Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crustal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Titanium-in-Quartz Geothermometry of Impactites and Peak-Ring Lithologies from the Chicxulub Impact Crater

Since its development by Wark and Watson (2006), the Ti-in-quartz geothermometer (TitaniQ) has been continuously refined and applied to a variety of lithologies from different crustal settings. Assuming quartz crystallized and incorporated Ti under equilibrium conditions and providing TiO2 activity (alpha (sub TiO2)) is reasonably constrained, crystallization temperatures at typical crustal pressures can be calculated. In turn, when crystallization temperatures are independently constrained, Ti-in-quartz can be used as a geobarometer. Here we explore the application of this technique to impact lithologies. Quartz is ubiquitous in terrestrial impact structures in upper crustal settings and can also form as a post-impact hydrothermal mineral. Together with other geothermometers, such as Ti-in-zircon, Ti-in-quartz can potentially help constrain the temperature-pressure conditions during the formation of the pre-impact target rock at terrestrial impact structures, as well as impact-produced and hydrothermally-altered lithologies. This work presents the first systematic Ti-in-quartz study of impactites and granitoid target rocks from the approximately180-kilometer-diameter, end-Cretaceous Chicxulub crater on the Yucatan Peninsula, Mexico, thereby placing new constraints on the emplacement of felsic plutons within the Maya Block in the Paleozoic, impact melt crystallization at approximately 66 Ma (million years ago), and post-impact hydrothermal overprint inside the Chicxulub crater.

