SEARCH · Engineering Papers

Results for “compression techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Simultaneous measurements of velocity and pressure fields in subsonic and supersonic flows through image-intensified detection of laser-induced fluorescence

An optical technique is presented for combined, spatially resolved measurements of two-dimensional velocity and pressure fields in compressible flows. The single-mode frequency of an argon laser is fixed in the wing of an absorption line of iodine molecules, seeded in an underexpanded round jet of nitrogen gas. The emitted fluorescence, being proportional to the amount of absorbed radiation and hence the absorption line-shape function, is detected with an intensified 100 x 100 photodiode array camera. A single-microchannel-plate image intensifier is fiber-optically coupled to the array in order to improve time resolution and SNR. Three components of the velocity vector in a cross-sectional plane are sequentially probed with four laser sheets from three different directions. By shifting the laser frequency in one of the sheets with a piezo-tuned intra-cavity etalon, the slope of the absorption line can be measured in situ in order to provide the required scaling factor for the velocity measurement. With its short measurement times of less than 250 ms, this method is well suited for blow-down wind tunnel experiments.

Hiller, B.↗

NASA NTRS1986

Shaping of airplane fuselages for minimum drag

The VSAERO surface panel method is employed to investigate fuselage shapes which can enhance the natural laminar flow (NLF) characteristics. The study is performed at cruise Re which are relevant to commuter, transport, and business aircraft. The technique is based on piecewise constant doublet and source singularities and takes into account the effects of compressibility. Inviscid pressure distributions were generated for five configurations to aid in the search for an optimized NLF body shape as a function of the transition locations and the drag coefficients. Granville's transition criteria are incorporated into the calculations to yield shapes with longer runs of laminar flow and reduced drag. In comparison with other transition prediction methods, the method described is shown to have significantly higher valicity for making three-dimensional transition predictions.

Dodbele, S. S.↗

NASA NTRS1986

A structural-stochastic model for the analysis and synthesis of cloud images

A structural-stochastic image model is developed for the analysis and synthesis of cloud images. The ability of the model to characterize the visual appearance of cloud fields observed by satellite with a limited number of parameters is demonstrated. The model merges structural and stochastic information, the stochastic model acting as a local statistical operator applied to the output of the structural model. The structural or large-scale organization of the scene is retrieved from the two-dimensional Fourier representation of the digital image. The pattern generated by the major Fourier components provides a first guess of the scene. The stochastic aspect is described by a Markov model of texture that assumes a binomial probability distribution for the local grey-level variability. This Markov model provides four parameters that represent the clustering strength in the horizontal, vertical and diagonal directions. These parameters are estimated by a standard maximum-likelihood technique. The image can be reproduced with a fair degree of verisimilitude from these parameters. The data compression factor is of the order of one hundred to several hundreds.

Garand, L.↗

NASA NTRS1987

Flow quality measurements in compressible subsonic flows

The purpose is to re-examine the heat transfer from a hot-wire probe in the compressible subsonic flow regime; describe the three-wire hot-wire probe calibration and data reduction techniques used to measure the velocity, density, and total temperature fluctuation; and present flow quality results obtained in the Langley 0.3 meter Transonic Cryogenic Wind Tunnel and in flight with the NASA JetStar from the same three-wire hot-wire probe.

Stainback, P. Calvin↗

NASA NTRS1991

Simulation Of Flow In A Turbine Cascade

Report discusses application of lower-upper (LU) implicit numerical-integration scheme, together with interactive grid-generation method, to simulation of inviscid, compressible flow in two-dimensional model of turbine cascade. Study part of continuing effort to develop techniques for computation of complicated three-dimensional flows in turbomachinery.

