained between simulated and measured data for axial mean velocities, except near the upper plenum hemisphere. The maximum predicted errors for axial mean velocities at various normalized coolant channel diameter heights of 1, 5, and 10 are 1.56%, 1.88%, and 3.82%, respectively. In addition, the predicted root-mean-square fluctuating velocity and Reynolds stress are qualitatively in agreement with the experimental data. The Nek5000 code was used to develop wall-heat transfer correlation for laminar flow in a cylindrical tube. Several simulations were performed for various Reynolds flow and wall-heat fluxes. A new heat transfer correlation was developed using data from Nek5000 simulation results and regression functions in Matlab. The developed heat transfer correlation is valid for various Reynolds flows from 200 to 2000. The predicted R² value for model fit was 0.875, which ensures that 87.5% of the model data lies on the Nek5000 data. Moreover, a machine learning (ML) tool was used to train and test the Nek5000 data. A good fit of the ML-based model was observed with the test data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Density estimation via measure transport: Outlook for applications in the biological sciences

Abstract One among several advantages of measure transport methods is that they allow or a unified framework for processing and analysis of data distributed according to a wide class of probability measures. Within this context, we present results from computational studies aimed at assessing the potential of measure transport techniques, specifically, the use of triangular transport maps, as part of a workflow intended to support research in the biological sciences. Scenarios characterized by the availability of limited amount of sample data, which are common in domains such as radiation biology, are of particular interest. We find that when estimating a distribution density function given limited amount of sample data, adaptive transport maps are advantageous. In particular, statistics gathered from computing series of adaptive transport maps, trained on a series of randomly chosen subsets of the set of available data samples, leads to uncovering information hidden in the data. As a result, in the radiation biology application considered here, this approach provides a tool for generating hypotheses about gene relationships and their dynamics under radiation exposure.

gene expression data↗
DOE OSTI2021

Geostatistical interpolation of streambed hydrologic attributes with addition of left censored data and anisotropy

Spatial geostatistical interpolation of point measurements of streambed attributes in the hyporheic zone may be constrained by the streambed anisotropy, and data density and spatial distribution may significantly impact the results. Spatial clustering and low spatial data density can be caused by bedrock outcropping at the streambed limiting installation of in-stream piezometers. This study examines parameter error variability of the geostatistical interpolation using anisotropic interpolation methods and increasing the data density by adding left censored values (i.e., data below measurement limit) to locations where measurements were limited by exposed bedrock lining the streambed. The reduction in relative standard error of the interpolation was determined for the spatial distributions of streambed attributes including hydraulic conductivity, seepage flux, and mercury solute flux measured in two different years along a study reach in East Fork Poplar Creek, Tennessee, USA. Here, two methods to impute the left censored values were compared including the conventional half the detection limit substitution method, and the Stochastic Approximation of Expectation-Maximization (SAEM) algorithm, which both had comparable results. Imputing left censored data increased the data density to recommended ranges, reduced data clustering, increased the spatial dependence for some attributes, and reduced the standard error for each of the three attributes. For the reach considered herein, addition of the left censored values resulted in a larger error reduction than the consideration of anisotropy within the interpolation, which confirms the benefit of data addition to increase data density within data-limited river corridors.

58 GEOSCIENCES↗
DOE OSTI2025

Scalable Hybrid Learning Techniques for Scientific Data Compression

Data compression is becoming critical for storing scientific data because many scientific applications need to store large amounts of data and post process this data for scientific discovery. Unlike image and video compression algorithms that limit errors to primary data (PD), scientists require compression techniques that accurately preserve derived quantities of interest (QoIs). Here, this article presents a physics-informed compression technique implemented as an end-to-end, scalable, GPU-based pipeline for data compression that addresses this requirement. Our hybrid compression technique combines machine learning techniques and standard compression methods. Specifically, we combine an autoencoder, an error-bounded lossy compressor to provide guarantees on raw data error, and a constraint satisfaction post-processing step to preserve the QoIs within a minimal error (generally less than floating point error). The effectiveness of the data compression pipeline is demonstrated by compressing nuclear fusion simulation data generated by a large-scale fusion code, XGC, which produces hundreds of terabytes of data in a single day. Our approach works within the ADIOS framework and results in compression by a factor of more than 150 while requiring only a few percent of the computational resources necessary for generating the data, making the overall approach highly effective for practical scenarios.

