Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cost analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Air Monitoring for Hazardous Gas Detection

The Hazardous Gas Detection Lab is involved in the design and development of instrumentation that can detect and quantify various hazardous gases. Traditionally these systems are designed for leak detection of the cryogenic gases used for the propulsion of the Shuttle and other vehicles. Mass spectrometers are the basis of these systems, which provide excellent quantitation, sensitivity, selectivity, response and limits of detection. Unfortunately, these systems are large, heavy and expensive. This feature limits the ability to perform gas analysis in certain applications. Smaller and lighter mass spectrometer systems could be used in many more applications primarily due to the portability of the system. Such applications would include air analysis in confined spaces, in-situ environmental analysis and emergency response. In general, system cost is lowered as size is reduced. With a low cost air analysis system, several systems could be utilized for monitoring large areas. These networked systems could be deployed at job-sites for worker safety, throughout a community for pollution warnings, or dispersed in a battlefield for early warning of chemical or biological threats. Presented will be information on the first prototype of this type of system. Included will be field trial data, with this prototype performing air analysis autonomously from an aircraft.

Arkin, C. Richard↗
DOE OSTI2023

Cost and Life Cycle Analysis for Deep CO 2 Emissions Reduction for Steel Making: Direct Reduced Iron Technologies

Among heavy industrial sectors worldwide, the steel industry ranks first in carbon dioxide (CO 2 ) emissions. Technologies that produce direct reduced iron (DRI) enable the industry to reduce emissions or even approach net‐zero CO 2 emissions for steel production. Herein, comprehensive cradle‐to‐gate (CTG) life cycle analysis (LCA) and techno‐economic analysis (TEA) are used to evaluate the CO 2 emissions of three DRI technologies. Compared to the baseline of blast furnace and basic oxygen furnace (BF–BOF) technology for steel making, using natural gas (NG) to produce DRI has the potential to reduce CTG CO 2 emissions by 33%. When 83% or 100% renewable H 2 is used for DRI production, DRI technologies can potentially reduce CO 2 emissions by 57% and 67%, respectively, compared to baseline BF–BOF technology. However, the renewable H 2 application for DRI increases the levelized cost of steel (LCOS). When renewable natural gas (RNG) and clean electricity are used for steel production, the CTG CO 2 emissions of all the DRI technologies can potentially be reduced by more than 90% compared to the baseline BF–BOF technology, although the LCOS depends largely on the cost of RNG and clean electricity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2022

Advanced Statistical Methods in Spacecraft Flight Software Cost Estimation: Bayesian Regression and Nonlinear Principal Components Analysis to Support System Engineering in the Early Project Lifecycle

This paper provides an overview of the new features and model updates in the upcoming release of the NASA Analogy Software Cost Tool (ASCoT). ASCoT, hosted within the Online NASA Space Estimation Tools (ONSET) on the One NASA Cost Engineering (ONCE) Database, is a web-based tool that provides a suite of estimation tools to support early lifecycle NASA flight software cost analysis. In addition to the traditional parametric flight software costing method COCOMO II, ASCoT contains a Bayesian linear regression to predict total flight software development cost as a function of total spacecraft cost, as well as four analogic methods: k-Nearest Neighbors (kNN) and Clustering models to predict Effort (in work-months) and total source lines of code (SLOC). These methods are designed to work primarily with system-level inputs such as mission type (orbiter, lander, etc.), mission destination (Earth, Inner Planetary, etc.), and the number of instruments and deployables. Nonlinear principal components analysis (NLPCA) is performed to find the principal features of the data composed of both categorical and numerical variables and is necessary prior to defining our analogic methods. Sensitivity analyses and in- and out-of-sample model performance results are presented for the Bayesian CER and the analogic models.

