Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analysis programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Low-Energy Study of Gamma-Ray Bursts Having Spectral Line Features

Gamma-ray bursts (GRBs) are energetic, short-duration emissions of gamma-rays. The Burst and Transient Source Experiment (BATSE) that was onboard NASA s Compton Gamma-Ray Observatory has done much to advance our understanding of GRBs. Perhaps foremost is to establish that GRBs originate from astronomical sources that exist well beyond our galaxy. Another area in which BATSE has been instrumental is to provide high-resolution data that can be used in spectral studies. Before BATSE, there were many reports of GRB spectra containing what appeared to be spectral absorption lines, whereas Briggs, after an extensive computer search of 117 bright BATSE GRBs, reported finding only one case that might be an absorption line and ten cases that might be emission lines. None of the eleven BATSE cases were definitively identified as spectral lines, and Briggs indicated reasons as to why the pre-BATSE reports should not be taken as conclusive. It remains an open question as to what these spectral-like features are, or if they are even real. The purpose of this work is, for the subset of the eleven BATSE GRBs for which low-energy data are available from two BATSE's Spectroscopy Detectors (SDs), to include these data in the spectral analysis. Such a study will provide additional constraints on the model spectral functions to better ascertain the reality of the line features. The spectral analysis program used was RMFIT. Of the six GRBs that met the selection criteria, the analysis was performed on only three of them due to a lack of time.

Pangia, Michael J.↗

Thermal-Mechanic Modeling of Fusion Components Using The MOOSE Framework

With fusion energy rapidly developing, there is a great need for an open source tool that can rapidly model different fusion tokamak designs. The open-source codes Multiphysics Object Oriented Simulation Environment (MOOSE), Tritium Migration Analysis Program Version 8 (TMAP8) , and Fusion ENergy Integrated Multiphysi-X (FENIX) are being used to demonstrate thermal-mechanic modeling of fusion components. In this study, an analysis is done on the fusion nuclear science facility (FNSF) blanket, and ITER toroidal magnet and diverter mono block. This study will lay the groundwork for fusion component analysis in the MOOSE framework and FENIX program.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plastic deformation of engines and other nonlinear structures

Plastic Analysis Capability for Engines (BOPACE3D) in nonlinear stress-analysis program based on very general family of isoparametric finite elements. Although development of BOPACE3D has been heavily influenced by requirements for engine analysis (in particular Space Shuttle main engine), it is general program applicable to many nonlinear structures.

Vos, R. G.↗

Spectrum orbit utilization program technical manual SOUP5 Version 3.8

The underlying engineering and mathematical models as well as the computational methods used by the SOUP5 analysis programs, which are part of the R2BCSAT-83 Broadcast Satellite Computational System, are described. Included are the algorithms used to calculate the technical parameters and references to the relevant technical literature. The system provides the following capabilities: requirements file maintenance, data base maintenance, elliptical satellite beam fitting to service areas, plan synthesis from specified requirements, plan analysis, and report generation/query. Each of these functions are briefly described.

Davidson, J.↗

General purpose computer programs for numerically analyzing linear ac electrical and electronic circuits for steady-state conditions

Digital computer programs determine steady-state performance characteristics of active and passive linear circuits. The ac analysis program solves the basic circuit parameters. The compiler program solves these circuit parameters and in addition provides a more versatile program by allowing the user to perform mathematical and logical operations.

Egebrecht, R. A.↗

Wind loads for bar-truss structures

An analysis method developed to calculate the wind loads on the nodes or joints of the truss type support structure of the 64 meter antenna is described. The method uses the CBAR element and GRID coordinate cards of the NASTRAN or IDEAS structural analysis programs as inputs to the computer model of the structure. Cross flow principles and vector analysis are also used in the analysis. The algorithms used are described and probable accuracy of the solution is discussed.

