Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data platform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Evaluation of Shortwave Infrared Atmospheric Correction for Ocean Color Remote Sensing of Chesapeake Bay

The NASA Moderate Resolution Imaging Spectroradiometer onboard the Aqua platform (MODIS-Aqua) provides a viable data stream for operational water quality monitoring of Chesapeake Bay. Marine geophysical products from MODIS-Aqua depend on the efficacy of the atmospheric correction process, which can be problematic in coastal environments. The operational atmospheric correction algorithm for MODIS-Aqua requires an assumption of negligible near-infrared water-leaving radiance, nL(sub w)(NIR). This assumption progressively degrades with increasing turbidity and, as such, methods exist to account for non-negligible nL(sub w)(NIR) within the atmospheric correction process or to use alternate radiometric bands where the assumption is satisfied, such as those positioned within shortwave infrared (SWIR) region of the spectrum. We evaluated a decade-long time-series of nL(sub w)(lambda) from MODIS-Aqua in Chesapeake Bay derived using NIR and SWIR bands for atmospheric correction. Low signal-to-noise ratios (SNR) for the SWIR bands of MODIS-Aqua added noise errors to the derived radiances, which produced broad, flat frequency distributions of nL(sub w)(lambda) relative to those produced using the NIR bands. The SWIR approach produced an increased number of negative nL(sub w)(lambda) and decreased sample size relative to the NIR approach. Revised vicarious calibration and regional tuning of the scheme to switch between the NIR and SWIR approaches may improve retrievals in Chesapeake Bay, however, poor SNR values for the MODIS-Aqua SWIR bands remain the primary deficiency of the SWIR-based atmospheric correction approach.

Werdell, P. Jeremy↗

Launch Vehicle Demonstrator Using Shuttle Assets

The Marshall Space Flight Center Advanced Concepts Office (ACO) has the leading role for NASA s preliminary conceptual launch vehicle design and performance analysis. Over the past several years the ACO Earth-to-Orbit Team has evaluated thousands of launch vehicle concept variations for a multitude of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). NASA plans to continue human space exploration and space station utilization. Launch vehicles used for heavy lift cargo and crew will be needed. One of the current leading concepts for future heavy lift capability is an inline one and a half stage concept using solid rocket boosters (SRB) and based on current Shuttle technology and elements. Potentially, the quickest and most cost-effective path towards an operational vehicle of this configuration is to make use of a demonstrator vehicle fabricated from existing shuttle assets and relying upon the existing STS launch infrastructure. Such a demonstrator would yield valuable proof-of-concept data and would provide a working test platform allowing for validated systems integration. Using shuttle hardware such as existing RS-25D engines and partial MPS, propellant tanks derived from the External Tank (ET) design and tooling, and four-segment SRB s could reduce the associated upfront development costs and schedule when compared to a concept that would rely on new propulsion technology and engine designs. There are potentially several other additional benefits to this demonstrator concept. Since a concept of this type would be based on man-rated flight proven hardware components, this demonstrator has the potential to evolve into the first iteration of heavy lift crew or cargo and serve as a baseline for block upgrades. This vehicle could also serve as a demonstration and test platform for the Orion Program. Critical spacecraft systems, re-entry and recovery systems, and launch abort systems of Orion could also be demonstrated in early test flights of the launch vehicle demo. Furthermore, an early demonstrator of this type would provide a stop-gap for retaining critical human capital and infrastructure while affording the current emerging generation of young engineers opportunity to work with and capture lessons learned from existing STS program offices and personnel, who were integral in the design and development of the Space Shuttle before these resources are no longer available. The objective of this study is to define candidate launch vehicle demonstration concepts that are based on Space Shuttle assets and determine their performance capabilities and how these demonstration vehicles could evolve to a heavy lift capability to low earth orbit.