Johnson, James K.↗
NASA NTRS1971

Integrated operations/payloads/fleet analysis. Volume 3: System costs. Appendix A: Program direct costs

Individualized program direct costs for each satellite program are presented. This breakdown provides the activity level dependent costs for each satellite program. The activity level dependent costs, or, more simply, program direct costs, are comprised of the total payload costs (as these costs are strictly program dependent) and the direct launch vehicle costs. Only those incremental launch vehicle costs associated directly with the satellite program are considered. For expendable launch vehicles the direct costs include the vehicle investment hardware costs and the launch operations costs. For the reusable STS vehicles the direct costs include only the launch operations, recovery operations, command and control, vehicle maintenance, and propellant support. The costs associated with amortization of reusable vehicle investment, RDT&E range support, etc., are not included.

Source record↗
NASA NTRS1972

Space tug economic analysis study. Volume 3: Cost estimates

Cost estimates for the space tug operation are presented. The subjects discussed are: (1) research and development costs, (2) investment costs, (3) operations costs, and (4) funding requirements. The emphasis is placed on the single stage tug configuration using various types of liquid propellants.

Source record↗
NASA NTRS1975

Research study on stabilization and control. Modern sampled-date control theory. Stability analysis of the low cost large space telescope system

A mathematical model employing Fourier series is used to show quantization and reaction wheel friction nonlinearity in a telescope system for use in space. Block diagrams are used to illustrate the system. A discrete describing function of a quantizer also is given, and input and output signal waveforms, with illustrative examples, are shown.

Kuo, B. C.↗
NASA NTRS1975

Research study on stabilization and control. Modern sampled-data control theory: Stability analysis of the low cost large space telescope system

The pointing stability of the low-cost large space telescope (LST) system was investigated. The low-cost LST is characterized by the use of reaction wheels for the generation of control torques. Because of the critical requirement on the pointing accuracy of the LST, the nonlinear frictional characteristics of the bearings of the reaction wheels were studied which can cause limit cycles in a closed-loop system. Another possible source of pointing error in the LST is due to the effect of quantization and sensor noise. Since the LST is a digital system, digital to analog and analog to digital converters and sensors for positional and rate feedbacks were used. Sensor noise and amplitude quantization causes pointing error in the LST and, in addition, quantization is a nonlinear phenomenon which can cause self-sustained oscillations in the closed-loop system. The dynamic modeling of the single-axis LST is described, and several methods of evaluating the attitude error of the digital LST due to quantization and noise inputs are given.

Kuo, B. C.↗
NASA NTRS1976

Radio frequency boresight analysis of the low cost 64-meter antenna

Configurations (two) of the reflector-only assemblies, using different width backup cones, are analyzed for RF boresight direction changes and wind distortions. The wider backup cone is best for minimum weight; however, there is an optimum weight which minimizes the RF boresight errors for a wind load that produces the maximum pitching moment of both configurations.

Katow, M. S.↗
NASA NTRS1979

Identification of high payoff research for more efficient applicator helicopters in agriculture and forestry

The results of a study of the uses of helicopters in agriculture and forestry in the United States are discussed. Comparisons with agricultural airplanes are made in terms of costs of aerial application to the growers. An analysis of cost drivers and potential improvements to helicopters that will lower costs is presented. Future trends are discussed, and recommendations for research are outlined. Operational safety hazards and accident records are examined, and problem areas are identified. Areas where research and development are needed to provide opportunities for lowering costs while increasing productivity are analyzed.

Waters, K. T.↗
NASA NTRS1983

Study for analysis of benefit versus cost of low thrust propulsion system

The benefits and costs associated with placing large space systems (LSS) in operational orbits were investigated, and a flexible computer model for analyzing these benefits and costs was developed. A mission model for LSS was identified that included both NASA/Commercial and DOD missions. This model included a total of 68 STS launches for the NASA/Commercial missions and 202 launches for the DOD missions. The mission catalog was of sufficient depth to define the structure type, mass and acceleration limits of each LSS. Conceptual primary propulsion stages (PPS) designs for orbital transfer were developed for three low thrust LO2/LH2 engines baselined for the study. The performance characteristics for each of these PPS was compared to the LSS mission catalog to create a mission capture. The costs involved in placing the LSS in their operational orbits were identified. The two primary costs were that of the PPS and of the STS launch. The cost of the LSS was not included as it is not a function of the PPS performance. The basic relationships and algorithms that could be used to describe the costs were established. The benefit criteria for the mission model were also defined. These included mission capture, reliability, technical risk, development time, and growth potential. Rating guidelines were established for each parameter. For flexibility, each parameter is assigned a weighting factor.

