Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud boundaries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

First results from the crop identification technology assessment for remote sensing /CITARS/

The CITARS task design, including objectives, analysis methodology and experimental procedures, is described and first results from this effort are presented. The extensive ground truth data set acquired for the CITARS task is described and discussed in some detail. Results of the accuracy tests for the photo interpretative CITARS ground truth are given. Results of the assessment of the ERTS MSS data for cloud cover and electronic quality are presented. Some results of the geometric correction and registration of the time sequential CITARS ERTS data are given. Finally, the field boundary selection problem is addressed and the results of the use of new technology for boundary selection are presented.

Hall, F. G.↗

Study of sensor spectral responses and data processing algorithms and architectures for onboard feature identification

A computational model of the deterministic and stochastic processes involved in remote sensing is used to study spectral feature identification techniques for real-time onboard processing of data acquired with advanced earth-resources sensors. Preliminary results indicate that: Narrow spectral responses are advantageous; signal normalization improves mean-square distance (MSD) classification accuracy but tends to degrade maximum-likelihood (MLH) classification accuracy; and MSD classification of normalized signals performs better than the computationally more complex MLH classification when imaging conditions change appreciably from those conditions during which reference data were acquired. The results also indicate that autonomous categorization of TM signals into vegetation, bare land, water, snow and clouds can be accomplished with adequate reliability for many applications over a reasonably wide range of imaging conditions. However, further analysis is required to develop computationally efficient boundary approximation algorithms for such categorization.

Huck, F. O.↗

VAS temperature retrievals for NASA special network observations of 6 March 1982

VAS retrieval capability was studied. A mesoscale event consisting of a rapidly moving temperature perturbation with strong horizontal wind shear but shallow vertical extent occurred over Texas. The mesoscale event passed through the special radiosonde network and was documented with three hourly measurements. The event occurred behind a cold frontal cloud band during clear conditions. The event was accompanied by large skin temperature changes as the day progressed. This combination allows the testing of two important aspects of the retrieval algorithms with minimal cloud contamination and good ground truth. The first aspect concerns the horizontal and vertical resolving power of the retrievals and the second aspect concerns sensitivity to the boundary term. The NASA special network radiosonde is proven to be useful. It is demonstrated that: the VAS is capable, of delineating a mesoscale, normal retrieval procedure has the deficiency of oversmoothing, but this can be corrected, to document first quess dependence, and a superior data set to evolve better techniques for treating the surface boundary problem.

Hayden, C. M.↗

Near-Earth Interplanetary Coronal Mass Ejections During Solar Cycle 23 (1996 - 2009): Catalog and Summary of Properties

In a previous study (Cane and Richardson, J. Geophys. Res. l08(A4), SSH6-1, we investigated the occurrence of interplanetary coronal mass ejections in the near-Earth solar wind during 1996 - 2002, corresponding to the increasing and maximum phases of solar cycle 23, and provided a "comprehensive" catalog of these events. In this paper, we present a revised and updated catalog of the approx. =300 near-Earth ICMEs in 1996-2009, encompassing the complete cycle 23, and summarize their basic properties and geomagnetic effects. In particular, solar wind .. composition and charge state observations are now considered when identifying the ICMEs. In general, these additional data confirm the earlier identifications based predominantly on other solar wind plasma and magnetic field parameters. However, the boundaries of ICME-like plasma based on charge state/composition data may deviate significantly from those based on conventional plasma/magnetic field parameters. Furthermore, the much studied "magnetic clouds", with flux-rope-like magnetic field configurations, may form just a substructure of the total ICME interval.

