Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coherent detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Simultaneous measurements of the magnetopause and flux transfer events at widely separated sites by AMPTE UKS and ISEE 1 and 2

On September 19, 1984, the ISEE 1 and 2 and AMPTE UKS and IRM spacecraft pairs crossed the dayside magnetopause at nearly the same universal time and magnetic local time but at much different latitudes. This fortuitous ocurrence allows the magnetopause and flux transfer events (FTEs) to be studied at two widely separated sites simultaneously. FTEs are observed at both locations, those at UKS having standard normal component signatures, while those at ISEE have reverse signatures. The FTEs at UKS, closer to the equator, appear to have less helicity, or 'twistedness' than those at ISEE far to the south. By identifying FTEs using the stringent Rijnbeek et al. (1984) criterion for the bipolar B(n) signature it might be concluded that FTEs are not necessarily detected simultaneously at UKS and ISEE. However, careful analysis of the field strength behavior at ISEE does reveal evidence that FTEs are indeed observed at both sites simultaneously. While within the magnetosphere, AMPTE and ISEE both observe a coherent field rarefaction coupled with a tilt; it is speculated that the signature is associated with time-dependent dayside magnetopause reconnection.

Elphic, R. C.↗
NASA NTRS2002

Nonlinear Internal Waves in the South China Sea During ASIAEX

Internal wave distribution maps have been compiled from more than one hundred ERS-1/2, RADARSAT and Space Shuttle SAR images in the South China Sea (SCS) from 1993 to 2000. Based on these distribution maps, most of internal waves in the northeast part of SCS were propagating westward. The wave crest can be as long as 200 km with amplitude of 100 m, due to strong current from the Kuroshio branching out into the SCS. In recent Asian Seas International Acoustics Experiment (ASIAEX), moorings have been deployed in April 2000 and May 2001. Simultaneous RADARSAT ScanSAR images have been collected during the field test to integrate with the model and the in-situ measurements in the SCS. During ASIAEX in May 2001, many large internal waves were observed at the test area and were the major features for acoustic volume interaction. The environmental parameters have been calculated based on extensive CTD castings and mooring data. Nonlinear internal wave models have been applied to simulate the wave evolution on the continental shelf and the results compare reasonably with mooring measurements. The evolution and dissipation of huge internal waves on the shelf break, mode-two waves, elevation waves, and wave-wave interaction are very important issues for acoustic propagation. The implication of internal wave effects on acoustic propagation will also be discussed.

ACOUSTIC PROPAGATION↗
NASA NTRS2003

Design of an L-band Microwave Radiometer with Active Mitigation of Interference

Radio frequency interference (RFI) impairs L-band radiometry outside the protected 20 MHz frequency band around 1413 MHz. However, bandwidths of 100 MHz or more are desired for certain remote sensing applications as well as certain astronomy applications. Because much of the RFI in this band is from radars with pulse lengths on the order of microseconds, traditional radiometers (i.e., those which directly measure total power or power spectral density integrated over time scales of milliseconds or greater) are poorly-suited to this task. Simply reducing integration time and discarding contaminated outputs may not be a practical answer due to the wide variety of modulations and pulse lengths observed in L-band RFI signals, the dynamic and complex nature of the associated propagation channels, and the logistical effort associated with post-measurement data editing. This motivates the design and development of radiometers capable of coherent sampling and adaptive, real-time mitigation of interference. Such a radiometer will be described in this presentation. This design is capable of coherently-sampling up to 100 MHz bandwidth at L-band. RFI mitigation is implemented in FPGA components so that real-time suppression is achieved. The system currently uses a cascade of basic time- and frequency- domain detection and blanking techniques; more advanced algorithms are un- der consideration. The modular FPGA-based architecture provides other benefits, such as the ability to implement extremely stable digital filters and the ability to reconfigure the system "on the fly". An overview of the basic design along with on-the-air results from an initial implementation will be provided in the presentation. Related L-band RFI surveys will be described to illustrate the relevance of this approach in a variety of operating conditions.