Katow, M. S.↗

Use of an engineering data management system in the analysis of Space Shuttle Orbiter tiles

This paper demonstrates the use of an engineering data management system to facilitate the extensive stress analyses of the Space Shuttle Orbiter thermal protection system. Descriptions are given of the approach and methods used (1) to gather, organize, and store the data, (2) to query data interactively, (3) to generate graphic displays of the data, and (4) to access, transform, and prepare the data for input to a stress analysis program. The relational information management system was found to be well suited to the tile analysis problem because information related to many separate tiles could be accessed individually from a data base having a natural organization from an engineering viewpoint. The flexible user features of the system facilitated changes in data content and organization which occurred during the development and refinement of the tile analysis procedure. Additionally, the query language supported retrieval of data to satisfy a variety of user-specified conditions.

Giles, G. L.↗

Research and technology: Report, FY 1982

Sensor systems, data analysis programs, agriculture and resources inventory survey through aerospace remote sensing (AgRISTARS), applied research and data analysis, joint research project, and testing and evaluation are reported.

Source record↗

HALOE science investigation

The Halogen Occulation Experiment (HALOE) gas response test simulations were completed using the HALOE spectroscopic instrument model. A new series of programs were written for routine repetitive runs of the spectroscopic model to make it more user friendly for certain studies. Some of the limitations of the model were eased for atmospheric studies. Atmospheric signal profiles were calculated for inclusion in the electronic model programs. Analysis of additional spectral bands of CO2 in the 3 micron region was continued. A program of measurement of the air broadened halfwidths of spectral lines in the nu (sub 3) fundamental band of CH4 was started and over 40 lines measured.

Benner, D. C.↗

Reliability analysis of large, complex systems using ASSIST

The SURE reliability analysis program is discussed as well as the ASSIST model generation program. It is found that semi-Markov modeling using model reduction strategies with the ASSIST program can be used to accurately solve problems at least as complex as other reliability analysis tools can solve. Moreover, semi-Markov analysis provides the flexibility needed for modeling realistic fault-tolerant systems.

Johnson, Sally C.↗

MSATT: Mars Surface and Atmosphere Through Time

The papers published here are based on a workshop entitled "Mars: Past, Present, and Future: Results from the MSATT Program." MSATT (Mars Surface and Atmosphere Through Time) was the last of the Mars data analysis programs and functioned mainly through a series of focused workshops, the final one being held at the Lunar and Planetary Institute in Houston, Texas on November 15-17, 1993. The program began and ended with workshops that brought the entire MSATT community together. Here you will find papers that address the geology, mineralogy, and meteorology of Mars in an effort to assess how the surface and atmosphere of this fascinating planet have evolved over time. Could early Mars have been warmed by a brighter young sun instead of a massive greenhouse effect? Were glaciers and hydrological cycles part of Mars' relatively recent past, or was aeolian activity responsible for the putative glacial features? Do the SNCs come from a single source region, or is more than one site involved? And what really are the properties of Martian soils and what do they tell us about the weathering environment? Clearly, these are difficult questions, but progress toward answers can be found in this issue. Also contained in this issue are a mix of theoretical and observational papers that deal with the general circulation of the current atmosphere, the factors that drive it (dust properties), and the role it plays in controlling the current climate system.

Source record↗

Reducing/Eliminating ESD Hazards During Pyro Operations

Several safety concerns have occurred during pyro operations at 30% or lower RH in the OPF area based on the increase of electrostatic discharge (ESD). These concerns targeted the safety of personnel, flight hardware, and ground support equipment (GSE). Two proposed methods considered to control ESDs during pyro operations at 30% or lower RH are the use of an ionizer blower and to increase the moisture content. In order to demonstrate that the ionizer is effective in neutralizing static charge, a series of experimental runs were conducted in the Electrostatics Laboratory located in the Operations & Checkout (O&C) Building at NASA Kennedy Space Center (KSC). The effectiveness of the ionizer blower was evaluated based upon the time lapse of a charged metal plate from initial 1000 to 400 volts. Distance, RH, and angle of attack were studied. A full factorial experiment (2(exp 3) = 8) was conducted. Since we did not have a statistical analysis program, such as SAS, available, calculations were done manually based on the method of ANOVA (Analysis of Variances), but R(exp 2) (fitness of curve) was not obtained. As conjectured, distance was found to be the major influencial variable. Therefore, we concluded that the best possible combination of situations would be to position the ionizer blower as close as possible and facing directly into the charged plate. This scenario resulted in the quickest discharge rate, which would be the most beneficial during pyro operations below 30% RH. The second method of increasing the moisture content in the work environment through a modification of the OPF ECS current configuration appeared to be dependent on budget constraints and currently not planned to be modified. Finally, some recommendations are discussed such as to test the ionizer in an actual field experiment with a mockup pyro connector and a technician with all the NASA KSC Safety-compliant PPE to assess the realistic effectiveness of the ionizer blower.