Threet, Grady E., Jr.↗

Lidar Remote Sensing for Characterizing Forest Vegetation - Special Issue. Foreword

The Silvilaser 2009 conference held in College Station, Texas, USA, was the ninth conference in the Silvilaser series, which started in 2002 with the international workshop on using lidar (Light Detection and Ranging) for analyzing forest structure, held in Victoria, British Columbia, Canada. Following the Canadian workshop, subsequent forestry-lidar conferences took place in Australia, Sweden, Germany, USA, Japan, Finland, and the United Kingdom (UK). By the time this Silvilaser 2009 special issue of PE&RS is published, the 10th international conference will have been held in Freiburg, Germany, and planning will be ongoing for the 11th meeting to take place in Tasmania, Australia, in October 2011. Papers presented at the 2005 conference held in Blacksburg, Virginia, USA, were assembled in a special issue of PE&RS published in December 2006. Other special issues resulting from previous conferences were published in journals such as the Canadian Journal of Remote Sensing (2003), the Scandinavian Journal of Forest Research (2004), and Japan s Journal of Forest Planning (2008). Given the conference history and the much longer record of publications on lidar applications for estimating forest biophysical parameters, which dates back to the early 1980s, we may consider lidar an established remote sensing technology for characterizing forest canopy structure and estimating forest biophysical parameters. Randy Wynne, a professor at Virginia Tech and the final keynote speaker at Silvilaser 2009, made the case that it was time to push 30 years of research into operations, along the lines of what has already been done to good effect in the Scandinavian countries. In Randy s words, it s time to "Just do it!" This special issue includes a selection of papers presented during the 2009 Silvilaser conference, which consisted of eight sections as follows: (1) biomass and carbon stock estimates, (2) tree species and forest type classification, (3) data fusion and integration, (4, 5, and 6) forest inventory, (7) silvicultural and ecological applications, and (8) terrestrial lidar applications. Within the constraint limiting the number of papers that could be fitted into the special issue we attempted to select those papers that best represented these conference topics and sections, giving special consideration to studies using forestry lidar data collected from each of the three platforms -- terrestrial, airborne, and spaceborne. Reflecting the international participation and reach of the conference, the studies presented here took place in the USA, Canada, Taiwan, the UK, and China.

Popescu, Sorin C.↗

Overview of the 2010 Carbonaceous Aerosols and Radiative Effects Study (CARES)

Substantial uncertainties still exist in the scientific understanding of the possible interactions between urban and natural (biogenic) emissions in the production and transformation of atmospheric aerosol and the resulting impact on climate change. The US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program's Carbonaceous Aerosol and Radiative Effects Study (CARES) carried out in June 2010 in Central Valley, California, was a comprehensive effort designed to improve this understanding. The primary objective of the field study was to investigate the evolution of secondary organic and black carbon aerosols and their climate-related properties in the Sacramento urban plume as it was routinely transported into the forested Sierra Nevada foothills area. Urban aerosols and trace gases experienced significant physical and chemical transformations as they mixed with the reactive biogenic hydrocarbons emitted from the forest. Two heavily-instrumented ground sites - one within the Sacramento urban area and another about 40 km to the northeast in the foothills area - were set up to characterize the evolution of meteorological variables, trace gases, aerosol precursors, aerosol size, composition, and climaterelated properties in freshly polluted and "aged" urban air. On selected days, the DOE G-1 aircraft was deployed to make similar measurements upwind and across the evolving Sacramento plume in the morning and again in the afternoon. The NASA B-200 aircraft, carrying remote sensing instruments, was also deployed to characterize the vertical and horizontal distribution of aerosols and aerosol optical properties within and around the plume. This overview provides: (a) the scientific background and motivation for the study, (b) the operational and logistical information pertinent to the execution of the study, (c) an overview of key observations and initial findings from the aircraft and ground-based sampling platforms, and (d) a roadmap of planned data analyses and focused modeling efforts that will facilitate the integration of new knowledge into improved representations of key aerosol processes and properties in climate models.

