Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compact objects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Parallel Implementation of the Discontinuous Galerkin Method

This paper describes a parallel implementation of the discontinuous Galerkin method. Discontinuous Galerkin is a spatially compact method that retains its accuracy and robustness on non-smooth unstructured grids and is well suited for time dependent simulations. Several parallelization approaches are studied and evaluated. The most natural and symmetric of the approaches has been implemented in all object-oriented code used to simulate aeroacoustic scattering. The parallel implementation is MPI-based and has been tested on various parallel platforms such as the SGI Origin, IBM SP2, and clusters of SGI and Sun workstations. The scalability results presented for the SGI Origin show slightly superlinear speedup on a fixed-size problem due to cache effects.

Baggag, Abdalkader↗
NASA NTRSDate not supplied

3-μm Spectroscopy of Phobos and Deimos

The origin of the Martian moons Phobos and Deimos is still not well understood and two scenarios have been proposed for their formation: in-situ and captured asteroid[1]. The in-situ scenario suggested that Phobos and Deimos were formed from Martian materials by co-accretion with Mars[2] or re-accretion of Mars (e.g.,[3],[4],[5]). The captured asteroid scenario proposed that Phobos and Deimos were formed from captured primitive materials originating from the outer solar system[6, 7]. Previous telescopic data have revealed significant information about Phobos’ and Deimos’ spectral properties [8,9,10,11]. Additionally, spacecraft and spec-trometers such as Observatoire pour la Mineralogie, L’Eau, Les Glaces et l’Activité (OMEGA) onboard Mars Express and the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) onboard Mars Reconnaissance Orbiter (MRO) collected visible to near-infrared imaging spectroscopic data of both Phobos and Deimos [12, 13,14,15]. Results from these investigations show that the two moons are moderately low albedo objects with no significant diagnostic absorptions of common ferrous minerals such as olivine and pyroxene. All these ground-and space-based spectroscopic studies of Phobos and Deimos included a spectral range that did not go beyond ~3.5 μm. Here we present spectra of Phobos and Deimos that cover the ~0.7-4 μmrange to search for signatures of hydrated minerals, organics, and carbonates.

D Takir↗
NASA NTRS1983

Mass loss from evolved stars. II - Radio continuum emission and evolution to planetary nebulae

The radio continuum properties of cool evolved stars are investigated from the viewpoint of mass loss mechanisms and evolution through the planetary nebula stage. The VLA was used to search 32 high mass loss rate objects for 6-cm continuum emission, leading to the detection of NGC 7027, CRL 618, R Aqr, IRC + 10216, and Omicron Ceti. The evolution of such objects to the planetary nebula stage was studied by calculating the propagation of an ionization front into the remnant neutral envelope that is produced by continuous mass loss in the red giant stage. It is found that none of the stars has a hot, compact companion, except for the known cases of R Aqr and Mira, and that envelope fractional ionization is in most cases as small as less than about 0.001.

Spergel, D. N.↗
NASA NTRS1992

Infrared emission in Seyfert 2 galaxies - Reprocessed radiation from a dusty torus?

New and existing data for a sample of nine Seyfert 2 galaxies with known 'ionization cones' are combined in order to test whether collimation results from shadowing of radiation from a small isotropic nuclear source by a thick dusty torus. The number of ionizing photons emitted by the compact nucleus is calculated from the emission-line ratios measured for gas within the cones. On the assumption that this compact nuclear source radiates isotropically, the optical-UV power incident on the torus, which is expected to be reradiated in the IR, is determined. It is found that the observed IRAS luminosities are consistent with the torus model in eight of the nine objects with sufficient data to perform the calculation. It is concluded that the data are generally consistent with collimation and reradiation by a dusty torus.

Storchi-Bergmann, Thaisa↗
NASA NTRS1993

An atlas of ultraviolet spectra of star-forming galaxies

A systematic study is presented of the UV spectra of star-forming galaxies of different morphological type and activity class using a sample drawn from a uniformly reduced IUE data set. The spectra for a wide variety of galaxies, including normal spiral, LINER, starburst, blue compact, blue compact dwarf, and Seyfert 2 galaxies, are presented in the form of spectral energy distributions to demonstrate the overall characteristics according to morphology and activity class and in the form of absolute flux distributions to better show the absorption and emission features of individual objects. The data support the picture based on UV spectra of the Orbiting Astronomical Observatory and of the Astronautical Netherlands Satellite that spiral galaxies of later Hubble class have more flux at the shortest UV wavelengths than do spiral galaxies of earlier Hubble class.

