SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The principles of operation of Very Long Baseline Interferometry (VLBI) are discussed. The application of VLBI techniques for tracking lunar rover vehicles during the Apollo 16 and 17 missions is reported. A map of the Apollo 16 lunar rover track is provided. Charts are developed to show the incremental motion of the lunar vehicle during the mission.
The space shuttle rendezvous radar has a requirement to track cooperative and non-cooperative targets. For this reason the Lunar Module (LM) Rendezvous Radar was modified to incorporate the capability of tracking a non-cooperative target. The modifications are discussed. All modifications except those relating to frequency diversity were completed, and system tests were performed to confirm proper performance in the non-cooperative mode. Frequency diversity was added to the radar and to the special test equipment, and then system tests were performed. This last set of tests included re-running the tests of the non-cooperative mode without frequency diversity, followed by tests with frequency diversity and tests of operation in the original cooperative mode.
The stowage list and hardware tracking system, a computer based information management system, used in support of the space shuttle orbiter stowage configuration and the Johnson Space Center hardware tracking is described. The input, processing, and output requirements that serve as a baseline for system development are defined.
The problem of identifying constant and variable parameters in multi-input, multi-output, linear and nonlinear systems is considered, using the maximum likelihood approach. An iterative algorithm, leading to recursive identification and tracking of the unknown parameters and the noise covariance matrix, is developed. Agile tracking, and accurate and unbiased identified parameters are obtained. Necessary conditions for a globally, asymptotically stable identification process are provided; the conditions proved to be useful and efficient. Among different cases studied, the stability derivatives of an aircraft were identified and some of the results are shown as examples.
Heavy nuclei of the primary galactic radiation in space can have the same linear energy transfer yet greatly different lateral distribution patterns of the energy in the microstructure of tissue. Track structure thus presents itself as a new dosimetric parameter for HZE particles which is at present incompletely understood in its radiobiological significance. The theory of track structure distinguishes two regions: core and penumbra. The core is a narrow region with a radius far below 1 micron in tissue where energy deposition occurs mainly through excitations and collective oscillations of electrons. Energy density in the core accounts for slightly more than half the total LET. The penumbra surrounding the core extends laterally several to many microns depending on the energy of the primary. Energy density in the penumbra decreases steeply with the square of increasing radius. The relationships are illustrated with nuclear emulsion micrographs and plots of energy density profiles. The implications of the findings for a dosimetric system for HZE particles are discussed.
This functional design specification defines the total systems approach to meeting the requirements stated in the Detailed Requirements Document for Stowage List and Hardware Tracking System for the space shuttle program. The stowage list and hardware tracking system is identified at the system and subsystem level with each subsystem defined as a function of the total system.
A dual axis tracking using a multiloop critical task was set up to evaluate human performance. The effects of control stick variation and display formats are evaluated. A secondary loading was used to measure the degradation in tracking performance.
A laboratory study was conducted to investigate the effect of spurious simulator yaw motions on a pilot's control performance. A second objective was to compare the efficiency of static and dynamic simulator tracking in previously unexamined vehicle dynamics. Twelve airline pilots served as subjects in a moving-base flight simulator under congruent-motion, spurious-motion, and no-motion conditions. The results indicated a significant increase in the amount of error with increasing levels of spurious motion during the initially administered series of trials. The influence of spurious motion, however, was absent in a second series of trials. The data suggest that the pilots learned to compensate in their performance for the spurious inputs. It was also found that congruent visual and rotational cueing produced superior performance to that of tracking with visual information alone.
The integration of Doppler frequencies extracted from S-band communication and tracking signals received onboard an orbiting spacecraft provides a means of navigating on-orbit. This paper describes the one way Doppler tracking concept and two mechanizations which are being investigated by the Johnson Space Center to determine a suitable one way Doppler extraction technique for the Space Shuttle Orbiter and other advanced space systems. The designs of two breadboard models are outlined and measurement errors are discussed.
Information gained from track studies in lunar soils is reviewed. Soil maturity indices are compared and briefly discussed. Track methods to establish the layering chronology of lunar cores are also treated.
In new tracking loop, separate phase detection algorithm is incorporated for acquisition; programmed acquisition-to-track sequence includes automatic bandwidth switching. Additionally, system has very effective phase detection signal-to-noise ratio and can operate at any rate by changing master clock frequency. All system parameters remain constant.
Factors were examined which determine the amount of time delay acceptable in the visual feedback loop in flight simulators. Acceptable time delays are defined as delays which significantly affect neither the results nor the manner in which the subject 'flies' the simulator. The subject tracked a target aircraft as it oscillated sinusoidally in a vertical plane only. The pursuing aircraft was permitted five degrees of freedom. Time delays of from 0.047 to 0.297 second were inserted in the visual feedback loop. A side task was employed to maintain the workload constant and to insure that the pilot was fully occupied during the experiment. Tracking results were obtained for 17 aircraft configurations having different longitudinal short-period characteristics. Results show a positive correlation between improved handling qualities and a longer acceptable time delay.
The application is discussed of measurement techniques to captive flight flutter tests at the Supersonic Naval Ordnance Research Track (SNORT), U. S. Naval Ordnance Test Station, China Lake, California. The high-speed track, by its ability to prove the validity of design and to accurately determine the actual margin of safety, offers a unique method of flutter testing for the aircraft design engineer.
Techniques for recovering atmospheric refractivity profiles from simulated satellite-to-satellite tracking data are documented. Examples are given using the geometric configuration of the ATS-6/NIMBUS-6 Tracking Experiment. The underlying refractivity model for the lower atmosphere has the spherically symmetric form N = exp P(s) where P(s) is a polynomial in the normalized height s. For the simulation used, the Herglotz-Wiechert technique recovered values which were 0.4% and 40% different from the input values at the surface and at a height of 33 kilometers, respectively. Using the same input data, the model fitting technique recovered refractivity values 0.05% and 1% different from the input values at the surface and at a height of 50 kilometers, respectively. It is also shown that if ionospheric and water vapor effects can be properly modelled or effectively removed from the data, pressure and temperature distributions can be obtained.
The prelaunch planning and subsequent analysis of tracking operations during the Viking 1 launch phase were described. The launch phase tracking procedures were intensively considered and conservatively designed to accommodate even the most unfavorable of launch possibilities. These procedures were successfully implemented and strongly contributed to the highly successful launch of Viking 1.
The activities and progress in the satellite tracking and earth dynamics research during the first half of calendar year 1975 are described. Satellite tracking network operations, satellite geodesy and geophysics programs, GEOS 3 project support, and atmospheric research are covered.
The Doppler tracking experiment was designed to test the feasibility of improved mapping of earth gravity field anomalies by means of the low-low satellite-to-satellite tracking method. All prescribed data have been retrieved and are currently being reduced and analyzed. Baseline data taken while the docking module was still attached to the command and service module indicated that the equipment operated satisfactorily. The efficacy of the two frequency ionospheric correction method has been demonstrated, and preliminary reduction of a data sample has successfully removed extraneous signatures down to the 50-millihertz level, where the rotational motion of the docking module is revealed. Photographs of the docking module, taken shortly after jettison, show that its rotation was stable.
An operational airborne ballistic camera tracking system was tested for operational and data reduction feasibility. The acquisition and data processing requirements of the system are discussed. Suggestions for future improvements are also noted. A description of the data reduction mathematics is outlined. Results from a successful reentry test mission are tabulated. The test mission indicated that airborne ballistic camera tracking systems are feasible.