Ellingson, S. W.↗
DOE OSTI2024

Designed 2D protein crystals as dynamic molecular gatekeepers for a solid-state device

The sensitivity and responsiveness of living cells to environmental changes are enabled by dynamic protein structures, inspiring efforts to construct artificial supramolecular protein assemblies. However, despite their sophisticated structures, designed protein assemblies have yet to be incorporated into macroscale devices for real-life applications. We report a 2D crystalline protein assembly of C98/E57/E66 L-rhamnulose-1-phosphate aldolase ( CEE RhuA) that selectively blocks or passes molecular species when exposed to a chemical trigger. CEE RhuA crystals are engineered via cobalt(II) coordination bonds to undergo a coherent conformational change from a closed state (pore dimensions <1 nm) to an ajar state (pore dimensions ~4 nm) when exposed to an HCN(g) trigger. When layered onto a mesoporous silicon (pSi) photonic crystal optical sensor configured to detect HCN (g) , the 2D CEE RhuA crystal layer effectively blocks interferents that would otherwise result in a false positive signal. The 2D CEE RhuA crystal layer opens in selective response to low-ppm levels of HCN (g) , allowing analyte penetration into the pSi sensor layer for detection. These findings illustrate that designed protein assemblies can function as dynamic components of solid-state devices in non-aqueous environments.

36 MATERIALS SCIENCE↗
NASA NTRS1997

Timing the Geminga Pulsar with High-Energy Gamma-Rays

This is a continuing program to extend and refine the ephemeris of the Geminga pulsar with annual observations for the remaining lifetime of EGRET. The data show that every revolution of Geminga is accounted for during the EGRET epoch, and that a coherent timing solution linking the phase between EGRET, COS-B, amd SAS-2, observations has now been achieved. The accuracy of the gamma-ray timing is such that the proper motion of the pulsar can now be detected, consistent with the optical determination. The measured braking index over the 24.2 yr baseline is 17 +/- 1. Further observation is required to ascertain whether this very large braking index truly represents the energy loss mechanism, perhaps related to the theory in which Geminga is near its gamma-ray death line, or whether it is a manifestation of timing noise. Statistically significant timing residuals are detected in the EGRET data; they depart from the cubic ephemeris at a level of 23 milliperiods. The residuals appear to have a sinusoidal modulation with a period of about 5.1 yr. This could simply be a manifestation of timing noise, or it could be consistent with a planet of mass 1.7/sin i solar mass orbiting Geminga at a radius of 3.3/sin i AU.

Halpern, Jules P.↗
NASA NTRS2003

Design of an L-band Microwave Radiometer with Active Mitigation of Interference

Radio frequency interference (RFI) impairs L-band radiometry outside the protected 20 MHz frequency band around 1413 MHz. However, bandwidths of 100 MHz or more are desired for certain remote sensing applications as well as certain astronomy applications. Because much of the RFI in this band is from radars with pulse lengths on the order of microseconds, traditional radiometers (i.e., those which directly measure total power or power spectral density integrated over time scales of milliseconds or greater) are poorly-suited to this task. Simply reducing integration time and discarding contaminated outputs may not be a practical answer due to the wide variety of modulations and pulse lengths observed in L-band RFI signals, the dynamic and complex nature of the associated propagation channels, and the logistical effort associated with post-measurement data editing. This motivates the design and development of radiometers capable of coherent sampling and adaptive, real-time mitigation of interference. Such a radiometer will be described in this presentation. This design is capable of coherently-sampling up to 100 MHz bandwidth at L-band. RFI mitigation is implemented in FPGA components so that real-time suppression is achieved. The system currently uses a cascade of basic time- and frequency-domain detection and blanking techniques; more advanced algorithms are under consideration. The modular FPGA-based architecture provides other benefits, such as the ability to implement extremely stable digital filters and the ability to reconfigure the system "on the fly". An overview of the basic design along with on-the-air results from an initial implementation will be provided in the presentation. Related L-band RFI surveys will be described to illustrate the relevance of this approach in a variety of operating conditions.