ITER↗
DOE OSTI2022

The safety of pranlukast and montelukast during the first trimester of pregnancy: A prospective, two‐centered cohort study in Japan

Abstract For leukotriene receptor antagonists (LTRAs), especially pranlukast, safety data during pregnancy is limited. Therefore, we conducted a prospective, two‐centered cohort study using data from teratogen information services in Japan to clarify the effects of LTRA exposure during pregnancy on maternal and fetal outcomes. Pregnant women who being counseled on drug use during pregnancy at two facilities were enrolled. The primary outcome of this study was major congenital anomalies. The incidence of major congenital anomalies in women exposed to montelukast or pranlukast during the first trimester of pregnancy was compared with that of controls. Logistic regression analysis was performed to analyze the effects of maternal LTRA use during the first trimester of pregnancy on major congenital anomalies. The outcomes of 231 pregnant women exposed to LTRAs (montelukast n = 122; pranlukast n = 106; both n = 3) and 212 live births were compared with those of controls. The rate of major congenital anomalies in the LTRA group was 1.9%. Multivariable logistic regression analysis revealed that LTRA exposure was not a risk factor for major congenital anomalies (adjusted odds ratio, 0.78; 95% confidence interval, 0.23–2.05; p = 0.653). In addition, no significant difference was detected in stillbirth, spontaneous abortion, preterm birth, and low birth weight between the two groups. The present study revealed that montelukast and pranlukast were not associated with the risk of major congenital anomalies. Our findings suggest that LTRAs could be safely employed for asthma therapy during pregnancy.

Hatakeyama, Shiro↗
DOE OSTI2020

Stochastic Simulation of Daily Suspended Sediment Concentration Using Multivariate Copulas

Estimation of daily suspended sediment concentration (SSC) is required for water resources and environment management. In this paper, a copula-based stochastic method was proposed for daily SSC simulation. Here, the multivariate copula function, constructed based on a bivariate copula and two bivariate conditional probability distributions, was used to model the temporal and cross dependence structures in daily SSCs. Then, the daily SSCs were generated by sampling from the multivariate conditional distribution. As a result, synthetic long-term SSCs data beyond the limited observation period can be provided for water resources managers, which plays a critical role in accurately estimating frequency and magnitude of extreme SSCs events. The proposed method was under rigorous examination by applying to a case study at Pingshan station in the Jinsha River Basin, China. Results showed that the generated daily SSC sequences not only had a high degree of accuracy in preserving the statistical characteristics of the daily SSC observations, but also captured both the temporal correlation and the cross-correlation between the daily streamflow and daily SSC. Specifically, the average daily relative error values corresponding to mean, standard deviation, skewness, lag-1 temporal correlation, and cross correlation were 0.87%, 4.24%, 7.52%, 0.51% and 2.02%, respectively. The multivariate copula framework proposed here can accurately and efficiently generate long-term daily SSC data for water resources management such as frequency analysis and risk assessment of extreme SSC events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Isopropanol dehydration reaction rate kinetics measurement using H 2 O time histories

H 2 O formation during thermal decomposition of isopropanol was measured behind reflected shock waves at temperatures ranging from 1127 to 1621 K at an average pressure of 1.42 atm using a laser absorption technique. Of the five modern chemical kinetics models used to compare the H 2 O time histories, the model from Li et al (Combust. Flame 2019;207:171-185) showed the best overall agreement. Sensitivity and rate of production analyses using the Li et al model (as well as those from AramcoMech 3.0, CRECK, and Togbe et al (Energy Fuel. 2011;25:676-683)) showed unimolecular dehydration of isopropanol, iC 3 H 7 OH ⇌ H 2 O + C 3 H 6 (R1), is nearly the sole reaction controlling H2O production at early times, allowing for an a priori measurement of the forward rate constant k 1 . The Arrhenius expression k1 (s –1 ) = 2.60 × 10 13 exp(-31 120 K/T) was determined to represent best the data from this study. According to the models and previous experimental investigations, the pressure investigated is well within the high-pressure limit (HPL) for this reaction. Additional, higher-pressure experiments also confirmed the HPL assumption. An uncertainty analysis was performed by varying secondary reactions within their uncertainties and examining their effect on the overall prediction, establishing an uncertainty within ±20% for all but the highest temperature cases, which have a maximum uncertainty of ±40%. Experiments conducted with a radical trapper, toluene, showed little influence from radical chemistry, suggesting this estimated uncertainty is fairly conservative. Experimental data from Heyne et al (Z Phys Chem. 2015;229:881-907) were found to be in good agreement with the rate measurements from this study and, therefore, a second Arrhenius expression, k 1 (s –1 ) = 2.11 × 10 13 exp(-30 820 K/T), was found to represent both datasets well. This second expression has a larger temperature range of 976-1621 K. Here the present study provides the first high-temperature data collected for this reaction, adding to the limited data available for isopropanol in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ordovician-Cambrian Units: Hierarchical Evaluation of Geologic Carbon Storage Resource Estimates