Schmieder, Martin↗
NASA NTRSDate not supplied

VERNE: Revealing the Mysteries and Histories of Venus

Introduction: The three Venus missions that were recently selected for upcoming flight (VERITAS, DAVINCI+, and EnVision) will be incredibly valuable to our understanding of Venus’ history, geology, and atmosphere. However, even once completed, key gaps in our knowledge of Venus, and more generally the formation and active processes on rocky, Earth-like planets, will still persist. Remaining questions include 1) how global intrinsic magnetic fields might be maintained on rocky worlds, and how they could then go extinct, and 2) what role atmospheric sulfur chemistry plays in climates of Earth-like planets, which is an increasingly timely subject as Earth’s own atmospheric sulfur content is climbing due to human activity. These questions require in-situ observations from Venus’ cloud deck, at the altitudes at which the UV absorber exists. The Venus Environment Research and Novel Exploration (VERNE) mission will address these questions with an aerial platform that will drift around the equatorial region of the planet for 9 days. VERNE will collect data to determine the identity of the mysterious UV absorber, while also taking magnetic field measurements over the tesserae, the regions on Venus that are most likely to retain remanent crustal magnetization, in order to understand the potential role of a past intrinsically-generated global magnetic field on Venus. Mission Objectives: The two major science objectives that drive the VERNE mission are: 1) Determine the identity of the Venusian unknown ultraviolet absorber(s). First observed approximately a century ago [1], the composition of Venus’ ultraviolet (UV) absorber is one of the oldest mysteries in Venus atmospheric chemistry [2,3]. While several candidate UV absorbers (mostly sulfur species) have been proposed, no consensus has been reached on its composition and its specific interactions with the atmosphere. Determining the identity of the UV absorber will aid climate models by showing how and where incident solar energy is absorbed by the atmosphere and make progress towards understanding the chemical and energetic processes taking place above Venus’ upper cloud deck [4]. 2) Determine if Venus retains evidence of a past, internally-generated magnetic field. While Venus does not currently have an intrinsically-generated magnetic field, evidence for the existence of a past field on Venus and a timeline of its decay will fill in a more holistic picture of the evolution of Venus’ geological record and atmosphere. As the oldest geologic units on the surface, Venus’ tesserae may still have remanent crustal magnetization signatures within the rocky composition [5]. In any case, the signatures detected will provide insight into Venus’ past geological and core dynamo activity. Mission Summary: VERNE includes a 3-part flight system made up of 1) an entry system with a HEEET (Heatshield for Extreme Entry Environment Technology) aeroshell, 2) an orbiter for data relay, and 3) an in-situ balloon and gondola. After entry into Venus’ atmosphere, the balloon will be deployed within the upper cloud deck, at an altitude of 62 km, over a tesserae region. The in-situ data collection will last for the duration of 2 full circumnavigations of the planet, which will take ~9 days. Instrumentation Suite: The four instruments that comprise VERNE’s instrument payload will enable the identification of the unknown UV absorber and the detection of remanent crustal magnetization if it exists in the tesserae. The proposed instrument suite cycle during mission operations is shown in Fig. 1. The four instruments are described below: 1) Adams (ion neutral mass spectrometer) has a range of 18-257 AMU and will detect and distinguish the mixing ratios of O₂, H₂O, H₂SO₄, S, S₂, S₃, S₄, S₅, S₆, S₇, S₈, SO, SO₂, OSSO, SO₃, Cl₂, FeCl₃ and other trace sulfur and organic species. The spatial (longitudinal) and temporal (day/night) variations will be observed throughout 2 circumnavigations with a sample cadence of 12 minutes. 2) Shelley (nephelometer) will determine the size distribution of the aerosols (0.4 to 36 um) in the atmosphere. With a size resolution of <0.7 um, it can determine which mode of H2SO4 is present and characterize the large (>30 um) organic particles previously detected by the Venera and Galileo missions [6,7]. 3) Herbert (UV imager) will measure UV radiance at 283 nm (the wavelength of SO2 absorption) and 365 nm (the unknown part of the absorber). UV images will be taken concurrently with the INMS and nephelometer to correlate UV absorption with abundances of the UV absorber species. 4) Vonnegut (magnetometer) has a range of >600 nT and a precision and accuracy of 1 nT. If magnetized by a past field, the crust may have retained a magnetization of up to 3 A/m2 [5]. With a noise floor of 10 nT, the magnetometer will be able to detect RCM from an altitude of 62 km, even if the thickness of the magnetized crust is just 1 km (Fig. 2). Mission Concept Design: VERNE will be launched with a mass of 3300 kg in an intermediate-high performance class vehicle with a 4-m fairing. The 475-day mission includes 466 days for the cruise, coasting, and orbit initialization phases before entry, descent, and balloon deployment. During the 9-day science phase, the aerial platform will make 2 circumnavigations of the planet at an altitude of 62 km. The INMS and the nephelometer will acquire data for 2 hours during the daytime and nighttime during each circumnavigation, while the UV imager will be on for the duration of the daytime, and the magnetometer will be operational throughout the entirety of the science phase. Data will be stored and processed with the JPL-designed Sphinx command and data handling system. Data will be sent from the balloon to the orbiter using an S-band relay link, stored on the orbiter, and then forwarded to Earth where it will be received by the DSN. Conclusion: VERNE will fill key gaps in our understanding of the history and ongoing processes related to the geology and atmosphere of Venus and rocky worlds in general. Even with adequate flight system contingencies and expected costs below the $900M New Frontiers cost cap, VERNE is not without its risks and challenges. Further trade spaces to explore include 1) using solely battery power vs. including solar panels to increase the mission duration and 2) investigating the use of lightweight materials and 3D-printed structures to reduce the gondola mass, among others. Acknowledgments: We would like to thank the JPL Planetary Science Summer School, especially our mentors Troy Hudson, Karl Mitchell, and Leslie Lowes, as well as our Team-X study lead Al Nash and the members of Team-X. We’d additionally like to thank our review panel for asking insightful questions and providing valuable feedback. References: [1] Ross, F. E. (1928) Astrophysical J., 68, 57-92. [2] Rossow, W. B. et al. (1980) J. Geophysical Research, 85, 8107-8128. [3] Pinto, J. P. et al. (2021) Nature Communications, 12, 175. [4] Titov, D. V. et al. (2007) Cosmic Research, 21, 401. [5] O’Rourke, J. et al. (2019) Geophysical Research Lett., 46, 5768–5777. [6] Limaye, S. S. et al. (2018) Astrobiology, 18(9), 1181-1198. [7] Grinspoon, D. H. et al. (2013) Planetary and Space Sci., 41(7), 515-542. [8] Parker, R. L. (2003) J. Geophysical Research, 108, 5006. *The cost information contained in this document is of a budgetary and planning nature and is intended for informational purposes only. It does not constitute a commitment on the part of JPL and/or Caltech.