Richardson, I. G.↗

Assessment of OMI Near-UV Aerosol Optical Depth over Land

This is the first comprehensive assessment of the aerosol optical depth (AOD) product retrieved from the near-UV observations by the Ozone Monitoring Instrument (OMI) onboard the Aura satellite. The OMI-retrieved AOD by the ultraviolet (UV) aerosol algorithm (OMAERUV version 1.4.2) was evaluated using collocated Aerosol Robotic Network (AERONET) level 2.0 direct Sun AOD measurements over 8 years (2005-2012). A time series analysis of collocated satellite and ground-based AOD observations over 8 years shows no discernible drift in OMI's calibration. A rigorous validation analysis over 4 years (2005-2008) was carried out at 44 globally distributed AERONET land sites. The chosen locations are representative of major aerosol types such as smoke from biomass burning or wildfires, desert mineral dust, and urban/industrial pollutants. Correlation coefficient (p) values of 0.75 or better were obtained at 50 percent of the sites with about 33 percent of the sites in the analysis reporting regression line slope values larger than 0.70 but always less than unity. The combined AERONET-OMAERUV analysis of the 44 sites yielded a p of 0.81, slope of 0.79, Y intercept of 0.10, and 65 percent OMAERUV AOD falling within the expected uncertainty range (largest of 30 percent or 0.1) at 440 nanometers. The most accurate OMAERUV retrievals are reported over northern Africa locations where the predominant aerosol type is desert dust and cloud presence is less frequent. Reliable retrievals were documented at many sites characterized by urban-type aerosols with low to moderate AOD values, concentrated in the boundary layer. These results confirm that the near-ultraviolet observations are sensitive to the entire aerosol column. A simultaneous comparison of OMAERUV, Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue, and Multiangle Imaging Spectroradiometer (MISR) AOD retrievals to AERONET measurements was also carried out to evaluate the OMAERUV accuracy in relation to those of the standard aerosol satellite products. The outcome of the comparison indicates that OMAERUV, MODIS Deep Blue, and MISR retrieval accuracies in arid and semiarid environments are statistically comparable.

aerosol optical depth↗

In Situ Observations and Sampling of Volcanic Emissions with Unmanned Aircraft: A NASA/UCR Case Study at Turrialba Volcano, Costa Rica

Burgeoning new technology in the design and development of robotic aircraft-unmanned aerial vehicles (UAVs)-presents unprecedented opportunities for the volcanology community to observe, measure, and sample eruption plumes and drifting volcanic clouds in situ. While manned aircraft can sample dilute parts of such emissions, demonstrated hazards to air breathing, and most particularly turbine, engines preclude penetration of the zones of highest ash concentrations. Such areas within plumes are often of highest interest with respect to boundary conditions of applicable mass-loading retrieval models, as well as Lagrangian, Eulerian, and hybrid transport models used by hazard responders to predict plume trajectories, particularly in the context of airborne hazards. Before the 2010 Ejyafyallajokull eruption in Iceland, ICAO zero-ash-tolerance rules were typically followed, particularly for relatively uncrowded Pacific Rim airspace, and over North and South America, where often diversion of aircraft around ash plumes and clouds was practical. The 2010 eruption in Iceland radically changed the paradigm, in that critical airspace over continental Europe and the United Kingdom were summarily shut by local civil aviation authorities and EURO CONTROL. A strong desire emerged for better real-time knowledge of ash cloud characteristics, particularly ash concentrations, and especially for validation of orbital multispectral imaging. UAV platforms appear to provide a viable adjunct, if not a primary source, of such in situ data for volcanic plumes and drifting volcanic clouds from explosive eruptions, with prompt and comprehensive application to aviation safety and to the basic science of volcanology. Current work is underway in Costa Rica at Turrialba volcano by the authors, with the goal of developing and testing new small, economical UAV platforms, with miniaturized instrument payloads, within a volcanic plume. We are underway with bi-monthly deployments of tethered SO2-sondes and are in the planning stages for the deployment of the SIERRA UAV to our site in March 2013. We will be conducting in situ observations simultaneously with ASTER orbital multispectral TIR data acquisitions, in order to compare in situ measurements with estimates of SO2 mass loading and dispersion derived from ASTER data. Though small UAVs are now being considered for use in active volcanic areas for in situ sampling of emissions (e.g., efforts by our group, and by our colleagues at the INGV in Italy and the Applied Science University in Dusseldorf, Germany, and others in the United Kingdom and Iceland), and also for remote sensing, much more needs to be done in the way of instrument development, and in developing small UAVs for both low altitude (tropospheric) and high altitude (stratospheric) applications. In particular, the development of all weather and day/night operational flight capabilities in close proximity to hazardous topography is crucial to a truly responsive volcano in situ measurement system. Finally, it is imperative that national civil aviation authorities recognize the unique benefits of such platforms. It is important that authorities understand that severely restricting or not deploying such tools in airspace over restless volcanoes or within eruption plumes, ostensibly because of the perceived (small) risk that such unmanned aircraft pose to manned air operations, itself poses a bigger transcendental risk to proximal populations and particularly to the aviation community, itself.