Hampson, G. A.↗
NASA NTRSDate not supplied

Mirror Surface Contamination Specification Derived from Coronagraphy Scatter Error Budget Allocation

Near-Angle Scatter (NAS) of the host star’s light may limit the ability of a potential Habitable Worlds Observatory (HWO) to detect and characterize an Earth-like planet around a Sun-like star via coronagraphy. NAS from each optical surface before the coronagraph’s focal plane mask produces an E-field across the dark hole that is coherent. These E-fields sum and could be as large or larger than the coronagraph mask leakage E-field. This paper assumes an error budget allocation for scatter of 20 ppt. NAS E-fields contribute to the dark hole noise floor via both shot noise and heterodyne amplification of the wavefront instability. While previous papers have developed specifications for scatter from surface scatter, this paper develops specifications for scatter from surface contamination and micrometeoroid impacts. The development process utilizes an expression that predicts scatter throughput into the dark hole based on surface BRDF. Analysis does not include scatter from coating columnar structure, edges, contamination, micrometeoroid impacts, or polarization.

near angle scatter↗
DOE OSTI2021

Mapping wave packet bifurcation at a conical intersection in CH 3 I by attosecond XUV transient absorption spectroscopy

Extreme ultraviolet (XUV) transient absorption spectroscopy has emerged as a sensitive tool for mapping the real-time structural and electronic evolution of molecules. Here, attosecond XUV transient absorption is used to track dynamics in the A-band of methyl iodide (CH 3 I). Gaseous CH 3 I molecules are excited to the A-band by a UV pump (277 nm, ~20 fs) and probed by attosecond XUV pulses targeting iodine I(4d) core-to-valence transitions. Owing to the excellent temporal resolution of the technique, passage through a conical intersection is mapped through spectral signatures of nonadiabatic wave packet bifurcation observed to occur at 15 ± 4 fs following UV photoexcitation. The observed XUV signatures and time dynamics are in agreement with previous simulations [H. Wang, M. Odelius, and D. Prendergast, J. Chem. Phys. 151, 124106 (2019)]. Furthermore, due to the short duration of the UV pump pulse, coherent vibrational motion in the CH 3 I ground state along the C-I stretch mode (538 ± 7 cm -1 ) launched by resonant impulsive stimulated Raman scattering and dynamics in multiphoton excited states of CH 3 I are also detected.

36 MATERIALS SCIENCE↗
DOE OSTI2020

MIRC-X: A Highly Sensitive Six-telescope Interferometric Imager at the CHARA Array

Michigan InfraRed Combiner-eXeter (MIRC-X) is a new highly sensitive six-telescope interferometric imager installed at the CHARA Array that provides an angular resolution equivalent of up to a 330 m diameter baseline telescope in J- and H-band wavelengths ((λ/(2B))∼0.6 mas). We upgraded the original Michigan InfraRed Combiner (MIRC) instrument to improve sensitivity and wavelength coverage in two phases. First, a revolutionary sub-electron noise and fast-frame-rate C-RED ONE camera based on an SAPHIRA detector was installed. Second, a new-generation beam combiner was designed and commissioned to (i) maximize sensitivity, (ii) extend the wavelength coverage to J band, and (iii) enable polarization observations. A low-latency and fast-frame-rate control software enables high-efficiency observations and fringe tracking for the forthcoming instruments of the CHARA Array. Since mid-2017, MIRC-X has been offered to the community and has demonstrated best-case H-band sensitivity down to 8.2 correlated magnitude. MIRC-X uses single-mode fibers to coherently combine the light from six telescopes simultaneously with an image-plane combination scheme and delivers a visibility precision better than 1%, and closure phase precision better than 1°. MIRC-X aims at (i) imaging protoplanetary disks, (ii) detecting exoplanets with precise astrometry, and (iii) imaging stellar surfaces and starspots at an unprecedented angular resolution in the near-infrared. In this paper, we present the instrument design, installation, operation, and on-sky results, and demonstrate the imaging capability of MIRC-X on the binary system ι Peg. The purpose of this paper is to provide a solid reference for studies based on MIRC-X data and to inspire future instruments in optical interferometry.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

A very high frequency radio interferometer for investigating ionospheric disturbances using geostationary satellites. Determination of changes in exospheric electron content by a comparison of group delay and Faraday rotation

The theory and development of a VHF correlation radio interferometer for investigating ionospheric disturbances are discussed. The system was developed to receive signals from the geostationary Applications Technology Satellites. Amplitude and phase variations of the signal passing through the ionosphere can be detected by this instrument. The system consists of two superheterodyne receivers separated by a distance known as the baseline of the system. Since the system is a phase sensitive instrument, the local oscillators of the two receivers must be phase coherent. This is accomplished by using phase-locked loops for generating the local oscillators. The two signals from the separate receivers are cross-correlated by multiplying the two signals together and then time averaging the result. The sensitivity of the instrument is increased by off-setting one of the local oscillators by a small amount.