The Indiana Geological and Water Survey (IGWS) led subtask 1.1 to assess the regional distribution and estimate the storage capacity of Ordovician-Cambrian stratigraphic units located within the partnership region. A comprehensive data set of wireline logs and petrophysical information was used to generate these interpretations. These data include core analysis for porosity and permeability, mercury injection capillary pressure (MICP), and existing well data including location and stratigraphic information. This report includes storage resource estimates (SREs) for three potential storage reservoirs(limestone and dolostone from the Upper Ordovician Trenton Limestone/Black River Group and equivalent units, the Middle Ordovician St. Peter Sandstone, and primary target reservoir rocks of the Lower Ordovician and Upper Cambrian Knox Supergroup and equivalent units) calculated using six methodologies: (1) a fixed value of porosity of 10 percent in all units evaluated; (2) a unique average porosity (per well) from wireline-derived porosity (neutron, sonic, and/or density porosity for each unit); (3) porosity values from core analysis; (4) a depth-dependent porosity model (Knox Supergroup only); (5) porosity based on a model based on petrophysical facies; and (6) SREs using National Energy Technology Laboratory’s CO2 Storage prospeCtive Resource Estimation Excel aNalysis (CO2-SCREEN beta V2). All methods used the same values for thickness for each unit. However, the areal extent of each assessment was limited by the data available for each method. Estimated volumes were calculated in 1-by-1 kilometer grid cells and summarized as county and total stratigraphic unit volumes. The resultant SREs mass are displayed using boxplots, which allow for comparing data statistics (mean values and variability) between methods. Differences observed in SRE results from the six methods are mainly attributable to differences in the data and conceptual models used to interpret or estimate porosity in each method. Based on this systematic variability between methods, it is inferred that methods 1, 4, and 6 are best used for regional-scale reconnaissance estimates of storage capacity while methods 2, 3, and 5 are more appropriate for local scales where more data is required. All estimates are data-density dependent and different methods require different amounts of data for reasonable assessments. ArcMap 10.5.1 software was used to portray SREs to help visualize spatial variance of estimates for each methodology, and more importantly, to highlight those areas having the greatest total storage potential estimates.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Super-Resolution Ptychography with Small Segmented Detectors

To overcome the spatial resolution limit set by aperture-limited diffraction in traditional scanning transmission electron microscopy, microscopists have developed ptychography enabled by iterative phase retrieval algorithms and high-dynamic-range pixel array detectors. Current detector designs are limited by the data rate off chip, so a high-pixel-count detector has a proportionally lower frame rate than the few-segment detectors used for differential phase contrast (DPC) imaging. This slower acquisition speed leads to heightened vulnerability to scan noise, drift, and potential sample damage. This creates opportunities for repurposing fast segmented detectors for ptychography by trading a reduction in reciprocal space pixels for an increase in real space pixels. Here, we explore a strategy of oversampling in real space and instead apply detector pixel upsampling during the reconstruction process. Further, we demonstrate the viability of achieving super-resolution ptychography on thin objects using only 2 × 2 detector pixels, surpassing the resolution of integrated DPC (iDPC) imaging. With optimization using simulated datasets and experiments on MoTe 2 /WSe 2 bilayer moiré superlattices, we achieved super-resolution ptychography reconstructions under rapid acquisition conditions (37.5 pA, 1 μs dwell time), yielding over 50% improvements in contrast and information limit compared to annular dark field and iDPC imaging on the same detectors.