Volcanic Ash Advisory Centers (VAACs)↗

Diurnal variation in the turbulent structure of the cloudy marine boundary layer during FIRE 1987

During the 1987 FIRE marine stratocumulus experiment the U.K. Meteorological Office operated a set of turbulence probes attached to the tether cable of a balloon based on San Nicolas Island. Typically six probes were used; each probe is fitted with Gill propeller anemometers, a platinum resistance thermometer and wet and dry thermistors, to permit measurements of the fluxes of momentum, heat, and humidity. The orientation of each probe is determined from a pair of inclinometers and a three-axis magnetometer. Sufficient information is available to allow the measured wind velocities to be corrected for the motion of the balloon. On the 14 to 15 July measurements were made over the period 1530 to 1200 UTC and again, after a short break for battery recharging and topping-up the balloon, between 0400 to 0900 UTC. Data were therefore recorded from morning to early evening, and again for a period overnight. Six probes were available for the daytime measurements, five for the night. Data were recorded at 4 Hz for individual periods of a little over an hour. The intention was to keep a minimum of one probe at or just above cloud top; small changes in balloon height were necessary to accommodate changes in inversion height. The ability of the balloon system to make simultaneous measurements at several levels allows the vertical structure of the boundary layer to be displayed without resort to composites. Turbulent statistics were calculated from 2 hour periods, one straddling local noon and one at night. These were subdivided into half-hour averaging intervals for the evaluation of variances and fluxes.

Hignett, Phillip↗

Evaluation and Applications of Multi-Instrument Boundary-Layer Thermodynamic Retrievals

Recent reports have highlighted the need for improved observations of the boundary layer. In this study, we explore the combination of ground-based active and passive remote sensors deployed for thermodynamic profiling to analyze various boundary-layer observation strategies. Optimal-estimation retrievals of thermodynamic profiles from Atmospheric Emitted Radiance Interferometer (AERI) observed spectral radiance are compared with and without the addition of active sensor observations from a May–June 2017 observation period at the Atmospheric Radiation Measurement–Southern Great Plains Site. In all, three separate thermodynamic retrievals are considered here: retrievals including AERI data only, retrievals including AERI data and Vaisala water vapour differential absorption lidar data, and retrievals including AERI data and Raman lidar data. First, the three retrievals are compared to each other and to reference radiosonde data over the full observation period to get a bulk understanding of their differences and characterize the impact of clouds on these retrieved profiles. These analyses show that the most significant differences are in the water vapour field, where the active sensors are better able to represent the moisture gradient in the entrainment zone near boundary layer top. We also explore how differences in retrievals may impact results of applied analyses including land–atmosphere coupling, convection indices, and severe storm environmental characterization. Overall, adding active sensors to the optimal-estimation retrieval showed some added information, particularly in the moisture field. Given the costs of such platforms, the value of that added information must be weighed for the application at hand.