aerosols↗

Geospatial Modeling of Asthma Population in Relation to Air Pollution

Current observations indicate that asthma is growing every year in the United States, specific reasons for this are not well understood. This study stems from an ongoing research effort to investigate the spatio-temporal behavior of asthma and its relatedness to air pollution. The association between environmental variables such as air quality and asthma related health issues over Mississippi State are investigated using Geographic Information Systems (GIS) tools and applications. Health data concerning asthma obtained from Mississippi State Department of Health (MSDH) for 9-year period of 2003-2011, and data of air pollutant concentrations (PM2.5) collected from USEPA web resources, and are analyzed geospatially to establish the impacts of air quality on human health specifically related to asthma. Disease mapping using geospatial techniques provides valuable insights into the spatial nature, variability, and association of asthma to air pollution. Asthma patient hospitalization data of Mississippi has been analyzed and mapped using quantitative Choropleth techniques in ArcGIS. Patients have been geocoded to their respective zip codes. Potential air pollutant sources of Interstate highways, Industries, and other land use data have been integrated in common geospatial platform to understand their adverse contribution on human health. Existing hospitals and emergency clinics are being injected into analysis to further understand their proximity and easy access to patient locations. At the current level of analysis and understanding, spatial distribution of Asthma is observed in the populations of Zip code regions in gulf coast, along the interstates of south, and in counties of Northeast Mississippi. It is also found that asthma is prevalent in most of the urban population. This GIS based project would be useful to make health risk assessment and provide information support to the administrators and decision makers for establishing satellite clinics in future.

Kethireddy, Swatantra R.↗

Airborne Measurements in Support of the NASA Atmospheric Carbon and Transport - America (ACT-America) Mission

NASA announced the research opportunity Earth Venture Suborbital -2 (EVS-2) mission in support of the NASA's science strategic goals and objectives in 2013. Penn State University, NASA Langley Research Center (LaRC), and other academic institutions, government agencies, and industrial companies together formulated and proposed the Atmospheric Carbon and Transport -America (ACT -America) suborbital mission, which was subsequently selected for implementation. The airborne measurements that are part of ACT-America will provide a unique set of remote and in-situ measurements of CO2 over North America at spatial and temporal scales not previously available to the science community and this will greatly enhance our understanding of the carbon cycle. ACT -America will consist of five airborne campaigns, covering all four seasons, to measure regional atmospheric carbon distributions and to evaluate the accuracy of atmospheric transport models used to assess carbon sinks and sources under fair and stormy weather conditions. This coordinated mission will measure atmospheric carbon in the three most important regions of the continental US carbon balance: Northeast, Midwest, and South. Data will be collected using 2 airborne platforms (NASA Wallops' C-130 and NASA Langley's B-200) with both in-situ and lidar instruments, along with instrumented ground towers and under flights of the Orbiting Carbon Observatory (OCO-2) satellite. This presentation provides an overview of the ACT-America instruments, with particular emphasis on the airborne CO2and backscatter lidars, and the, rationale, approach, and anticipated results from this mission.

Meadows, Byron↗

Investigating Ozone Sources in California Using AJAX Airborne Measurements and Models: Implications for Stratospheric Intrusion and Long Range Transport

High ozone concentrations at low altitudes near the surface were detected from airborne Alpha Jet Atmospheric eXperiment (AJAX) measurements on May 30, 2012. We investigate the causes of the elevated ozone concentrations using the airborne measurements and various models. GEOSchem and WRF-STILT model simulations show that the contribution from local sources is small. From MERRA reanalysis, it is found that high potential vorticity (PV) is observed at low altitudes. This high PV appears to be only partially coming through the stratospheric intrusions because the air inside the high PV region is moist, which shows that mixing appears to be enhanced in the low altitudes. Considering that diabatic heating can also produce high PV in the lower troposphere, high ozone is partially coming through stratospheric intrusion, but this cannot explain the whole ozone concentration in the target areas of the western U.S. A back-trajectory model is utilized to see where the air masses originated. The air masses of the target areas came from the lower stratosphere (LS), upper (UT), mid- (MT), and lower troposphere (LT). The relative number of trajectories coming from LS and UT is low (7.7% and 7.6%, respectively) compared to that from LT (64.1%), but the relative ozone concentration coming from LS and UT is high (38.4% and 20.95%, respectively) compared to that from LT (17.7%). The air mass coming from LT appears to be mostly coming from Asia. Q diagnostics show that there is sufficient mixing along the trajectory to indicate that ozone from the different origins is mixed and transported to the western U.S. This study shows that high ozone concentrations can be detected by airborne measurements, which can be analyzed by integrated platforms such as models, reanalysis, and satellite data.