2D materials↗
DOE OSTI2020

Mitigation of LEO Satellite Brightness and Trail Effects on the Rubin Observatory LSST

In this work, we report studies on the mitigation of optical effects of bright low-Earth-orbit (LEO) satellites on Vera C. Rubin Observatory and its Legacy Survey of Space and Time (LSST). These include options for pointing the telescope to avoid satellites, laboratory investigations of bright trails on the Rubin Observatory LSST camera sensors, algorithms for correcting image artifacts caused by bright trails, experiments on darkening SpaceX Starlink satellites, and ground-based follow-up observations. The original Starlink v0.9 satellites are g ~ 4.5 mag, and the initial experiment "DarkSat" is g ~ 6.1 mag. Future Starlink darkening plans may reach g ~ 7 mag, a brightness level that enables nonlinear image artifact correction to well below background noise. However, the satellite trails will still exist at a signal-to-noise ratio ~ 100, generating systematic errors that may impact data analysis and limit some science. For the Rubin Observatory 8.4 m mirror and a satellite at 550 km, the full width at half maximum of the trail is about 3'' as the result of an out-of-focus effect, which helps avoid saturation by decreasing the peak surface brightness of the trail. For 48,000 LEOsats of apparent magnitude 4.5, about 1% of pixels in LSST nautical twilight images would need to be masked.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Quantifying and Optimizing the Energy Benefits of Mass Timber Construction

The International Mass Timber Alliance (IMTA) is a global organization of industry leaders, engineers, scientists, and associations dedicated to advancing mass timber construction. Its mission is to generate and disseminate scientific data supporting the development of standardized construction and energy efficient practices that promote the adoption of mass timber worldwide. IMTA collaborated with Oak Ridge National Laboratory (ORNL) to leverage ORNL’s expertise in building envelope modeling and testing to evaluate how mass timber construction can reduce peak heating and cooling demand, lower overall energy use, and improve resilience during power outages. A previous study of 80 mass timber buildings in Finland found measured energy use up to 50% lower than predicted by simulation. This project aimed to validate and extend those findings for U.S. buildings through analytical modeling, laboratory testing, and full-scale building evaluations. The research focused on the thermal performance of low-embodied-energy wall assemblies, such as cross-laminated timber (CLT) panels and log walls, with particular attention to the effects of thermal inertia on indoor comfort and energy performance. While mass timber’s structural and fire-resistance properties are well documented, its whole-building thermal behavior has received limited attention. Field data, simulation results, and resilience testing from this study will inform future modeling practices, design guidelines, and construction practices by quantifying the unique thermal and demand-flexibility benefits of mass timber construction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

2016 Floodplain Geochemistry from the East River Watershed, Colorado

This dataset includes groundwater geochemistry data from floodplain piezometers collected as a part of the Watershed Function Scientific Focus Area (SFA) located in the Upper Colorado River Basin. The data were collected in order to investigate the role of hyporheic exchange and other river corridor processes on riverine export of solutes. Floodplain piezometers installed in several meanders (Meander C, Meander D, and Meander O) in the vicinity of the Pumphouse were sampled at several dates in 2016. Data includes in-field measurements (pH, electrical conductivity, oxidation reduction potential, dissolved oxygen, dissolved Fe(II), dissolved sulfide, and groundwater level) along with laboratory measurements (dissolved inorganic carbon, dissolved organic carbon, metals and major cations). Five files are included in this dataset, including: sample locations and depths in a csv file (metadata.csv), aqueous geochemistry data in a csv file, analytical detection limits in a csv file, a file-level metadata (flmd.csv) file, and a data dictionary (dd.csv) file. Data that was below the detection limit is reported as one half of the detection limit and missing data is listed as "-9999".

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

XXL-HSC: An updated catalogue of high-redshift ( z ≥ 3.5) X-ray AGN in the XMM-XXL northern field