Soriano, Jose Francisco↗

Antenna Controller

A NASA-developed computer program has effected substantial savings in inclined orbit trackings for Research Concepts, Inc. Artificial Satellite Analysis Program (ASAP) allowed the company to avoid duplicating research and shortened the time needed to develop an R2000B antenna controller. The device controls a dish antenna for tracking a communications satellite and represents a significant advance because it provides an accurate, cost-effective way to track satellites in inclined orbits. These have been difficult and expensive to track.

Source record↗

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power densities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. The purpose of this work is to verify the power distribution results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

97 MATHEMATICS AND COMPUTING↗

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power desnities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. The purpose of this work is to verify the power distribution results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Software Verification of VARPOW

The VARPOW program is a post-processing utility program for DIF3D, specifically DIF3DVARIANT, and it was developed to provide interface files for the thermal analysis program DASSH. The basic methodology of VARPOW is to take the neutron and gamma flux (moments) calculated by DIF3D (or GAMSOR) and combine them with the heating (coefficient) cross sections to calculate the spatial power distributions using the DIF3DVARIANT spatial basis. VARPOW can use the output from GAMSOR (both steady state neutron and gamma flux calculations) or standard DIF3D/REBUS calculations (neutron flux only). The correct approach for defining the power distribution is to use GAMSOR as its purpose was to properly compute the gamma heating throughout the modeled domain. The power desnities calculated by VARPOW are broken into fuel, cladding and coolant terms for which isotope-wise categorization is needed. VARPOW has built in options the user can select for the isotope categorization or VARPOW can import a file that details the isotope categorization. VARPOW can export the solution in the polynomial basis of DIF3D-VARIANT or the monomial basis of DIF3D-VARIANT. Recently the clad neutron damage calculation capability was introduced into VARPOW, and it now allows a pathway to get distributions of clad DPA. The purpose of this work is to verify the power distribution, fast neutron flux and clad DPA results calculated by VARPOW from both the GAMSOR and DIF3D input options and verify that the input and output options are consistent with the manual. Hand calculation and independent numerical calculation are used for this verification work.

Zhong, Zhaopeng [Argonne National Laboratory (ANL)↗

Aerodynamic comparisons of STS-1 Space Shuttle entry vehicle

A conventional flight-test program, which slowly and cautiously approaches more severe flight conditions, was not possible with the Orbiter. On the first flight, the Orbiter entered the atmosphere at Mach 28 and decelerated through the Mach range. (The subsonic portion of flight was also flown by another orbiter vehicle during the Approach and Landing Test Program.) Certification for the first flight was achieved by an extensive wind-tunnel test and analysis program and by restricting the flight maneuvers severely. The initial flights of the orbiter were heavily instrumented for the purpose of obtaining accurate aerodynamic data. Even without maneuvers to excite the system, the first flight provided comparisons between flight and wind-tunnel-derived predicted data in the areas of aerodynamic performance, longitudinal trim, and reaction-control jet interaction. The aerodynamic performance comparisons are presented.

Young, J. C.↗

QUICK Interactive Graphics Analysis

Cross-section and body-line plots generated for error detection and analysis. FORTRAN 77 version of QUICK Interactive Graphics Analysis program QUIAGA, performs same operations as FORTRAN IV counterpart. QUIAGA displays aircraft QUICK geometry data to aid in detection and analysis of errors. QUICK-geometry data used to generate completelyanalytical aircraft geometry description for finite difference flow codes. QUIAGA program written in FORTRAN 77.

Townsend, J. C.↗