gas composition↗

Investigation of Ozone Sources in California Using AJAX Airborne Measurements and Models: Implications for Stratospheric Intrusion and Long Range Transport

High ozone concentrations at low altitudes near the surface were detected from airborne Alpha Jet Atmospheric eXperiment (AJAX) measurements on May 30, 2012. We investigate the causes of the elevated ozone concentrations using the airborne measurements and various models. GEOS-chem and WRF-STILT model simulations show that the contribution from local sources is small. From MERRA reanalysis, it is found that high potential vorticity (PV) is observed at low altitudes. This high PV appears to be only partially coming through the stratospheric intrusions because the air inside the high PV region is moist, which shows that mixing appears to be enhanced in the low altitudes. Considering that diabatic heating can also produce high PV in the lower troposphere, high ozone is partially coming through stratospheric intrusion, but this cannot explain the whole ozone concentration in the target areas of the western U.S. A back-trajectory model is utilized to see where the air masses originated. The air masses of the target areas came from the lower stratosphere (LS), upper (UT), mid- (MT), and lower troposphere (LT). The relative number of trajectories coming from LS and UT is low (7.7 and 7.6, respectively) compared to that from LT (64.1), but the relative ozone concentration coming from LS and UT is high (38.4 and 20.95, respectively) compared to that from LT (17.7). The air mass coming from LT appears to be mostly coming from Asia. Q diagnostics show that there is sufficient mixing along the trajectory to indicate that ozone from the different origins is mixed and transported to the western U.S. This study shows that high ozone concentrations can be detected by airborne measurements, which can be analyzed by integrated platforms such as models, reanalysis, and satellite data.

low altitude↗

Comparison of Sun-Induced Chlorophyll Fluorescence Estimates Obtained from Four Portable Field Spectroradiometers

Remote Sensing of Sun-Induced Chlorophyll Fluorescence (SIF) is a research field of growing interest because it offers the potential to quantify actual photosynthesis and to monitor plant status. New satellite missions from the European Space Agency, such as the Earth Explorer 8 FLuorescence EXplorer (FLEX) mission-scheduled to launch in 2022 and aiming at SIF mapping-and from the National Aeronautics and Space Administration (NASA) such as the Orbiting Carbon Observatory-2 (OCO-2) sampling mission launched in July 2014, provide the capability to estimate SIF from space. The detection of the SIF signal from airborne and satellite platform is difficult and reliable ground level data are needed for calibration/validation. Several commercially available spectroradiometers are currently used to retrieve SIF in the field. This study presents a comparison exercise for evaluating the capability of four spectroradiometers to retrieve SIF. The results show that an accurate far-red SIF estimation can be achieved using spectroradiometers with an ultrafine resolution (less than 1 nm), while the red SIF estimation requires even higher spectral resolution (less than 0.5 nm). Moreover, it is shown that the Signal to Noise Ratio (SNR) plays a significant role in the precision of the far-red SIF measurements.

Julitta, Tommaso↗

The TASAR Project: Launching Aviation on an Optimized Route Toward Aircraft Autonomy

The Traffic Aware Strategic Aircrew Request (TASAR) concept applies onboard automation for the purpose of advising the pilot of route modifications that would be beneficial to the flight. Leveraging onboard computing platforms with connectivity to avionics and diverse data sources on and off the aircraft, TASAR introduces a new, powerful capability for in-flight trajectory management to the cockpit and its flight crew that is anticipated to induce a significant culture change in airspace operations. Flight crews empowered by TASAR and its derivative technologies could transform from today’s flight plan followers to proactive trajectory managers, taking an initial critical step towards increasing autonomy in the airspace system. TASAR was developed as a catalyst for operational autonomy, a future vision where the responsibilities and authorities of trajectory management reside with the aircraft operator and are distributed among participating aircraft, thus fulfilling a vision dating back decades and enabling a fully scalable airspace system. This NASA Technical Paper maps TASAR to its foundational vision and traces its research and development from initial concept generation to an operational evaluation by a U.S. airline in revenue service, the final stage before technology transfer and commercialization.