Choo, Yung K.↗

NASA NTRS1990

Domain decomposition methods in aerodynamics

Compressible Euler equations are solved for two-dimensional problems by a preconditioned conjugate gradient-like technique. An approximate Riemann solver is used to compute the numerical fluxes to second order accuracy in space. Two ways to achieve parallelism are tested, one which makes use of parallelism inherent in triangular solves and the other which employs domain decomposition techniques. The vectorization/parallelism in triangular solves is realized by the use of a recording technique called wavefront ordering. This process involves the interpretation of the triangular matrix as a directed graph and the analysis of the data dependencies. It is noted that the factorization can also be done in parallel with the wave front ordering. The performances of two ways of partitioning the domain, strips and slabs, are compared. Results on Cray YMP are reported for an inviscid transonic test case. The performances of linear algebra kernels are also reported.

Venkatakrishnan, V.↗

NASA NTRS1993

An integral equation solution for multistage turbomachinery design calculations

A method was developed to calculate flows in multistage turbomachinery. The method is an extension of quasi-three-dimensional blade-to-blade solution methods. Governing equations for steady compressible inviscid flow are linearized by introducing approximations. The linearized flow equations are solved using integral equation techniques. The flows through both stationary and rotating blade rows are determined in a single calculation. Multiple bodies can be modelled for each blade row, so that arbitrary blade counts can be analyzed. The method's benefits are its speed and versatility.

Mcfarland, Eric R.↗

NASA NTRS1992

Direct numerical simulation of laminar breakdown in high-speed, axisymmetric boundary layers

The compressible Navier-Stokes equations are solved using spectral collocation and high-order compact-difference techniques to simulate the laminar breakdown in high-speed, axisymmetric boundary-layer flow. Mach 4.5 flow along a hollow cylinder and Mach 6.8 flow along a sharp cone are considered. Data obtained replicate two previously unexplained phenomena, namely, the appearance of so-called 'rope-like waves' and 'the precursor transition effect', in which transitional flow originates near the critical layer well upstream of the transition location at the wall. The numerical data also reveal that neither of these effects can be explained, even qualitatively, by linear stability theory alone. It is shown that rope-like appearance arises from secondary instability. Certain features of the precursor transition effect also emerge from secondary instability but its nature is revealed to be fundamentally nonlinear.

Pruett, C. D.↗

NASA NTRS1994

Optical storage media data integrity studies

Optical disk-based information systems are being used in private industry and many Federal Government agencies for on-line and long-term storage of large quantities of data. The storage devices that are part of these systems are designed with powerful, but not unlimited, media error correction capacities. The integrity of data stored on optical disks does not only depend on the life expectancy specifications for the medium. Different factors, including handling and storage conditions, may result in an increase of medium errors in size and frequency. Monitoring the potential data degradation is crucial, especially for long term applications. Efforts are being made by the Association for Information and Image Management Technical Committee C21, Storage Devices and Applications, to specify methods for monitoring and reporting to the user medium errors detected by the storage device while writing, reading or verifying the data stored in that medium. The Computer Systems Laboratory (CSL) of the National Institute of Standard and Technology (NIST) has a leadership role in the development of these standard techniques. In addition, CSL is researching other data integrity issues, including the investigation of error-resilient compression algorithms. NIST has conducted care and handling experiments on optical disk media with the objective of identifying possible causes of degradation. NIST work in data integrity and related standards activities is described.

Podio, Fernando L.↗

NASA NTRS1980

Measurements of Unsteady Vortex Flowfields

A combined surface hot film and laser velocimeter measurement technique has been developed for the study of time-dependent turbulent flows. Data obtained in a compressible cylinder wake (M(sub infinity) = 0.6) are presented, and its structure in both the Eulerian and Lagrangian frames is discussed. Turbulence data obtained by conventional and phase averaging of the velocity fluctuations provide details of the small- and large-scale contributions to the total turbulent field.