X-rays offer a reliable method to identify active galactic nuclei (AGNs). However, in the high-redshift Universe, X-ray AGNs are poorly sampled due to their relatively low space density and the small areas covered by X-ray surveys. In addition to wide-area X-ray surveys, it is important to have deep optical data in order to locate the optical counterparts and determine their redshifts. Here, in this work, we built a high-redshift (z ≥ 3.5) X-ray-selected AGN sample in the XMM-XXL northern field using the most updated [0.5–2 keV] catalogue along with a plethora of new spectroscopic and multi-wavelength catalogues, including the deep optical Subaru Hyper Suprime-Cam (HSC) data, reaching magnitude limits i ~ 26 mag. We selected all the spectroscopically confirmed AGN and complement this sample with high-redshift candidates that are HSC g- and r-band dropouts. To confirm the dropouts, we derived their photometric redshifts using spectral energy distribution techniques. We obtained a sample of 54 high-z sources (28 with spec-z), the largest in this field so far (almost three times larger than in previous studies), and we estimated the possible contamination and completeness. We calculated the number counts (log N-log S) in different redshift bins and compared our results with previous studies and models. We provide the strongest high-redshift AGN constraints yet at bright fluxes (f 0.5 – 2 keV > 10 –15 erg s –1 cm –2 ). The samples of z ≥ 3.5, z ≥ 4, and z ≥ 5 are in agreement with an exponential decline model similar to that witnessed at optical wavelengths. Our work emphasises the importance of using wide-area X-ray surveys with deep optical data to uncover high-redshift AGNs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Machine Learning Inference of Random Medium Properties

Earth materials are heterogeneous across a range of spatial scales, but the resolvability of small structures is limited by sparse data coverage, noise, bandlimitedness, and other difficulties. In practice, heterogeneities below a certain size cannot be recovered from seismic data except through statistical medium descriptions, which even then can be difficult to uniquely determine. To improve the characterization of such heterogeneities, we develop a novel supervised machine learning (ML) model that provides insight about the recoverability of statistical medium properties from elastic waveform data and succeeds despite cycle-skipping and other challenges well known from elastic waveform inversion. We demonstrate the approach using random media generated by superimposing self-affine random variations on homogeneous and layered background structures. After training on sparsely-recorded, high-frequency waveforms from hundreds of different random medium realizations, we show the ability of our ML model to recover correlation lengths and other statistical properties of interest to near-surface and crustal seismology, among other fields. For frequency passbands and spatial offsets encountered in seismology, Gaussian correlation lengths and the amplitude of the random variations relative to the background model are recovered even in challenging scenarios involving unknown medium parameters, complex crustal structures, and low signal-to-noise ratio. In comparison, von Kármán correlation lengths, which are related to larger-wavelength variations of the medium than Gaussian correlation lengths, are not as well recovered. These results provide one of the first and most systematic investigations of the recoverability of statistical properties of heterogeneities below the resolution limit of deterministic seismic tomography, and suggest practical ML strategies for high-frequency waveform seismology.

58 GEOSCIENCES↗
DOE OSTI2025

Circularity Futures Workshop Series: Summary Report

The aim of this report is to synthesize key feedback received from the three-part Circularity Futures workshop series held in Spring 2024. The workshop series was conducted by the National Renewable Energy Laboratory (NREL) on behalf of U.S. Department of Energy, Office Energy Efficiency and Renewable Energy (EERE), and was broken into three workshops: Workshop 1 - Circularity Analysis Needs and Priorities; Workshop 2 - Circularity Metrics and Indicators; and Workshop 3 - Circularity Data. Together, the workshops focused on identifying the existing priorities and gaps in the circularity modeling space, understanding different stakeholders' use and interpretation of circularity metrics and indicators, identifying common data gaps and data quality challenges, and assessing the robustness of available solutions. The workshop series brought a diverse group of stakeholders - including representatives from U.S. government offices, national labs, nonprofit organizations, industry, and academia - to collect first-hand feedback on needs, priorities, challenges and opportunities in the circularity modeling and analysis space. The workshop discussions highlighted numerous common needs, priorities and challenges among the interviewed groups. Several topics were frequently discussed, including: 1) Circularity as a pathway for sustainable economic growth: While circularity is generally defined in terms of resource conservation and reducing wasteful disposal of materials, participants agreed that circular strategies should serve broader economic, environmental, and social goals. It is therefore crucial for circularity analysis to look beyond waste reduction and instead evaluate a variety of impact metrics such as cost savings, job creation, air quality, and pollutant emissions. Mutli-criteria decision-making frameworks may be useful for making sense of disparate metrics and evaluating tradeoffs between impact categories.; 2) Economic and social factors are not well understood: Underdevelopment of existing end-of-life (EOL) management infrastructure, inconsistent standardization codes and policy space in reusing recycled content, and suboptimal collection and sorting strategies collectively contribute to uncertainty about the economic potential of circular pathways. The latter observation is consistent among all technologies but more emphasized for renewable energy systems. Social impacts of circularity practices are less understood and less researched than other sustainability aspects.; 3) Inconsistent methods for assessing emerging technologies: LCA and TEA results vary widely depending on the assumptions made with regards to market adoption of new technologies. Emerging technologies suffer limited availability of data needed to conduct a robust circularity analysis. Yet, understanding projected impacts of proposed nascent technology is a key need for different stakeholder groups.; and 4) Lack of temporally and geospatially explicit data: There is a need for open data that represents variations in circularity technologies over time and location. The lack thereof leads to aggregated and potentially misrepresented results in circularity analysis. Sensitivity analyses should be included to verify whether options perceived as more sustainable align with real-world practices.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Aligned FTICR-MS, Respiration, and Biochemical Transformation Data from Columbia River Sediment Incubations Associated with: “Carbon Limitation Leads to Thermodynamic Regulation of Aerobic Metabolism”

