Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compositional properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Colloidal synthesis and charge carrier dynamics of Cs 4 Cd 1-x Cu x Sb 2 Cl 12 (0 ≤ x ≤ 1) layered double perovskite nanocrystals

The toxicity and instability of lead-based metal halide perovskites are the two main obstacles that prevent perovskite materials from implementation in applications. Recently, layered double perovskites (LDPs) emerge as a new family of perovskite materials which provide a new route to solve these problems by lead-component replacement and reduction of crystal structure dimensionality. However, LDP nanocrystals (NCs) have been rarely studied, limiting the further property exploration and application realization. In this work, we report the colloidal synthesis of a series of Cs 4 Cd 1-x Cu x Sb 2 Cl 12 (0 ≤ x ≤ 1) LDP NCs by tuning the stoichiometry of metal precursors. The composition-structure-property relationships of the resulting LDP NCs are studied through materials characterizations, density functional theory calculations, and transient-absorption spectroscopy. In addition, we demonstrate that high-performance high-speed photodetectors can be fabricated using the colloidal LDP NCs through solution-processing. This work premises further expansion of such LDP-based materials for both fundamental studies and application integrations.

25 ENERGY STORAGE↗
NASA NTRS1965

Fiber-metal composites

Law-of-mixtures relationship applied to fiber-metal composites - Determination of yield strengths, tensile strengths, and other properties of composites

FIBER↗
NASA NTRS1995

Tensile Behavior of Al2o3/feal + B and Al2o3/fecraly Composites

The feasibility of Al2O3/FeAl + B and Al2O3/FeCrAlY composites for high-temperature applications was assessed. The major emphasis was on tensile behavior of both the monolithics and composites from 298 to 1100 K. However, the study also included determining the chemical compatibility of the composites, measuring the interfacial shear strengths, and investigating the effect of processing on the strength of the single-crystal Al2O3 fibers. The interfacial shear strengths were low for Al203/FeAl + B and moderate to high for Al203/FeCrAlY. The difference in interfacial bond strengths between the two systems affected the tensile behavior of the composites. The strength of the Al203 fiber was significantly degraded after composite processing for both composite systems and resulted in poor composite tensile properties. The ultimate tensile strength (UTS) values of the composites could generally be predicted with either rule of mixtures (ROM) calculations or existing models when using the strength of the etched-out fiber. The Al2O3/FeAl + B composite system was determined to be unfeasible due to poor interfacial shear strengths and a large mismatch in coefficient of thermal expansion (CTE). Development of the Al2O3/FeCrAlY system would require an effective diffusion barrier to minimize the fiber strength degradation during processing and elevated temperature service.

Draper, S. L.↗
NASA NTRS1980

Property changes of a graphite/epoxy composite exposed to nonionizing space parameters

A study has been made of the changes in the mass, thickness and flexural properties of initially wet and dry specimens of graphite/epoxy composite material due to the equivalent of eight weeks of exposure to nonionizing space environmental parameters. The parameters were near and middle solar UV irradiance, high vacuum, and temperature. The flexural properties were not affected by the exposures. Changes occurred to the mass, dimensions, and surface morphology of the specimens which varied with individual and combined parameter exposures. The combined UV and elevated thermal environment had synergistic effects on the properties of the specimens.

Phelps, H. R.↗
NASA NTRSDate not supplied

Game-Theoretic Modeling of Vegetation Composition, Structure, and Dynamics: Physical Constraints, Fundamental Processes, and Emergent Properties

Vegetation structural and compositional dynamics emerge from plant physiological and demographic processes, individual-based competition, vegetation-soil feedbacks, and environmental variations and disturbance events. Predicting long-term changes in vegetation requires scaling plant individual behavior to large scale ecosystem processes. In this presentation, we summarize our studies in the modeling of vegetation demographic processes, competitively dominant plant traits, plant hydraulic processes, and stochastic disturbance effects on ecosystems, and illustrate the roles of the underlying ecological processes and eco-evolutionary optimization in vegetation modeling. With the case studies of evolutionarily stable strategy of allocation, leaf traits, and plant hydraulic processes, we show how the ecosystem processes and vegetation dynamics are determined by the individual-based plant competition and variations of soil and climate conditions. The predictions of ecosystem carbon dynamics can be greatly different with those from the traditional “single-tree” models. We also discuss the tradeoffs of plant traits and evolutionarily optimal strategies in the modeling of terrestrial ecosystem dynamics in an Earth system model.