Wing, David J.↗

Southern Rockies Western Slope Agriculture: Identifying Drivers of Rangeland Production for Drought Planning on the Western Slope of the Southern Rockies

Over the last decade, the southern Rocky Mountains of the United States have experienced increasingly severe and variable drought. Local ranchers and landowners have reported strain on their operations, citing decreasing forage production for their cattle and a need to adjust their business models, even considering abandoning their businesses altogether. The study identified Major Land Resource Area-48 (MLRA-48) and northwestern Colorado as the key region for analysis. NASA DEVELOP partnered with the BLM Colorado River Field Office, Colorado State University Extension, USDA Forest Service, and the National Drought Mitigation Center to address stakeholder concerns of the efficacy of existing remotely sensed rangeland production estimation platforms and explore possible early warning climatic indicators of drought. The study identified two key rangeland platforms, the Rangeland Production Monitoring Service (RPMS) and Rangeland Analysis Platform (RAP) and used in-situ data to statistically validate their efficacy. RAP outperformed RPMS in estimating in-situ biomass and was therefore used in our climate modeling. Our study performed a random forest analysis, sampling 1500 points across the study area, comparing monthly RAP biomass estimates to a variety of climatic variables, including mean precipitation, temperature, palmer drought severity index, snow water equivalent, wind speed and direction, and vapor pressure deficit. After analysis, our study determined that vapor pressure deficit is a key indicator in predicting forage production in MLRA-48. Our study recommends the use of RAP in estimating potential forage, with caution for its tendency to overestimate. Our climate analysis provided our partners with greater understanding of the influence of various climatic factors in determining forage production and allows them to assist landowners in planning for future drought.

Addie Gonzalez↗

Lowering Barriers to Science and Space Weather Research at the Community Coordinated Modeling Center (CCMC)

The Space Weather and Heliophysics research and modeling community has been pushing the limits of our ability to understand and predict space weather events. The Community Coordinated Modeling Center (CCMC, https://ccmc.gsfc.nasa.gov) supports the community by providing a convenient collaborative platform hosting space weather models, model simulation data, curated datasets of solar events, and associated value-added services. Using these services, researchers and other end-users may exercise, evaluate, and intercompare contributed models, triage designated R2O models, as well as collaborate on a continuously updated archive of model run results. We will focus on CCMC’s ongoing commitment to the principles and guidelines of the Open Science initiative. Particularly, we will discuss our work towards making our services more transparent and our library of model simulations more accessible, open, and reproducible. We will introduce our recent tools for data discovery and correlative analysis designed to further increase the value of the user-generated data and metadata. We will also present our recent work on making heliophysical models more accessible and open to the community, particularly through simplified user experience and expert domain support. We will report on our progress in establishing an inter-center infrastructure with the ESA Virtual Space Weather Modelling Centre (VSWMC), designed to cross organizational boundaries and provide streamlined access to a joint palette of the models.

space weather↗

NASA's Earth Observing Data and Information System

NASA's Earth Observing System Data and Information System (EOSDIS) has been a central component of NASA Earth observation program for over 10 years. It is one of the largest civilian science information system in the US, performing ingest, archive and distribution of over 3 terabytes of data per day much of which is from NASA s flagship missions Terra, Aqua and Aura. The system supports a variety of science disciplines including polar processes, land cover change, radiation budget, and most especially global climate change. The EOSDIS data centers, collocated with centers of science discipline expertise, archive and distribute standard data products produced by science investigator-led processing systems. Key to the success of EOSDIS is the concept of core versus community requirements. EOSDIS supports a core set of services to meet specific NASA needs and relies on community-developed services to meet specific user needs. EOSDIS offers a metadata registry, ECHO (Earth Observing System Clearinghouse), through which the scientific community can easily discover and exchange NASA s Earth science data and services. Users can search, manage, and access the contents of ECHO s registries (data and services) through user-developed and community-tailored interfaces or clients. The ECHO framework has become the primary access point for cross-Data Center search-and-order of EOSDIS and other Earth Science data holdings archived at the EOSDIS data centers. ECHO s Warehouse Inventory Search Tool (WIST) is the primary web-based client for discovering and ordering cross-discipline data from the EOSDIS data centers. The architecture of the EOSDIS provides a platform for the publication, discovery, understanding and access to NASA s Earth Observation resources and allows for easy integration of new datasets. The EOSDIS also has developed several methods for incorporating socioeconomic data into its data collection. Over the years, we have developed several methods for determining needs of the user community including use of the American Customer Satisfaction Index and a broad metrics program.