boundary-layer observation↗

Research program on the Manson impact structure, Iowa

At or near the end of the Cretaceous, at least two large impact events occurred in the western hemisphere. One impact formed the 180-km diameter Chicxulub crater on the northern tip of the Yucatan peninsula. Another formed the 35-km diameter Manson structure in western Iowa. Several lines of evidence, including the chemical and isotopic composition of glass found in the K/T boundary layer at sites in the Gulf of Mexico and Caribbean region, the regional variation in thickness and the size of spherules in the K/T boundary layer, and indications at and near the boundary of disturbance and deposition of beds by giant waves in the Gulf of Mexico, point to Chicxulub as a major source of K/T boundary material, including a lower layer of clay at K/T boundary sites in western North America. The size, abundance, and mineral and lithic composition of shocked grains from an upper K/T boundary layer found at western North American sites, on the other hand, point to Manson as a possible source crater. More than one impact seems to be indicated by the K/T boundary stratigraphy in western North America, and present constraints on the age of the Manson structure suggest that it, as well as Chicxulub, may be a K/T boundary crater. Multiple craters produced over a relatively short interval of time are much more likely to have been formed by impact of comets rather than by impact of asteroids. Among likely mechanisms that could have produced multiple craters at or near the time of the K/T boundary are as follows: (1) splitting of a comet shortly before impact with Earth (impacts may have been spaced over about an hour), (2) fragmentation of a very large, Sun-grazing, periodic comet to form a compact stream of comets that intercepted the Earth's orbit (impacts may have been spread over about a century), and (3) perturbation of the Oort comet cloud by a passing massive object to form a comet shower in the inner solar system (impacts may have been spread over about a million years). Only in the first two cases are the impacts likely to have been close enough in time to contribute to the observed K/T boundary layers. All mechanisms could have produced many more than two craters.

Shoemaker, E. M.↗

First Scientific Working Group Meeting of Airborne Doppler Lidar Wind Velocity Measurement Program, appendix J

Three projects are suggested which could be done using the Doppler lidar. The first is a cooperative effort at BAO, the purpose of which is to check out instrumentation and contribute to boundary layer investigations at BAO. The second concerns unintended weather modification. Its purpose is to detect mechanisms by which regions of industry and urbanization modify weather. The cirrus cloud study proposes to characterize cirrus clouds by their lidar signal and to compare lidar and visually observed characteristics.

Koenig, L. R.↗

Models for application of radiation boundary condition for MHD waves in collapse calculations

The problem of reflection of magnetohydrodynamic (MHD) waves at the boundary of a numerical grid has to be resolved in order to obtain reliable results for the end state of the (isothermal) collapse of a rotating, magnetic protostellar cloud. Since the goal of investigating magnetic braking in collapse simulations is to see if the transport of angular momentum via alfven waves is large enough to solve the angular momentum problem an approximation that artificially suppresses large amplitudes in the MHD waves can be self-defeating. For this reason, four alternate methods of handling reflected waves where no assumptions are made regarding the amplitudes of the waves were investigated. In order to study this problem (of reflection) without interference from other effects these methods were tried on two simpler cases. The four methods are discussed.

Vanajakshi, C. T.↗

Linear Multivariable Regression Models for Prediction of Eddy Dissipation Rate from Available Meteorological Data

Linear multivariable regression models for predicting day and night Eddy Dissipation Rate (EDR) from available meteorological data sources are defined and validated. Model definition is based on a combination of 1997-2000 Dallas/Fort Worth (DFW) data sources, EDR from Aircraft Vortex Spacing System (AVOSS) deployment data, and regression variables primarily from corresponding Automated Surface Observation System (ASOS) data. Model validation is accomplished through EDR predictions on a similar combination of 1994-1995 Memphis (MEM) AVOSS and ASOS data. Model forms include an intercept plus a single term of fixed optimal power for each of these regression variables; 30-minute forward averaged mean and variance of near-surface wind speed and temperature, variance of wind direction, and a discrete cloud cover metric. Distinct day and night models, regressing on EDR and the natural log of EDR respectively, yield best performance and avoid model discontinuity over day/night data boundaries.