Columbia River hyporheic zone sediments from the Hanford Site 300 Area in eastern Washington were incubated in a full factorial design with different organic matter (OM) amendments. The aim of the experiment was to test the influence of OM thermodynamics on aerobic respiration across different organic carbon pools and concentrations. This dataset is comprised of (1) a csv with high resolution characterization of dissolved organic matter via 12 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) analyzed through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory), (2) a csv with sample IDs, replicates, amendments, dissolved oxygen (DO) measurements, and sampling time points, (3) a csv with sample IDs, replicates, respiration rates, FTICR summary metrics, and relative abundance of chemical classes; and (4) a csv with the number of chemical transformations in each sample replicate (microcosm). The data are associated with the publication “Carbon Limitation Leads to Thermodynamic Regulation of Aerobic Metabolism” published in ES&T Letters (Garayburu-Caruso et al., 2020). Please use the data package’s DOI to cite the data package. We ask that you acknowledge the U.S. Department of Energy (DOE) Biological and Environmental Research (BER) Subsurface Biogeochemical Research (SBR) program when using the data. All data are free to be used for any purpose, such as for manuscripts, presentations, and grant proposals. There is no obligation to include data package authors as co-authors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

SALSA: a new versatile readout chip for MPGD detectors

The SALSA chip is a future readout ASIC foreseen for the MPGD detectors, developed in the framework of the EIC collider project, to equip the MPGD trackers of the EPIC experiment. It is designed to be versatile, to be adapted to other usages of MPGD detectors like TPC or photon detectors. It integrates a frontend block and an ADC for each of the 64 channels, associated to a configurable DSP processor meant to correct data and reduce the raw data flux to limit the output bandwidth. It will be compatible with the continuous readout foreseen for the EPIC DAQ, but will also work in a triggered environment. Several prototypes are already produced in order to qualify the different blocks of the chip, in particular the frontend, the ADC and the clock generation. The next 32-channel prototype is currently under development and is planed to be produced in 2025. In conclusion, the final prototype will be produced and tested from 2026 for a production of the SALSA chip at the horizon of 2027.

Data processing↗
DOE OSTI2024

Phase Selection Rules of Multi‐Principal Element Alloys

Abstract Computational prediction of phase stability of multi‐principal element alloys (MPEAs) holds a lot of promise for rapid exploration of the enormous design space and autonomous discovery of superior structural and functional properties. Regardless of many plausible works that rely on phenomenological theory and machine learning, precise prediction is still limited by insufficient data and the lack of interpretability of some machine learning algorithms, e.g., convolutional neural network. In this work, a comprehensive approach is presented, encompassing the development of a complete dataset that contains 72 387 density functional theory calculations, as well as a predictive global phenomenological descriptor. The phase selection descriptor, based on atomic electronegativity and valence electron concentration, significantly outperforms the widely used valence electron concentration, excelling in both accuracy (with an f1 score of 63% compared to 47%) and its ability to predict the HCP phase (0.48 recall compared to 0). The comprehensive data mining on the global design space of 61 425 quaternary MPEAs made from 28 possible metals, together with the phenomenological theory and physical interpretation, will set up a solid computational science foundation for data‐driven exploration of MPEAs.

Chemistry↗