Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data inference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Observing Changing Ecological Diversity in the Anthropocene

As the world enters the Anthropocene, the planet's environment is changing rapidly, putting critical ecosystem services at risk. Understanding and forecasting how ecosystems will change over the coming decades requires understanding the sensitivity of species to environmental change. The extant distribution of species and functional groups contains valuable information about the performance of different species in different environments. However, with high rates of environmental change, information inherent in ranges of many species will disappear, since that information exists only under quasi-equilibrium conditions. The information content of distributional data obtained now is greater than data obtained in the future. New remote sensing technologies can map chemical and structural traits of plant canopies and allow inference of trait and in many cases, species ranges. Current satellite remote sensing data can only produce relatively simple classifications, but new techniques have dramatically higher biological information content.

environmental changes↗

A Computationally-Efficient Inverse Approach to Probabilistic Strain-Based Damage Diagnosis

This work presents a computationally-efficient inverse approach to probabilistic damage diagnosis. Given strain data at a limited number of measurement locations, Bayesian inference and Markov Chain Monte Carlo (MCMC) sampling are used to estimate probability distributions of the unknown location, size, and orientation of damage. Substantial computational speedup is obtained by replacing a three-dimensional finite element (FE) model with an efficient surrogate model. The approach is experimentally validated on cracked test specimens where full field strains are determined using digital image correlation (DIC). Access to full field DIC data allows for testing of different hypothetical sensor arrangements, facilitating the study of strain-based diagnosis effectiveness as the distance between damage and measurement locations increases. The ability of the framework to effectively perform both probabilistic damage localization and characterization in cracked plates is demonstrated and the impact of measurement location on uncertainty in the predictions is shown. Furthermore, the analysis time to produce these predictions is orders of magnitude less than a baseline Bayesian approach with the FE method by utilizing surrogate modeling and effective numerical sampling approaches.

Warner, James E.↗

GPS Altimetry

The advent of satellite altimetry has greatly improved our ability to observe global ocean circulation. However, the swath of a single, nadir-viewing satellite altimeter is only a few km and the track spacing is several hundred km to resolve the two-dimensional structure of ocean eddies. Our goal is to increase spatial and temporal coverage by monitoring Global Positioning System (GPS) signals reflected from the ocean. A constellation of spacecraft would each carry a GPS receiver capable of recording 8 reflections simultaneously. The reflections are well distributed in azimuth and elevation and can be tracked continuously while the satellite is in view, and another is then acquired, as illustrated below. The diagram depicts a new approach at altimetry measurements where ocean surface reflected GPS signals are simultaneously tracked and processed in a GPS flight receiver in space. The reflected GPS signals from the ocean must be compared precisely with the direct GPS signals in order to infer the characteristics of the ocean from the combined data set. Understanding the features and accuracy of GPS altimetry measurement is crucial to establishing its suitability for oceanography. Preliminary work has enabled us to theoretically model the signal output of the correlator for a variety of system parameters such as wind speed (sea roughness), receiver height, incidence angle, receiver range and Doppler filter bandwidth and antenna gain. Expected signal-to-noise ratio has been estimated from which we have inferred, to a first approximation, the basic receiver gain requirements for a space-based altimeter and the expected range raw error. In 1998, work on a different task led to the extraction of the first reflected GPS signal observed from a spaceborne receiver during the 1995 Space Transportation System-68 (STS-68) Shuttle Radar Laboratory-2 (SRL-2) high resolution synthetic aperture radar mission. Good comparisons with our signal models have been obtained. Having established that only modest signal-to-noise ratios are obtainable unless very high gain antennas are used, we expect that single measurements might not provide an estimate of sea state parameters as accurate as that obtainable with traditional remote sensing instruments, if costs are limited. Therefore spatial and temporal averaging of many measurements is required. Since the receiving satellite tracks do not repeat, measurements in a given area will be used to refine the local solution as a function of time, and will define the spatial resolution. In order to make this instrument viable in space, we need to detect and process many scattered signals. In 1998 we made a first step at understanding what configurations of antenna gain and orientations capture the largest number of viable signals to be used in the subsequent spatial/temporal averaging process. Additional information is contained in the original.

Lichten, Stephen M.↗

An overview of geological results from Mariner 9.

Summary of Mariner 9 mission operations associated with the acquisition of geological data. Selected results are presented, along with hypotheses inferred from preliminary evidence. These hypotheses are included in order to call attention to areas in which potentially valuable work can be performed.

Masursky, H.↗

Applicability of ERTS-1 to Montana geology

The author has identified the following significant results. Late autumn imagery provides the advantages of topographic shadow enhancement and low cloud cover. Mapping of rock units was done locally with good results for alluvium, basin fill, volcanics, inclined Paleozoic and Mesozoic beds, and host strata of bentonite beds. Folds, intrusive domes, and even dip directions were mapped where differential erosion was significant. However, mapping was not possible for belt strata, was difficult for granite, and was hindered by conifers compared to grass cover. Expansion of local mapping required geologic control and encountered significant areas unmappable from ERTS imagery. Annotation of lineaments provided much new geologic data. By extrapolating test site comparisons, it is inferred that 27 percent of some 1200 lineaments mapped from western Montana represent unknown faults. The remainder appear to be localized mainly by undiscovered faults and sets of minor faults or joints.