H Alpert↗
NASA NTRS2022

Discrete Aurora on the Nightside of Mars: Occurrence Location and Probability

This paper represents the first attempt to predict the occurrence location and probability of discrete electron aurora on the nightside of Mars. We run a 3-D time-dependent magnetohydrodynamic model to characterize the spatial and temporal dynamics of magnetic field and plasma distributions over the course of one planetary rotation. We perform eight simulation cases under solar minimum quiet-solar-wind conditions (four equinox/solstice seasons, each with two interplanetary magnetic field polarities) and in an actual interplanetary coronal mass ejection (ICME) case to assess quiet and space weather situations, respectively. The occurrence of detectable discrete aurora is subject to the combination of the probabilities that (a) the ionosphere is magnetically connected with high altitudes through open field lines and (b) precipitating energy fluxes of >30 eV electrons exceed 0.1 erg/cm2/s. Our results show that during quiet solar activity, discrete aurora occurs likely on small-scale patches embedded inside strong crustal magnetic field regions (with a magnitude greater than 50 nT at 150 km), and the overall chance across the globe is ∼0.77%. The higher probability over strong crustal field regions is attributed to the stronger magnetic field convergence. Modeling shows the occurrence probability dramatically increases during the ICME event, particularly by more than an order of magnitude in weak crustal field regions. Our model results reasonably agree with NASA Mars Atmosphere and Volatile EvolutioN and Mars Express observations. Our study suggests that nightside discrete electron aurora is not caused by the direct entry of magnetosheath plasma in a cusp-like process but due to the recycling of nightside magnetospheric electrons.

Xiaohua Fang↗
NASA NTRSDate not supplied

SelenITA: A dual-spacecraft lunar CubeSat mission to characterize the near-surface electromagnetic plasma environment

SelenITA is an international interdisciplinary mission consisting of two CubeSats that will provide the first multi-point measurement in a sustained low lunar orbit. This mission will advance the understanding of spatiotemporal differentiation of the electromagnetic space environment at the Moon in support of Artemis crew and the geosciences. The mission science objectives are to: (1) further constrain the origins of crustal magnetic fields and their applications; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface potential in all plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include: 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), energetic particles (protons, electrons, gamma rays), and dust. SelenITA builds on a rich history of electromagnetic plasma observations of the near lunar surface and space environment, and it answers high level science questions with state of the art instruments in a small package. PLAIN LANGUAGE ABSTRACT – SelenITA comes from the greek word for Moon, selene, with the addition of “ITA” as a reference to the Brazilian teammate, Instituto Tecnológico de Aeronáutica. In addition, in Portuguese "ita" is a prefix similar to "ite" in English, used in naming minerals, so Selenita could be seen as a lunar gemstone. In Spanish, “ita” is a diminutive suffix for “little” which is appropriate for this CubeSat mission which consists of twin 12U CubeSats in low lunar orbit. The primary science goal of the mission is to distinguish time varying features within the electromagnetic plasma environment near the surface of the Moon. The science objectives include investigating the origins of crustal magnetic fields, plasma interactions with these fields, plasma waves, surface potential, and interior properties. This mission is also interested in the radiation environment at the Moon and the amount of dust at the lunar poles. This is important because it helps us understand how future astronauts will live and work on the lunar surface and identify hazards.

space weather↗
NASA NTRSDate not supplied

SelenITA: A Dual-Spacecraft Lunar CubeSat Mission to Characterize the Near-Surface Electromagnetic Plasma Environment