Owen, F. K.↗

NASA NTRS1989

Proceedings of the Scientific Data Compression Workshop

Continuing advances in space and Earth science requires increasing amounts of data to be gathered from spaceborne sensors. NASA expects to launch sensors during the next two decades which will be capable of producing an aggregate of 1500 Megabits per second if operated simultaneously. Such high data rates cause stresses in all aspects of end-to-end data systems. Technologies and techniques are needed to relieve such stresses. Potential solutions to the massive data rate problems are: data editing, greater transmission bandwidths, higher density and faster media, and data compression. Through four subpanels on Science Payload Operations, Multispectral Imaging, Microwave Remote Sensing and Science Data Management, recommendations were made for research in data compression and scientific data applications to space platforms.

Ramapriyan, H. K.↗

NASA NTRS1992

Volume 2: Explicit, multistage upwind schemes for Euler and Navier-Stokes equations

The objective of this study was to develop a high-resolution-explicit-multi-block numerical algorithm, suitable for efficient computation of the three-dimensional, time-dependent Euler and Navier-Stokes equations. The resulting algorithm has employed a finite volume approach, using monotonic upstream schemes for conservation laws (MUSCL)-type differencing to obtain state variables at cell interface. Variable interpolations were written in the k-scheme formulation. Inviscid fluxes were calculated via Roe's flux-difference splitting, and van Leer's flux-vector splitting techniques, which are considered state of the art. The viscous terms were discretized using a second-order, central-difference operator. Two classes of explicit time integration has been investigated for solving the compressible inviscid/viscous flow problems--two-state predictor-corrector schemes, and multistage time-stepping schemes. The coefficients of the multistage time-stepping schemes have been modified successfully to achieve better performance with upwind differencing. A technique was developed to optimize the coefficients for good high-frequency damping at relatively high CFL numbers. Local time-stepping, implicit residual smoothing, and multigrid procedure were added to the explicit time stepping scheme to accelerate convergence to steady-state. The developed algorithm was implemented successfully in a multi-block code, which provides complete topological and geometric flexibility. The only requirement is C degree continuity of the grid across the block interface. The algorithm has been validated on a diverse set of three-dimensional test cases of increasing complexity. The cases studied were: (1) supersonic corner flow; (2) supersonic plume flow; (3) laminar and turbulent flow over a flat plate; (4) transonic flow over an ONERA M6 wing; and (5) unsteady flow of a compressible jet impinging on a ground plane (with and without cross flow). The emphasis of the test cases was validation of code, and assessment of performance, as well as demonstration of flexibility.

Elmiligui, Alaa↗

NASA NTRS1972

Feasibility study of applying an advanced composite structure technique to the fabrication of helicopter rotor blades

The fabrication of helicopter rotary wings from composite materials is discussed. Two composite spar specimens consisting of compressively prestressed stainless steel liner over-wrapped with pretensioned fiberglass were constructed. High liner strength and toughness together with the prescribed prestresses and final sizing of the part are achieved by means of cryogenic stretch forming of the fiber wrapped composite spar at minus 320 F, followed by release of the forming pressure and warm up to room temperature. The prestresses are chosen to provide residual compression in the metal liner under operating loads.

Gleich, D.↗

NASA NTRS2004

Extraterrestrial Hemorrhage Control: Terrestrial Developments in Technique, Technology, and Philosophy with Applicability to Traumatic Hemorrhage in Space

Managing injury and illness during long duration space flight limits efforts to explore beyond low earths orbit. Traumatic injury may be expected to occur in space and is a frequent cause of preventable deaths, often related to uncontrolled or ongoing hemorrhage (H). Such bleeding causes 40% of terrestrial injury mortality. Current guidelines emphasize early control of H compared to intravenous infusions. Recent advances in surgical and critical care may be applicable to trauma care in space, with appropriate considerations of the extreme logistical and personnel limitations. Methods: Recent developments in technique, resuscitation fluids, hemoglobin (Hb) substitutes, hemostatic agents, interventional angiography, damage control principles, and concepts related to suspended animation were reviewed. Results: H associated with instability frequently requires definitive intervention. Direct pressure should be applied to all compressible bleeding, but novel approaches are required for intracavitary noncompressible bleeding. Intravenous hemostatic agents such as recombinant Factor VII may facilitate hemostasis especially when combined with a controlled hypotension approach. Both open and laparoscopic techniques could be used in weightlessness, but require technical expertise not likely to be available. Specific rehearsed invasive techniques such as laparotomy with packing, or arterial catherterization with with robotic intravascular embolization might be considered . Hemodynamic support, thermal manipulation, or pharmacologic induction of a state of metabolic down regulation for whole body preservation may be appropriate. Hypertonic saline, with or without dextran, may temporize vascular support and decrease reperfusion injury, with less mass than other solutions. Hb substitutes have other theoretical advantages. Conclusions: Terrestrial developments suggest potential novel strategies to control H in space, but will required a coordinated program of evaluation and training to evaluate.