Kinney, A. L.↗
NASA NTRS1996

Compact Outflows Associated With TMC1 and TMC1A

High spatial resolution observations are presented of the compact outflows associated with the young protostars TMC1 (IRAS 04381+2535) in Taurus. Emission in CO (1-0) imaged with the Owens Valley millimeter array shows the outflow lobes to be conical close to the star. Analysis of the outflow dynamics indicates that these objects are low-luminosity versions of the energetic outflows more commonly observed.

stars star formation ISM jets outflows reflection ↗
NASA NTRS2017

S-band Smallsat InSAR Constellation for Surface Deformation Science

Surface deformation studies using repeat-pass interferometric SAR have evolved into a powerful tool for geophysicists studying earthquake fault zones, volcanoes, ice sheet motion, and subterranean aquifers. Longer wavelengths (S-Band and L-Band) are preferred because they do not decorrelate as quickly as shorter wavelengths. Rapid revisit (1-3 days) is preferred because it allows the study of these phenomena at the timescales at which they commonly occur. Global access on such timescales is also required. Vector surface deformation measurements, taken from more than one direction, are a desired feature. This paper describes the conceptual architecture of a longer wave length, Smallsat SAR constellation of up to 12 satellites for rapid revisit surface deformation studies. The key to making such a constellation affordable is to lower launch costs, spacecraft costs, and instrument (SAR) costs. The first two objectives can be achieved using an ESPA-ring class, or Smallsat spacecraft. The third objective requires a SAR instrument sized to fit the mass and volume constraints imposed by such a spacecraft. Current state-of-the-art in miniaturization of electronics means that the radar transmit, receive and data handling functions can easily be implemented in a compact, low mass solution. The most significant challenge in designing a SAR to fit the Smallsat paradigm is in the dimensions of the antenna. The antenna sizing problem is addressed by adopting a smaller antenna than allowed by conventional SAR design rules. The baseline antenna design is simple, requiring no electronic beam-steering or beam-forming capability. Both reflectarray and microstrip patch antenna solutions are considered. The antenna structure is dual-purpose, to limit the overall system mass, with solar panels on the backplane providing power for the radar and spacecraft. The proposed solution easily accommodates radar squint angles of +/-30 degrees for repeat-pass interferometry measurements from multiple direct

Freeman, Anthony↗
NASA NTRS2005

X-rays from Cepheus A East and West

We report the discovery of X-rays from both components of Cepheus A, East and West, with the XMM-Newton observatory. HH 168 joins the ranks of other energetic Herbig-Haro objects that are sources of T ≥ 10(6) K X-ray emission. The effective temperature of HH 168 is T = 5.8(-2.3)(+3.5) x 10(6) K, and its unabsorbed luminosity is 1: 1; 10(29) ergs s(-1), making it hotter and less luminous than other representatives of its class. We also detect prominent X-ray emission from the complex of compact radio sources believed to be the power sources for Cep A. We call this source HWX, and it is distinguished by its hard X-ray spectrum, T = 1.2(-0.5)(+1.2) 10(8) K, and its complex spatial distribution. It may arise from one or more protostars associated with the radio complex, the outflows, or a combination of the two. We detect 102 X-ray sources, many presumed to be pre-main-sequence stars on the basis of the reddening of their optical and IR counterparts.