SelenITA is an international interdisciplinary mission consisting of two CubeSats that will provide the first multi-point measurement in a sustained low lunar orbit. This mission will advance the understanding of spatiotemporal differentiation of the electromagnetic space environment at the Moon in support of Artemis crew and the geosciences. The mission science objectives are to: (1) further constrain the origins of crustal magnetic fields and their applications; (2) determine the nature of plasma interactions with crustal magnetic fields; (3) characterize plasma waves and turbulence at the Moon; (4) characterize the lunar surface potential in all plasma environments; (5) constrain the composition, thermal state, and structure of the lunar upper mantle and crust; (6) characterize the ionizing radiation in lunar orbit; (7) determine the density of the dust exosphere as a function of latitude, longitude, and altitude, including the lunar polar space environment. The measurement requirements include: 3-component vector magnetic field, plasma distribution (flux, energy, density, temperature), energetic particles (protons, electrons, gamma rays), and dust. SelenITA builds on a rich history of electromagnetic plasma observations of the near lunar surface and space environment, and it answers high level science questions with state of the art instruments in a small package. PLAIN LANGUAGE ABSTRACT – SelenITA comes from the greek word for Moon, selene, with the addition of “ITA” as a reference to the Brazilian teammate, Instituto Tecnológico de Aeronáutica. In addition, in Portuguese "ita" is a prefix similar to "ite" in English, used in naming minerals, so Selenita could be seen as a lunar gemstone. In Spanish, “ita” is a diminutive suffix for “little” which is appropriate for this CubeSat mission which consists of twin 12U CubeSats in low lunar orbit. The primary science goal of the mission is to distinguish time varying features within the electromagnetic plasma environment near the surface of the Moon. The science objectives include investigating the origins of crustal magnetic fields, plasma interactions with these fields, plasma waves, surface potential, and interior properties. This mission is also interested in the radiation environment at the Moon and the amount of dust at the lunar poles. This is important because it helps us understand how future astronauts will live and work on the lunar surface and identify hazards.

space weather↗
DOE OSTI2023

The influence of permeability anisotropy in the upper ocean crust on advective heat transport by a ridge-flank hydrothermal system

Here, in this study, we highlight the importance of permeability anisotropy on the hydrogeological regime of a ridge-flank hydrothermal system. Our study site, North Pond, is a marine sediment pond on ~8 Ma seafloor in the North Atlantic, and represents a low-temperature, end-member ridge-flank hydrothermal system. Previous simulations of North Pond elucidated long-standing hypotheses concerning hydrothermal fluid and heat transport in the upper volcanic crust but failed to fully explain observed patterns of seafloor heat flux in this area. Here we use variography, a geostatistical method, to quantify relations between seafloor heat-flux measurements, and coupled numerical simulations of fluid and heat flow to simulate the hydrogeologic regime. Directional variography shows that heat-flux observations are correlated along-strike of the regional crustal fabric. Three-dimensional simulations that include permeability anisotropy are able to replicate seafloor heat-flux patterns across North Pond. The simulations that result in the best match to thermal data incorporate permeability anisotropy in the horizontal plane. We find that the feedback between permeability anisotropy and the asymmetric geometry of North Pond combine to promote advective removal of heat and mass within the crustal aquifer. These findings suggest that permeability anisotropy in the oceanic crust may influence ridge-flank hydrothermal circulation more broadly.

58 GEOSCIENCES↗
DOE OSTI2022

Mars-Ward Ion Flows in the Martian Magnetotail: Mars Express Observations

In this work, we investigate Mars-ward planetary ions (O + and O 2 + ) in the Martian magnetotail that potentially reduce the amount of escaping ions. The global properties of Mars-ward flows in the Martian magnetotail are characterized, based on over 13-years of ion data (May 2007–December 2020) collected by the Analyzer of Space Plasma and Energetic Atoms instrument on Mars Express. We find that Mars-ward flows are frequently observed in the vicinity of the crustal fields, implying that crustal fields may play a key role in producing such flows. The occurrence rate and sunward flux are found higher during solar maximum than solar minimum. However, the occurrence rate and flux of Mars-ward flows are relatively low. This is different from the case at Venus, where the planetward flows can significantly decrease the total escape rates of ions.

58 GEOSCIENCES↗
NASA NTRSDate not supplied

Using Secondary Craters to Assess Strength Differences Between Neighboring Surface Units

An issue with Martian remote sensing studies is the difficulty inferring surface and crustal material properties. For direct information we rely on the instruments of landed missions, like InSight, and extrapolate to other locations. To apply that extrapolation, we would like to use a methodology that can benefit from remote sensing data. We are exploring using secondary craters, which are often thought of as nuisances when determining accurate ages, to calculate crustal properties. The upside of secondary craters is that they are from ejecta blocks moving at relatively lower speeds, this lets them reside in a different crater scaling regime [1], one that is more sensitive to the crust’s effective strength (Yeff) and porosity/internal friction (through the μ and KD terms [A]).