Terry, R.↗
NASA NTRS1991

Double-modulation spectroscopy of molecular ions - Eliminating the background in velocity-modulation spectroscopy

Velocity-modulation spectroscopy is an established technique for performing laser absorption spectroscopy of molecular ions in a discharge. However, such experiments are often plagued by a coherent background signal arising from emission from the discharge or from electronic pickup. Fluctuations in the background can obscure the desired signal. A simple technique using amplitude modulation of the laser and two lock-in amplifiers in series to detect the signal is demonstrated. The background and background fluctuations are thereby eliminated, facilitating the detection of molecular ions.

Lan, Guang↗
NASA NTRS2003

Characterization of L-Band RFI and Implications for Mitigation Techniques

We describe measurements of radio frequency interference (RFI) in the 1200-1800 MHz band as observed from NASA s P-3 research aircraft during a flight along the Mid-Atlantic coast of the U.S. at altitudes of 2,000 and 20,000 ft. Both power spectra and coherently-sampled waveform data were obtained. Our results indicate that the spectrum below 1400 MHz is typically dominated by pulses from ground based radars, which, while very strong, individually have transmit duty cycles of on the order of 0.1%. We detect but are unable to identify some relatively weak intermittent RFI inside the 20 MHz protected band centered at 1413 MHz. We detect no significant RFI above 1420 MHz, but the limited sensitivity of this particular experiment makes it impossible to rule out the presence of RFI at levels damaging to total power radiometry. Implications for radiometer design, including possible active countermeasures for RFI mitigation, are discussed.

Ellingson, Steven W.↗
DOE OSTI2020

A Scintillating Xenon Bubble Chamber for Dark Matter Detection. Final Report

This report describes the progress in the search for particle dark matter achieved under DOE award DE-SC0012161, as well as the invention of a new dark matter and neutrino detection technique. Work supported by this award follows in three distinct thrusts: (1) the successful completion of the Generation-1 Direct Detection experiment PICO-60, which set the world-leading limit on the spin-dependent coupling of dark matter to protons and achieved a precise understanding of the response of bubble chambers to nuclear-recoil signals and electron-recoil backgrounds; (2) the construction of the Generation-2 Direct Detection experiment LZ, which will soon be the world's most sensitive dark matter detector; and (3) the demonstration of the first scintillating bubble chamber. The development of a scintillating liquid noble bubble chamber was the primary goal of the proposed work, with the aim of combining the excellent background rejection of a PICO-style bubble chamber with the event-by-event energy resolution of a liquid-noble detector such as LZ. This work produced the first ever observation of coincident scintillation and bubble nucleation by a nuclear recoil in a superheated fluid and also revealed an unexpected benefit to the use of noble liquids in a bubble chamber, namely the ability to increase the degree of superheat by an order of magnitude beyond that achievable in PICO-style detectors while maintaining PICO's world-leading background rejection. This discovery has led to new projects in the US and Canada, developing noble liquid bubble chambers both as detectors for low-mass dark matter and as detectors of coherent elastic neutrino-nucleus scattering (CEvNS) by neutrinos produced at nuclear reactors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Quasiparticle excitations in a one-dimensional interacting topological insulator: Application for dopant-based quantum simulation

Here, we study the effects of electron-electron interactions on the charge excitation spectrum of the spinful Su-Schrieffer-Heeger (SSH) model, a prototype of a one-dimensional bulk obstructed topological insulator. In view of recent progress in the fabrication of dopant-based quantum simulators we focus on experimentally detectable signatures of interacting topology in finite lattices. To this end we use Lanczos-based exact diagonalization to calculate the single-particle spectral function in real space which generalizes the local density of states to interacting systems. Its spatial and spectral resolution allows for the direct investigation and identification of edge states. By studying the noninteracting limit, we demonstrate that the topological in-gap states on the boundary are robust against both finite-size effects as well as random bond and onsite disorder which suggests the feasibility of simulating the SSH model in engineered dopant arrays in silicon. While edge excitations become zero-energy spinlike for any finite interaction strength, our analysis of the spectral function shows that the single-particle charge excitations are gapped out on the boundary. Despite the loss of topological protection, we find that these edge excitations are quasiparticlelike as long as they remain within the bulk gap. Above a critical interaction strength of U c ≈5t these quasiparticles on the boundary lose their coherence which is explained by the merging of edge and bulk states. This is in contrast to the many-body edge excitations which survive the limit of strong coupling, as established in the literature. Our findings show that for moderate repulsive interactions the nontrivial phase of the interacting SSH model can be detected through remnant signatures of topological single-particle states using single-particle local measurement techniques such as scanning tunneling spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Initial transient stage of pin-to-pin nanosecond repetitively pulsed discharges in air