MCKissick, Burnell T.↗

Ocean-Atmosphere Interaction Over Agulhas Extension Meanders

Many years of high-resolution measurements by a number of space-based sensors and from Lagrangian drifters became available recently and are used to examine the persistent atmospheric imprints of the semi-permanent meanders of the Agulhas Extension Current (AEC), where strong surface current and temperature gradients are found. The sea surface temperature (SST) measured by the Advanced Microwave Scanning Radiometer-Earth Observing System (AMSR-E) and the chlorophyll concentration measured by the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) support the identification of the meanders and related ocean circulation by the drifters. The collocation of high and low magnitudes of equivalent neutral wind (ENW) measured by Quick Scatterometer (QuikSCAT), which is uniquely related to surface stress by definition, illustrates not only the stability dependence of turbulent mixing but also the unique stress measuring capability of the scatterometer. The observed rotation of ENW in opposition to the rotation of the surface current clearly demonstrates that the scatterometer measures stress rather than winds. The clear differences between the distributions of wind and stress and the possible inadequacy of turbulent parameterization affirm the need of surface stress vector measurements, which were not available before the scatterometers. The opposite sign of the stress vorticity to current vorticity implies that the atmosphere spins down the current rotation through momentum transport. Coincident high SST and ENW over the southern extension of the meander enhance evaporation and latent heat flux, which cools the ocean. The atmosphere is found to provide negative feedback to ocean current and temperature gradients. Distribution of ENW convergence implies ascending motion on the downwind side of local SST maxima and descending air on the upwind side and acceleration of surface wind stress over warm water (deceleration over cool water); the convection may escalate the contrast of ENW over warm and cool water set up by the dependence of turbulent mixing on stability; this relation exerts a positive feedback to the ENW-SST relation. The temperature sounding measured by the Atmospheric Infrared Sounder(AIRS) is consistent with the spatial coherence between the cloud-top temperature provided by the International Satellite Cloud Climatology Project (ISCCP) and SST. Thus ocean mesoscale SST anomalies associated with the persistent meanders may have a long-term effect well above the midlatitude atmospheric boundary layer, an observation not addressed in the past.

Atmospheric Infrared Sounder (AIRS)↗

Lidar measurements of cloud extinction coefficient distribution and its forward scattering phase function according to multiply scattered lidar returns

The study of the inversion algorithm for the single scatter lidar equation, for quantitative determination of cloud (or aerosol) optical properties, has received much attention over the last thirty years. Some of the difficulties associated with the solution of this equation are not yet solved. One problem is that a single scatter lidar equation has two unknowns. Because of this, the determination of the far-end boundary value, in the case of Klett's algorithm, is a problem if the atmosphere is optically inhomogeneous. Another difficulty concerns multiple scattering. There is a large error in the extinction distribution solution, in many cases, if only the single scattering component is considered, while neglecting the multiple scattering component. However, the use of multiple scattering in the remote sensing of aerosol or cloud optical properties is promising. In our early study, an inversion method for simultaneous determination of the cloud (or aerosol) Extinction Coefficient Distribution (ECD) and its Forward Scattering Phase Function (FSPF) was proposed according to multiply scattered lidar returns with two fields of view for the receiver. The method is based on a parameterized multiple scatter lidar equation. This paper is devoted to further numerical tests and an experimental study of lidar measurements of cloud ECD and FSPF using this method.

Qiu, Jinhuan↗

Influence of ocean surface conditions on atmospheric vertical thermodynamic structure and deep convection

The authors analyze the influence of Sea Surface Temperature (SST) and surface wind divergence on atmospheric thermodynamic structure and the resulting effects on the occurrence of deep convection using National Meteorological Center radiosonde data and International Satellite Cloud Climatology Program data for July 1983-July 1985. The onset of deep convection requires not only the existence of positive convective available potential energy (CAPE), but also an unstable planetary boundary layer (PBL). A stable PBL is observed to suppress deep convection even when CAPE is positive. Variations of SST have a major effect on CAPE, but surface wind divergence can also affect deep convection by changing the lapse rate in the lower troposphere and humidity in the PBL. Specifically, when SST is greater than or equal to 28 C, CAPE is always positive, and surface wind divergence does not qualitatively change the buoyancy profile above the PBL. Strong surface wind divergence, however, stabilizes the PBL so as to suppress the initiation of deep convection. In warm SST regions, CAPE is greater than 0 regardless of assumptions about condensate loading, although the pseudoadiabatic limit is more consistent with the observed deep convection than the reversible moist-adiabatic limit under these circumstances. When SST is less than 27 C, CAPE is usually negative and inhibits convection, but strong surface wind convergence can destabilize the inversion layer and moisten the PBL enough to make the atmosphere neutrally stable in the mean. As a result, deep convection is generally enhanced either when SST is greater than or equal to 28 C in the absence of strong surface wind divergence or when strong surface wind convergence occurs even if SST is less than 27 C. The anomalous suppression of deep convection in the warm area of the equatorial west Pacific lying between the intertropical convergence zone (ITCZ) and south Pacific convergence zone (SPCZ) is probably caused by dryness in the PBL and an inversion in that area. The seasonal cycles of deep convection and surface wind divergence are in phase with the maximum solar radiation and lead SST for one to three months in the central Pacific. The change of PBL relative humidity plays a critical role in the changeover to convective instability in this case. The seasonal change of deep convection and associated clouds seems not to have important effects on the seasonal change of local SST in the central Pacific.