Mars↗
DOE OSTI2023

Noble gas insights into early impact delivery and volcanic outgassing to Earth's atmosphere: A limited role for the continental crust

Earth's atmosphere, crust and mantle have evolved together through continuous geochemical exchange throughout Earth's history. Constraints on the transport of volatile elements and compounds between these reservoirs are crucial for understanding how Earth could have stayed habitable for extended periods of time. In this work, we present a new forward model of He, Ne and Ar in the mantle, crust and atmosphere. We explore concentrations of noble gases at the end of accretion, bulk silicate Earth K/U ratios, crustal growth scenarios, and upper mantle processing rates throughout Earth's history. We search for parameter combinations that simultaneously satisfy observational constraints on present-day mantle 4 He/ 3 He and 40 Ar/ 36 Ar (sensitive to mantle outgassing and continental crust growth, which depletes the mantle of U, Th and K), atmospheric 20 Ne/ 22 Ne (which tracks the mix of outgassed vs. delivered Ne in the atmosphere), and atmospheric 40 Ar/ 36 Ar in the past and today (sensitive to volatile delivery, mantle outgassing and crustal growth). Leveraging this intertwined set of noble gas abundances and isotopic compositions yields new constraints on initial noble gas abundances in the mantle and on the proportions of atmospheric volatiles originating from delivery by impact degassing, mantle outgassing, and degassing of the continental crust. We find that atmospheric Ar isotopic evolution is primarily sensitive to the mantle processing rate history; the atmospheric Ar isotopic record should therefore not be used to reconstruct continental crust growth, but instead provides valuable insights into mantle processing rates. Our model predicts a measurably low 20 Ne/ 22 Ne ratio of ~9.7 in Archean atmospheric samples. Most of atmospheric primordial 36 Ar was directly delivered by chondritic bodies and not transferred to the atmosphere during an intense early episode of mantle outgassing. Nitrogen delivered by impact degassing could account for the present-day atmospheric nitrogen inventory.

58 GEOSCIENCES↗
DOE OSTI2023

Chronology of alkali anorthosite 14304 clast “b” records basin forming impact at ~3.95 Ga

Alkali-suite rocks constitute one of three major suites of lunar crustal rocks. As such, constraining their formation timescales and petrogenesis is important for understanding the earliest magmatic history of the Moon. However, the magmatic history of alkali-suite rocks is partly obscured by superimposed effects of major basin-forming impact events on the lunar nearside. Consequently, unambiguous crystallization ages of samples from this suite of rocks have not been determined. Here, the aim of this study is to better understand the petrogenetic history of the alkali-suite and the potential superimposed effects of impact metamorphism by determining Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages for an alkali anorthosite clast from Apollo 14 lithic breccia 14304 termed clast “b”. The new chronologic measurements of clast “b” yield concordant Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar ages of 3947 ± 13 Ma, 3975 ± 34 Ma, and 3937 ± 37 Ma respectively, resulting in a weighted mean age of 3949 ± 11 Ma. This age is not interpreted to date an igneous event related to production of the lunar highlands crust and instead the chronology and petrography of clast “b” are most readily explained by an impact event at ~3.95 Ga that caused near-complete isotopic re-equilibration of the Sm-Nd, Rb-Sr, and 40 Ar/ 39 Ar chronometers. The weighted mean age of 3949 ± 11 Ma of clast “b” is several hundred Ma younger than 4.3–4.4 Ga ages typically determined for samples of other crustal rock suites but in very good agreement with independent estimates for the formation of Imbrium basin ejecta and other marginally older impact events which are thought to have been sampled at the Apollo 14 landing site. Thus, although petrologic and geochemical examination suggest that clast “b” is a pristine igneous clast, its age likely records an impact event at the Apollo 14 landing site. Whereas the various determined ages of clast “b” do not reflect the timescales of alkali-suite magmatism, the relatively low initial Sr and Nd isotopic compositions of clast “b” indicate that its protolith evolved with very low 147 Sm/ 144 Nd and 87 Rb/ 86 Sr that are distinct from estimates for urKREEP but similar to that of lunar plagioclase. This implies that the igneous protolith of clast “b” derived from a plagioclase-dominated KREEP-rich source that must have formed after the formation of the urKREEP source at ~4.35 Ga but well before the impact event recorded by clast “b” at ~3.95 Ga.