vegetation models↗
DOE OSTI2022

Printable Fiber Reinforced Cement Composites – Feasibility Study

Additive manufacturing is enabling the manufacturability of structures with previously unattainable complexity or functionality, and there is growing interest in additive manufacturing of “printed” concrete structures. The focus of this Phase 1 Technical Collaboration (TC) project was to evaluate feasibility of printing hybrid cement composite structures reinforced with textile carbon fibers (tCF). This project leverages other (non-IACMI) projects on cement formulation and printing process development, as well as on the production process for tCF. This project’s primary focus was to explore cement composite mix design with textile carbon fibers to be manufactured by MonteFibre (TC partner) and evaluate suitable fiber-matrix interface or sizing for cement composites working with Michelman (TC Partner). This project supports IACMI’s goal of reducing the cost and embodied energy of carbon fiber composites. Cost is one of the fundamental challenges to carbon fiber reinforced cement composites. Cement is an extremely inexpensive material (approximately $\$$0.05/lb). Adding 1 wt% of conventional carbon fiber to cement quadruples its cost. Therefore, the need to use low-cost carbon fiber and ensure that the additional cost of the carbon fiber has a greater cost benefit to the final product. This was the first preliminary evaluation to integrate tCF reinforcement in cement composites, and such potential tCF utilization should significantly reduce materials cost. Cement composite production is energy and emissions intensive, thus by strengthening it less material will be required. Hence, the embodied energy and production time of the resulting structures will be reduced. Additionally, integrating these new materials into additive processes can enable selective use of the material in high load or stress areas. It is noteworthy that past work in this field of fiber reinforced cement composites did not consider the optimization of fiber-matrix interface using suitable sizing. Carbon fiber reinforcement offers potential added benefits of thermal conductivity (which affects cure rate) and flow behavior that could provide opportunities for site specific utilization of carbon fiber on hybrid cement structures (e.g. use the fiber reinforcement on outer surfaces to enhance strength and modulus and then infiltrating the internal structures with conventional concrete). MonteFibre was the industry lead and planned on supplying the tCF for this project. However, during the short Phase-1 duration of this project, MonteFibre was unable to produce tCF for this project due to manufacturing plant being off-line throughout the course of the project. The project team decided to pursue an alternate option which involved demonstrating printable concrete with steel fibers by the ORNL lead, Dr. Brian Post. The University of Tennessee collaboration team focused on evaluating the suitable chemical sizing for carbon fibers working with Michelman and also developed methods for material characterization of cement-based composites to evaluate the material response for compression, shear, flexure, and tension. The two milestones for University of Tennessee, Knoxville were realized related to identification of one sizing suitable for carbon fiber reinforced cement composite and developing data associated with mechanical behavior of unreinforced (neat) and carbon fiber reinforced cement composites. ORNL could not complete the task of carbon fiber reinforced printed cement composites due to the reasons mentioned earlier, but was able to replace tCF with steel fibers to demonstrate the feasibility of printing with fiber reinforced cement composites. The Project team reviewed possible sizing chemistry available in collaboration with Michelman for use on carbon fiber reinforcement in cement composites and concrete applications. Our initial goal was to identify a sizing most promising for formulation with textile carbon fibers (tCF) to deliver excellent mechanical properties in composite material state. Since tCF was not available for this project as originally envisioned, the team continued this task to identify a suitable sizing for carbon fiber applications by applying such sizing to lower cost carbon fibers currently available commercially from Zoltek called Panex fibers. At a future time this can be optimized for textile carbon fibers from Montefibre. The bulk of previous work on carbon fiber reinforced cement has neglected the importance of fiber-matrix adhesion on mechanical properties of the cement composite and identifying this missing link was an important accomplishment for future research. Tensile behavior of fiber reinforced concrete is important to evaluate in order to realize the dream of concrete products that do not need reinforcing steel. Important sample preparation and testing procedures were addressed in this study and it was concluded that substantial improvements in tensile behavior, without compromising compressive strength, and improved ductility can result from the use of carbon fiber reinforcement.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Structural Carbon Nanotube Development