Herbig-Haro objects↗
NASA NTRS2017

A CFD Case Study of a Fan Stage with Split Flow Path Subject to Total Pressure Distortion Inflow

This report is the documentation of the work performed under the Hypersonic Project of the NASA's Fundamental Aeronautics Program. It was funded through Task Number NNC10E444T under GESS-2 Contract NNC06BA07B. The objective of the task is to develop advanced computational tools for the simulation of multi-stage turbomachinery in support of aeropropulsion. This includes work elements in extending the TURBO code and validating the multi-stage URANS (Unsteady Reynolds Averaged Navier Stokes) simulation results with the experimental data. The unsteady CFD (Computation Fluid Dynamics) calculations were performed in full wheel mode with and without screen generated total pressure distortion at the computational inflow boundary, as well as in single passage phase lag mode for uniform inflow. The experimental data were provided by NASA from the single stage RTA (Revolutionary Turbine Accelerator) fan test program.Significant non-uniform flow condition at the fan-face of the aeropropulsion system is frequentlyencountered in many of the advanced aerospace vehicles. These propulsion systems can be eithera podded or an embedded design employed in HWB (Hybrid Wing Body) airframe concept. It isalso a topic of interest in military applications, in which advanced air vehicles have already deployedsome form of embedded propulsion systems in their design because of the requirementsof compact and low observable inlets. Even in the conventional airframe/engine design, the fancould operate under such condition when the air vehicle is undergoing rapid maneuvering action.It is believed that a better understanding of the fan’s aerodynamic and aeromechanical responseto this type of operating condition or off design operation would be beneficial to designing distortiontolerant blades for improved engine operability.The objective for this research is to assess the capability of turbomachinery code as an analysistool in understanding the effects and evaluating the impact of flow distortion on the aerodynamicand aeromechanical performance of the fan in advanced propulsion systems. Results from thetesting of an advanced fan stage released by NASA are available and will be used here for CFDcode validation. The experiment was performed at NASA’s high speed compressor facility aspart of the RTA (Revolutionary Turbine Accelerator) demonstration project, a joint effort ofNASA Glenn Research Center and GE Aircraft Engines in developing an advanced Mach 4TBCC (Turbine Based Combined Cycle) turbofan/ramjet engine for access to space. Part of thetest was to assess the aerodynamic performance and operability of the fan stage under nonuniforminflow condition. Various flow distortion patterns were created at the fan-face by manipulatingsets of screens placed upstream of the wind tunnel. Measurements at the fan-face willprovide the necessary distortion flow information as the inflow boundary condition for the CFDin a full wheel simulation. Therefore the purpose of this work is to demonstrate the NASA supportedmulti-stage turbomachinery code, TURBO [1-5], in the aerodynamic performance analysisof a modern fan design operating under off design condition, and in particular to validate theCFD results with the RTA fan test data.A brief description of the RTA fan rig configuration is given in the next section, explaining onhow flow distortion were measured in the test and constructed for the CFD at the fan-face. It isfollowed by a section summarizing previous CFD work performed at NASA relevant to the currentfan configuration. A short description of the TURBO code is given next, followed by detailsin the computational model of the fan rig, the required computing resources, and the numericalprocedure for the simulations. The CFD results are presented in the discussion section and finallyconcluding remarks are summarized.

Fan Stage↗
NASA NTRSDate not supplied

The NASA Advanced Composite Solar Sail System (ACS3) Flight Demonstration: A Technology Pathfinder for Practical Smallsat Solar Sailing

NASA’s Space Technology Mission Directorate (STMD) is developing a new generation of compactly packageable composite booms designed specifically for small spacecraft applications where volumes for deployable structures are limited. NASA’s Advanced Composite Solar Sail System (ACS3) will be the first spaceflight application of this boom technology. ACS3 will also be NASA’s first practical solar sail. Objectives of the ACS3 project are to deploy an 80 m2composite boom solar sail in low Earth orbit, and as an extended goal, demonstrate controlled solar sailing flight, including orbit raising and lowering. An overview of the ACS3 project and objectives, including descriptions of ACS3’s solar sail structures and materials technology, 12U CubeSat spacecraft systems, and flight concept of operations, is provided here. Scalability of the ACS3 solar sail to future, near-term smallsat solar sailing mission requirements will also be discussed. Launch of ACS3 is currently anticipated for mid to late 2022.