58 GEOSCIENCES↗
DOE OSTI2026

The solubility and speciation of REE phosphate endmembers (CePO 4 and YPO 4 ) in Cl-rich aqueous fluids from 350 to 450 °C and implications for natural systems

The rare earth elements (REE) are important metals used increasingly in advanced technologies. Within the crust, the elements Ce and Y are commonly more abundant compared to other lanthanides and comprise important end-member constituents of REE-bearing minerals. Specifically, Ce is part of the light (L) REE which have larger ionic radii than the heavy (H) REE, which are grouped together with Y. These differences in ionic radius can lead to important physico-chemical trends within the lanthanide group. Despite a recent increase in experimental and thermodynamic data for the REE at high temperature and pressure, there is still a significant lack of these data at supercritical conditions. In this study we conducted batch-type experiments to measure the solubility of REE phosphates (CePO 4 and YPO 4 ) at varying starting pH (1.5–10), and salinity (0.01–1.4 mol/kg NaCl) at 350 and P sat , and from 400 to 450 °C at 700 bar. Results show that the solubility of Ce (33–0.14 ppb) is generally higher than Y (13–0.13 ppb) and that Ce complexes more strongly with both chloride and hydroxyl ligands compared to Y. The solubilities of both REE phosphates are highly pH-dependent and, to a lesser extent, depend on salinity at the studied conditions. The solubility data from this study were implemented into the GEMSFITS program to optimize the thermodynamic properties of Ce and Y hydroxyl and chloride species. The updated standard partial molal Gibbs energies of formation (Δ f G 0 T,P ) are used within the experimental temperature and pressure range to accurately predict the CePO 4 and YPO 4 solubility and Ce and Y speciation behavior. Based on the updated thermodynamic properties we also provide formation constants (log β n Cl,OH ) for Ce and Y hydroxyl and chloride species. Updated thermodynamic properties are applied to model REE-apatite dissolution and REE mobility based on the Pea Ridge iron oxide apatite deposit in Missouri, USA. The apatite dissolution model replicates natural observations including the replacement of monazite and xenotime after apatite and is an example of the utility of the new thermodynamic constants applied to supercritical crustal fluids. Furthermore, the findings of this study advance the predictive capabilities of geochemical models, our understanding of the behavior of individual REE, and permit modeling the overarching fractionation trends between LREE and HREE in supercritical crustal fluids.

58 GEOSCIENCES↗
DOE OSTI2024

The Effect of Physically Based Ice Radiative Processes on Greenland Ice Sheet Albedo and Surface Mass Balance in E3SM

Abstract A significant portion of surface melt on the Greenland Ice Sheet (GrIS) is due to dark ice regions in the ablation zone, where solar absorption is influenced by the physical properties of the ice, light absorbing constituents (LACs), and the overlying crustal surface or melt ponds. Earth system models (ESMs) typically prescribe the albedo of ice surfaces as a constant value in the visible and near‐infrared spectral regions. This work advances ESM ice radiative transfer modeling by (a) incorporating a physically based radiative transfer model (SNow, ICe and Aerosol Radiation model Adding‐Doubling Version 4; SNICAR‐ADv4) into the Energy Exascale Earth System Model (E3SM), (b) determining spatially and temporally varying bare ice physical properties over the GrIS ablation zone from satellite observations to inform SNICAR‐ADv4, and (c) assessing the impacts on simulated GrIS albedo and surface mass balance associated with modeling of more realistic bare ice albedo. GrIS‐wide bare ice albedo in E3SMv2 is overestimated by ∼4% in the visible and ∼7% in the near‐infrared wavelengths compared to the Moderate Resolution Imaging Spectroradiometer. Our bare ice physical property retrieval method found that LACs, ice crustal surfaces, and melt ponds reduce visible albedo by 30% in the bare ice region of the GrIS ablation zone. The realistic bare ice albedo reduces surface mass balance by ∼145 Gt, or 0.4 mm of sea‐level equivalent between 2000 and 2021 compared to the default E3SM. This work highlights the importance of simulating bare ice albedo accurately and realistically to improve our ability to quantify changes in the GrIS surface mass and radiative energy budgets.