Mechanical properties of carbon nanotubes (CNTs) at the nanoscale suggest their potential to enable significantly lighter structures of interest in aerospace applications. As different formats of the material became available over the last 20 years, understanding of how CNTs contribute to improvements in mechanical properties of structural composites has evolved.Although the material is now available in large quantities that permit the development of composite fabrication processes, the retention of properties that make these materials attractive on the nano scale remains a challenge in large assemblies of CNTs. The work to be presented will summarize lessons learned in our efforts to produce carbon nanotube composites with tensile properties that begin to rival those of carbon fiber reinforced polymer composites. Challenges that need to be overcome for practical adoption of this emerging material system will be considered.

Carbon nanotube↗
DOE OSTI2024

Modulation of dielectric properties of hexagonal/cubic boron nitride composites

In this work, we synthesized mixed-phase hexagonal-boron nitride (h-BN)/cubic-BN (c-BN) composites with varying ratios and investigated their frequency and temperature-dependent dielectric properties. As the ratio of c-BN increased, we observed a corresponding increase in the dielectric constant of the composites. Furthermore, we used spark-plasma sintering (SPS) to treat the mixed-phase composite, which resulted in a phase transformation from mixed phase to pure h-BN phase. Remarkably, the composite exhibited an increase in dielectric constant after the SPS process, which can be attributed to the densification of the composite and the enhancement in grain size. Our approach presents a promising strategy for effectively modulating the dielectric properties of BN, which is crucial for advanced electronics.

Physics↗
DOE OSTI2022

Correlating electronic properties with M-site composition in solid solution Ti y Nb 2- y CT x MXenes

High electrical conductivity is desired in MXene films for applications such as electromagnetic interference shielding, antennas, and electrodes for electrochemical energy storage and conversion applications. Due to the acid etching-based synthesis method, it is challenging to deconvolute the relative importance that factors such as chemical composition and flake size contribute to resistivity. To understand the intrinsic and extrinsic contributions to the macroscopic electronic transport properties, a systematic study controlling compositional and structural parameters was conducted with eight solid solutions in the Ti y Nb 2-y CT x system. Here, in particular, we investigated the different roles played by metal (M)-site composition, flake size, and d-spacing on macroscopic transport. Hard x-ray photoemission spectroscopy and spectroscopic ellipsometry revealed changes to electronic structure induced by the M-site alloying. Consistent with the spectroscopic results, the low- and room-temperature conductivities and effective carrier mobility are correlated with the Ti content, while the impact of flake size and d-spacing is most prominent in low-temperature transport. The results provide guidance for designing and engineering MXenes with a wide range of conductivities.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Rheological, processing, and 371 deg C mechanical properties of Celion 6000/N-phenylnadimide modified PMR composites

The rheology, processing, and chemistry of newly developed N-phenylnadimide modified PMR (PMR-PN) polyimide resins are reviewed. The 371 C performance of their composites reinforced with Celion 6000 graphite fibers is also reviewed, along with the state of the art Celion 6000/PMR-15 composite. The effects of the 371 C exposure in air for up to 300 hr on the composite glass transition temperature, weight loss characteristics, and dimensional stability are presented. The changes in the composite 371 C interlaminar shear and flexural properties are also presented. In addition, composite interfacial degradation at a function of exposure time at 371 C was followed by scanning electron microscopy. The results suggest that the composite materials can be used at 371 C for at least 100 hr.