Hamlyn, K. M.↗
NASA NTRS1985

A cost-effective component modes analysis for Shuttle payloads using a combination of frequency domain and time domain approaches

A combination of the time and frequency domains which employs the latter only where the former is inefficient or uncertain is used in Space Shuttle payloads' component mode analyses. Attention is given to the time histories at the launch vehicle/spacecraft interface. The frequency domain allows interface acceleration to be determined without recourse to a new, merged system eigenvalue solution and subsequent 'system modal' responses. The approach has been employed in Galileo spacecraft loads analyses.

Trubert, M.↗
DOE OSTI2021

Techno-economic Analysis of Novel PV Plant Designs for Extreme Cost Reductions

A techno-economic analysis is underway examining the cost and performance of future large-scale photovoltaic (PV) plant components, including bifacial modules, tandem modules, increased plant voltage architectures, and module-level power electronics. Integration of these components into PV plant designs is compared with current PV technologies based on levelized cost of electricity (LCOE). Baseline models are developed and validated against recorded PV plant performance data. Expected cost and performance data of future PV technologies are incorporated into the baseline models. An evolutionary algorithm is utilized to optimize PV plant configuration, technology combination, and LCOE. This paper focuses on the bifacial module analysis.

14 SOLAR ENERGY↗
DOE OSTI2020

TeraChem Cloud: A High-Performance Computing Service for Scalable Distributed GPU-Accelerated Electronic Structure Calculations

The encapsulation and commoditization of electronic structure arise naturally as interoperability, and the use of nontraditional compute resources (e.g., new hardware accelerators, cloud computing) remains important for the computational chemistry community. Here, we present TERACHEM CLOUD, a high-performance computing service (HPCS) that offers on-demand electronic structure calculations on both traditional HPC clusters and cloud-based hardware. The framework is designed using off-the-shelf web technologies and containerization to be extremely scalable and portable. Within the HPCS model, users can quickly develop new methods and algorithms in an interactive environment on their laptop while allowing TERACHEM CLOUD to distribute ab initio calculations across all available resources. This approach greatly increases the accessibility of hardware accelerators such as graphics processing units (GPUs) and flexibility for the development of new methods as additional electronic structure packages are integrated into the framework as alternative backends. Cost-performance analysis indicates that traditional nodes are the most cost-effective long-term solution, but commercial cloud providers offer cutting-edge hardware with competitive rates for short-term large-scale calculations. We demonstrate the power of the TERACHEM CLOUD framework by carrying out several showcase calculations, including the generation of 300,000 density functional theory energy and gradient evaluations on medium-sized organic molecules and reproducing 300 fs of nonadiabatic dynamics on the B800-B850 antenna complex in LH2, with the latter demonstration using over 50 Tesla V100 GPUs in a commercial cloud environment in 8 h for approximately $1250.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

On 3D inelastic analysis methods for hot section components

Accomplishments are described for the 2-year program, to develop advanced 3-D inelastic structural stress analysis methods and solution strategies for more accurate and cost effective analysis of combustors, turbine blades and vanes. The approach was to develop a matrix of formulation elements and constitutive models. Three constitutive models were developed in conjunction with optimized iterating techniques, accelerators, and convergence criteria within a framework of dynamic time incrementing. Three formulations models were developed; an eight-noded mid-surface shell element, a nine-noded mid-surface shell element and a twenty-noded isoparametric solid element. A separate computer program was developed for each combination of constitutive model-formulation model. Each program provides a functional stand alone capability for performing cyclic nonlinear structural analysis. In addition, the analysis capabilities incorporated into each program can be abstracted in subroutine form for incorporation into other codes or to form new combinations.

Mcknight, R. L.↗