In this work, evolution of parameters of nanosecond repetitively pulsed (NRP) discharges in pin-to-pin configuration in air was studied during the transient stage of initial 20 discharge pulses. Gas and plasma parameters in the discharge gap were measured using coherent microwave scattering, optical emission spectroscopy, and laser Rayleigh scattering for NRP discharges at repetition frequencies of 1, 10, and 100 kHz. Memory effects (when perturbations induced by the previous discharge pulse would not decay fully until the subsequent pulse) were detected for the repetition frequencies of 10 and 100 kHz. For 10 kHz NRP discharge, the discharge parameters experienced significant change after the first pulse and continued to substantially fluctuate between subsequent pulses due to rapid evolution of gas density and temperature during the 100 μs inter-pulse time caused by intense redistribution of the flow field in the gap on that time scale. For 100 kHz NRP discharge, the discharge pulse parameters reached a new steady-state at about five pulses after initiation. Further, this new steady-state was associated with well-reproducible parameters between the discharge pulses and substantial reduction in breakdown voltage, discharge pulse energy, and electron number density in comparison to the first discharge pulse. For repetition frequencies 1–100 kHz considered in this work, the memory effects can be likely attributed to the reduction in gas number density and increase in the gas temperature that cannot fully recover to ambient conditions before subsequent discharge pulses.

42 ENGINEERING↗
DOE OSTI2020

Spatial noise correlations in a Si/SiGe two-qubit device from Bell state coherences

Here, we study spatial noise correlations in a Si/SiGe two-qubit device with integrated micromagnets. Our method relies on the concept of decoherence-free subspaces, whereby we measure the coherence time for two different Bell states, designed to be sensitive only to either correlated or anticorrelated noise, respectively. From these measurements we find weak correlations in low-frequency noise acting on the two qubits, while no correlations could be detected in high-frequency noise. We expect nuclear spin noise to have an uncorrelated nature. A theoretical model and numerical simulations give further insight into the additive effect of multiple independent (anti)correlated noise sources with an asymmetric effect on the two qubits as can result from charge noise. Such a scenario in combination with nuclear spins is plausible given the data and the known decoherence mechanisms. This work is highly relevant for the design of optimized quantum error correction codes for spin qubits in quantum dot arrays, as well as for optimizing the design of future quantum dot arrays.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1972

Lunar subsurface exploration with coherent radar.

The Apollo Lunar Sounder Experiment that is scheduled to orbit the moon on Apollo 17 consists of a three frequency coherent radar system and an optical recorder. The coherent radar can be used to measure both phase and amplitude characteristics of the radar echo. Measurement methods that are related to the phase and amplitude will be used to determine the surface profile, locate subsurface features and ascertain near surface electrical properties of the lunar surface. The key to the coherent radar measurement is a highly stable oscillator that preserves an accurate phase reference (2 or 3 electrical degrees) over a long period of time. This reference provides a means for reducing surface clutter so that subsurface features are more easily detected and also provides a means of measuring range to the surface to within a fraction of a wavelength.

Brown, W. E., Jr.↗
NASA NTRS1988

Vision sensing techniques in aeronautics and astronautics

The close relationship between sensing and other tasks in orbital space, and the integral role of vision sensing in practical aerospace applications, are illustrated. Typical space mission-vision tasks encompass the docking of space vehicles, the detection of unexpected objects, the diagnosis of spacecraft damage, and the inspection of critical spacecraft components. Attention is presently given to image functions, the 'windowing' of a view, the number of cameras required for inspection tasks, the choice of incoherent or coherent (laser) illumination, three-dimensional-to-two-dimensional model-matching, edge- and region-segmentation techniques, and motion analysis for tracking.

Hall, E. L.↗