Pater, R. H.↗
DOE OSTI2023

Nanocomposite battery electrode particles with changing properties

Battery electrode compositions and methods of fabrication are provided that utilize composite particles. Each of the composite particles may comprise, for example, a high-capacity active material and a porous, electrically-conductive scaffolding matrix material. The active material may store and release ions during battery operation, and may exhibit (i) a specific capacity of at least 220 mAh/g as a cathode active material or (ii) a specific capacity of at least 400 mAh/g as an anode active material. The active material may be disposed in the pores of the scaffolding matrix material. According to various designs, each composite particle may exhibit at least one material property that changes from the center to the perimeter of the scaffolding matrix material.

Yushin, Gleb↗
DOE OSTI2023

Nanocomposite battery electrode particles with changing properties

Battery electrode compositions and methods of fabrication are provided that utilize composite particles. Each of the composite particles may comprise, for example, a high-capacity active material and a porous, electrically-conductive scaffolding matrix material. The active material may store and release ions during battery operation, and may exhibit (i) a specific capacity of at least 220 mAh/g as a cathode active material or (ii) a specific capacity of at least 400 mAh/g as an anode active material. The active material may be disposed in the pores of the scaffolding matrix material. According to various designs, each composite particle may exhibit at least one material property that changes from the center to the perimeter of the scaffolding matrix material.

Yushin, Gleb↗
NASA NTRS1998

IM7/LARC(tm) MPEI-1 Polymide Composites

LARC(Trademark) MPEI-1 (Langley Research Center(Trademark) modified phenylethynyl imide-1) phenylethynyl containing aromatic polymide, is based on the reaction of biphenyl dianhydride (BPDA), 3,4'-oxydianiline (3,4'-ODA), 1,3-bis(3-aminophenoxy)benzene (APB), 2,4,6-triaminopyrimidine (TAP) and 4-phenylethynyl phthalic anhydride (PEPA), presumably resulting in a mixture of linear, branched and star shaped phenylethynyl containing imides which was evaluated as a matrix for high-performance composites. The poly(amid acid) solution of MPEI-1 in N-methypyrrolidinone was synthesized at 35% and 42% solids. Unidirectional prepreg was fabricated from these solutions and Hercules IM7 carbon fiber utilizing NASA- Langley's multipurpose prepreg machine. The temperature-dependent volatile depletion rates, thermal crystallization behavior and resin theology were characterized. Based on this information, a composite molding cycle was developed which yielded well consolidated, void-free laminates. Composite mechanical properties such as short beam shear strength, longitudinal and transverse flexural strength and flexural modulus, longitudinal tensile strength and notched and unnotched compression strengths were measured at room temperature (RT) and elevated temperatures. These mechanical properties are compared with those of IM7/LARC(Trademark) PETI-5 composites.

Hou, T. H.↗
NASA NTRS2005

Preparation Torque Limit for Composites Joined with Mechanical Fasteners

Current design guidelines for determining torque ranges for composites are based on tests and analysis from isotropic materials. Properties of composites are not taken into account. No design criteria based upon a systematic analytical and test analyses is available. This paper is to study the maximum torque load a composite component could carry prior to any failure. Specifically, the torque-tension tests are conducted. NDT techniques including acoustic emission, thermography and photomicroscopy are also utilized to characterize the damage modes.

Thomas, Frank P.↗
NASA NTRS2016

Properties of Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Matrix Composites

For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strength- and stiffness-to-weight ratios, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Carbon nanotubes (CNT) offer the potential to enhance the multi-functionality of composites with improved thermal and electrical conductivity. In this study, hybrid CNT/carbon fiber (CF) polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing. Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated.

Cano, Roberto J.↗
NASA NTRS1983

Thermal and mechanical properties of advanced, high temperature ceramic-composite insulation

It is found that the mechanical properties of fibrous refractory composite insulation (FRCI) can be improved if a higher calcination temperature is used before final processing. The results also reveal that a higher density FRCI containing 60 wt pct aluminoborosilicate fibers will exhibit minimal surface recession at 1480 C in a convective-heating environment. Another finding is that the material performance in the convective-heating environment is limited by the coating and the temperature capability of its emittance agent. A table is included giving the coating compositions used with the composite insulation and tested in the convectively heated environment at a surface temperature of 1480 C.

Leiser, D. B.↗