58 GEOSCIENCES↗
DOE OSTI2024

Haasttse‐baad Tessera Ring Complex: A Valhalla‐Type Impact Structure on Venus?

Abstract Venus preserves ∼1,000 impact craters, yet to date no impact basins larger than 300 km in diameter—common in the oldest terrains on Mercury, Mars and the Moon—are recognized on Venus. The tessera terrain is Venus' oldest recognized terrain. We describe a ∼1,500 km‐diameter concentric ring‐graben complex preserved on Haasttse‐baad Tessera, Venus that we identify as the Haasttse‐baad Tessera Ring Complex (HTRC). Based on geologic relations and numerical modeling, we propose that the HTRC may represent a Valhalla‐type multiring impact basin formed late during the evolution of its host ribbon‐tessera terrain (rtt). Formation of Valhalla‐type impact basins could involve a unique three‐layer target rheology with a thin elastic layer above a low viscosity layer above a deep strong layer. This multi‐layer rheological sandwich is consistent with crustal rheology previously proposed for the formation of Venus' rtt. If the HTRC is a Valhalla‐type impact basin, it would be Venus' oldest, and currently largest, impact structure, providing a rare window into Venus' ancient past and with implications for early crustal processes on Venus.

58 GEOSCIENCES↗
DOE OSTI2024

Formation of a Large Cold Groundwater Mantle Helium Anomaly and High Temperature Geothermal Resources in Response to Bimodal Magmatism Near Roosevelt Hot Springs and Utah FORGE, Milford Valley, Southwest Utah

Abstract A large mantle helium anomaly and separate domains of high heat flow are the predominant manifestations of bimodal magmatic activity in the Milford valley. The mantle helium anomaly (1.9–2.6 R/Ra) covers 270 km 2 and is subdivided into two separated domains: a cold shallow groundwater regime and high temperature hydrothermal activity. The zone of anomalous heat flow covers >100 km 2 and is also subdivided into two adjacent domains, comprising hydrothermal activity at Roosevelt Hot Springs (RHS) (3–7 W/m 2 ) and conductive heat flow (100–180 mW/m 2 ). While the transfer of heat and mantle helium at RHS are coupled, heat and helium transfer are decoupled in the adjacent cold groundwater regime to the west. Both the mantle helium and geothermal anomalies are attributed to recent mafic‐felsic magmatic intrusions of >400 km 3 , however, the absence of volcanic eruptions <500,000 years indicates magmas stall before rising to shallow crustal level <10 km depth. Deep level magmatism produces a felsic composition melt, which is inferred to be responsible for the widespread and near uniform range of diluted mantle helium values. A thick and impermeable mass of crystalline granitic basement rock at the mid‐crustal level divides the ascent of mantle helium into separate flow paths. It may also impede the rise of buoyant magma trapping thermal energy that facilitates partial melting, slow cooling, and development of a thick thermal aureole. Partitioning of convective and conductive thermal regimes and independent flow paths supplying deeply derived helium characterize the development of a large long‐lived magma‐related geothermal system.

Geochemistry & Geophysics↗
DOE OSTI2025

Eocene-Oligocene Metamorphism, Fluid Flow and Deformation in the Ruby Mountains-East Humboldt Range Metamorphic Core Complex