Mitchell, Andrew E.↗

A versatile nondestructive evaluation imaging workstation

Ultrasonic C-scan and eddy current imaging systems are of the pointwise type evaluation systems that rely on a mechanical scanner to physically maneuver a probe relative to the specimen point by point in order to acquire data and generate images. Since the ultrasonic C-scan and eddy current imaging systems are based on the same mechanical scanning mechanisms, the two systems can be combined using the same PC platform with a common mechanical manipulation subsystem and integrated data acquisition software. Based on this concept, we have developed an IBM PC-based combined ultrasonic C-scan and eddy current imaging system. The system is modularized and provides capacity for future hardware and software expansions. Advantages associated with the combined system are: (1) eliminated duplication of the computer and mechanical hardware, (2) unified data acquisition, processing and storage software, (3) reduced setup time for repetitious ultrasonic and eddy current scans, and (4) improved system efficiency. The concept can be adapted to many engineering systems by integrating related PC-based instruments into one multipurpose workstation such as dispensing, machining, packaging, sorting, and other industrial applications.

Chern, E. James↗

State Estimation for K9

The goal of 'Estimate' is to take advantage of attitude information to produce better pose while staying flexible and robust. Currently there are several instruments that are used for attitude: gyros, inclinometers, and compasses. However, precise and useful attitude information cannot come from one instrument. Integration of rotational rates, from gyro data for example, would result in drift. Therefore, although gyros are accurate in the short-term, accuracy in the long term is unlikely. Using absolute instruments such as compasses and inclinometers can result in an accurate measurement of attitude in the long term. However, in the short term, the physical nature of compasses and inclinometers, and the dynamic nature of a mobile platform result in highly volatile and therefore useless data. The solution then is to use both absolute and relative data. Kalman Filtering is known to be able to combine gyro and compass/inclinometer data to produce stable and accurate attitude information. Since the model of motion is linear and the data comes in as discrete samples, a Discrete Kalman Filter was selected as the core of the new estimator. Therefore, 'Estimate' can be divided into two parts: the Discrete Kalman Filter and the code framework.

Xu, Ru-Gang↗

Geonex: A NASA-NOAA Collaboration for Producing Land Surface Products from Geostationary Sensors Using Cloud Computing

The latest generation of geostationary satellites carry sensors such as the Advanced Baseline Imager (GOES-16/17) and the Advanced Himawari Imager (Himawari-8/9) that closely mimic the spatial and spectral characteristics of MODIS and VIIRS, useful for monitoring land surface conditions. The NASA Earth Exchange (NEX) team at Ames Research Center has embarked on a collaborative effort among scientists from NASA and NOAA exploring the feasibility of producing operational land surface products similar to those from MODIS/VIIRS. The team built a processing pipeline called GEONEX that is capable of converting raw geostationary data into routine products of Fires, surface reflectances, vegetation indices, LAI/FPAR, ET and GPP/NPP using algorithms adapted from both NASA/EOS and NOAA/GOES-R programs. The GEONEX pipeline has been deployed on Amazon Web Services cloud platform and it currently leverages near-realtime geostationary data hosted in AWS public datasets under a NOAA-AWS agreement.Initial analyses of various products from ABI/AHI sensors suggest that they are comparable to those from MODIS in representing the spatio-temporal dynamics of land conditions. Cloud computing offers a variety of options for deploying the GEONEX pipeline including choice CPUs, storage media, and automation. We estimate the cost of deploying GEONEX to be $400 - 750 a month for processing data (every 30 minutes) and producing products over the conterminous US. For products such as Fire, latency can be as little as 10 minutes from the time of data acquisition.

Geostationary↗