Keats Wilkie↗
NASA NTRSDate not supplied

Advanced Radiation Detectors and Detector Systems Research

Real‐time awareness of space radiation is critical for missions beyond LEO. Missions to the Moon, Mars, Near‐Earth‐Objects (NEOs), inner and outer planets, as well as other destinations in space, will require embedded instrumentation to provide feedback for “smart”, adaptive control systems. Precision instrumentation will also be needed to provide improved data for space radiation modeling and space weather forecasting and awareness. Compact instrumentation on small platforms such as CubeSats and other small space‐faring vehicles will provide a better understanding of the space radiation environment by supplying data from multiple locations in space where information is yet unknown. Compact integrable solid‐state detectors with low noise and high tolerance of operation in a radiation environment are enabled by the application of Wide Band Gap semiconductors as radiation detectors. NASA Glenn Research Center (GRC) is applying its expertise and facilities in harsh environment instrumentation to develop supporting technologies that enable improved instruments for space science missions. A variety of radiation detectors are under development, such as silicon carbide semiconductor detectors, for applications to space science, lunar prospecting, and fission power systems.

Field and particle detectors↗
NASA NTRS1971

Classification of radiating compact stars

A classification of compact stars, depending on the electron distribution in velocity space and the density profiles characterizing their magnetospheric plasma, is proposed. Fast pulsars, such as NP 0532, X-ray sources such as Sco-X1, and slow pulsars are suggested as possible evolutionary stages of similar objects. The heating mechanism of Sco-X1 is discussed in some detail.

Coppi, B.↗
NASA NTRS1988

Grasping with mechanical intelligence

Many robotic hands have been designed and a number have been built. Because of the difficulty of controlling and using complex hands, which usually have nine or more degrees of freedom, the simple one- or two-degree-of-freedom gripper is still the most common robotic end effector. A new category of device is presented: a medium-complexity end effector. With three to five degrees of freedom, such a tool is much easier to control and use, as well as more economical, compact and lightweight than complex hands. In order to increase the versatility, it was necessary to identify grasping primitives and to implement them in the mechanism. In addition, power and enveloping grasps are stressed over fingertip and precision grasps. The design is based upon analysis of object apprehension types, requisite characteristics for active sensing, and a determination of necessary environmental interactions. Contained are the general concepts necessary to the design of a medium-complexity end effector, an analysis of typical performance, and a computer simulation of a grasp planning algorithm specific to this type of mechanism. Finally, some details concerning the UPenn Hand-a tool designed for the research laboratory-are presented.

Ulrich, Nathan Thatcher↗
NASA NTRS1991

Millimeter and submillimeter observations of nearby radio galaxies

Radio galaxies are often observed to be strong long wavelength infrared sources. Twenty-six radio galaxies with strong compact cores were observed at wavelengths near 1 mm with the James Clerk Maxwell Telescope on Mauna Kea, Hawaii. The detections and upper limits establish the presence of excess infrared emission for almost all of the galaxies in the sample. The exceptions are the BL Lac objects, which have smooth continuous spectra from radio to infrared wavelengths. The spectral energy distributions of the infrared emission from the radio galaxies favor a thermal origin due to emission from cool interstellar dust. The amounts of dust inferred to be present approach those observed in large spirals.

Knapp, G. R.↗
NASA NTRSDate not supplied

A New Approach for a Wider Class of Entropy Split Methods for Compressible Gas Dynamics and MHD