Metamorphic core complexes are ubiquitous in collapsed orogens globally and play a primary role in crustal exhumation. Here, we investigate the metamorphic history of the Ruby Mountains-East Humboldt Range metamorphic core complex, Nevada, using petrochronology to understand how magmatism, metamorphism and deformation interact to modulate crustal rheology, and the timing of exhumation within the Sevier orogenic belt. Field study, microstructural analysis, thermobarometry and laser ablation split-stream monazite, titanite and allanite petrochronology of the mylonitic footwall were integrated to elucidate the pressure-temperature-time (P-T-t) evolution. Major-, trace-element and quartz-in-garnet thermobarometry show peak metamorphism occurred at 5.5–6 kbar and 600–650°C across the study area. Monazite and titanite U-(Th)-Pb petrochronology constrain this episode of metamorphism to 88–81 Ma with the structurally deepest samples yielding dates down to ca. 71 Ma. The preservation of peak metamorphic mineral assemblages indicates these rocks remained at near-peak temperature conditions into the Cenozoic. Cenozoic metamorphism occurred during a punctuated episode contemporaneous with the Great Basin ignimbrite flare up. All samples show a distinct 39–37 Ma population of monazite, titanite and allanite dates that correlate with the emplacement of quartz diorite and gabbro intrusions throughout the footwall. Accessory phases contain zoning textures in backscattered electron images that are consistent with fluid-mediated dissolution-reprecipitation reactions. The U-(Th)-Pb analyses from these zones yield 39–27 Ma dates interpreted as the timing of fluid flow. The results of this study elucidate the integrated importance of magmatism, melting and fluid flow in driving the coupled evolution of Late Cretaceous metamorphism within the Sevier hinterland and the subsequent Cenozoic metamorphic core complex development that exhumed the middle crust.

58 GEOSCIENCES↗
DOE OSTI2025

Tracking the spatial and temporal links between late Cenozoic extension and magmatism in the Death Valley region (California, USA)

The relationship between late Cenozoic magmatism and extension in the central Basin and Range province (western United States) is complex, necessitating high-precision geochronology to understand its spatiotemporal connections. In the Death Valley region (California), the lack of high-precision U-Pb zircon ages has limited our understanding of the timing of pluton formation and its links to regional extension. We present new high-precision chemical abrasion-isotope dilution-thermal ionization mass spectrometry 206 Pb/ 238 U zircon ages and trace element analyses for eight Death Valley plutons. Our findings reveal three distinct phases of intrusive magmatism: (1) emplacement of shallow rapakivi granites at 13.2 Ma, (2) construction of the mid-crustal Black Mountains intrusive complex at 11.3 Ma, and (3) late emplacement of shallow, compositionally diverse intrusions at 8.2 Ma. A gap in zircon crystallization between 10 Ma and 8.2 Ma coincides with exhumation of the Black Mountains and a transition from sill to dike emplacement. The dominance of rapakivi granites in the Death Valley region, which is rare among Cenozoic granitoids, is likely a result of rapid crustal extension that induces adiabatic decompression. A comparison of the timing of volcanism, plutonism, and tectonic events in Death Valley reveals that intrusive magmatism closely tracks the locus of extension, underscoring the plutonic record as a vital link for understanding regional tectonics and changes in plate boundary dynamics during this period.

58 GEOSCIENCES↗
DOE OSTI2022

The Evolving Chronology of Moon Formation

Defining the age of the Moon has proven to be an elusive task because it requires reliably dating lunar samples using radiometric isotopic systems that record fractionation of parent and daughter elements during events that are petrologically associated with planet formation. Crystallization of the magma ocean is the only event that unambiguously meets this criterion because it probably occurred within tens of millions of years of Moon formation. There are three dateable crystallization products of the magma ocean: mafic mantle cumulates, felsic crustal cumulates, and late-stage crystallization products known as urKREEP (uniform residuum K, rare earth elements, and P). Although ages for these materials in the literature span 200 million years, there is a preponderance of reliable ages around 4.35 billion years recorded in all three lunar rock types. This age is also observed in many secondary crustal rocks, indicating that they were produced contemporaneously (within uncertainty of the ages), possibly during crystallization and overturn of the magma ocean. •The duration of planet formation is key information in understanding the mechanisms by which the terrestrial planets formed. •Ages of the oldest lunar rocks range widely, reflecting either the duration of Moon formation or disturbed ages caused by impact metamorphism. •Ages determined for compositionally distinct crust and mantle materials produced by lunar magma ocean differentiation cluster near 4.35 Gyr. •The repeated occurrence of 4.35 Gyr ages implies that Moon formation occurred late in Solar System history, likely by giant impact into Earth.

79 ASTRONOMY AND ASTROPHYSICS↗