Fu, Rong↗

Boundary conditions for the paleoenvironment: Chemical and physical processes in the pre-solar nebula

Detailed study of the first interstellar hydrocarbon ring, cyclopropenylidene (C3H2), is continuing. The singly deuterated isotope of this molecule, C3HD, was observed in several cold interstellar clouds. The results of a large survey for C3H2 in galactic sources of various types will soon be completed. It appears that cyclopropenylidene is present in virtually all interstellar clouds of at least moderate density. In order to make the first determinations of the CO2/CO abundance ratio in interstellar sources, observations of protonated CO2 were pursued. The spectrum from 18.5 to 22 GHz for several interstellar clouds is being systematically measured. Particular attention is being given to the cold, dark clouds TMC-1 and L124N, which may be formation sites for solar mass stars. The phenomena of maser emission from molecules of methanol is being studied in certain interstellar clouds. A comparison of 1 millimeter continuum emission from dust with the column density of carbon monoxide as determined from the rare C(18)O isotope for 4 molecular clouds in the Galaxy is nearing completion. Papers published during the period of this report are listed.

Irvine, William M.↗

Study of Antarctic Blowing Snow Storms Using MODIS and CALIOP Observations With a Machine Learning Model

As a common phenomenon over Antarctica, blowing snow (BLSN), especially the large BLSN storms, play an important role in the Antarctic surface mass balance, radiation budget, and planetary boundary layer processes. This study presents the work on BLSN storm identification and analysis with observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard the Aqua satellite. Spectral analysis shows that BLSN identification is feasible with MODIS daytime data. A random forest machine learning model is developed and observations from the Cloud‐Aerosol Lidar with Orthogonal Polarization are used for training. Model performance results show that machine‐learning based classification can achieve over 90% overall accuracy when classifying MODIS pixels into cloud, clear, and BLSN categories. The machine learning model is applied to MODIS observations during the month of October 2009 for BLSN storm analysis. Results show that the size of BLSN storms has a large spectrum and can reach hundreds of thousands km2. The MODIS based BLSN storm frequency map extends the Cloud‐Aerosol Lidar and Infrared Pathfinder Satellite Observations coverage limit from 82°S to the South Pole. A BLSN storm belt, which extends from the South Pole region to the coastal area between 130°E and 160°E along the Transantarctic Mountains, provides a potential pathway of snow transport. These results are important in improving the understanding of BLSN impact on Antarctic surface mass balance and boundary layer processes.

Antarctic↗

Properties of African squall lines inferred from time-lapse satellite imagery

Analysis of 48 h of time-lapse satellite imagery of a family of squall lines in Africa links the phenomena with a characteristic cloud cluster and with a wind field perturbation which is enhanced in passing through an African easterly wave trough. A thin 'arc line' of low-level developing cumulus, a salient feature of the squall lines on the imagery, is shown to occur at the front boundary of the mesoscale/convective scale subsidence. Analysis of the wind field indicates that a squall line is associated with a vorticity center in the mid-level easterly flow which accompanies the mesoscale subsidence which, in turn, contributes to further forced ascent of subcloud air along the front of the squall line into convective towers which merge into an extensive anvil. The squall lines evolved through a life cycle of 6 to 12 h while the larger cloud cluster and wind perturbation lasted over 48 h. The magnitude of the vertical mass exchange suggests that squall-line families contribute significantly to the tropical energy balance.

Fortune, M.↗