The high order entropy split methods of Sjögreen & Yee [1, 2] by entropy splitting of the compressible Euler (inviscid) flux derivatives for a thermally-perfect gas are based on Harten’s entropy function [3, 4, 5]. Their derivation takes advantage of the homogeneity property of Euler flux, symmetrizable Euler flux derivatives and energy-norm stability in conjunction with high order classical spatial central, DRP (dispersion relation-preserving) [6, 7, 8] or Padé (compact) spatial discretizations [9] with summation-by-parts (SBP) operators [10]. Our entropy split methods have been proven entropy conserving and stable [1, 11, 12]. Our proofs do not rely on a two-point numerical flux, but rather only a linear difference operator is required to derive these methods. To extend the entropy split method for the MHD, we used the Godunov symmetrizable non-conservative MHD form [12, 13, 14]. These high order entropy split methods not only preserve certain physical properties of the chosen governing equations but are also known to either improve numerical stability, and/or minimize aliasing errors in long time integration of turbulent flow computations without the aid of added numerical dissipation. In our previous published work, extensive error norm comparison with grid refinement was performed to show the high accuracy performance of these methods. These studies also showed how well the entropy split methods conserve the entropy, momentum and mass, and preserve the kinetic energy for long time integration of the various flows [1, 2, 12, 13, 14]. The objective of the present work is to use a new approach to obtain a wider class of entropy split methods consisting of a two-point numerical flux portion and a non-conservative portion in such a way that the homogeneity property of the compressible Euler flux is not required. For high order classical spatial central, DRP (dispersion relation-preserving) or Padé (compact) spatial discretizations, this new approach can be proven to be entropy conservative with conservative spatial dsicretizations while at the same time allowing a wider class of symmetrizable inviscid flux derivatives. We also use this generalization to derive an entropy split scheme that is entropy conserving for the equations of MHD without the homogeneity property using the Godunov symmetrizable ideal MHD formulation [15].

High Order Physical Preserving Methods↗
NASA NTRS1989

Near-IR imaging and imaging polarimetry of OMC 2

NIR and 2.2-micron imaging polarimetry of the molecular cloud region OMC 2, reveals a cluster of low- to intermediate-mass premain-sequence stars embedded in circumstellar disks. The 2.2-micron imaging polarimetry indicates that the compact NIR sources OMC 2 IRS1, IRS2, IRS3 and IRS4 N, are illumination centers for the surrounding extended emission. By application of Hubble's relation to the nebulae illuminated by IRS1, IRS2 and IRS4 N, the illuminating geometry is explained and the intrinsic NIR colors of these objects are estimated.

Rayner, John↗
NASA NTRS1989

Hybrid propulsion technology program: Phase 1, volume 1

A number of booster propulsion system concepts are being considered for the next generation of manned and unmanned space launch vehicles. The one propulsion system concept that has potential for reducing costs with increased safety, reliability, and performance is hybrid propulsion (HP). A HP system may be thought of as a liquid propulsion system with solid fuel or a solid propulsion system with a liquid oxidizer. The liquid propulsion features that are most attractive are the higher specific impulse, clean exhaust, separated propellants, and oxidizer loading just prior to launch. The most attractive solid propulsion features includes low life cycle costs, no rotating machinery, compact size, and a robust case. In addition, a HP system has a robust LO2 tank; provides thrust control for ignition, to alleviate flight loads, and for thrust termination; and uses an inert grain that is not sensitive to anomalies such as cracks, voids, and separations. The object is to develop the technology to enable the application of HP to manned and unmanned space launch vehicles. This program will identify the necessary technology, acquire that technology, and demonstrate that technology. This volume is the executive summary.

Schuler, A. L.↗
NASA NTRS1993

An Imaging Interferometer for Terrestrial Remote Sensing

A prototype imaging interferometer called DASI (digital array scanned interferometer) is under development at our laboratories. Our objective is to design an instrument for remote sensing of Earth's atmosphere and surface. This paper describes the unusual characteristics of DASIs which make them promising candidates for ground and aircraft-based terrestrial measurements. These characteristics include superior signal-to-noise, design simplicity and compactness, relative to dispersion based imaging spectrometers. Perhaps one of the most notable features of DASIs is their ability to acquire an entire interferogram simultaneously without any moving optical elements. We also describe selected laboratory and ground based field measurements using the prototype DASI. A CCD detector array was placed at the DASI detector plane for wavelength coverage from 0.4 to 1.0 micron. A NICMOS MCT detector was used for coverage from 1.1 to 2.2 micron. The DASI was configured to have a spectral resolution of about 300 1/cm, a spatial field of view of 5 degrees, and a constant number of transverse spatial elements (detector dependent) for each exposure frame. Frame exposure rates were up to 0.6 Hz with the potential to achieve 5 Hz. Image cube measurements of laboratory targets and terrestrial scenes were obtained by multiple frame scanning over the field of view. These data sets reveal the potential science yields from obtaining simultaneous high resolution spatial and spectral information.

Hammer, Philip D.↗