Weidman, R. M.↗

Remote in-situ elemental analysis systems for underwater application

The systems approach, theoretical measurement calculations, and preliminary measurements to be used in monitoring and mapping pollutants (such as traces of heavy metals) in the Chesapeake Bay are discussed. A neutron gamma-ray method is under development for demonstrating the system. The excitation source to be used is a machine accelerator using a deuterium/tritium reaction to produce 14-MeV neutrons. The neutrons excite characteristic gamma ray emission from the neutron irradiated surface. The discrete line emission produced can be used to infer both qualitative and quantitative elemental composition. A data preprocessor will accumulate, digitize, store, format, and prepare the data for transmission which can be accomplished by telephone, microwave, and possibly satellite link to central processors.

Trombka, J. I.↗

M2 ocean tide parameters and the deceleration of the moon's mean longitude from satellite orbit data

An estimation was made of the principal long period spherical harmonic parameters in the representation for the M sub 2 ocean tide from the orbital histories of three satellites - 1967-92A (TRANSIT), Starlette, and GEOS-3. The data used were primarily the evolution of the orbital inclinations of the satellites, with the addition of the longitude of the ascending node from GEOS-3. The results are: (1) C sub 22 superscript + = 3.42 plus or minus 0.24 cm; (2) sub 42 superscript + = 0.97 plus or minus 0.12 cm; (3) epsilon subscript 22 superscript + = 325 D.5 plus or minus 3.D9; (4) epsilon subscript 42 superscript + = 42 = 124D.0 plus or minus 6 D.9. These values agree quite well with recent numerical models and another recent determination from satellite data. The M sub 2 parameters obtained here infer an N of -25 plus or minus 3 arc seconds/century squared, in good agreement with other investigators. The range of current determinations of N is from -24.6 to 27.2 arc second/century squared.

Felsentreger, T. L.↗

Mean sea level determination from satellite altimetry

The primary experiment on the Geodynamics Experimental Ocean Satellite-3 (GEOS-3) is the radar altimeter. This experiment's major objective is to demonstrate the utility of measuring the geometry of the ocean surface; i.e., the geoid. Results obtained from this experiment so far indicate that the planned objectives of measuring the topography of the ocean surface with an absolute accuracy of + or - 5 m can be met and perhaps exceeded. The GEOS-3 satellite altimeter measurements have an instrument precision in the range of + or - 25 cm to + or - 50 cm when the altimeter is operating in the 'short pulse' mode. After one year's operations of the altimeter, data from over 5000 altimeter passes have been collected. With the mathematical models developed and the altimeter data presently available, mapping of local areas of ocean topography has been realized to the planned accuracy levels and better. This paper presents the basic data processing methods employed and some interesting results achieved with the early data. Plots of mean sea surface heights as inferred by the altimeter measurements are compared with a detailed 1 by 1 deg gravimetric geoid.

Kahn, W. D.↗

Evaluation and development of satellite inferences of convective storm intensity using combined case study analysis and thunderstorm model simulations

Major research accomplishments which were achieved during the first year of the grant are summarized. The research concentrated in the following areas: (1) an examination of observational requirements for predicting convective storm development and intensity as suggested by recent numerical experiments; (2) interpretation of recent 3D numerical experiments with regard to the relationship between overshooting tops and surface wind gusts; (3) the development of software for emulating satellite-inferred cloud properties using 3D cloud model predicted data; and (4) the development of a conceptual/semi-quantitative model of eastward propagating, mesoscale convective complexes forming to the lee of the Rocky Mountains.

Cotton, W. R.↗

Evaluation and development of satellite inferences of convective storm intensity using combined case study and thunderstorm model simulations

Observational requirements for predicting convective storm development and intensity as suggested by recent numerical experiments are examined. Recent 3D numerical experiments are interpreted with regard to the relationship between overshooting tops and surface wind gusts. The development of software for emulating satellite inferred cloud properties using 3D cloud model predicted data and the simulation of Heymsfield (1981) Northern Illinois storm are described as well as the development of a conceptual/semi-quantitative model of eastward propagating, mesoscale convective complexes forming to the lee of the Rocky Mountains.

Cotton, W. R.↗

Eddy diffusion at Saturn's homopause

Measurements of Saturn's He 584 A dayglow and the CH4 density profile deduced from stellar occultation data near the homopause have been combined to infer an eddy diffusion coefficient of 8 + or - 4 x 10 to the 7th sq cm/s and a temperature of 125 + 40 or - 25 K near the homopause at Voyager 2 encounter. It appears that the eddy diffusion coefficient may have increased between the Voyager encounters. Saturn's H Ly-alpha dayglow is qualitatively compatible with this increase and the interpretation of the He 584 A dayglow and CH4 absorption measurement.