Kirkpatrick, Andrew↗

NASA NTRS1988

Identification of visual evoked response parameters sensitive to pilot mental state

Systems analysis techniques were developed and demonstrated for modeling the electroencephalographic (EEG) steady state visual evoked response (ssVER), for use in EEG data compression and as an indicator of mental workload. The study focused on steady state frequency domain stimulation and response analysis, implemented with a sum-of-sines (SOS) stimulus generator and an off-line describing function response analyzer. Three major tasks were conducted: (1) VER related systems identification material was reviewed; (2) Software for experiment control and data analysis was developed and implemented; and (3) ssVER identification and modeling was demonstrated, via a mental loading experiment. It was found that a systems approach to ssVER functional modeling can serve as the basis for eventual development of a mental workload indicator. The review showed how transient visual evoked response (tVER) and ssVER research are related at the functional level, the software development showed how systems techniques can be used for ssVER characterization, and the pilot experiment showed how a simple model can be used to capture the basic dynamic response of the ssVER, under varying loads.

Zacharias, G. L.↗

NASA NTRS1973

Low-closing-force seal

Compress soft, inert metal gasket between cone and corresponding socket to attach tubes to vessels containing gas samples. Technique effects seals with minimum of applied force and does not contaminate contents. Seal is formed when port connector is pushed firmly into its socket. Gold washer is deformed and forced to flow into imperfections in surfaces.

Bergquist, L. E.↗

NASA NTRS1976

Numerical solutions for laminar and turbulent viscous flow over single and multi-element airfoils using body-fitted coordinate systems

The technique of body-fitted coordinate systems is applied in numerical solutions of the complete time-dependent compressible and incompressible Navier-Stokes equations for laminar flow and to the time-dependent mean turbulent equations closed by modified Kolmogorov hypotheses for turbulent flow. Coordinate lines are automatically concentrated near to the bodies at higher Reynolds number so that accurate resolution of the large gradients near the solid boundaries is achieved. Two-dimensional bodies of arbitrary shapes are treated, the body contour(s) being simply input to the program. The complication of the body shape is thus removed from the problem.

Thompson, J. F.↗

NASA NTRS1983

Numerical solution of the Navier-Stokes equations for compressible turbulent two/three dimensional flows in the terminal shock region of an inlet/diffuser

The multidimensional, ensemble-averaged, compressible, time-dependent Navier-Stokes equations in conjunction with mixing length turbulence model and shock capturing technique have been used to study the terminal shock type of flows in various flight regimes occurring in a diffuser/inlet model. The numerical scheme for solving the governing equations is based on a linearized block implicit approach and the following high Reynolds number calculations have been carried out: (1) 2-D, steady, subsonic; (2) 2-D, steady, transonic with normal shock, (3) 2-D, steady, supersonic with terminal shock, (4) 2-D, transient process of shock development and (5) 3-D, steady, transonic with normal shock. The numerical results obtained for the 2-D and 3-D transonic shocked flows have been compared with corresponding experimental data; the calculated wall static pressure distributions agree well with the measured data. The predicted transient responses of the flow to externally applied impulsive disturbance are consistent with results obtained via asymptotic analysis.

Liu, N.-S.↗