Sandel, B. R.↗

Measuring Clouds With Microwaves and Infrared

Combination of microwave and infrared measurements from satellites yields data from which thicknesses and temperature of clouds inferred. Microwave radiation measured by satellite used to determine thickness of cloud and difference between cloud-top temperature and mean temperature of interior. Technique extends capability of previously established method in which infrared radiation returned to satellite by cloud used to determine temperature and altitude of cloud top and fractional area of Earth covered by cloud.

Pandey, P. C.↗

Air-sea heat exchange, an element of the water cycle

The distribution and variation of water vapor, clouds and precipitation are examined. Principal driving forces for these distributions are energy exchange and evaporation at the air-sea interface, which are also important elements of air-sea interaction studies. The overall aim of air-sea interaction studies is to quantitatively determine mass, momentum and energy fluxes, with the goal of understanding the mechanisms controlling them. The results of general circulation simulations indicate that the atmosphere in mid-latitudes responds to changes in the oceanic surface conditions in the tropics. This correlation reflects the strong interaction between tropical and mid-latitude conditions caused by the transport of heat and momentum from the tropics. Studies of air-sea exchanges involve a large number of physica, chemical and dynamical processes including heat flux, radiation, sea-surface temperature, precipitation, winds and ocean currents. The fluxes of latent heat are studied and the potential use of satellite data in determining them evaluated. Alternative ways of inferring heat fluxes will be considered.

Chahine, M. T.↗

Boron cosmochemistry

The assumption that boron is a moderately volatile element is examined. It was demonstrated that interior pieces of chondrites contain significantly less boron than had been thought to be indigenous to this type of meteorite. The mean and range of boron abundances in 16 internal pieces of 10 chondrites were significantly smaller than in 126 pieces of 40 chondrites with unknown terrestrial histories. A new value of the cosmic abundance of boron was determined using the geometric average of the results from interior pieces of 10 chondrites. Based upon the thermodynamic assessment of the cosmochemical properties of boron by Cameron, et al. Anders and Ebihara assumed that boron was a moderately volatile element. They renormalized the data of Curtis et al. to a chondrule free basis and thus inferred that the cosmic abundance of boron was about 3 times greater than that proposed by Curtis, et al. To resolve these differences in data, the relative abundances of several elements including boron were measured in 38 carefully prepared interior pieces of 26 different chondrites. Correlation between boron and sulfur abundances, indicate that, contrary to the conclusions of Cameron, et al., boron is not a moderately volatile element.

Curtis, D. B.↗

Vertical temperature sounding of the atmosphere

Attention is given to physical principles that affect the determination of atmospheric temperature profiles from observations of outgoing IR and microwave radiation. Simultaneous analysis of IR and microwave observations enhances observations in each spectral region. While IR soundings have higher sensitivity to lower tropospheric temperatures, ground temperatures, and sea surface temperatures, microwave observations are not only more suited to stratospheric sounding but are sensitive to snow and ice cover. They significantly aid correction of IR observations for cloud effects. Because effective cloud parameters and snow and ice cover can be inferred from the observations, 'temperature sounders' also yield data for a number of important climatic parameters.

Suskind, J.↗

Mossbauer spectroscopy of extraterrestrial materials

Mossbauer Spectroscopy (MS) has recently been added to the tools used by Dr. Richard Morris of the Experimental Planetology Branch of the Solar System Exploration Division at Johnson Space Flight Center in his research on synthetic and natural analogs of lunar and Martian soils. A least-squares fitting program for MS data written originally for an IBM 360 Mainframe computer was adapted for use on an IBM-PC microcomputer. The adapted program has been applied to the analysis of MS spectra obtained from several samples of Antarctic soil under investigation at JSC as analogs to soil of the Martian regolith. Preliminary conclusions have been drawn from the MS data about the composition of the Antarctic samples. Inferences from optical spectra obtained for these same samples have been compared with the MS results.

Agresti, D. G.↗

Electrical properties of TGS crystals grown by a new technique

The cooled sting technique used to grow triglycine sulphate (TGS) crystals is investigated. The sting procedure, which achieves supersaturation by cooling the seed crystal mounted on the sting is described and a diagram is provided. Temperature differentials of 1.5 and 1.0 C are optimum for growing (001) and (010) orientation TGS seeds. The data obtained are compared with previous data and good correlation is shown; it is inferred that TGS crystals of any orientation can be grown at a uniform rate of 1 mm/day using this technique.

Batra, A. K.↗

Demonstration of the fiducial concept using data from the March 1985 GPS field test

The first field test of NASA's Global Positioning System (GPS) Geodetic Program took place in March of 1985. The principal objective of this test was the demonstration of the feasibility of the fiducial station approach to precise GPS-based geodesy and orbit determination. Other objectives included an assessment of the performance of the several GPS receiver types involved in these field tests and the testing of the GIPSY software for GPS data analysis. In this article, the GIPSY (GPS Inferred Positioning System) software system is described and baseline solutions are examined for consistency with independent measurements made using very long baseline interferometry.

Davidson, J. M.↗